* Simplify acpi_add_table
* fix some comments * Simplify ACPI wakeup code and make it work without a memory hole * Add resume entries to global GDT so we don't need our own for resume. * add ECDT description to acpi.h for anyone who might need it ;-) * remove rather stupid math to get the right number of MAX_ACPI_TABLES and just define a reasonable maximum for now. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4932 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
parent
a0141f050b
commit
c0ac7e9046
|
@ -18,7 +18,8 @@
|
|||
* write_acpi_tables()
|
||||
* acpi_dump_apics()
|
||||
*
|
||||
* See AMD Solo, Island Aruma or Via Epia-M port for more details.
|
||||
* See Kontron 986LCD-M port for a good example of an ACPI implementation
|
||||
* in coreboot.
|
||||
*/
|
||||
|
||||
#include <console/console.h>
|
||||
|
@ -26,6 +27,7 @@
|
|||
#include <arch/acpi.h>
|
||||
#include <arch/acpigen.h>
|
||||
#include <device/pci.h>
|
||||
#include <cbmem.h>
|
||||
|
||||
u8 acpi_checksum(u8 *table, u32 length)
|
||||
{
|
||||
|
@ -37,42 +39,60 @@ u8 acpi_checksum(u8 *table, u32 length)
|
|||
return -ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* add an acpi table to rsdt structure, and recalculate checksum
|
||||
/**
|
||||
* Add an ACPI table to the RSDT (and XSDT) structure, recalculate length and checksum
|
||||
*/
|
||||
|
||||
void acpi_add_table(acpi_rsdp_t *rsdp, void *table)
|
||||
{
|
||||
int i;
|
||||
int i, entries_num;
|
||||
acpi_rsdt_t *rsdt;
|
||||
acpi_xsdt_t *xsdt = NULL;
|
||||
|
||||
/* The RSDT is mandatory ... */
|
||||
rsdt = (acpi_rsdt_t *)rsdp->rsdt_address;
|
||||
|
||||
/* ... while the XSDT is not */
|
||||
if (rsdp->xsdt_address) {
|
||||
xsdt = (acpi_xsdt_t *)((u32)rsdp->xsdt_address);
|
||||
}
|
||||
|
||||
int entries_num = ARRAY_SIZE(rsdt->entry);
|
||||
/* This should always be MAX_ACPI_TABLES */
|
||||
entries_num = ARRAY_SIZE(rsdt->entry);
|
||||
|
||||
for (i=0; i<entries_num; i++) {
|
||||
if(rsdt->entry[i]==0) {
|
||||
rsdt->entry[i]=(u32)table;
|
||||
/* fix length to stop kernel whining about invalid entries */
|
||||
for (i = 0; i < entries_num; i++) {
|
||||
if(rsdt->entry[i] == 0)
|
||||
break;
|
||||
}
|
||||
|
||||
if (i >= entries_num) {
|
||||
printk_err("ACPI: Error: Could not add ACPI table, too many tables.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/* Add table to the RSDT */
|
||||
rsdt->entry[i] = (u32)table;
|
||||
|
||||
/* Fix RSDT length or the kernel will assume invalid entries */
|
||||
rsdt->header.length = sizeof(acpi_header_t) + (sizeof(u32) * (i+1));
|
||||
/* fix checksum */
|
||||
/* hope this won't get optimized away */
|
||||
rsdt->header.checksum=0;
|
||||
rsdt->header.checksum=acpi_checksum((u8 *)rsdt,
|
||||
|
||||
/* Re-calculate checksum */
|
||||
rsdt->header.checksum = 0; /* Hope this won't get optimized away */
|
||||
rsdt->header.checksum = acpi_checksum((u8 *)rsdt,
|
||||
rsdt->header.length);
|
||||
|
||||
/* And now the same thing for the XSDT. We use the same
|
||||
* index as we want the XSDT and RSDT to always be in
|
||||
* sync in coreboot.
|
||||
/* And now the same thing for the XSDT. We use the same index as for
|
||||
* now we want the XSDT and RSDT to always be in sync in coreboot.
