soc/intel/alderlake: Hook up common code for thermal configuration

Thermal configuration registers are now located behind PMC PWRMBASE
for Alder Lake Point PCH. Hence, ADL SoC to select
SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC to let thermal low threshold
is being set as per mainboard provided `pch_thermal_trip`.

Note: These thermal configuration registers are RW/O hence, setting
those early prior to FSP-S helps coreboot to set the desired low
thermal threshold for the platform.

BUG=b:193774296
TEST=Dump thermal configuration registers PWRMBASE+0x150c etc. prior
to FSP-S shows that registers are now programmed based on
'pch_thermal_trip' and lock register BIT31 is set.

Change-Id: I0f972f47845c123f4f74fd75091c9703d54db796
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59271
Reviewed-by:  Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Subrata Banik 2021-11-17 15:35:05 +05:30
parent 8c45f236bc
commit b2e8bd8364
2 changed files with 12 additions and 0 deletions

View File

@ -68,6 +68,7 @@ config CPU_SPECIFIC_OPTIONS
select SOC_INTEL_COMMON_BLOCK_SMM
select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
select SOC_INTEL_COMMON_BLOCK_TCSS
select SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC
select SOC_INTEL_COMMON_BLOCK_USB4
select SOC_INTEL_COMMON_BLOCK_USB4_PCIE
select SOC_INTEL_COMMON_BLOCK_USB4_XHCI

View File

@ -8,6 +8,7 @@
#include <intelblocks/cse.h>
#include <intelblocks/pmclib.h>
#include <intelblocks/smbus.h>
#include <intelblocks/thermal.h>
#include <memory_info.h>
#include <soc/intel/common/smbios.h>
#include <soc/iomap.h>
@ -127,6 +128,16 @@ void mainboard_romstage_entry(void)
heci_init(HECI1_BASE_ADDRESS);
s3wake = pmc_fill_power_state(ps) == ACPI_S3;
/*
* Set low maximum temp threshold value used for dynamic thermal sensor
* shutdown consideration.
*
* If Dynamic Thermal Shutdown is enabled then PMC logic shuts down the
* thermal sensor when CPU is in a C-state and LTT >= DTS Temp.
*/
pch_thermal_configuration();
fsp_memory_init(s3wake);
pmc_set_disb();
if (!s3wake) {