* Add a new board, the BCom WinNET P680

* Add a function to change the 24/48Mhz clock input selector on the Winbond 
  W83697 superio to 48Mhz, used by the WinNET P680

Signed-off-by: Alex Mauer <hawke@hawkesnest.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Alex Mauer 2008-10-16 17:45:25 +00:00
parent ca11e7c259
commit b1b071fe17
9 changed files with 617 additions and 0 deletions

View File

@ -0,0 +1,147 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 VIA Technologies, Inc.
## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
if USE_FALLBACK_IMAGE
default ROM_SECTION_SIZE = FALLBACK_SIZE
default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE)
else
default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
default ROM_SECTION_OFFSET = 0
end
default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
default XIP_ROM_SIZE = 64 * 1024
default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
arch i386 end
driver mainboard.o
if HAVE_PIRQ_TABLE object irq_tables.o end
if HAVE_MP_TABLE object mptable.o end
if HAVE_ACPI_TABLES
object fadt.o
object dsdt.o
object acpi_tables.o
end
makerule ./failover.E
depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
mainboardinit arch/i386/lib/cpu_reset.inc
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit cpu/x86/mmx/enable_mmx.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/mmx/disable_mmx.inc
dir /pc80
config chip.h
chip northbridge/via/cn700 # Northbridge
device pci_domain 0 on # PCI domain
device pci 0.0 on end # AGP Bridge
device pci 0.1 on end # Error Reporting
device pci 0.2 on end # Host Bus Control
device pci 0.3 on end # Memory Controller
device pci 0.4 on end # Power Management
device pci 0.7 on end # V-Link Controller
device pci 1.0 on end # PCI Bridge
chip southbridge/via/vt8237r # Southbridge
# Enable both IDE channels.
register "ide0_enable" = "1"
register "ide1_enable" = "1"
# Both cables are 40pin.
register "ide0_80pin_cable" = "0"
register "ide1_80pin_cable" = "0"
register "fn_ctrl_lo" = "0x80"
register "fn_ctrl_hi" = "0x1d"
device pci f.0 on end # IDE
device pci 10.0 on end # UHCI
device pci 10.1 on end # UHCI
device pci 10.2 on end # UHCI
device pci 10.3 on end # UHCI
device pci 10.4 on end # EHCI
device pci 11.0 on # Southbridge LPC
chip superio/winbond/w83697hf # Super I/O
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 on # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
drq 0x74 = 3
end
device pnp 2e.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 on # COM2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.6 off end # Consumer IR
device pnp 2e.7 off end # Game port, GPIO 1
device pnp 2e.8 off end # MIDI port, GPIO 5
device pnp 2e.9 off end # GPIO 2-4
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HWM
io 0x60 = 0x290
end
end
end
device pci 11.5 on end # AC'97 audio
device pci 12.0 on end # Ethernet
end
end
device apic_cluster 0 on # APIC cluster
chip cpu/via/model_c7 # VIA C7
device apic 0 on end # APIC
end
end
end

View File

@ -0,0 +1,107 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 VIA Technologies, Inc.
## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses HAVE_OPTION_TABLE
uses USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses IRQ_SLOT_COUNT
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses ARCH
uses FALLBACK_SIZE
uses STACK_SIZE
uses HEAP_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD_START
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses PAYLOAD_SIZE
uses _ROMBASE
uses _RAMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses HAVE_MP_TABLE
uses HAVE_ACPI_TABLES
uses CROSS_COMPILE
uses CC
uses HOSTCC
uses OBJCOPY
uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_CHIP_NAME
uses CONFIG_VIDEO_MB
uses CONFIG_IOAPIC
default ROM_SIZE = 512 * 1024
default CONFIG_IOAPIC = 0
default CONFIG_VIDEO_MB = 32
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_PCI_ROM_RUN = 0
default CONFIG_CONSOLE_VGA = 0
default CONFIG_CHIP_NAME = 1
default HAVE_FALLBACK_BOOT = 1
default HAVE_MP_TABLE = 0
default CONFIG_UDELAY_TSC = 1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
default HAVE_HARD_RESET = 0
default HAVE_PIRQ_TABLE = 1
default IRQ_SLOT_COUNT = 10
default HAVE_ACPI_TABLES = 0
default HAVE_OPTION_TABLE = 1
default ROM_IMAGE_SIZE = 64 * 1024
default FALLBACK_SIZE = ROM_SIZE
default USE_FALLBACK_IMAGE = 1
default STACK_SIZE = 8 * 1024
default HEAP_SIZE = 16 * 1024
#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
default USE_OPTION_TABLE = 0
default _RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
default CROSS_COMPILE = ""
default CC = "$(CROSS_COMPILE)gcc -m32 -fno-stack-protector"
default HOSTCC = "gcc"
##
## Set this to the max PCI bus number you would ever use for PCI config I/O.
## Setting this number very high will make pci_locate_device() take a long
## time when it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 3
end

