src/sb: Use 'print("%s...", __func__)'
Change-Id: Ie0d845d3e501ed5ebeef1997944445d31768e410 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39373 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
a1b19de447
commit
bfc255a121
|
@ -39,7 +39,7 @@ static void hudson_disable_usb(u8 disable)
|
||||||
|
|
||||||
void hudson_enable(struct device *dev)
|
void hudson_enable(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "hudson_enable()\n");
|
printk(BIOS_DEBUG, "%s()\n", __func__);
|
||||||
switch (dev->path.pci.devfn) {
|
switch (dev->path.pci.devfn) {
|
||||||
case PCI_DEVFN(0x14, 5):
|
case PCI_DEVFN(0x14, 5):
|
||||||
if (dev->enabled == 0) {
|
if (dev->enabled == 0) {
|
||||||
|
|
|
@ -12,7 +12,7 @@
|
||||||
|
|
||||||
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
|
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "smm_setup_structures STUB!!!\n");
|
printk(BIOS_DEBUG, "%s STUB!!!\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
||||||
/** Set the EOS bit and enable SMI generation from southbridge */
|
/** Set the EOS bit and enable SMI generation from southbridge */
|
||||||
|
|
|
@ -108,7 +108,7 @@ static struct pci_operations lops_pci = {
|
||||||
|
|
||||||
static void lpc_init(struct device *dev)
|
static void lpc_init(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "SB800 - Late.c - lpc_init - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Late.c - %s - Start.\n", __func__);
|
||||||
|
|
||||||
cmos_check_update_date();
|
cmos_check_update_date();
|
||||||
|
|
||||||
|
@ -122,7 +122,7 @@ static void lpc_init(struct device *dev)
|
||||||
setup_i8259(); /* Initialize i8259 pic */
|
setup_i8259(); /* Initialize i8259 pic */
|
||||||
setup_i8254(); /* Initialize i8254 timers */
|
setup_i8254(); /* Initialize i8254 timers */
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Late.c - lpc_init - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Late.c - %s - End.\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
||||||
unsigned long acpi_fill_mcfg(unsigned long current)
|
unsigned long acpi_fill_mcfg(unsigned long current)
|
||||||
|
|
|
@ -11,7 +11,7 @@ void lpc_read_resources(struct device *dev)
|
||||||
{
|
{
|
||||||
struct resource *res;
|
struct resource *res;
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_read_resources - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Lpc.c - %s - Start.\n", __func__);
|
||||||
/* Get the normal pci resources of this device */
|
/* Get the normal pci resources of this device */
|
||||||
pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */
|
pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */
|
||||||
|
|
||||||
|
@ -37,14 +37,14 @@ void lpc_read_resources(struct device *dev)
|
||||||
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
|
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
|
||||||
|
|
||||||
compact_resources(dev);
|
compact_resources(dev);
|
||||||
printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_read_resources - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Lpc.c - %s - End.\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
||||||
void lpc_set_resources(struct device *dev)
|
void lpc_set_resources(struct device *dev)
|
||||||
{
|
{
|
||||||
struct resource *res;
|
struct resource *res;
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_set_resources - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Lpc.c - %s - Start.\n", __func__);
|
||||||
|
|
||||||
/* Special case. SPI Base Address. The SpiRomEnable should STAY set. */
|
/* Special case. SPI Base Address. The SpiRomEnable should STAY set. */
|
||||||
res = find_resource(dev, 2);
|
res = find_resource(dev, 2);
|
||||||
|
@ -52,7 +52,7 @@ void lpc_set_resources(struct device *dev)
|
||||||
|
|
||||||
pci_dev_set_resources(dev);
|
pci_dev_set_resources(dev);
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_set_resources - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Lpc.c - %s - End.\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
|
@ -68,7 +68,7 @@ void lpc_enable_childrens_resources(struct device *dev)
|
||||||
int var_num = 0;
|
int var_num = 0;
|
||||||
u16 reg_var[3];
|
u16 reg_var[3];
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_enable_childrens_resources - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Lpc.c - %s - Start.\n", __func__);
|
||||||
reg = pci_read_config32(dev, 0x44);
|
reg = pci_read_config32(dev, 0x44);
|
||||||
reg_x = pci_read_config32(dev, 0x48);
|
reg_x = pci_read_config32(dev, 0x48);
