diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c
index e2f9c2772f..a95a38354f 100644
--- a/util/superiotool/fintek.c
+++ b/util/superiotool/fintek.c
@@ -102,68 +102,32 @@ void dump_fintek(uint16_t port, uint16_t did)
 	       regval(port, 0xf6), regval(port, 0xf7), regval(port, 0xf8));
 }
 
-static void enter_conf_mode_fintek(uint16_t port)
-{
-	/* Enable configuration sequence (Fintek uses this for example)
-	 * Older ITE chips have the same enable sequence.
-	 */
-	outb(0x87, port);
-	outb(0x87, port);
-}
-
-static void exit_conf_mode_fintek(uint16_t port)
-{
-	/* Exit MB PnP mode (for Fintek, doesn't hurt ITE). */
-	outb(0xaa, port);
-}
-
 void probe_idregs_fintek(uint16_t port)
 {
-	uint16_t vid, did, did_ite, success = 0;
+	uint16_t vid, did;
 
-	enter_conf_mode_fintek(port);
+	enter_conf_mode_winbond_fintek_ite_8787(port);
 
 	did = regval(port, DEVICE_ID_BYTE1_REG);
 	did |= (regval(port, DEVICE_ID_BYTE2_REG) << 8);
-	did_ite = ((did & 0xff) << 8) | ((did & 0xff00) >> 8);
 
 	vid = regval(port, VENDOR_ID_BYTE1_REG);
 	vid |= (regval(port, VENDOR_ID_BYTE2_REG) << 8);
 
-	/* FIXME */
-	if (vid != 0x3419 && did_ite != 0x8708 && did_ite != 0x8710) {
+	if (vid != 0x3419) {
 		no_superio_found(port);
-		exit_conf_mode_fintek(port);
-		return;
-	}
-
-	if (did_ite == 0x8708 || did_ite == 0x8701) {
-		printf("Found ITE IT%04xF (id=0x%04x, rev=0x%01x) at port=0x%x\n", did_ite, did_ite, 0, port); /* FIXME */
-		dump_ite(port, did_ite);
-		regwrite(port, 0x02, 0x02); /* FIXME */
-		return;
-	}
-		
-	if (vid == 0xff || vid == 0xffff) {
-		exit_conf_mode_fintek(port);
+		exit_conf_mode_winbond_fintek_ite_8787(port);
 		return;
 	}
 
         printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at port=0x%x\n",
        	       get_superio_name(reg_table, did), vid, did, port);
 
-	switch (vid) {
-	case 0x3419:
-		success = 1;
-		dump_fintek(port, did);
-		break;
-	default:
-		break;
-	}
+	dump_superio("Fintek", reg_table, port, did);
 
-	if (!success)
-		printf("No dump for vid 0x%04x, did 0x%04x\n", vid, did);
+	/* TODO: Revive this as --dump-human-readable output. */
+	/* dump_fintek(port, did); */
 
-	exit_conf_mode_fintek(port);
+	exit_conf_mode_winbond_fintek_ite_8787(port);
 }
 
diff --git a/util/superiotool/ite.c b/util/superiotool/ite.c
index 610516a980..1a65e2cff2 100644
--- a/util/superiotool/ite.c
+++ b/util/superiotool/ite.c
@@ -226,12 +226,10 @@ static void exit_conf_mode_ite(uint16_t port)
 	regwrite(port, 0x02, 0x02);
 }
 
-void probe_idregs_ite(uint16_t port)
+static void probe_idregs_ite_helper(uint16_t port)
 {
 	uint16_t id, chipver;
 
