GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/brya/var/brask: Set PL and PsysPL 

1. Set the PL1, PL2 and PL4 according to issue b:193864533 comment#55
   and Intel's doc #626774.
2. Set PsysPL2 and PsysPmax according to the conclusion in issue
   b:193864533 comment#23 and comment#29.

BUG=b:193864533
BRANCH=none
TEST=Compare the measured power from adapter with the value of 'psys'
     from the command 'dump_intel_rapl_consumption'.

Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I9261902b8c892d0b866f326b24988039c1d30b56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Alan Huang 2021-11-23 18:15:43 +08:00 committed by Tim Wawrzynczak
parent b974dd96b6
commit b1da051f17
2 changed files with 63 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
src/mainboard/google/brya/variants/brask/Makefile.inc
View File

@ -4,3 +4,4 @@ bootblock-y += gpio.c
romstage-y += gpio.c
ramstage-y += gpio.c
ramstage-y += ramstage.c

62
src/mainboard/google/brya/variants/brask/ramstage.c Normal file
View File

@ -0,0 +1,62 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <baseboard/variants.h>
#include <chip.h>
#include <device/device.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <ec/google/chromeec/ec.h>
#include <intelblocks/power_limit.h>
const struct cpu_power_limits limits[] = {
/* SKU_ID, TDP (Watts), pl1_min, pl1_max, pl2_min, pl2_max, pl4 */
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_7, 15, 15000, 15000, 55000, 55000, 123000 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_6, 15, 15000, 15000, 55000, 55000, 123000 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_5, 28, 28000, 28000, 64000, 64000, 90000 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_3, 28, 28000, 28000, 64000, 64000, 140000 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_3, 45, 45000, 45000, 115000, 115000, 215000 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_1, 45, 45000, 45000, 95000, 95000, 125000 },
};
const struct system_power_limits sys_limits[] = {
/* SKU_ID, TDP (Watts), psys_pl2 (Watts) */
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_7, 15, 135 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_6, 15, 135 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_5, 28, 230 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_3, 28, 230 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_3, 45, 230 },
{ PCI_DEVICE_ID_INTEL_ADL_P_ID_1, 45, 230 },
};
/*
* Psys_pmax considerations.
*
* Given the hardware design in brask, the serial shunt resistor is 0.005ohm.
* The full scale of hardware PSYS signal 1.6v maps to system current 13.52A
* instead of real system power. The equation is shown below:
* PSYS = 1.6v = (0.005ohm x 13.52A) x 50 (INA213, gain 50V/V) x R501/(R501 + R510)
* R501/(R501 + R510) = 0.47 = 15K / (15K + 16.9K)
*
* The Psys_pmax is a SW setting which tells IMVP9.1 the mapping b/w system input
* current and the actual system power. Since there is no voltage information
* from PSYS, different voltage input would map to different Psys_pmax settings:
* For Type-C 15V, the Psys_pmax should be 15v x 13.52A = 202.8W
* For Type-C 20V, the Psys_pmax should be 20v x 13.52A = 270.4W
* For a barrel jack, the Psys_pmax should be 19.5v x 13.52A = 263.6W
*
* Imagine that there is a type-c 100W (20V/5A) connected to DUT w/ full loading,
* and the Psys_pmax setting is 270.4W. Then IMVP9.1 can calculate the current system
* power = 270.4W * 5A / 13.52A = 100W, which is the actual system power.
*/
const struct psys_config psys_config = {
.efficiency = 97,
.psys_imax_ma = 13520,
.bj_volts_mv = 19500
};
void variant_devtree_update(void)
{
size_t total_entries = ARRAY_SIZE(limits);
variant_update_psys_power_limits(limits, sys_limits, total_entries, &psys_config);
variant_update_power_limits(limits, total_entries);
}