soc/intel/alderlake: Hook up common code for thermal configuration
Thermal configuration registers are now located behind PMC PWRMBASE for Alder Lake Point PCH. Hence, ADL SoC to select SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC to let thermal low threshold is being set as per mainboard provided `pch_thermal_trip`. Note: These thermal configuration registers are RW/O hence, setting those early prior to FSP-S helps coreboot to set the desired low thermal threshold for the platform. BUG=b:193774296 TEST=Dump thermal configuration registers PWRMBASE+0x150c etc. prior to FSP-S shows that registers are now programmed based on 'pch_thermal_trip' and lock register BIT31 is set. Change-Id: I0f972f47845c123f4f74fd75091c9703d54db796 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59271 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
8c45f236bc
commit
b2e8bd8364
|
@ -68,6 +68,7 @@ config CPU_SPECIFIC_OPTIONS
|
|||
select SOC_INTEL_COMMON_BLOCK_SMM
|
||||
select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
|
||||
select SOC_INTEL_COMMON_BLOCK_TCSS
|
||||
select SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC
|
||||
select SOC_INTEL_COMMON_BLOCK_USB4
|
||||
select SOC_INTEL_COMMON_BLOCK_USB4_PCIE
|
||||
select SOC_INTEL_COMMON_BLOCK_USB4_XHCI
|
||||
|
|
|
@ -8,6 +8,7 @@
|
|||
#include <intelblocks/cse.h>
|
||||
#include <intelblocks/pmclib.h>
|
||||
#include <intelblocks/smbus.h>
|
||||
#include <intelblocks/thermal.h>
|
||||
#include <memory_info.h>
|
||||
#include <soc/intel/common/smbios.h>
|
||||
#include <soc/iomap.h>
|
||||
|
@ -127,6 +128,16 @@ void mainboard_romstage_entry(void)
|
|||
heci_init(HECI1_BASE_ADDRESS);
|
||||
|
||||
s3wake = pmc_fill_power_state(ps) == ACPI_S3;
|
||||
|
||||
/*
|
||||
* Set low maximum temp threshold value used for dynamic thermal sensor
|
||||
* shutdown consideration.
|
||||
*
|
||||
* If Dynamic Thermal Shutdown is enabled then PMC logic shuts down the
|
||||
* thermal sensor when CPU is in a C-state and LTT >= DTS Temp.
|
||||
*/
|
||||
pch_thermal_configuration();
|
||||
|
||||
fsp_memory_init(s3wake);
|
||||
pmc_set_disb();
|
||||
if (!s3wake) {
|
||||
|
|
Loading…
Reference in New Issue