View File

@ -0,0 +1,127 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 VIA Technologies, Inc.
* (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "northbridge/via/cn700/raminit.h"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#include "pc80/udelay_io.c"
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "southbridge/via/vt8237r/vt8237r_early_smbus.c"
#include "superio/winbond/w83697hf/w83697hf_early_serial.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1)
static void memreset_setup(void)
{
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/via/cn700/raminit.c"
static void enable_mainboard_devices(void)
{
device_t dev;
u8 reg;
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
if (dev == PCI_DEV_INVALID)
die("Southbridge not found!!!\n");
/* bit=0 means enable function (per CX700 datasheet)
* 5 16.1 USB 2
* 4 16.0 USB 1
* 3 15.0 SATA and PATA
* 2 16.2 USB 3
* 1 16.4 USB EHCI
*/
pci_write_config8(dev, 0x50, 0x80);
/* bit=1 means enable internal function (per CX700 datasheet)
* 3 Internal RTC
* 2 Internal PS2 Mouse
* 1 Internal KBC Configuration
* 0 Internal Keyboard Controller
*/
pci_write_config8(dev, 0x51, 0x1d);
}
static const struct mem_controller ctrl = {
.d0f0 = 0x0000,
.d0f2 = 0x2000,
.d0f3 = 0x3000,
.d0f4 = 0x4000,
.d0f7 = 0x7000,
.d1f0 = 0x8000,
.channel0 = { 0x50 },
};
static void main(unsigned long bist)
{
unsigned long x;
device_t dev;
/* Enable multifunction for northbridge. */
pci_write_config8(ctrl.d0f0, 0x4f, 0x01);
w83697hf_set_clksel_48(SERIAL_DEV);
w83697hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
print_spew("In auto.c:main()\r\n");
enable_smbus();
smbus_fixup(&ctrl);
if (bist == 0) {
print_debug("doing early_mtrr\r\n");
early_mtrr_init();
}
/* Halt if there was a built-in self test failure. */
report_bist_failure(bist);
print_debug("Enabling mainboard devices\r\n");
enable_mainboard_devices();
ddr_ram_setup(&ctrl);
/* ram_check(0, 640 * 1024); */
print_spew("Leaving auto.c:main()\r\n");
}

View File

@ -0,0 +1,26 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 VIA Technologies, Inc.
* (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
extern struct chip_operations mainboard_bcom_winnetp680_ops;
struct mainboard_bcom_winnetp680_config {
int nothing;
};