|
||||
*/
|
||||
if (xsdt) {
|
||||
/* Add table to the XSDT */
|
||||
xsdt->entry[i]=(u64)(u32)table;
|
||||
|
||||
/* Fix XSDT length */
|
||||
xsdt->header.length = sizeof(acpi_header_t) +
|
||||
(sizeof(u64) * (i+1));
|
||||
|
||||
/* Re-calculate checksum */
|
||||
xsdt->header.checksum=0;
|
||||
xsdt->header.checksum=acpi_checksum((u8 *)xsdt,
|
||||
xsdt->header.length);
|
||||
|
@ -80,11 +100,6 @@ void acpi_add_table(acpi_rsdp_t *rsdp, void *table)
|
|||
|
||||
printk_debug("ACPI: added table %d/%d Length now %d\n",
|
||||
i+1, entries_num, rsdt->header.length);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
printk_err("ACPI: Error: Could not add ACPI table, too many tables.\n");
|
||||
}
|
||||
|
||||
int acpi_create_mcfg_mmconfig(acpi_mcfg_mmconfig_t *mmconfig, u32 base, u16 seg_nr, u8 start, u8 end)
|
||||
|
@ -222,7 +237,8 @@ void acpi_create_mcfg(acpi_mcfg_t *mcfg)
|
|||
}
|
||||
|
||||
/* this can be overriden by platform ACPI setup code,
|
||||
if it calls acpi_create_ssdt_generator */
|
||||
* if it calls acpi_create_ssdt_generator
|
||||
*/
|
||||
unsigned long __attribute__((weak)) acpi_fill_ssdt_generator(unsigned long current,
|
||||
const char *oem_table_id) {
|
||||
return current;
|
||||
|
@ -560,10 +576,29 @@ extern char *lowmem_backup;
|
|||
extern char *lowmem_backup_ptr;
|
||||
extern int lowmem_backup_size;
|
||||
|
||||
#define WAKEUP_BASE 0x600
|
||||
|
||||
void (*acpi_do_wakeup)(u32 vector, u32 backup_source, u32 backup_target, u32
|
||||
backup_size) __attribute__((regparm(0))) = (void *)WAKEUP_BASE;
|
||||
|
||||
extern unsigned char __wakeup, __wakeup_size;
|
||||
|
||||
void acpi_jump_to_wakeup(void *vector)
|
||||
{
|
||||
u32 acpi_backup_memory = (u32) cbmem_find(CBMEM_ID_RESUME);
|
||||
|
||||
if (!acpi_backup_memory) {
|
||||
printk(BIOS_WARNING, "ACPI: Backup memory missing. No S3 Resume.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
// FIXME this should go into the ACPI backup memory, too. No pork saussages.
|
||||
/* just restore the SMP trampoline and continue with wakeup on assembly level */
|
||||
memcpy(lowmem_backup_ptr, lowmem_backup, lowmem_backup_size);
|
||||
acpi_jmp_to_realm_wakeup((u32) vector);
|
||||
|
||||
/* copy wakeup trampoline in place */
|
||||
memcpy(WAKEUP_BASE, &__wakeup, &__wakeup_size);
|
||||
|
||||
acpi_do_wakeup((u32)vector, acpi_backup_memory, CONFIG_RAMBASE, HIGH_MEMORY_SAVE);
|
||||
}
|
||||
#endif
|
||||
|
|
|
@ -2,10 +2,11 @@
|
|||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2009 Rudolf Marek <r.marek@assembler.cz>
|
||||
* Copyright (C) 2009 coresystems GmbH
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License v2 as published by
|
||||
* the Free Software Foundation.
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
|
@ -16,76 +17,89 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
.text
|
||||
.code32
|
||||
.globl acpi_jmp_to_realm_wakeup
|
||||
/* This function does the PM -> RM switch, but
|
||||
it can run >1MB even in real mode */
|
||||
|
||||
acpi_jmp_to_realm_wakeup:
|
||||
mov 0x4(%esp), %eax
|
||||
#define WAKEUP_BASE 0x600
|
||||
#define RELOCATED(x) (x - __wakeup + WAKEUP_BASE)
|
||||
|
||||
/* CR0 bits */
|
||||
#define PE (1 << 0)
|
||||
|
||||
.code32
|
||||
.globl __wakeup
|
||||
__wakeup:
|
||||
/* First prepare the jmp to the resume vector */
|
||||
mov 0x4(%esp), %eax /* vector */
|
||||
/* last 4 bits of linear addr are taken as offset */
|
||||
andw $0x0f, %ax
|
||||
movw %ax, (jmp_off)
|
||||
movw %ax, (__wakeup_offset)
|
||||
mov 0x4(%esp), %eax
|
||||
/* the rest is taken as segment */
|
||||
shr $4, %eax
|
||||
movw %ax, (jmp_seg)
|
||||
lgdt gdtaddr_wakeup
|
||||
movl $0x008,%eax
|
||||
mov %eax,%ds
|
||||
movl %eax,%es
|
||||
movl %eax,%ss
|
||||
movl %eax,%fs
|
||||
movl %eax,%gs
|
||||
ljmp $0x0010,$reload_cs
|
||||
.code16gcc
|
||||
reload_cs:
|
||||
/* switch off PE */
|
||||
movw %ax, (__wakeup_segment)
|
||||
|
||||
/* Then overwrite coreboot with our backed up memory */
|
||||
movl 8(%esp), %esi
|
||||
movl 12(%esp), %edi
|
||||
movl 16(%esp), %ecx
|
||||
shrl $4, %ecx
|
||||
1:
|
||||
movl 0(%esi),%eax
|
||||
movl 4(%esi),%edx
|
||||
movl 8(%esi),%ebx
|
||||
movl 12(%esi),%ebp
|
||||
addl $16,%esi
|
||||
subl $1,%ecx
|
||||
movl %eax,0(%edi)
|
||||
movl %edx,4(%edi)
|
||||
movl %ebx,8(%edi)
|
||||
movl %ebp,12(%edi)
|
||||
leal 16(%edi),%edi
|
||||
jne 1b
|
||||
|
||||
/* Activate the right segment descriptor real mode. */
|
||||
ljmp $0x28, $RELOCATED(1f)
|
||||
1:
|
||||
.code16
|
||||
/* 16 bit code from here on... */
|
||||
|
||||
/* Load the segment registers w/ properly configured
|
||||
* segment descriptors. They will retain these
|
||||
* configurations (limits, writability, etc.) once
|
||||
* protected mode is turned off.
|
||||
*/
|
||||
mov $0x30, %ax
|
||||
mov %ax, %ds
|
||||
mov %ax, %es
|
||||
mov %ax, %fs
|
||||
mov %ax, %gs
|
||||
mov %ax, %ss
|
||||
|
||||
/* Turn off protection */
|
||||
movl %cr0, %eax
|
||||
andb $0xfe,%al
|
||||
andl $~PE, %eax
|
||||
movl %eax, %cr0
|
||||
ljmpl $0x0, $cpu_flushed
|
||||
cpu_flushed:
|
||||
|
||||
/* Now really going into real mode */
|
||||
ljmp $0, $RELOCATED(1f)
|
||||
1:
|
||||
movw $0x0, %ax
|
||||
movw %ax, %ds
|
||||
movw %ax, %es
|
||||
movw %ax, %ss
|
||||
movw %ax, %fs
|
||||
movw %ax, %gs
|
||||
/* far jump to OS waking vector. The linear addr is changed to SEG and OFFSET
|
||||
check ACPI specs or above code for details */
|
||||
|
||||
/* This is a FAR JMP to the OS waking vector. The C code changed
|
||||
* the address to be correct.
|
||||
*/
|
||||
.byte 0xea
|
||||
jmp_off:
|
||||
.word 0
|
||||
jmp_seg:
|
||||
.word 0
|
||||
|
||||
.code32
|
||||
gdt_wakeup_limit = gdt_wakeup_end - gdt_wakeup - 1 /* compute the table limit */
|
||||
gdtaddr_wakeup:
|
||||
.word gdt_wakeup_limit /* the table limit */
|
||||
.long gdt_wakeup /* we know the offset */
|
||||
__wakeup_offset = RELOCATED(.)
|
||||
.word 0x0000
|
||||
|
||||
.data
|
||||
__wakeup_segment = RELOCATED(.)
|
||||
.word 0x0000
|
||||
|
||||
/* This is the gdt for GCC part of coreboot.
|
||||
* It is different from the gdt in ROMCC/ASM part of coreboot
|
||||
* which is defined in entry32.inc */
|
||||
gdt_wakeup:
|
||||
/* selgdt 0, unused */
|
||||
.word 0x0000, 0x0000 /* dummy */
|
||||
.byte 0x00, 0x00, 0x00, 0x00
|
||||
.globl __wakeup_size
|
||||
__wakeup_size = ( . - __wakeup)
|
||||
|
||||
/* selgdt 8, flat data segment 16bit */
|
||||
.word 0x0000, 0x0000 /* dummy */
|
||||
.byte 0x00, 0x93, 0x8f, 0x00 /* G=1 and 0x0f, So we get 4Gbytes for limit */
|
||||
|
||||
/* selgdt 0x10, flat code segment 16bit */
|
||||
.word 0xffff, 0x0000
|
||||
.byte 0x00, 0x9b, 0x8f, 0x00 /* G=1 and 0x0f, So we get 4Gbytes for limit */
|
||||
|
||||
gdt_wakeup_end:
|
||||
|
||||
.previous
|
||||
.code32
|
||||
|
|
|
@ -3,14 +3,25 @@
|
|||
*
|
||||
* written by Stefan Reinauer <stepan@coresystems.de>
|
||||
* Copyright (C) 2004 SUSE LINUX AG
|
||||
* Copyright (C) 2004 Nick Barker
|
||||
* Copyright (C) 2008-2009 coresystems GmbH
|
||||
*
|
||||
* The ACPI table structs are based on the Linux kernel sources.
|
||||
* ACPI FADT & FACS added by Nick Barker <nick.barker9@btinternet.com>
|
||||
* those parts (C) 2004 Nick Barker
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; version 2 of
|
||||
* the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
|
||||
#ifndef __ASM_ACPI_H
|
||||
#define __ASM_ACPI_H
|
||||
|
||||
|
@ -48,6 +59,12 @@ typedef struct acpi_gen_regaddr {
|
|||
u32 addrh;
|
||||
} __attribute__ ((packed)) acpi_addr_t;
|
||||
|
||||
#define ACPI_ADDRESS_SPACE_MEMORY 0
|
||||
#define ACPI_ADDRESS_SPACE_IO 1
|
||||
#define ACPI_ADDRESS_SPACE_PCI 2
|
||||
#define ACPI_ADDRESS_SPACE_FIXED 0x7f
|
||||
|
||||
|
||||
/* Generic ACPI Header, provided by (almost) all tables */
|
||||
|
||||
typedef struct acpi_table_header /* ACPI common table header */
|
||||
|
@ -63,12 +80,8 @@ typedef struct acpi_table_header /* ACPI common table header */
|
|||
u32 asl_compiler_revision; /* ASL compiler revision number */
|
||||
} __attribute__ ((packed)) acpi_header_t;
|
||||
|
||||
/* FIXME: This is very fragile:
|
||||
* MCONFIG, HPET, FADT, SRAT, SLIT, MADT(APIC), SSDT, SSDTX, and SSDT for CPU
|
||||
* pstate
|
||||
*/
|
||||
|
||||
#define MAX_ACPI_TABLES (7 + CONFIG_ACPI_SSDTX_NUM + CONFIG_MAX_CPUS)
|
||||