|
||||||
|
|
||||||
|
@ -166,5 +166,5 @@ void lpc_enable_childrens_resources(struct device *dev)
|
||||||
//pci_write_config16(dev, 0x64, reg_var[0]); //cause filo can not find sata
|
//pci_write_config16(dev, 0x64, reg_var[0]); //cause filo can not find sata
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_enable_childrens_resources - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Lpc.c - %s - End.\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
|
@ -50,11 +50,11 @@ int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
|
||||||
u8 byte;
|
u8 byte;
|
||||||
|
|
||||||
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_recv_byte - smbus not ready.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - smbus not ready.\n", __func__);
|
||||||
return -2; /* not ready */
|
return -2; /* not ready */
|
||||||
}
|
}
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_recv_byte - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - Start.\n", __func__);
|
||||||
/* set the device I'm talking to */
|
/* set the device I'm talking to */
|
||||||
outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
|
outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
|
||||||
|
|
||||||
|
@ -71,7 +71,7 @@ int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
|
||||||
/* read results of transaction */
|
/* read results of transaction */
|
||||||
byte = inb(smbus_io_base + SMBHSTCMD);
|
byte = inb(smbus_io_base + SMBHSTCMD);
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_recv_byte - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - End.\n", __func__);
|
||||||
return byte;
|
return byte;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -80,11 +80,11 @@ int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val)
|
||||||
u8 byte;
|
u8 byte;
|
||||||
|
|
||||||
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_send_byte - smbus not ready.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - smbus not ready.\n", __func__);
|
||||||
return -2; /* not ready */
|
return -2; /* not ready */
|
||||||
}
|
}
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_send_byte - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - Start.\n", __func__);
|
||||||
/* set the command... */
|
/* set the command... */
|
||||||
outb(val, smbus_io_base + SMBHSTCMD);
|
outb(val, smbus_io_base + SMBHSTCMD);
|
||||||
|
|
||||||
|
@ -101,7 +101,7 @@ int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val)
|
||||||
return -3; /* timeout or error */
|
return -3; /* timeout or error */
|
||||||
}
|
}
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_send_byte - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - End.\n", __func__);
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -110,11 +110,11 @@ int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address)
|
||||||
u8 byte;
|
u8 byte;
|
||||||
|
|
||||||
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_read_byte - smbus not ready.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - smbus not ready.\n", __func__);
|
||||||
return -2; /* not ready */
|
return -2; /* not ready */
|
||||||
}
|
}
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_read_byte - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - Start.\n", __func__);
|
||||||
/* set the command/address... */
|
/* set the command/address... */
|
||||||
outb(address & 0xff, smbus_io_base + SMBHSTCMD);
|
outb(address & 0xff, smbus_io_base + SMBHSTCMD);
|
||||||
|
|
||||||
|
@ -134,7 +134,7 @@ int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address)
|
||||||
/* read results of transaction */
|
/* read results of transaction */
|
||||||
byte = inb(smbus_io_base + SMBHSTDAT0);
|
byte = inb(smbus_io_base + SMBHSTDAT0);
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_read_byte - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - End.\n", __func__);
|
||||||
return byte;
|
return byte;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -143,11 +143,11 @@ int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val)
|
||||||
u8 byte;
|
u8 byte;
|
||||||
|
|
||||||
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_write_byte - smbus not ready.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - smbus not ready.\n", __func__);
|
||||||
return -2; /* not ready */
|
return -2; /* not ready */
|
||||||
}
|
}
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_write_byte - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - Start.\n", __func__);
|
||||||
/* set the command/address... */
