uart8250: Move under drivers/uart

Change-Id: Ic65ffaaa092330ed68d891e4a09a8b86cdc04a3a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5236
Tested-by: build bot (Jenkins)

src/arch/x86/lib/romcc_console.c

@@ -32,7 +32,7 @@
 
 #if CONFIG_CONSOLE_SERIAL8250
 #include "drivers/uart/util.c"
-#include "lib/uart8250.c"
+#include "drivers/uart/uart8250io.c"
 #endif
 #if CONFIG_CONSOLE_NE2K
 #include "drivers/net/ne2k.c"

src/cpu/allwinner/a10/uart.c

@@ -8,7 +8,7 @@
 #include "uart.h"
 #include <arch/io.h>
 #include <console/uart.h>
-#include <uart8250.h>
+#include <drivers/uart/uart8250reg.h>
 
 /**
  * \brief Configure line control settings for UART

src/drivers/uart/Makefile.inc

@@ -5,6 +5,18 @@ bootblock-y += util.c
 smm-y += util.c
 endif
 
+ifeq ($(CONFIG_CONSOLE_SERIAL8250),y)
+romstage-y += uart8250io.c
+ramstage-y += uart8250io.c
+smm-y += uart8250io.c
+endif
+
+ifeq ($(CONFIG_CONSOLE_SERIAL8250MEM),y)
+romstage-y += uart8250mem.c
+ramstage-y += uart8250mem.c
+smm-y += uart8250mem.c
+endif
+
 ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y)
 
 ifeq ($(CONFIG_DRIVERS_UART_PL011),y)

src/drivers/uart/uart8250io.c

@@ -20,8 +20,8 @@
 
 #include <arch/io.h>
 #include <console/uart.h>
-#include <uart8250.h>
 #include <trace.h>
+#include "uart8250reg.h"
 
 /* Should support 8250, 16450, 16550, 16550A type UARTs */
 

src/drivers/uart/uart8250mem.c

@@ -20,9 +20,9 @@
 
 #include <arch/io.h>
 #include <console/uart.h>
-#include <uart8250.h>
 #include <device/device.h>
 #include <delay.h>
+#include "uart8250reg.h"
 
 /* Should support 8250, 16450, 16550, 16550A type UARTs */
 

src/drivers/uart/uart8250reg.h

@@ -17,8 +17,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-#ifndef UART8250_H
-#define UART8250_H
+#ifndef UART8250REG_H
+#define UART8250REG_H
 
 /* Data */
 #define UART_RBR 0x00
@@ -105,4 +105,4 @@
 #define UART_SCR 0x07
 #define UART_SPR 0x07
 
-#endif /* UART8250_H */
+#endif /* UART8250REG_H */

src/lib/Makefile.inc

@@ -46,8 +46,6 @@ romstage-y += cbfs.c
 romstage-$(CONFIG_COMPRESS_RAMSTAGE) += lzma.c
 #romstage-y += lzmadecode.c
 romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c
-romstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
-romstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
 
 ifeq ($(CONFIG_EARLY_CBMEM_INIT),y)
 romstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
@@ -88,8 +86,6 @@ ramstage-y += stack.c
 ramstage-$(CONFIG_ARCH_X86) += gcc.c
 ramstage-y += clog2.c
 romstage-y += clog2.c
-ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
-ramstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
 ramstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
 ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c
 ramstage-$(CONFIG_TRACE) += trace.c
@@ -126,8 +122,6 @@ ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y)
 smm-y += memmove.c
 endif
 smm-y += cbfs.c memcmp.c
-smm-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
-smm-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
 smm-y += gcc.c
 
 $(obj)/lib/version.ramstage.o : $(obj)/build.h