mb/google/nissa/var/craask Add device settings
Add the configuration in device tree: 1. Add speaker codec and speaker amp settings 2. Add Elan touchscreen settings 3. Add WFC and usb settings 4 Add Elan Touchpad settings 5. Add WiFi configuration 6. Add LTE settings BUG=b:229938024 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Iabf7f864082714ef1fecdee984fbebf1f3f0a672 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
This commit is contained in:
Tyler Wang
Felix Held
parent
b5b2fe4946
commit
bd544e8834
|
|
@ -199,6 +199,10 @@ config BOARD_GOOGLE_KINOX
|
||||||
config BOARD_GOOGLE_CRAASK
|
config BOARD_GOOGLE_CRAASK
|
||||||
bool "-> Craask"
|
bool "-> Craask"
|
||||||
select BOARD_GOOGLE_BASEBOARD_NISSA
|
select BOARD_GOOGLE_BASEBOARD_NISSA
|
||||||
|
select DRIVERS_GENERIC_GPIO_KEYS
|
||||||
|
select DRIVERS_GENESYSLOGIC_GL9750
|
||||||
|
select DRIVERS_INTEL_MIPI_CAMERA
|
||||||
|
select HAVE_WWAN_POWER_SEQUENCE
|
||||||
|
|
||||||
config BOARD_GOOGLE_OSIRIS
|
config BOARD_GOOGLE_OSIRIS
|
||||||
bool "-> Osiris"
|
bool "-> Osiris"
|
||||||
|
|
|
||||||
|
|
@ -5,4 +5,8 @@
|
||||||
|
|
||||||
#include <baseboard/gpio.h>
|
#include <baseboard/gpio.h>
|
||||||
|
|
||||||
|
#define WWAN_FCPO GPP_D6
|
||||||
|
#define WWAN_RST GPP_F12
|
||||||
|
#define T2_OFF_MS 20
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,348 @@
|
||||||
|
fw_config
|
||||||
|
field DB_USB 0 1
|
||||||
|
option DB_NONE 0
|
||||||
|
option DB_1C_1A 1
|
||||||
|
option DB_1C_LTE 2
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
chip soc/intel/alderlake
|
chip soc/intel/alderlake
|
||||||
|
register "sagv" = "SaGv_Enabled"
|
||||||
|
|
||||||
|
# SOC Aux orientation override:
|
||||||
|
# This is a bitfield that corresponds to up to 4 TCSS ports.
|
||||||
|
# Bits (0,1) allocated for TCSS Port1 configuration and Bits (2,3)for TCSS Port2.
|
||||||
|
# TcssAuxOri = 0101b
|
||||||
|
# Bit0,Bit2 set to "1" indicates no retimer on USBC Ports
|
||||||
|
# Bit1,Bit3 set to "0" indicates Aux lines are not swapped on the
|
||||||
|
# motherboard to USBC connector
|
||||||
|
register "tcss_aux_ori" = "5"
|
||||||
|
|
||||||
|
register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
|
||||||
|
register "typec_aux_bias_pads[1]" = "{.pad_auxp_dc = GPP_A21, .pad_auxn_dc = GPP_A22}"
|
||||||
|
|
||||||
|
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for CNVi WLAN
|
||||||
|
|
||||||
device domain 0 on
|
device domain 0 on
|
||||||
end
|
device ref ipu on
|
||||||
|
chip drivers/intel/mipi_camera
|
||||||
|
register "acpi_uid" = "0x50000"
|
||||||
|
register "acpi_name" = ""IPU0""
|
||||||
|
register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
|
||||||
|
|
||||||
|
register "cio2_num_ports" = "1"
|
||||||
|
register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
|
||||||
|
register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
|
||||||
|
register "cio2_prt[0]" = "1"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c1 on
|
||||||
|
chip drivers/i2c/hid
|
||||||
|
register "generic.hid" = ""ELAN6915""
|
||||||
|
register "generic.desc" = ""ELAN Touchscreen""
|
||||||
|
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||||
|
register "generic.probed" = "1"
|
||||||
|
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||||
|
register "generic.reset_delay_ms" = "20"
|
||||||
|
register "generic.reset_off_delay_ms" = "2"
|
||||||
|
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
|
||||||
|
register "generic.stop_delay_ms" = "280"
|
||||||
|
register "generic.stop_off_delay_ms" = "2"