View File

@ -0,0 +1,74 @@
entries
#start-bit length config config-ID name
#0 8 r 0 seconds
#8 8 r 0 alarm_seconds
#16 8 r 0 minutes
#24 8 r 0 alarm_minutes
#32 8 r 0 hours
#40 8 r 0 alarm_hours
#48 8 r 0 day_of_week
#56 8 r 0 day_of_month
#64 8 r 0 month
#72 8 r 0 year
#80 4 r 0 rate_select
#84 3 r 0 REF_Clock
#87 1 r 0 UIP
#88 1 r 0 auto_switch_DST
#89 1 r 0 24_hour_mode
#90 1 r 0 binary_values_enable
#91 1 r 0 square-wave_out_enable
#92 1 r 0 update_finished_enable
#93 1 r 0 alarm_interrupt_enable
#94 1 r 0 periodic_interrupt_enable
#95 1 r 0 disable_clock_updates
#96 288 r 0 temporary_filler
0 384 r 0 reserved_memory
384 1 e 4 boot_option
385 1 e 4 last_boot
386 1 e 1 ECC_memory
388 4 r 0 reboot_bits
392 3 e 5 baud_rate
400 1 e 1 power_on_after_fail
412 4 e 6 debug_level
416 4 e 7 boot_first
420 4 e 7 boot_second
424 4 e 7 boot_third
428 4 h 0 boot_index
432 8 h 0 boot_countdown
1008 16 h 0 check_sum
enumerations
#ID value text
1 0 Disable
1 1 Enable
2 0 Enable
2 1 Disable
4 0 Fallback
4 1 Normal
5 0 115200
5 1 57600
5 2 38400
5 3 19200
5 4 9600
5 5 4800
5 6 2400
5 7 1200
6 6 Notice
6 7 Info
6 8 Debug
6 9 Spew
7 0 Network
7 1 HDD
7 2 Floppy
7 8 Fallback_Network
7 9 Fallback_HDD
7 10 Fallback_Floppy
#7 3 ROM
checksums
checksum 392 1007 1008

View File

@ -0,0 +1,54 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 VIA Technologies, Inc.
* (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/pirq_routing.h>
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE,
PIRQ_VERSION,
32 + 16 * IRQ_SLOT_COUNT,/* Max. number of devices on the bus */
0x00, /* Interrupt router bus */
(0x11 << 3) | 0x0, /* Interrupt router device */
0x828, /* IRQs devoted exclusively to PCI usage */
0x1106, /* Vendor */
0x596, /* Device */
0, /* Crap (miniport) */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0x3e, /* Checksum */
{
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
{0x00,(0x08<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x1, 0x0},
{0x00,(0x09<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0x0def8}}, 0x2, 0x0},
{0x00,(0x0a<<3)|0x0, {{0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x3, 0x0},
{0x00,(0x0b<<3)|0x0, {{0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0x0def8}}, 0x4, 0x0},
{0x00,(0x0c<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x5, 0x0},
{0x00,(0x11<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0},
{0x00,(0x0f<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0},
{0x00,(0x01<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0},
{0x00,(0x10<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0},
{0x00,(0x12<<3)|0x0, {{0x01, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0},
}
};
unsigned long write_pirq_routing_table(unsigned long addr)
{
return copy_pirq_routing_table(addr);
}

View File

@ -0,0 +1,27 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 VIA Technologies, Inc.
* (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <device/device.h>
#include "chip.h"
struct chip_operations mainboard_bcom_winnetp680_ops = {
CHIP_NAME("BCOM WinNET P680 Mainboard")
};

View File

@ -35,6 +35,16 @@ static void pnp_exit_ext_func_mode(device_t dev)
outb(0xaa, port);
}
static void w83697hf_set_clksel_48(device_t dev)
{
u16 port = dev >> 8;
pnp_enter_ext_func_mode(dev);
outb(0x24, port);
/* Set the clock input to 48Mhz */
outb(inb(port+1)|0x40, port+1);
pnp_exit_ext_func_mode(dev);
}
static void w83697hf_enable_serial(device_t dev, u16 iobase)
{
pnp_enter_ext_func_mode(dev);

View File

@ -0,0 +1,45 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 VIA Technologies, Inc.
## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
target bcom-winnet-p680
mainboard bcom/winnetp680
option MAXIMUM_CONSOLE_LOGLEVEL=8
option DEFAULT_CONSOLE_LOGLEVEL=8
option CONFIG_CONSOLE_SERIAL8250=1
# coreboot C code runs at this location in RAM
option _RAMBASE=0x00004000
#
# If space is allotted for a VGA BIOS,
# generate the final ROM like this:
# cat vgabios bochsbios coreboot.rom > coreboot.rom.final
#
#option ROM_SIZE = (512 * 1024) - (63 * 1024) - (64 * 1024)
option ROM_SIZE = (512 * 1024)
romimage "image"
option COREBOOT_EXTRA_VERSION = "-winnetp680"
payload ../payload.elf
end
buildrom ./coreboot.rom ROM_SIZE "image"