-	enter_conf_mode_ite(port);
-
 	id = regval(port, CHIP_ID_BYTE1_REG) << 8;
 	id |= regval(port, CHIP_ID_BYTE2_REG);
 	chipver = regval(port, CHIP_VERSION_REG) & 0x0f; /* Only bits 3..0 */
@@ -246,7 +244,16 @@ void probe_idregs_ite(uint16_t port)
 	       get_superio_name(reg_table, id), id, chipver, port);
 
 	dump_superio("ITE", reg_table, port, id);
-
-	exit_conf_mode_ite(port);
+}
+
+void probe_idregs_ite(uint16_t port)
+{
+	enter_conf_mode_ite(port);
+	probe_idregs_ite_helper(port);
+	exit_conf_mode_ite(port);
+
+	enter_conf_mode_winbond_fintek_ite_8787(port);
+	probe_idregs_ite_helper(port);
+	exit_conf_mode_winbond_fintek_ite_8787(port);
 }
 
diff --git a/util/superiotool/superiotool.c b/util/superiotool/superiotool.c
index 8aea0a02d9..0a253ad623 100644
--- a/util/superiotool/superiotool.c
+++ b/util/superiotool/superiotool.c
@@ -37,6 +37,18 @@ void regwrite(uint16_t port, uint8_t reg, uint8_t val)
 	outb(val, port + 1);
 }
 
+void enter_conf_mode_winbond_fintek_ite_8787(uint16_t port)
+{
+	outb(0x87, port);
+	outb(0x87, port);
+}
+
+void exit_conf_mode_winbond_fintek_ite_8787(uint16_t port)
+{
+	outb(0xaa, port);		/* Fintek, Winbond */
+	regwrite(port, 0x02, 0x02);	/* ITE */
+}
+
 int superio_unknown(const struct superio_registers reg_table[], uint16_t id)
 {
 	return !strncmp(get_superio_name(reg_table, id), "<unknown>", 9);
diff --git a/util/superiotool/superiotool.h b/util/superiotool/superiotool.h
index b0d12cd0dd..9b82b4cf9d 100644
--- a/util/superiotool/superiotool.h
+++ b/util/superiotool/superiotool.h
@@ -70,6 +70,8 @@ struct superio_registers {
 /* superiotool.c */
 uint8_t regval(uint16_t port, uint8_t reg);
 void regwrite(uint16_t port, uint8_t reg, uint8_t val);
+void enter_conf_mode_winbond_fintek_ite_8787(uint16_t port);
+void exit_conf_mode_winbond_fintek_ite_8787(uint16_t port);
 int superio_unknown(const struct superio_registers reg_table[], uint16_t id);
 const char *get_superio_name(const struct superio_registers reg_table[],
 			     uint16_t id);
diff --git a/util/superiotool/winbond.c b/util/superiotool/winbond.c
index ca2d1db4bc..0e8f2b86f8 100644
--- a/util/superiotool/winbond.c
+++ b/util/superiotool/winbond.c
@@ -126,23 +126,12 @@ const static struct superio_registers reg_table[] = {
 	{EOT}
 };
 
-static void enter_conf_mode_winbond(uint16_t port)
-{
-	outb(0x87, port);
-	outb(0x87, port);
-}
-
-static void exit_conf_mode_winbond(uint16_t port)
-{
-	outb(0xaa, port);
-}
-
 void probe_idregs_winbond(uint16_t port)
 {
 	uint16_t id;
 	uint8_t devid, rev;
 
-	enter_conf_mode_winbond(port);
+	enter_conf_mode_winbond_fintek_ite_8787(port);
 
 	devid = regval(port, DEVICE_ID_REG);
 	rev = regval(port, DEVICE_REV_REG);
@@ -152,7 +141,7 @@ void probe_idregs_winbond(uint16_t port)
 
 	if (superio_unknown(reg_table, id)) {
 		no_superio_found(port);
-		exit_conf_mode_winbond(port);
+		exit_conf_mode_winbond_fintek_ite_8787(port);
 		return;
 	}
 
@@ -162,6 +151,6 @@ void probe_idregs_winbond(uint16_t port)
 	/* TODO: Special notes in dump output for the MISC entries. */
 	dump_superio("Winbond", reg_table, port, id);
 
-	exit_conf_mode_winbond(port);
+	exit_conf_mode_winbond_fintek_ite_8787(port);
 }