|
||||||
|
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||||
|
register "generic.enable_delay_ms" = "1"
|
||||||
|
register "generic.has_power_resource" = "1"
|
||||||
|
register "generic.disable_gpio_export_in_crs" = "1"
|
||||||
|
register "hid_desc_reg_offset" = "0x01"
|
||||||
|
device i2c 15 on end
|
||||||
|
end
|
||||||
|
chip drivers/generic/gpio_keys
|
||||||
|
register "name" = ""PENH""
|
||||||
|
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)"
|
||||||
|
register "key.wake_gpe" = "GPE0_DW2_15"
|
||||||
|
register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
|
||||||
|
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
|
||||||
|
register "key.dev_name" = ""EJCT""
|
||||||
|
register "key.linux_code" = "SW_PEN_INSERTED"
|
||||||
|
register "key.linux_input_type" = "EV_SW"
|
||||||
|
register "key.label" = ""pen_eject""
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c2 on
|
||||||
|
chip drivers/i2c/sx9324
|
||||||
|
register "desc" = ""SAR Proximity Sensor""
|
||||||
|
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
|
||||||
|
register "speed" = "I2C_SPEED_FAST"
|
||||||
|
register "uid" = "1"
|
||||||
|
register "reg_gnrl_ctrl0" = "0x16"
|
||||||
|
register "reg_gnrl_ctrl1" = "0x21"
|
||||||
|
register "reg_afe_ctrl0" = "0x00"
|
||||||
|
register "reg_afe_ctrl1" = "0x10"
|
||||||
|
register "reg_afe_ctrl2" = "0x00"
|
||||||
|
register "reg_afe_ctrl3" = "0x00"
|
||||||
|
register "reg_afe_ctrl4" = "0x07"
|
||||||
|
register "reg_afe_ctrl5" = "0x00"
|
||||||
|
register "reg_afe_ctrl6" = "0x00"
|
||||||
|
register "reg_afe_ctrl7" = "0x07"
|
||||||
|
register "reg_afe_ctrl8" = "0x12"
|
||||||
|
register "reg_afe_ctrl9" = "0x0f"
|
||||||
|
register "reg_prox_ctrl0" = "0x12"
|
||||||
|
register "reg_prox_ctrl1" = "0x12"
|
||||||
|
register "reg_prox_ctrl2" = "0x90"
|
||||||
|
register "reg_prox_ctrl3" = "0x60"
|
||||||
|
register "reg_prox_ctrl4" = "0x0c"
|
||||||
|
register "reg_prox_ctrl5" = "0x12"
|
||||||
|
register "reg_prox_ctrl6" = "0x3c"
|
||||||
|
register "reg_prox_ctrl7" = "0x58"
|
||||||
|
register "reg_adv_ctrl0" = "0x00"
|
||||||
|
register "reg_adv_ctrl1" = "0x00"
|
||||||
|
register "reg_adv_ctrl2" = "0x00"
|
||||||
|
register "reg_adv_ctrl3" = "0x00"
|
||||||
|
register "reg_adv_ctrl4" = "0x00"
|
||||||
|
register "reg_adv_ctrl5" = "0x05"
|
||||||
|
register "reg_adv_ctrl6" = "0x00"
|
||||||
|
register "reg_adv_ctrl7" = "0x00"
|
||||||
|
register "reg_adv_ctrl8" = "0x00"
|
||||||
|
register "reg_adv_ctrl9" = "0x00"
|
||||||
|
register "reg_adv_ctrl10" = "0x5c"
|
||||||
|
register "reg_adv_ctrl11" = "0x52"
|
||||||
|
register "reg_adv_ctrl12" = "0xb5"
|
||||||
|
register "reg_adv_ctrl13" = "0x00"
|
||||||
|
register "reg_adv_ctrl14" = "0x80"
|
||||||
|
register "reg_adv_ctrl15" = "0x0c"
|
||||||
|
register "reg_adv_ctrl16" = "0x38"
|
||||||
|
register "reg_adv_ctrl17" = "0x56"
|
||||||
|
register "reg_adv_ctrl18" = "0x33"
|
||||||
|
register "reg_adv_ctrl19" = "0xf0"
|
||||||
|
register "reg_adv_ctrl20" = "0xf0"
|
||||||
|
device i2c 28 on
|
||||||
|
probe DB_USB DB_1C_LTE
|
||||||
|
end
|
||||||
|
end
|
||||||
|
chip drivers/intel/mipi_camera
|
||||||
|
register "acpi_hid" = ""OVTI5675""
|
||||||
|
register "acpi_uid" = "0"
|
||||||
|
register "acpi_name" = ""CAM0""
|
||||||
|
register "chip_name" = ""Ov 5675 Camera""
|
||||||
|
register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
|
||||||
|
|
||||||
|
register "ssdb.lanes_used" = "2"
|
||||||
|
register "ssdb.link_used" = "1"
|
||||||
|
