Fix whitespace issue with help message in Kconfig file
Every line of text after a 'help' label in a Kconfig file must have the same whitespace preceding it, otherwise it's no longer considered help text. Change-Id: I97093bee72b295b315d78d4c26d7186bf1017fda Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1687 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
This commit is contained in:
parent
6f05c2eb59
commit
b578627f51
|
@ -95,17 +95,17 @@ config HUDSON_FWM_POSITION
|
||||||
default 0xFF820000 if BOARD_ROMSIZE_KB_8192
|
default 0xFF820000 if BOARD_ROMSIZE_KB_8192
|
||||||
default 0xFF020000 if BOARD_ROMSIZE_KB_16384
|
default 0xFF020000 if BOARD_ROMSIZE_KB_16384
|
||||||
help
|
help
|
||||||
Hudson requires the firmware MUST to be located at
|
Hudson requires the firmware MUST be located at
|
||||||
a specific address (ROM start address + 0x20000), otherwise
|
a specific address (ROM start address + 0x20000), otherwise
|
||||||
xhci host Controller can not find or load the xhci firmware.
|
xhci host Controller can not find or load the xhci firmware.
|
||||||
|
|
||||||
The firmware start address is dependent on the ROM chip size.
|
The firmware start address is dependent on the ROM chip size.
|
||||||
The default offset is 0x20000 from the ROM start address, namely
|
The default offset is 0x20000 from the ROM start address, namely
|
||||||
0xFFF20000 if flash chip size is 1M
|
0xFFF20000 if flash chip size is 1M
|
||||||
0xFFE20000 if flash chip size is 2M
|
0xFFE20000 if flash chip size is 2M
|
||||||
0xFFC20000 if flash chip size is 4M
|
0xFFC20000 if flash chip size is 4M
|
||||||
0xFF820000 if flash chip size is 8M
|
0xFF820000 if flash chip size is 8M
|
||||||
0xFF020000 if flash chip size is 16M
|
0xFF020000 if flash chip size is 16M
|
||||||
endif
|
endif
|
||||||
|
|
||||||
choice
|
choice
|
||||||
|
|
Loading…
Reference in New Issue