ec/lenovo/h8: Add WWAN detection support
* Add support for detecting WWAN. * Allows to turn off power to WWAN if no card is installed. Add the following devicetree values: * has_wwan_detection Set to one to indicate that the following register are sane. * wwan_gpio_num SB GPIO num to read. * wwan_gpio_lvl SB GPIO level for card to be present (usually zero). Don't enable WWAN power if no card is detected. As there are no devicetree values yet, the new code doesn't have any effect. Change-Id: Ie53275b384c85df8adf71fe79b3d54211c868756 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This commit is contained in:
parent
b77eec82f3
commit
b8e325a714
|
@ -7,6 +7,7 @@ endif
|
|||
|
||||
ramstage-y += h8.c
|
||||
ramstage-y += bluetooth.c
|
||||
ramstage-y += wwan.c
|
||||
smm-y += smm.c
|
||||
|
||||
endif
|
||||
|
|
|
@ -47,9 +47,13 @@ struct ec_lenovo_h8_config {
|
|||
u8 has_power_management_beeps;
|
||||
u8 has_uwb;
|
||||
u8 has_bdc_detection;
|
||||
u8 has_wwan_detection;
|
||||
|
||||
u8 bdc_gpio_num;
|
||||
u8 bdc_gpio_lvl;
|
||||
|
||||
u8 wwan_gpio_num;
|
||||
u8 wwan_gpio_lvl;
|
||||
};
|
||||
|
||||
#endif /* EC_LENOVO_H8EC_CHIP_H */
|
||||
|
|
|
@ -44,15 +44,6 @@ void h8_wlan_enable(int on)
|
|||
ec_clr_bit(0x3a, 5);
|
||||
}
|
||||
|
||||
/* Controls radio-off pin in WWAN MiniPCIe slot. */
|
||||
static void h8_wwan_enable(int on)
|
||||
{
|
||||
if (on)
|
||||
ec_set_bit(0x3a, 6);
|
||||
else
|
||||
ec_clr_bit(0x3a, 6);
|
||||
}
|
||||
|
||||
/* Controls radio-off pin in UWB MiniPCIe slot. */
|
||||
static void h8_uwb_enable(int on)
|
||||
{
|
||||
|
@ -283,9 +274,7 @@ static void h8_enable(struct device *dev)
|
|||
val = h8_has_bdc(dev) && h8_bluetooth_nv_enable();
|
||||
h8_bluetooth_enable(val);
|
||||
|
||||
if (get_option(&val, "wwan") != CB_SUCCESS)
|
||||
val = 1;
|
||||
|
||||
val = h8_has_wwan(dev) && h8_wwan_nv_enable();
|
||||
h8_wwan_enable(val);
|
||||
|
||||
if (conf->has_uwb) {
|
||||
|
|
|
@ -35,6 +35,10 @@ void h8_bluetooth_enable(int on);
|
|||
bool h8_bluetooth_nv_enable(void);
|
||||
bool h8_has_bdc(struct device *dev);
|
||||
|
||||
void h8_wwan_enable(int on);
|
||||
bool h8_wwan_nv_enable(void);
|
||||
bool h8_has_wwan(struct device *dev);
|
||||
|
||||
/* EC registers */
|
||||
#define H8_CONFIG0 0x00
|
||||
#define H8_CONFIG0_EVENTS_ENABLE 0x02
|
||||
|
|
|
@ -0,0 +1,67 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2017 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <southbridge/intel/common/gpio.h>
|
||||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <ec/acpi/ec.h>
|
||||
#include <option.h>
|
||||
|
||||
#include "h8.h"
|
||||
#include "chip.h"
|
||||
|
||||
/* Controls radio-off pin in WWAN MiniPCIe slot. */
|
||||
void h8_wwan_enable(int on)
|
||||
{
|
||||
if (on)
|
||||
ec_set_bit(0x3a, 6);
|
||||
else
|
||||
ec_clr_bit(0x3a, 6);
|
||||
}
|
||||
|
||||
/*
|
||||
* Detect WWAN on supported MBs.
|
||||
*/
|
||||
bool h8_has_wwan(struct device *dev)
|
||||
{
|
||||
struct ec_lenovo_h8_config *conf = dev->chip_info;
|
||||
|
||||
if (!conf->has_wwan_detection) {
|
||||
printk(BIOS_INFO, "H8: WWAN detection not implemented. "
|
||||
"Assuming WWAN installed\n");
|
||||
return true;
|
||||
}
|
||||
|
||||
if (get_gpio(conf->wwan_gpio_num) == conf->wwan_gpio_lvl) {
|
||||
printk(BIOS_INFO, "H8: WWAN installed\n");
|
||||
return true;
|
||||
}
|
||||
|
||||
printk(BIOS_INFO, "H8: WWAN not installed\n");
|
||||
return false;
|
||||
}
|
||||
|
||||
/*
|
||||
* Return WWAN NVRAM setting.
|
||||
*/
|
||||
bool h8_wwan_nv_enable(void)
|
||||
{
|
||||
u8 val;
|
||||
|
||||
if (get_option(&val, "wwan") != CB_SUCCESS)
|
||||
return true;
|
||||
|
||||
return val;
|
||||
}
|
Loading…
Reference in New Issue