cpu/qemu-x86: Add x86_64 bootblock support
Add support for x86_64 bootblock on qemu. Introduce a new approach to long mode support. The previous patch set generated page tables at runtime and placed them in heap. The new approach places the page tables in memory mapped ROM. Introduce a new tool called pgtblgen that creates x86 long mode compatible page tables and writes those to a file. The file is included into the CBFS and placed at a predefined offset. Add assembly code to load the page tables, based on a Kconfig symbol and enter long in bootblock. The code can be easily ported to real hardware bootblock. Tested on qemu q35. Change-Id: Iec92c6cea464c97c18a0811e2e91bc22133ace42 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit is contained in:
Patrick Rudolph
Patrick Georgi
parent
6f7c955464
commit
b1ef725f39
|
|
@ -16,24 +16,36 @@ In order to add support for x86_64 the following assumptions are made:
|
|||
* The reference implementation is qemu
|
||||
* The CPU supports 1GiB hugepages
|
||||
|
||||
## Assuptions for ARCH_ROMSTAGE_X86_64 reference implementation
|
||||
* 0-4GiB are identity mapped using 1GiB huge-pages
|
||||
## Assuptions for all stages using the reference implementation
|
||||
* 0-4GiB are identity mapped using 2MiB-pages as WB
|
||||
* Memory above 4GiB isn't accessible
|
||||
* pagetables reside in _pagetables
|
||||
* Romstage must install new pagetables in CBMEM after RAMINIT
|
||||
* page tables reside in memory mapped ROM
|
||||
* A stage can install new page tables in RAM
|
||||
|
||||
## Assuptions for ARCH_RAMSTAGE_X86_64 reference implementation
|
||||
* Romstage installed pagetables according to memory layout
|
||||
* Memory above 4GiB is accessible
|
||||
## Page tables
|
||||
Page tables are generated by a tool in `util/pgtblgen/pgtblgen`. It writes
|
||||
the page tables to a file which is then included into the CBFS as file called
|
||||
`pagetables`.
|
||||
|
||||
To generate the static page tables it must know the physical address where to
|
||||
place the file.
|
||||
|
||||
The page tables contains the following structure:
|
||||
* PML4E pointing to PDPE
|
||||
* PDPE with *$n* entries each pointing to PDE
|
||||
* *$n* PDEs with 512 entries each
|
||||
|
||||
At the moment *$n* is 4, which results in identity mapping the lower 4 GiB.
|
||||
|
||||
## Steps to add basic support for x86_64
|
||||
* Add x86_64 toolchain support - *DONE*
|
||||
* Fix compilation errors - *DONE*
|
||||
* Fix linker errors - *TODO*
|
||||
* Add x86_64 rmodule support - *ONGERRIT*
|
||||
* Add x86_64 rmodule support - *DONE*
|
||||
* Add x86_64 exception handlers - *TODO*
|
||||
* Setup page tables for long mode - *TODO*
|
||||
* Add assembly code for long mode - *TODO*
|
||||
* Setup page tables for long mode - *DONE*
|
||||
* Add assembly code for long mode - *DONE*
|
||||
* Add assembly code for postcar stage - *TODO*
|
||||
* Add assembly code to return to protected mode - *TODO*
|
||||
* Implement reference code for mainboard `emulation/qemu-q35` - *TODO*
|
||||
|
||||
|
|
|
|||
|
|
@ -93,7 +93,7 @@ subdirs-y += $(wildcard src/soc/*/*) $(wildcard src/northbridge/*/*)
|
|||
subdirs-y += src/superio
|
||||
subdirs-y += $(wildcard src/drivers/*) $(wildcard src/drivers/*/*)
|
||||
subdirs-y += src/cpu src/vendorcode
|
||||
subdirs-y += util/cbfstool util/sconfig util/nvramtool
|
||||
subdirs-y += util/cbfstool util/sconfig util/nvramtool util/pgtblgen
|
||||
subdirs-y += util/futility util/marvell util/bincfg
|
||||
subdirs-y += $(wildcard src/arch/*)
|
||||
subdirs-y += src/mainboard/$(MAINBOARDDIR)
|
||||
|
|
|
|||
|
|
@ -66,6 +66,14 @@ config ARCH_RAMSTAGE_X86_64
|
|||
bool
|
||||
default n
|
||||
|
||||
config ARCH_X86_64_PGTBL_LOC
|
||||
hex "x86_64 page table location in CBFS"
|
||||
depends on ARCH_BOOTBLOCK_X86_64
|
||||
default 0xfffea000
|
||||
help
|
||||
The position where to place pagetables. Needs to be known at
|
||||
compile time. Must not overlap other files in CBFS.