register "ssdb.vcm_type" = "0x0C"
|
||||||
|
register "vcm_name" = ""VCM0""
|
||||||
|
register "num_freq_entries" = "1"
|
||||||
|
register "link_freq[0]" = "DEFAULT_LINK_FREQ"
|
||||||
|
register "remote_name" = ""IPU0""
|
||||||
|
|
||||||
|
register "has_power_resource" = "1"
|
||||||
|
#Controls
|
||||||
|
register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
|
||||||
|
register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
|
||||||
|
|
||||||
|
register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X
|
||||||
|
register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X
|
||||||
|
register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L
|
||||||
|
|
||||||
|
#_ON
|
||||||
|
register "on_seq.ops_cnt" = "5"
|
||||||
|
register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
|
||||||
|
register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
|
||||||
|
register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
|
||||||
|
register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
|
||||||
|
register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
|
||||||
|
|
||||||
|
#_OFF
|
||||||
|
register "off_seq.ops_cnt" = "4"
|
||||||
|
register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
|
||||||
|
register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
|
||||||
|
register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
|
||||||
|
register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
|
||||||
|
|
||||||
|
device i2c 36 on end
|
||||||
|
end
|
||||||
|
chip drivers/intel/mipi_camera
|
||||||
|
register "acpi_uid" = "3"
|
||||||
|
register "acpi_name" = ""VCM0""
|
||||||
|
register "chip_name" = ""DW AF DAC""
|
||||||
|
register "device_type" = "INTEL_ACPI_CAMERA_VCM"
|
||||||
|
|
||||||
|
register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
|
||||||
|
register "vcm_compat" = ""dongwoon,dw9714""
|
||||||
|
|
||||||
|
device i2c 0C on end
|
||||||
|
end
|
||||||
|
chip drivers/intel/mipi_camera
|
||||||
|
register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
|
||||||
|
register "acpi_uid" = "1"
|
||||||
|
register "acpi_name" = ""NVM0""
|
||||||
|
register "chip_name" = ""GT24C08""
|
||||||
|
register "device_type" = "INTEL_ACPI_CAMERA_NVM"
|
||||||
|
|
||||||
|
register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
|
||||||
|
|
||||||
|
register "nvm_size" = "0x2000"
|
||||||
|
register "nvm_pagesize" = "1"
|
||||||
|
register "nvm_readonly" = "1"
|
||||||
|
register "nvm_width" = "0x10"
|
||||||
|
register "nvm_compat" = ""atmel,24c08""
|
||||||
|
|
||||||
|
device i2c 50 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c3 on
|
||||||
|
chip drivers/i2c/nau8825
|
||||||
|
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)"
|
||||||
|
register "jkdet_enable" = "1"
|
||||||
|
register "jkdet_pull_enable" = "0"
|
||||||
|
register "jkdet_polarity" = "1" # ActiveLow
|
||||||
|
register "vref_impedance" = "2" # 125kOhm
|
||||||
|
register "micbias_voltage" = "6" # 2.754
|
||||||
|
register "sar_threshold_num" = "4"
|
||||||
|
register "sar_threshold[0]" = "0x0c"
|
||||||
|
register "sar_threshold[1]" = "0x1c"
|
||||||
|
register "sar_threshold[2]" = "0x38"
|
||||||
|
register "sar_threshold[3]" = "0x60"
|
||||||
|
register "sar_hysteresis" = "1"
|
||||||
|
register "sar_voltage" = "0" # VDDA
|
||||||
|
register "sar_compare_time" = "0" # 500ns
|
||||||
|
register "sar_sampling_time" = "0" # 2us
|
||||||
|
register "short_key_debounce" = "2" # 100ms
|
||||||
|
register "jack_insert_debounce" = "7" # 512ms
