baytrail: Enable panel and set timings

These need to be set before the kernel will work without
running the VBIOS option rom.

Also necessary is setting the PP_CONTROL register with
the EDP_FORCE_VDD bit.

BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up

Change-Id: I495f818d581d08b80db11785fe28b601ec956b3b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179364
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5000
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
This commit is contained in:
Duncan Laurie 2013-12-09 14:38:57 -08:00 committed by Kyösti Mälkki
parent 7b35706cf3
commit b40e444aee
3 changed files with 116 additions and 0 deletions

View File

@ -45,4 +45,20 @@
#define APERTURE_SIZE_256MB (1 << 1)
#define APERTURE_SIZE_512MB (3 << 1)
#define VLV_DISPLAY_BASE 0x180000
#define PIPEA_REG(reg) (VLV_DISPLAY_BASE + (reg))
#define PIPEB_REG(reg) (VLV_DISPLAY_BASE + 0x100 + (reg))
/* Panel control registers */
#define HOTPLUG_CTRL 0x61110
#define PP_CONTROL 0x61204
#define PP_CONTROL_UNLOCK 0xabcd0000
#define PP_CONTROL_EDP_FORCE_VDD (1 << 3)
#define PP_ON_DELAYS 0x61208
#define PP_OFF_DELAYS 0x6120c
#define PP_DIVISOR 0x61210
#define BACKLIGHT_CTL2 0x61250
#define BACKLIGHT_ENABLE (1 << 31)
#define BACKLIGHT_CTL 0x61254
#endif /* _BAYTRAIL_GFX_H_ */

View File

@ -55,6 +55,31 @@ struct soc_intel_baytrail_config {
/* Native SD Card controller - override controller capabilities. */
uint32_t sdcard_cap_low;
uint32_t sdcard_cap_high;
/*
* Digital Port Hotplug Enable:
* 0x04 = Enabled, 2ms short pulse
* 0x05 = Enabled, 4.5ms short pulse
* 0x06 = Enabled, 6ms short pulse
* 0x07 = Enabled, 100ms short pulse
*/
int gpu_pipea_hotplug;
int gpu_pipea_port_select; /* Port select: 1=DP_B 2=DP_C */
uint16_t gpu_pipea_power_on_delay;
uint16_t gpu_pipea_light_on_delay;
uint16_t gpu_pipea_power_off_delay;
uint16_t gpu_pipea_light_off_delay;
uint16_t gpu_pipea_power_cycle_delay;
uint32_t gpu_pipea_backlight_pwm;
int gpu_pipeb_hotplug;
int gpu_pipeb_port_select; /* Port select: 1=DP_B 2=DP_C */
uint16_t gpu_pipeb_power_on_delay;
uint16_t gpu_pipeb_light_on_delay;
uint16_t gpu_pipeb_power_off_delay;
uint16_t gpu_pipeb_light_off_delay;
uint16_t gpu_pipeb_power_cycle_delay;
uint32_t gpu_pipeb_backlight_pwm;
};
extern struct chip_operations soc_intel_baytrail_ops;

View File

@ -30,6 +30,8 @@
#include <baytrail/pci_devs.h>
#include <baytrail/ramstage.h>
#include "chip.h"
#define GFX_TIMEOUT 100000 /* 100ms */
/*
@ -288,6 +290,77 @@ static void gfx_post_vbios_init(device_t dev)
gfx_run_script(dev, gfx_post_vbios_script);
}
static void gfx_panel_setup(device_t dev)
{
struct soc_intel_baytrail_config *config = dev->chip_info;
struct reg_script gfx_pipea_init[] = {
REG_SCRIPT_SET_DEV(dev),
/* CONTROL */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEA_REG(PP_CONTROL),
PP_CONTROL_UNLOCK | PP_CONTROL_EDP_FORCE_VDD),
/* HOTPLUG */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEA_REG(HOTPLUG_CTRL),
0x1 | (config->gpu_pipea_hotplug << 2)),
/* POWER ON */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEA_REG(PP_ON_DELAYS),
(config->gpu_pipea_port_select << 30 |
config->gpu_pipea_power_on_delay << 16 |
config->gpu_pipea_light_on_delay)),
/* POWER OFF */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEA_REG(PP_OFF_DELAYS),
(config->gpu_pipea_power_off_delay << 16 |
config->gpu_pipea_light_off_delay)),
/* DIVISOR */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, PIPEA_REG(PP_DIVISOR),
~0x1f, config->gpu_pipea_power_cycle_delay),
/* BACKLIGHT */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEA_REG(BACKLIGHT_CTL),
(config->gpu_pipea_backlight_pwm << 16) |
(config->gpu_pipea_backlight_pwm >> 1)),
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEA_REG(BACKLIGHT_CTL2),
BACKLIGHT_ENABLE),
REG_SCRIPT_END
};
struct reg_script gfx_pipeb_init[] = {
REG_SCRIPT_SET_DEV(dev),
/* CONTROL */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEB_REG(PP_CONTROL),
PP_CONTROL_UNLOCK | PP_CONTROL_EDP_FORCE_VDD),
/* HOTPLUG */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEB_REG(HOTPLUG_CTRL),
0x1 | (config->gpu_pipeb_hotplug << 2)),
/* POWER ON */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEB_REG(PP_ON_DELAYS),
(config->gpu_pipeb_port_select << 30 |
config->gpu_pipeb_power_on_delay << 16 |
config->gpu_pipeb_light_on_delay)),
/* POWER OFF */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEB_REG(PP_OFF_DELAYS),
(config->gpu_pipeb_power_off_delay << 16 |
config->gpu_pipeb_light_off_delay)),
/* DIVISOR */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, PIPEB_REG(PP_DIVISOR),
~0x1f, config->gpu_pipeb_power_cycle_delay),
/* BACKLIGHT */
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEB_REG(BACKLIGHT_CTL),
(config->gpu_pipeb_backlight_pwm << 16) |
(config->gpu_pipeb_backlight_pwm >> 1)),
REG_RES_WRITE32(PCI_BASE_ADDRESS_0, PIPEB_REG(BACKLIGHT_CTL2),
BACKLIGHT_ENABLE),
REG_SCRIPT_END
};
if (config->gpu_pipea_port_select) {
printk(BIOS_INFO, "GFX: Initialize PIPEA\n");
reg_script_run(gfx_pipea_init);
}
if (config->gpu_pipeb_port_select) {
printk(BIOS_INFO, "GFX: Initialize PIPEB\n");
reg_script_run(gfx_pipeb_init);
}
}
static void gfx_init(device_t dev)
{
/* Pre VBIOS Init */
@ -296,6 +369,8 @@ static void gfx_init(device_t dev)
/* Power Management Init */
gfx_pm_init(dev);
gfx_panel_setup(dev);
/* Run VBIOS */
pci_dev_init(dev);