|
||||
|
||||
config USE_MARCH_586
|
||||
def_bool n
|
||||
help
|
||||
|
|
|
|||
|
|
@ -31,6 +31,12 @@
|
|||
#include <cpu/x86/16bit/reset16.inc>
|
||||
#include <cpu/x86/32bit/entry32.inc>
|
||||
|
||||
/* BIST result in eax */
|
||||
mov %eax, %ebx
|
||||
/* entry64.inc preserves ebx. */
|
||||
#include <cpu/x86/64bit/entry64.inc>
|
||||
mov %ebx, %eax
|
||||
|
||||
#if CONFIG(BOOTBLOCK_DEBUG_SPINLOOP)
|
||||
|
||||
/* Wait for a JTAG debugger to break in and set EBX non-zero */
|
||||
|
|
|
|||
|
|
@ -38,9 +38,17 @@ cache_as_ram:
|
|||
|
||||
/* Align the stack and keep aligned for call to bootblock_c_entry() */
|
||||
and $0xfffffff0, %esp
|
||||
sub $4, %esp
|
||||
|
||||
/* Restore the BIST result and timestamps. */
|
||||
#if defined(__x86_64__)
|
||||
movd %mm1, %rdi
|
||||
shld %rdi, 32
|
||||
movd %mm1, %rsi
|
||||
or %rsi, %rdi
|
||||
movd %mm2, %rsi
|
||||
#else
|
||||
sub $4, %esp
|
||||
|
||||
movd %mm0, %ebx
|
||||
movd %mm1, %eax
|
||||
movd %mm2, %edx
|
||||
|
|
@ -48,6 +56,7 @@ cache_as_ram:
|
|||
pushl %ebx
|
||||
pushl %edx
|
||||
pushl %eax
|
||||
#endif
|
||||
|
||||
before_c_entry:
|
||||
post_code(0x29)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,62 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (c) 2019 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/*
|
||||
* For starting coreboot in long mode.
|
||||
*
|
||||
* For reference see "AMD64 ArchitectureProgrammer's Manual Volume 2",
|
||||
* Document 24593-Rev. 3.31-July 2019 Chapter 5.3
|
||||
*
|
||||
* Clobbers: eax, ecx, edx
|
||||
*/
|
||||
|
||||
#if defined(__x86_64__)
|
||||
.code32
|
||||
#if (CONFIG_ARCH_X86_64_PGTBL_LOC & 0xfff) > 0
|
||||
#error pagetables must be 4KiB aligned!