|
||||||
|
register "jack_eject_debounce" = "7" # 512ms
|
||||||
|
device i2c 1a on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c5 on
|
||||||
|
chip drivers/i2c/generic
|
||||||
|
register "hid" = ""ELAN0000""
|
||||||
|
register "desc" = ""ELAN Touchpad""
|
||||||
|
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||||
|
register "wake" = "GPE0_DW2_14"
|
||||||
|
register "probed" = "1"
|
||||||
|
device i2c 15 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref hda on
|
||||||
|
chip drivers/generic/max98357a
|
||||||
|
register "hid" = ""MX98360A""
|
||||||
|
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
|
||||||
|
register "sdmode_delay" = "5"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pch_espi on
|
||||||
|
chip ec/google/chromeec
|
||||||
|
use conn0 as mux_conn[0]
|
||||||
|
use conn1 as mux_conn[1]
|
||||||
|
device pnp 0c09.0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pmc hidden
|
||||||
|
chip drivers/intel/pmc_mux
|
||||||
|
device generic 0 on
|
||||||
|
chip drivers/intel/pmc_mux/conn
|
||||||
|
use usb2_port1 as usb2_port
|
||||||
|
use tcss_usb3_port1 as usb3_port
|
||||||
|
device generic 0 alias conn0 on end
|
||||||
|
end
|
||||||
|
chip drivers/intel/pmc_mux/conn
|
||||||
|
use usb2_port2 as usb2_port
|
||||||
|
use tcss_usb3_port2 as usb3_port
|
||||||
|
device generic 1 alias conn1 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref tcss_xhci on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device ref tcss_root_hub on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||||
|
device ref tcss_usb3_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-C Port C1 (DB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(2, 1)"
|
||||||
|
device ref tcss_usb3_port2 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref xhci on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device ref xhci_root_hub on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||||
|
device ref usb2_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-C Port C1 (DB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(2, 1)"
|
||||||
|
device ref usb2_port2 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(3, 1)"
|
||||||
|
device ref usb2_port3 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A1 (DB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(4, 1)"
|
||||||
|
device ref usb2_port4 on
|
||||||
|
probe DB_USB DB_1C_1A
|
||||||
|
end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 WWAN""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb2_port4 on
|
||||||
|
probe DB_USB DB_1C_LTE
|
||||||
|
end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Camera""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb2_port6 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Bluetooth""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
register "reset_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||||
|
device ref usb2_port10 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(3, 1)"
|
||||||
|
device ref usb3_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A1 (DB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(4, 1)"
|
||||||
|
device ref usb3_port2 on
|
||||||
|
probe DB_USB DB_1C_1A
|
||||||
|
end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 WWAN""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb3_port2 on
|
||||||
|
probe DB_USB DB_1C_LTE
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
end
|
end
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue