From bb95731dadf3aa9807090f9e5f55a870f5d4dd43 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Piotr=20Kr=C3=B3l?= <piotr.krol@3mdeb.com>
Date: Fri, 4 May 2018 15:29:56 +0200
Subject: [PATCH] payloads/external/SeaBIOS: add support for sercon port
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Change-Id: Id2d2ed0fa97f2cef5818a8508bb8ee3ddba73647
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/26060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
---
 Makefile.inc                      |  4 ++++
 payloads/external/SeaBIOS/Kconfig | 18 ++++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/Makefile.inc b/Makefile.inc
index aa93222920..7ce236031e 100644
--- a/Makefile.inc
+++ b/Makefile.inc
@@ -1023,6 +1023,10 @@ ifneq ($(CONFIG_UPDATE_IMAGE),y)
 endif
 endif
 endif
+ifeq ($(CONFIG_SEABIOS_ADD_SERCON_PORT_FILE),y)
+	@printf "    SeaBIOS    Add sercon-port file\n"
+	$(CBFSTOOL) $@.tmp add-int -i $(CONFIG_SEABIOS_SERCON_PORT_ADDR) -n etc/sercon-port
+endif
 ifeq ($(CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE),y)
 ifeq ($(CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER),y)
 	@printf "    UPDATE-FIT\n"
diff --git a/payloads/external/SeaBIOS/Kconfig b/payloads/external/SeaBIOS/Kconfig
index 52dc738a8b..fb9f32b620 100644
--- a/payloads/external/SeaBIOS/Kconfig
+++ b/payloads/external/SeaBIOS/Kconfig
@@ -86,6 +86,24 @@ config SEABIOS_BOOTORDER_FILE
 	  If used, a typical value would be:
 	    $(top)/src/mainboard/$(MAINBOARDDIR)/bootorder
 
+config SEABIOS_ADD_SERCON_PORT_FILE
+	prompt "Add SeaBIOS sercon-port file to CBFS"
+	default n
+	bool
+	help
+	  Select this option to enable SeaBIOS' VGA adapter emulation
+	  on serial port.
+
+config SEABIOS_SERCON_PORT_ADDR
+	hex "SeaBIOS sercon-port base address"
+	depends on SEABIOS_ADD_SERCON_PORT_FILE
+	default TTYS0_BASE
+	help
+	  Set this field to the IO address of a serial port for SeaBIOS' VGA
+	  adapter emulation.
+
+	  By default primary console UART defined by TTYS0_BASE is used.
+
 config PAYLOAD_FILE
 	default "payloads/external/SeaBIOS/seabios/out/bios.bin.elf"