mb/supermicro/x11ssh-tf: Disable i8042 support

Even though the vendor firmware enables the i8042 I/O port, it doesn't
feed valid data to those, but instead uses USB HID devices.

Disable the KBC port in SuperI/O and report no KCS port using FADT.

Fixes:
* Fixes error message in Linux that i8042 keyboard couldn't be enabled.

Tested on Supermicro X11SSH-TF:
The virtual remote managment console still works.

Change-Id: I1cdf648aa5bf1d0ec48520fa1e45bdaf043cb45d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This commit is contained in:
Patrick Rudolph 2019-10-15 14:52:29 +02:00 committed by Nico Huber
parent 00f0de3e14
commit baa8c7819c
2 changed files with 2 additions and 6 deletions

View File

@ -14,6 +14,7 @@ config BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES
select IPMI_KCS
select MAINBOARD_NO_FSP_GOP
select SUPERIO_ASPEED_HAS_UART_DELAY_WORKAROUND
select NO_FADT_8042
if BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES

View File

@ -114,12 +114,7 @@ chip soc/intel/skylake
io 0x66 = 0xa30
irq 0x70 = 0xb
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 0xc
end
device pnp 2e.5 off end # KBC
device pnp 2e.7 on end # GPIO
device pnp 2e.b on # SUART3
io 0x60 = 0x3e8