/* A maximum number of 32 ACPI tables ought to be enough for now */
|
||||
#define MAX_ACPI_TABLES 32
|
||||
|
||||
/* RSDT */
|
||||
typedef struct acpi_rsdt {
|
||||
|
@ -330,6 +343,16 @@ typedef struct acpi_facs {
|
|||
//
|
||||
#define ACPI_FACS_S4BIOS_F (1 << 0)
|
||||
|
||||
typedef struct acpi_ecdt {
|
||||
struct acpi_table_header header;
|
||||
struct acpi_gen_regaddr ec_control;
|
||||
struct acpi_gen_regaddr ec_data;
|
||||
u32 uid;
|
||||
u8 gpe_bit;
|
||||
u8 ec_id[];
|
||||
} __attribute__ ((packed)) acpi_ecdt_t;
|
||||
|
||||
|
||||
/* These are implemented by the target port */
|
||||
unsigned long write_acpi_tables(unsigned long addr);
|
||||
unsigned long acpi_fill_madt(unsigned long current);
|
||||
|
@ -382,7 +405,7 @@ extern u8 acpi_slp_type;
|
|||
void suspend_resume(void);
|
||||
void *acpi_find_wakeup_vector(void);
|
||||
void *acpi_get_wakeup_rsdp(void);
|
||||
void acpi_jmp_to_realm_wakeup(u32 linear_addr);
|
||||
void acpi_jmp_to_realm_wakeup(u32 linear_addr) __attribute__((regparm(0)));
|
||||
void acpi_jump_to_wakeup(void *wakeup_addr);
|
||||
|
||||
int acpi_get_sleep_type(void);
|
||||
|
|
|
@ -253,7 +253,16 @@ gdtaddr:
|
|||
|
||||
/* This is the gdt for GCC part of coreboot.
|
||||
* It is different from the gdt in ROMCC/ASM part of coreboot
|
||||
* which is defined in entry32.inc */ /* BUT WHY?? */
|
||||
* which is defined in entry32.inc
|
||||
*
|
||||
* When the machine is initially started, we use a very simple
|
||||
* gdt from rom (that in entry32.inc) which only contains those
|
||||
* entries we need for protected mode.
|
||||
*
|
||||
* When we're executing code from RAM, we want to do more complex
|
||||
* stuff, like initializing PCI option roms in real mode, or doing
|
||||
* a resume from a suspend to ram.
|
||||
*/
|
||||
gdt:
|
||||
/* selgdt 0, unused */
|
||||
.word 0x0000, 0x0000 /* dummy */
|
||||
|
@ -275,6 +284,8 @@ gdt:
|
|||
.word 0x0000, 0x0000 /* dummy */
|
||||
.byte 0x00, 0x00, 0x00, 0x00
|
||||
|
||||
/* The next two entries are used for executing VGA option ROMs */
|
||||
|
||||
/* selgdt 0x28 16-bit 64k code at 0x00000000 */
|
||||
.word 0xffff, 0x0000
|
||||
.byte 0, 0x9a, 0, 0
|
||||
|
@ -282,6 +293,16 @@ gdt:
|
|||
/* selgdt 0x30 16-bit 64k data at 0x00000000 */
|
||||
.word 0xffff, 0x0000
|
||||
.byte 0, 0x92, 0, 0
|
||||
|
||||
/* The next two entries are used for ACPI S3 RESUME */
|
||||
|
||||
/* selgdt 0x38, flat data segment 16bit */
|
||||
.word 0x0000, 0x0000 /* dummy */
|
||||
.byte 0x00, 0x93, 0x8f, 0x00 /* G=1 and 0x0f, So we get 4Gbytes for limit */
|
||||
|
||||
/* selgdt 0x40, flat code segment 16bit */
|
||||
.word 0xffff, 0x0000
|
||||
.byte 0x00, 0x9b, 0x8f, 0x00 /* G=1 and 0x0f, So we get 4Gbytes for limit */
|
||||
gdt_end:
|
||||
|
||||
idtarg:
|
||||
|
|
Loading…
Reference in New Issue