|
/* set the command/address... */
|
||||||
outb(address & 0xff, smbus_io_base + SMBHSTCMD);
|
outb(address & 0xff, smbus_io_base + SMBHSTCMD);
|
||||||
|
|
||||||
|
@ -167,7 +167,7 @@ int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val)
|
||||||
return -3; /* timeout or error */
|
return -3; /* timeout or error */
|
||||||
}
|
}
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - do_smbus_write_byte - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - End.\n", __func__);
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -175,7 +175,7 @@ void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val)
|
||||||
{
|
{
|
||||||
u32 tmp;
|
u32 tmp;
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - alink_ab_indx - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - Start.\n", __func__);
|
||||||
outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX);
|
outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX);
|
||||||
tmp = inl(AB_DATA);
|
tmp = inl(AB_DATA);
|
||||||
/* rpr 4.2
|
/* rpr 4.2
|
||||||
|
@ -191,14 +191,14 @@ void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val)
|
||||||
outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we don't have to do it again. */
|
outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we don't have to do it again. */
|
||||||
outl(tmp, AB_DATA);
|
outl(tmp, AB_DATA);
|
||||||
outl(0, AB_INDX);
|
outl(0, AB_INDX);
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - alink_ab_indx - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - End.\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
||||||
void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val)
|
void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val)
|
||||||
{
|
{
|
||||||
u32 tmp;
|
u32 tmp;
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - alink_rc_indx - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - Start.\n", __func__);
|
||||||
outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX);
|
outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX);
|
||||||
tmp = inl(AB_DATA);
|
tmp = inl(AB_DATA);
|
||||||
/* rpr 4.2
|
/* rpr 4.2
|
||||||
|
@ -214,7 +214,7 @@ void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val)
|
||||||
outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we don't have to do it again. */
|
outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we don't have to do it again. */
|
||||||
outl(tmp, AB_DATA);
|
outl(tmp, AB_DATA);
|
||||||
outl(0, AB_INDX);
|
outl(0, AB_INDX);
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - alink_rc_indx - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - End.\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
||||||
/* space = 0: AX_INDXC, AX_DATAC
|
/* space = 0: AX_INDXC, AX_DATAC
|
||||||
|
@ -224,7 +224,7 @@ void alink_ax_indx(u32 space /*c or p? */, u32 axindc, u32 mask, u32 val)
|
||||||
{
|
{
|
||||||
u32 tmp;
|
u32 tmp;
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - alink_ax_indx - Start.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - Start.\n", __func__);
|
||||||
/* read axindc to tmp */
|
/* read axindc to tmp */
|
||||||
outl(space << 29 | space << 3 | 0x30, AB_INDX);
|
outl(space << 29 | space << 3 | 0x30, AB_INDX);
|
||||||
outl(axindc, AB_DATA);
|
outl(axindc, AB_DATA);
|
||||||
|
@ -243,5 +243,5 @@ void alink_ax_indx(u32 space /*c or p? */, u32 axindc, u32 mask, u32 val)
|
||||||
outl(space << 29 | space << 3 | 0x34, AB_INDX);
|
outl(space << 29 | space << 3 | 0x34, AB_INDX);
|
||||||
outl(tmp, AB_DATA);
|
outl(tmp, AB_DATA);
|
||||||
outl(0, AB_INDX);
|
outl(0, AB_INDX);
|
||||||
printk(BIOS_DEBUG, "SB800 - Smbus.c - alink_ax_indx - End.\n");
|
printk(BIOS_DEBUG, "SB800 - Smbus.c - %s - End.\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
|
@ -26,7 +26,7 @@ int acpi_get_sleep_type(void)
|
||||||
|
|
||||||
void hudson_enable(struct device *dev)
|
void hudson_enable(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "hudson_enable()\n");
|
printk(BIOS_DEBUG, "%s()\n", __func__);
|
||||||
switch (dev->path.pci.devfn) {
|
switch (dev->path.pci.devfn) {
|
||||||
case PCI_DEVFN(0x14, 7): /* SD */
|
case PCI_DEVFN(0x14, 7): /* SD */
|
||||||
if (dev->enabled == 0) {
|
if (dev->enabled == 0) {
|
||||||
|
|
|
@ -12,7 +12,7 @@
|
||||||
|
|
||||||
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
|
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "smm_setup_structures STUB!!!\n");
|
printk(BIOS_DEBUG, "%s STUB!!!\n", __func__);
|
||||||
}
|
}
