sb/intel/common: Rename i2c_block_read() to i2c_eeprom_read()

Datasheets describe the used command as 'I2C Read' but adding the
word 'eeprom' in between should avoid further confusion with other
block commands.

Followups will add a symmetrical pair of commands i2c_block_read()
and i2c_block_write() that operate via I2C_EN bit and have a 32
byte size restriction on block transfers. For some hardware revision
these block commands are available, while 'I2C Read' was not.

Change-Id: I4494ab2985afc7f737ddacc8d706a5d5395e35cf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

src/northbridge/intel/i945/raminit.c

@@ -381,7 +381,7 @@ static void gather_common_timing(struct sys_info *sysinfo,
 		 * only the first 64 bytes contain data needed for raminit.
 		 */
 
-		bytes_read = i2c_block_read(device, 0, 64, raw_spd);
+		bytes_read = i2c_eeprom_read(device, 0, 64, raw_spd);
 		printk(BIOS_DEBUG, "Reading SPD using i2c block operation.\n");
 		if (IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) && bytes_read > 0)
 			hexdump(raw_spd, bytes_read);

src/northbridge/intel/pineview/raminit.c

@@ -273,7 +273,7 @@ static void sdram_read_spds(struct sysinfo *s)
 	u8 i, chan;
 	s->dt0mode = 0;
 	FOR_EACH_DIMM(i) {
-		if (i2c_block_read(s->spd_map[i], 0, 64, s->dimms[i].spd_data) != 64)
+		if (i2c_eeprom_read(s->spd_map[i], 0, 64, s->dimms[i].spd_data) != 64)
 			s->dimms[i].card_type = 0;
 
 		s->dimms[i].card_type = s->dimms[i].spd_data[62] & 0x1f;

src/northbridge/intel/x4x/raminit.c

@@ -47,15 +47,15 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
 static u16 ddr2_get_crc(u8 device, u8 len)
 {
 	u8 raw_spd[128] = {};
-	i2c_block_read(device, 64, 9, &raw_spd[64]);
-	i2c_block_read(device, 93, 6, &raw_spd[93]);
+	i2c_eeprom_read(device, 64, 9, &raw_spd[64]);
+	i2c_eeprom_read(device, 93, 6, &raw_spd[93]);
 	return spd_ddr2_calc_unique_crc(raw_spd, len);
 }
 
 static u16 ddr3_get_crc(u8 device, u8 len)
 {
 	u8 raw_spd[256] = {};
-	i2c_block_read(device, 117, 11, &raw_spd[117]);
+	i2c_eeprom_read(device, 117, 11, &raw_spd[117]);
 	return spd_ddr3_calc_unique_crc(raw_spd, len);
 }
 
@@ -531,7 +531,7 @@ static void decode_spd_select_timings(struct sysinfo *s)
 			die("Mixing up dimm types is not supported!\n");
 
 		printk(BIOS_DEBUG, "Decoding dimm %d\n", i);
-		if (i2c_block_read(device, 0, 128, raw_spd) != 128) {
+		if (i2c_eeprom_read(device, 0, 128, raw_spd) != 128) {
 			printk(BIOS_DEBUG, "i2c block operation failed,"
 				" trying smbus byte operation.\n");
 			for (j = 0; j < 128; j++)

src/southbridge/intel/common/smbus.c

@@ -363,11 +363,22 @@ int do_smbus_block_write(unsigned int smbus_base, u8 device, u8 cmd,
 }
 
 /* Only since ICH5 */
-int do_i2c_block_read(unsigned int smbus_base, u8 device,
+static int has_i2c_read_command(void)
+{
+	if (IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) ||
+	    IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_I82801DX))
+		return 0;
+	return 1;
+}
+
+int do_i2c_eeprom_read(unsigned int smbus_base, u8 device,
 		unsigned int offset, const unsigned int bytes, u8 *buf)
 {
 	int ret;
 
+	if (!has_i2c_read_command())
+		return SMBUS_ERROR;
+
 	/* Set up for a i2c block data read.
 	 *
 	 * FIXME: Address parameter changes to XMIT_READ(device) with

src/southbridge/intel/common/smbus.h

@@ -41,6 +41,6 @@ int do_smbus_block_read(unsigned int smbus_base, u8 device,
 int do_smbus_block_write(unsigned int smbus_base, u8 device,
 			u8 cmd, unsigned int bytes, const u8 *buf);
 /* Only since ICH5 */
-int do_i2c_block_read(unsigned int smbus_base, u8 device,
+int do_i2c_eeprom_read(unsigned int smbus_base, u8 device,
 		unsigned int offset, unsigned int bytes, u8 *buf);
 #endif

src/southbridge/intel/i82801gx/early_smbus.c

@@ -54,9 +54,9 @@ int smbus_read_byte(unsigned int device, unsigned int address)
 	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
-int i2c_block_read(unsigned int device, unsigned int offset, u32 bytes, u8 *buf)
+int i2c_eeprom_read(unsigned int device, unsigned int offset, u32 bytes, u8 *buf)
 {
-	return do_i2c_block_read(SMBUS_IO_BASE, device, offset, bytes, buf);
+	return do_i2c_eeprom_read(SMBUS_IO_BASE, device, offset, bytes, buf);
 }
 
 int smbus_block_read(unsigned int device, unsigned int cmd, u8 bytes, u8 *buf)

src/southbridge/intel/i82801gx/i82801gx.h

@@ -45,7 +45,7 @@ void i82801gx_enable(struct device *dev);
 #else
 void enable_smbus(void);
 int smbus_read_byte(unsigned int device, unsigned int address);
-int i2c_block_read(unsigned int device, unsigned int cmd, unsigned int bytes,
+int i2c_eeprom_read(unsigned int device, unsigned int cmd, unsigned int bytes,
 		u8 *buf);
 int smbus_block_read(unsigned int device, unsigned int cmd, u8 bytes, u8 *buf);
 int smbus_block_write(unsigned int device, unsigned int cmd, u8 bytes,

src/southbridge/intel/i82801jx/early_smbus.c

@@ -51,9 +51,9 @@ int smbus_read_byte(unsigned device, unsigned address)
 	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
-int i2c_block_read(unsigned int device, unsigned int offset, u32 bytes, u8 *buf)
+int i2c_eeprom_read(unsigned int device, unsigned int offset, u32 bytes, u8 *buf)
 {
-	return do_i2c_block_read(SMBUS_IO_BASE, device, offset, bytes, buf);
+	return do_i2c_eeprom_read(SMBUS_IO_BASE, device, offset, bytes, buf);
 }
 
 int smbus_block_read(unsigned int device, unsigned int cmd, u8 bytes, u8 *buf)

src/southbridge/intel/i82801jx/i82801jx.h

@@ -233,7 +233,7 @@ static inline int lpc_is_mobile(const u16 devid)
 #if defined(__PRE_RAM__)
 void enable_smbus(void);
 int smbus_read_byte(unsigned device, unsigned address);
-int i2c_block_read(unsigned int device, unsigned int cmd, unsigned int bytes,
+int i2c_eeprom_read(unsigned int device, unsigned int cmd, unsigned int bytes,
 		u8 *buf);
 int smbus_block_read(unsigned int device, unsigned int cmd, u8 bytes, u8 *buf);
 int smbus_block_write(unsigned int device, unsigned int cmd, u8 bytes,