|
||||
#endif
|
||||
|
||||
#include <cpu/x86/msr.h>
|
||||
#include <arch/rom_segs.h>
|
||||
|
||||
setup_longmode:
|
||||
/* Get page table address */
|
||||
movl $(CONFIG_ARCH_X86_64_PGTBL_LOC), %eax
|
||||
|
||||
/* load identity mapped page tables */
|
||||
movl %eax, %cr3
|
||||
|
||||
/* enable PAE */
|
||||
movl %cr4, %eax
|
||||
btsl $5, %eax
|
||||
movl %eax, %cr4
|
||||
|
||||
/* enable long mode */
|
||||
movl $(IA32_EFER), %ecx
|
||||
rdmsr
|
||||
btsl $8, %eax
|
||||
wrmsr
|
||||
|
||||
/* enable paging */
|
||||
movl %cr0, %eax
|
||||
btsl $31, %eax
|
||||
movl %eax, %cr0
|
||||
|
||||
/* use long jump to switch to 64-bit code segment */
|
||||
ljmp $ROM_CODE_SEG64, $__longmode_start
|
||||
.code64
|
||||
__longmode_start:
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
ifeq ($(CONFIG_ARCH_BOOTBLOCK_X86_64),y)
|
||||
|
||||
PGTBLGEN:= $(obj)/pgtblgen
|
||||
|
||||
cbfs-files-y += pagetables
|
||||
pagetables-file := $(obj)/mainboard/$(MAINBOARDDIR)/pagetables
|
||||
pagetables-type := raw
|
||||
pagetables-compression := none
|
||||
pagetables-COREBOOT-position := $(CONFIG_ARCH_X86_64_PGTBL_LOC)
|
||||
|
||||
$(obj)/mainboard/$(MAINBOARDDIR)/pagetables: $(PGTBLGEN) $(obj)/config.h
|
||||
printf " TOOL Creating page tables\n"
|
||||
$(PGTBLGEN) -b $(CONFIG_ARCH_X86_64_PGTBL_LOC) -a x86_64 -o $@
|
||||
|
||||
$(PGTBLGEN): util/pgtblgen/pgtblgen.c
|
||||
printf " MAKE Creating PGTBLGEN tool\n"
|
||||
$(HOSTCC) $< -I$(obj) -o $@
|
||||
|
||||
endif
|
||||
|
|
@ -0,0 +1 @@
|
|||
Generates page tables based on fixed physical address. `C`
|
||||
|
|
@ -0,0 +1,168 @@
|
|||
/*
|
||||
* This file is part of pgtblgen.
|
||||
*
|
||||
* Copyright (c) 2019 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <unistd.h>
|
||||
#include <string.h>
|
||||
#include <sys/types.h>
|
||||
#include <sys/stat.h>
|
||||
#include <fcntl.h>
|
||||
#include <errno.h>
|
||||
#include <inttypes.h>
|
||||
|
||||
static void usage(char *argv[])
|
||||
{
|
||||
printf("usage: %s -b <addr> -a <arch> -o <file>\n", argv[0]);
|
||||
printf(" -a\t architecure. Supported: x86_64\n");
|
||||
printf(" -b\t base address\n");
|
||||
printf(" -b\t the file to write to\n");
|
||||
printf(" -h\t show this help text\n");
|
||||
}
|
||||
|
||||
/*
|
||||
* For reference see "AMD64 ArchitectureProgrammer's Manual Volume 2",
|
||||
* Document 24593-Rev. 3.31-July 2019 Chapter 5.3.4
|
||||
*
|
||||
* Page table attributes: WB, User+Supervisor, Present, Writeable
|
||||
*/
|
||||
#define PRES (1ULL << 0)
|
||||
#define RW (1ULL << 1)
|
||||
#define US (1ULL << 2)
|
||||
#define PS (1ULL << 7)
|
||||
#define _GEN_DIR(a) (PRES | RW | US | (a))
|
||||
#define _GEN_PAGE(a) (PRES | RW | US | PS | (a))
|
||||
|
||||
/*
|
||||
* Generate x86_64 page tables.
|
||||
* The page tables needs to be placed at @base_address, and identity map
|
||||
* the first @size_gib GiB of physical memory.
|
||||
*/
|
||||
static int gen_pgtbl_x86_64(const uint64_t base_address,
|
||||
const size_t size_gib,
|
||||
void **out_buf,
|
||||
size_t *out_size)
|
||||
{
|
||||
uint64_t *entry;
|
||||
|
||||
if (!out_size || !out_buf)
|
||||
return 1;
|
||||
|
||||
*out_size = (size_gib + 2) * 4096;
|
||||
*out_buf = malloc(*out_size);
|
||||
if (!*out_buf)
|
||||
return 1;
|
||||
|
||||
memset(*out_buf, 0, *out_size);
|
||||
entry = (uint64_t *)*out_buf;
|
||||
|
||||
/* Generate one PM4LE entry - point to PDPE */
|
||||
entry[0] = _GEN_DIR(base_address + 4096);
|
||||
entry += 512;
|
||||
|
||||
/* PDPE table - point to PDE */
|
||||
for (size_t i = 0; i < size_gib; i++)
|
||||
entry[i] = _GEN_DIR(base_address + 4096 * (i + 2));
|
||||
entry += 512;
|
||||
|
||||
/* PDE tables - identity map 2MiB pages */
|
||||
for (size_t g = 0; g < size_gib; g++) {
|
||||
for (size_t i = 0; i < 512; i++) {
|
||||
uint64_t addr = ((1ULL << (12 + 9)) * i) | ((1ULL << (12 + 9 + 9)) * g);
|
||||
entry[i] = _GEN_PAGE(addr);
|
||||
}
|
||||
entry += 512;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int main(int argc, char *argv[])
|
||||
{
|
||||
int ret = 1;
|
||||
uint64_t base_address = 0;
|
||||
char *filename = NULL;
|
||||
char *arch = NULL;
|
||||
void *buf = NULL;
|
||||
size_t buf_size = 0;
|
||||
int c;
|
||||
|
||||
while ((c = getopt(argc, argv, "ho:a:b:")) != -1)
|
||||
switch (c) {
|
||||
case '?': /* falltrough */
|
||||
case 'h':
|
||||
usage(argv);
|
||||
return 0;
|
||||
case 'o':
|
||||
filename = optarg;
|
||||
break;
|
||||
case 'a':
|
||||
arch = optarg;
|
||||
break;
|
||||
case 'b':
|
||||
base_address = strtoull(optarg, NULL, 0);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
if (!filename) {
|
||||
fprintf(stderr, "E: Missing filename.\n");
|
||||
goto done;
|
||||
}
|
||||
if (!arch) {
|
||||
fprintf(stderr, "E: Missing architecture.\n");
|
||||
goto done;
|
||||
} else if (strcmp(arch, "x86_64") != 0) {
|
||||
fprintf(stderr, "E: Unsupported architecture.\n");
|
||||
goto done;
|
||||
}
|
||||
if (base_address & 4095) {
|
||||
fprintf(stderr, "E: Base address not 4 KiB aligned\n");
|
||||
goto done;
|
||||
}
|
||||
|
||||
/* FIXME: Identity map 4GiB for now, increase if necessary */
|
||||
if (strcmp(arch, "x86_64") == 0)
|
||||
ret = gen_pgtbl_x86_64(base_address, 4, &buf, &buf_size);
|
||||
|
||||
if (ret) {
|
||||
fprintf(stderr, "Failed to generate page tables\n");
|
||||
goto done;
|
||||
}
|
||||
|
||||
// write the table
|
||||
FILE *fd = fopen(filename, "wb");
|
||||
if (!fd) {
|
||||
fprintf(stderr, "%s open failed: %s\n", filename, strerror(errno));
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (fwrite(buf, 1, buf_size, fd) != buf_size) {
|
||||
fprintf(stderr, "%s write failed: %s\n", filename, strerror(errno));
|
||||
fclose(fd);
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (fclose(fd)) {
|
||||
fprintf(stderr, "%s close failed: %s\n", filename, strerror(errno));
|
||||
goto done;
|
||||
}
|
||||
|
||||
ret = 0;
|
||||
done:
|
||||
free(buf);
|
||||
return ret;
|
||||
}
|
||||
Loading…
Reference in New Issue