|
||||||
|
|
||||||
/** Set the EOS bit and enable SMI generation from southbridge */
|
/** Set the EOS bit and enable SMI generation from southbridge */
|
||||||
|
|
|
@ -446,7 +446,7 @@ static void pch_spi_init(const struct device *const dev)
|
||||||
{
|
{
|
||||||
const config_t *const config = dev->chip_info;
|
const config_t *const config = dev->chip_info;
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "pch_spi_init\n");
|
printk(BIOS_DEBUG, "%s\n", __func__);
|
||||||
|
|
||||||
if (config->spi_uvscc)
|
if (config->spi_uvscc)
|
||||||
RCBA32(0x3800 + 0xc8) = config->spi_uvscc;
|
RCBA32(0x3800 + 0xc8) = config->spi_uvscc;
|
||||||
|
@ -526,7 +526,7 @@ static void report_pch_info(struct device *dev)
|
||||||
|
|
||||||
static void lpc_init(struct device *dev)
|
static void lpc_init(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "pch: lpc_init\n");
|
printk(BIOS_DEBUG, "pch: %s\n", __func__);
|
||||||
|
|
||||||
/* Print detected platform */
|
/* Print detected platform */
|
||||||
report_pch_info(dev);
|
report_pch_info(dev);
|
||||||
|
|
|
@ -354,7 +354,7 @@ static void i82801gx_fixups(struct device *dev)
|
||||||
|
|
||||||
static void lpc_init(struct device *dev)
|
static void lpc_init(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "i82801gx: lpc_init\n");
|
printk(BIOS_DEBUG, "i82801gx: %s\n", __func__);
|
||||||
|
|
||||||
/* Set the value for PCI command register. */
|
/* Set the value for PCI command register. */
|
||||||
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
||||||
|
|
|
@ -366,7 +366,7 @@ static void i82801ix_set_acpi_mode(struct device *dev)
|
||||||
|
|
||||||
static void lpc_init(struct device *dev)
|
static void lpc_init(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "i82801ix: lpc_init\n");
|
printk(BIOS_DEBUG, "i82801ix: %s\n", __func__);
|
||||||
|
|
||||||
/* Set the value for PCI command register. */
|
/* Set the value for PCI command register. */
|
||||||
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
||||||
|
|
|
@ -371,7 +371,7 @@ static void i82801jx_set_acpi_mode(struct device *dev)
|
||||||
|
|
||||||
static void lpc_init(struct device *dev)
|
static void lpc_init(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "i82801jx: lpc_init\n");
|
printk(BIOS_DEBUG, "i82801jx: %s\n", __func__);
|
||||||
|
|
||||||
/* Set the value for PCI command register. */
|
/* Set the value for PCI command register. */
|
||||||
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
||||||
|
|
|
@ -72,13 +72,13 @@ static void p64h2_ioapic_init(struct device *dev)
|
||||||
*pWindowRegister = (*pWindowRegister & ~(0x0f << 24)) | apic_id; // Set the ID
|
*pWindowRegister = (*pWindowRegister & ~(0x0f << 24)) | apic_id; // Set the ID
|
||||||
|
|
||||||
if ((*pWindowRegister & (0x0f << 24)) != apic_id)
|
if ((*pWindowRegister & (0x0f << 24)) != apic_id)
|
||||||
die("p64h2_ioapic_init failed");
|
die("%s failed", __func__);
|
||||||
|
|
||||||
*pIndexRegister = 3; // Select Boot Configuration register
|
*pIndexRegister = 3; // Select Boot Configuration register
|
||||||
*pWindowRegister |= 1; // Use Processor System Bus to deliver interrupts
|
*pWindowRegister |= 1; // Use Processor System Bus to deliver interrupts
|
||||||
|
|
||||||
if (!(*pWindowRegister & 1))
|
if (!(*pWindowRegister & 1))
|
||||||
die("p64h2_ioapic_init failed");
|
die("%s failed", __func__);
|
||||||
}
|
}
|
||||||
|
|
||||||
static struct device_operations ioapic_ops = {
|
static struct device_operations ioapic_ops = {
|
||||||
|
|
|
@ -441,7 +441,7 @@ static void pch_fixups(struct device *dev)
|
||||||
|
|
||||||
static void lpc_init(struct device *dev)
|
static void lpc_init(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "pch: lpc_init\n");
|
printk(BIOS_DEBUG, "pch: %s\n", __func__);
|
||||||
|
|
||||||
/* Set the value for PCI command register. */
|
/* Set the value for PCI command register. */
|
||||||
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
||||||
|
|
|
@ -509,7 +509,7 @@ static void pch_fixups(struct device *dev)
|
||||||
|
|
||||||
static void lpc_init(struct device *dev)
|
static void lpc_init(struct device *dev)
|
||||||
{
|
{
|
||||||
printk(BIOS_DEBUG, "pch: lpc_init\n");
|
printk(BIOS_DEBUG, "pch: %s\n", __func__);
|
||||||
|
|
||||||
/* Set the value for PCI command register. */
|
/* Set the value for PCI command register. */
|
||||||
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
pci_write_config16(dev, PCI_COMMAND, 0x000f);
|
||||||
|
|
Loading…
Reference in New Issue