diff --git a/util/superiotool/winbond.c b/util/superiotool/winbond.c
index 96b082e090..03985f0a74 100644
--- a/util/superiotool/winbond.c
+++ b/util/superiotool/winbond.c
@@ -233,7 +233,71 @@ static const struct superio_registers reg_table[] = {
 			{0x00,0x48,0x48,0x48,0x48,0x00,0x00,0x48,0x00,0x00,
 			 EOT}},
 		{EOT}}},
-	{0xa23, "W83627UHG", {/* TODO: Not yet in sensors-detect */
+	{0xa23, "W83627UHG = NCT6627UD", {	/* TODO: Not yet in sensors-detect 	   */
+		{NOLDN, NULL,	  		/* CR2B (485) is only valid for chip rev.E */
+			{0x02,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
+			 0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
+			{0x00,0xa2,NANA,0xff,0xF0,MISC,0x00,MISC,RSVD,0x00,
+			 0x00,0x00,0x00,0x02,0x00,0x00,0x00,EOT}},
+		{0x0, "Floppy",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5,
+			 EOT},
+			{0x01,0x03,0xf0,0x06,0x02,0x8e,0x00,0xff,0x00,0x00,
+			 EOT}},
+		{0x1, "Parallel port",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+			{0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+		{0x2, "UART A",
+			{0x30,0x60,0x61,0x70,0xf0,EOT},
+			{0x01,0x03,0xf8,0x04,0x00,EOT}},
+		{0x3, "UART B",
+			{0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+			{0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+		{0x5, "Keyboard",
+			{0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+			{0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x83,EOT}},
+		{0x6, "UART C",
+			{0x30,0x60,0x61,0x70,0xf0,EOT},
+			{0x01,0x03,0xE0,0x04,0x00,EOT}},
+		{0x7, "GPIO 3, GPIO 4",
+			{0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,EOT},
+			{0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,EOT}},
+		{0x8, "WDTO#, PLED, GPIO 5,6 & GPIO Base Address",
+			{0x30,0x60,0x61,
+			 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,
+			 0xF5,0xF6,0xF7,EOT},
+			{0x02,0x00,0x00,
+			 0xFF,0x00,0x00,0x00,0xFF,0x1F,0x00,0x00,
+			 0x00,0x00,0x00,EOT}},
+		{0x9, "GPIO 1, GPIO 2 and SUSLED",
+			{0x30,
+			 0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+			 0xF3,EOT},
+			{0x00,
+			 0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,
+			 0x00,EOT}},
+		{0xa, "ACPI",
+			{0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+			 0xe8,0xe9,0xf2,0xf3,0xf4,0xf6,0xf7,0xfe,EOT},
+			{0x00,0x00,0x01,0x00,0xff,0x08,0x00,0x00,0x1c,0x00,
+			 RSVD,RSVD,0x3e,0x00,0x00,0x00,0x00,0x00,EOT}},
+		{0xb, "Hardware monitor",
+			{0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
+			{0x00,0x00,0x00,0x00,RSVD,RSVD,0x00,EOT}},
+		{0xc, "PECI, SST",
+			{0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,
+			 0xf1,0xf2,0xf3,0xfe,0xff,EOT},
+			{0x00,0x48,0x48,0x48,0x48,0x00,RSVD,RSVD,0x00,
+			 0x48,0x50,0x10,0x23,0x5A,EOT}},
+		{0xD, "UART D",
+			{0x30,0x60,0x61,0x70,0xf0,EOT},
+			{0x00,0x02,0xe0,0x03,0x00,EOT}},
+		{0xE, "UART E",
+			{0x30,0x60,0x61,0x70,0xf0,EOT},
+			{0x00,0x03,0xe8,0x04,0x00,EOT}},
+		{0xF, "UART F",
+			{0x30,0x60,0x61,0x70,0xf0,EOT},
+			{0x00,0x02,0xe8,0x03,0x00,EOT}},
 		{EOT}}},
 	{0xa51, "W83667HG", {
 		/* See also: http://lists.lm-sensors.org/pipermail/lm-sensors/2008-July/023683.html */