diff --git a/src/cpu/samsung/exynos5420/Makefile.inc b/src/cpu/samsung/exynos5420/Makefile.inc index 704a346209..4169a2efac 100644 --- a/src/cpu/samsung/exynos5420/Makefile.inc +++ b/src/cpu/samsung/exynos5420/Makefile.inc @@ -48,8 +48,7 @@ ramstage-y += monotonic_timer.c ramstage-y += timer.c ramstage-y += gpio.c ramstage-y += i2c.c -ramstage-y += dp-reg.c -ramstage-y += fb.c +ramstage-y += dp.c dp_lowlevel.c fimd.c ramstage-y += usb.c ramstage-y += cbmem.c diff --git a/src/cpu/samsung/exynos5420/clock_init.c b/src/cpu/samsung/exynos5420/clock_init.c index 2ce975cd1d..069fd8fdb7 100644 --- a/src/cpu/samsung/exynos5420/clock_init.c +++ b/src/cpu/samsung/exynos5420/clock_init.c @@ -30,7 +30,7 @@ void system_clock_init(void) { struct exynos5420_clock *clk = - (struct exynos5420_clock *)EXYNOS5_CLOCK_BASE; + (struct exynos5420_clock *)EXYNOS5420_CLOCK_BASE; struct exynos5_mct_regs *mct_regs = (struct exynos5_mct_regs *)EXYNOS5_MULTI_CORE_TIMER_BASE; u32 val; @@ -49,6 +49,7 @@ void system_clock_init(void) writel(IPLL_LOCK_VAL, &clk->ipll_lock); writel(SPLL_LOCK_VAL, &clk->spll_lock); writel(KPLL_LOCK_VAL, &clk->kpll_lock); + writel(RPLL_LOCK_VAL, &clk->rpll_lock); setbits_le32(&clk->clk_src_cpu, MUX_HPM_SEL_MASK); @@ -85,7 +86,7 @@ void system_clock_init(void) /* Set DPLL */ writel(DPLL_CON1_VAL, &clk->dpll_con1); - val = set_pll(0xc8, 0x2, 0x2); + val = set_pll(0x190, 0x4, 0x2); writel(val, &clk->dpll_con0); while ((readl(&clk->dpll_con0) & PLL_LOCKED) == 0) ; @@ -133,6 +134,22 @@ void system_clock_init(void) while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0) ; + /* We use RPLL as the source for FIMD video stream clock */ + writel(RPLL_CON1_VAL, &clk->rpll_con1); + writel(RPLL_CON2_VAL, &clk->rpll_con2); + /* computed by gabe from first principles; u-boot is probably + * wrong again + */ + val = set_pll(0xa0, 0x3, 0x2); + writel(val, &clk->rpll_con0); + /* note: this is a meaningless exercise. The hardware lock + * detection does not work. So this just spins for some + * time and is done. NO indication of success should attach + * to this or any other spin on a con0 value. + */ + while ((readl(&clk->rpll_con0) & PLL_LOCKED) == 0) + ; + writel(CLK_DIV_CDREX0_VAL, &clk->clk_div_cdrex0); writel(CLK_DIV_CDREX1_VAL, &clk->clk_div_cdrex1); @@ -194,8 +211,3 @@ void clock_gate(void) { /* Not implemented for now. */ } - -void clock_init_dp_clock(void) -{ - /* Not implemented for now. */ -} diff --git a/src/cpu/samsung/exynos5420/cpu.c b/src/cpu/samsung/exynos5420/cpu.c index e95b438216..729e6b3707 100644 --- a/src/cpu/samsung/exynos5420/cpu.c +++ b/src/cpu/samsung/exynos5420/cpu.c @@ -26,8 +26,8 @@ #include #include #include +#include "dp.h" #include "fimd.h" -#include "dp-core.h" #include "cpu.h" #include "clk.h" #include "usb.h" @@ -138,9 +138,7 @@ static void exynos_displayport_init(device_t dev, u32 lcdbase, dcache_clean_invalidate_by_mva(lower, upper - lower); mmu_config_range(lower / MiB, (upper - lower) / MiB, DCACHE_OFF); - printk(BIOS_DEBUG, "Initializing Exynos LCD.\n"); - - lcd_ctrl_init(fb_size, &panel, (void *)lcdbase); + mmio_resource(dev, 1, lcdbase/KiB, (fb_size + KiB - 1)/KiB); } static void cpu_enable(device_t dev) diff --git a/src/cpu/samsung/exynos5420/cpu.h b/src/cpu/samsung/exynos5420/cpu.h index 1cc6e6dd68..22ef8dbf40 100644 --- a/src/cpu/samsung/exynos5420/cpu.h +++ b/src/cpu/samsung/exynos5420/cpu.h @@ -197,6 +197,7 @@ #define samsung_get_base_clock() ((struct exynos5420_clock *)EXYNOS5_CLOCK_BASE) #define samsung_get_base_ace_sfr() ((struct exynos5_ace_sfr *)EXYNOS5_ACE_SFR_BASE) #define samsung_get_base_dsim() ((struct exynos5_dsim *)EXYNOS5_MIPI_DSI1_BASE) +#define samsung_get_base_dp() ((struct exynos_dp *)EXYNOS5420_DP_BASE) #define samsung_get_base_disp_ctrl() ((struct exynos5_disp_ctrl *)EXYNOS5_DISP1_CTRL_BASE) #define samsung_get_base_fimd() ((struct exynos5_fimd *)EXYNOS5_FIMD_BASE) #define samsung_get_base_pro_id() ((struct exynos5_pro_id *)EXYNOS5_PRO_ID) diff --git a/src/cpu/samsung/exynos5420/dp-core.h b/src/cpu/samsung/exynos5420/dp-core.h deleted file mode 100644 index 62144e3a26..0000000000 --- a/src/cpu/samsung/exynos5420/dp-core.h +++ /dev/null @@ -1,260 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * Copyright (C) 2012 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Header file for Samsung DP (Display Port) interface driver. */ - -#ifndef CPU_SAMSUNG_EXYNOS5420_DP_CORE_H -#define CPU_SAMSUNG_EXYNOS5420_DP_CORE_H - -#define STREAM_ON_TIMEOUT 100 -#define PLL_LOCK_TIMEOUT 10 -#define DP_INIT_TRIES 10 -#define MAX_CR_LOOP 5 -#define MAX_EQ_LOOP 4 - -/* Link tare type */ -enum link_rate { - LINK_RATE_1_62GBPS = 0x06, - LINK_RATE_2_70GBPS = 0x0a -}; - -/* Number of lanes supported */ -enum link_lane_count { - LANE_COUNT1 = 1, - LANE_COUNT2 = 2, - LANE_COUNT4 = 4 -}; - -/* Pre emphasis level */ -enum pre_emphasis_level { - PRE_EMPHASIS_LEVEL_0, - PRE_EMPHASIS_LEVEL_1, - PRE_EMPHASIS_LEVEL_2, - PRE_EMPHASIS_LEVEL_3, -}; - -/* Type of color space */ -enum color_space { - COLOR_RGB, - COLOR_YCBCR422, - COLOR_YCBCR444 -}; - -/* Video input Bit Per Color */ -enum color_depth { - COLOR_6, - COLOR_8, - COLOR_10, - COLOR_12 -}; - -/* Type of YCbCr coefficient */ -enum color_coefficient { - COLOR_YCBCR601, - COLOR_YCBCR709 -}; - -/* Color range */ -enum dynamic_range { - VESA, - CEA -}; - -/* Status of PLL clock */ -enum pll_status { - PLL_UNLOCKED, - PLL_LOCKED -}; - -/* To choose type of m_value */ -enum clock_recovery_m_value_type { - CALCULATED_M, - REGISTER_M -}; - -struct video_info { - enum color_space color_space; - enum dynamic_range dynamic_range; - enum color_coefficient ycbcr_coeff; - enum color_depth color_depth; - - enum link_rate link_rate; - enum link_lane_count lane_count; - - char *name; - - unsigned int h_sync_polarity:1; - unsigned int v_sync_polarity:1; - unsigned int interlaced:1; -}; - -struct link_train { - u8 link_rate; - u8 lane_count; -}; - -struct s5p_dp_device { - unsigned int irq; - struct exynos5_dp *base; - struct video_info *video_info; - struct link_train link_train; -}; - -/* s5p_dp_reg.c */ - -/* - * Reset DP module - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_reset(struct s5p_dp_device *dp); -/* - * Initialize DP to recieve video stream - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_init_video(struct s5p_dp_device *dp); -/* - * Check whether PLL is locked - * - * param dp pointer to main s5p-dp structure - * return Lock status - */ -unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp); -/* - * Initialize analog functions of DP - * - * param dp pointer to main s5p-dp structure - * return 0 on success - */ -int s5p_dp_init_analog_func(struct s5p_dp_device *dp); -/* - * Initialize DP for AUX transaction - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_init_aux(struct s5p_dp_device *dp); - -/* - * Start an AUX transaction. - * - * param dp pointer to main s5p-dp structure - */ -int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp); - -/* - * Write a byte to DPCD register - * - * param dp pointer to main s5p-dp structure - * param reg_addr DPCD register to be written - * param data byte data to be written - * return write status - */ -int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char data); -/* - * Read a byte from DPCD register - * - * param dp pointer to main s5p-dp structure - * param reg_addr DPCD register to read - * param data read byte data - * return read status - */ -int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char *data); -/* - * Initialize DP video functions - * - * param dp pointer to main s5p-dp structure - */ -//void s5p_dp_init_video(struct s5p_dp_device *dp); - -/* - * Set color parameters for display - * - * param dp pointer to main s5p-dp structure - * param color_depth Video input Bit Per Color - * param color_space Colorimetric format of input video - * param dynamic_range VESA range or CEA range - * param coeff YCbCr Coefficients of input video - */ -void s5p_dp_set_video_color_format(struct s5p_dp_device *dp, - unsigned int color_depth, - unsigned int color_space, - unsigned int dynamic_range, - unsigned int coeff); -/* - * Check whether video clock is on - * - * param dp pointer to main s5p-dp structure - * return clock status - */ -int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp); -/* - * Check whether video clock is on - * - * param dp pointer to main s5p-dp structure - * param type clock_recovery_m_value_type - * param m_value to caluculate m_vid value - * param n_value to caluculate n_vid value - */ -void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, - enum clock_recovery_m_value_type type, - unsigned int m_value, - unsigned int n_value); -/* - * Set DP to video slave mode thereby enabling video master - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_enable_video_master(struct s5p_dp_device *dp); -/* - * Check whether video stream is on - * - * param dp pointer to main s5p-dp structure - * return video stream status - */ -int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp); -/* - * Configure DP in slave mode - * - * param dp pointer to main s5p-dp structure - * param video_info pointer to main video_info structure. - */ -void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp, - struct video_info *video_info); - -/* - * Wait unitl HW link training done - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp); - -/* startup and init */ -struct exynos5_fimd_panel; -void fb_init(unsigned long int fb_size, void *lcdbase, - struct exynos5_fimd_panel *pd); -int dp_controller_init(struct s5p_dp_device *dp_device); -int lcd_ctrl_init(unsigned long int fb_size, - struct exynos5_fimd_panel *panel_data, void *lcdbase); -#endif /* CPU_SAMSUNG_EXYNOS5420_DP_CORE_H */ diff --git a/src/cpu/samsung/exynos5420/dp-reg.c b/src/cpu/samsung/exynos5420/dp-reg.c deleted file mode 100644 index 1d6a6b1d55..0000000000 --- a/src/cpu/samsung/exynos5420/dp-reg.c +++ /dev/null @@ -1,503 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Samsung DP (Display port) register interface driver. */ - -#include -#include -#include -#include -#include "clk.h" -#include "cpu.h" -#include "periph.h" -#include "dp.h" -#include "fimd.h" -#include "dp-core.h" - -void s5p_dp_reset(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - writel(RESET_DP_TX, &base->dp_tx_sw_reset); - - /* Stop Video */ - clrbits_le32(&base->video_ctl_1, VIDEO_EN); - clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE); - - reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | - AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | - HDCP_FUNC_EN_N | SW_FUNC_EN_N; - writel(reg, &base->func_en_1); - - reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N | - SERDES_FIFO_FUNC_EN_N | - LS_CLK_DOMAIN_FUNC_EN_N; - writel(reg, &base->func_en_2); - - udelay(20); - - reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 | - LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0; - - writel(reg, &base->lane_map); - - writel(0x0, &base->sys_ctl_1); - writel(0x40, &base->sys_ctl_2); - writel(0x0, &base->sys_ctl_3); - writel(0x0, &base->sys_ctl_4); - - writel(0x0, &base->pkt_send_ctl); - writel(0x0, &base->dp_hdcp_ctl); - - writel(0x5e, &base->dp_hpd_deglitch_l); - writel(0x1a, &base->dp_hpd_deglitch_h); - - writel(0x10, &base->dp_debug_ctl); - - writel(0x0, &base->dp_phy_test); - - writel(0x0, &base->dp_video_fifo_thrd); - writel(0x20, &base->dp_audio_margin); - - writel(0x4, &base->m_vid_gen_filter_th); - writel(0x2, &base->m_aud_gen_filter_th); - - writel(0x00000101, &base->soc_general_ctl); - - /* Set Analog Parameters */ - writel(0x10, &base->analog_ctl_1); - writel(0x0C, &base->analog_ctl_2); - writel(0x85, &base->analog_ctl_3); - writel(0x66, &base->pll_filter_ctl_1); - writel(0x0, &base->tx_amp_tuning_ctl); - - /* Set interrupt pin assertion polarity as high */ - writel(INT_POL0 | INT_POL1, &base->int_ctl); - - /* Clear pending regisers */ - writel(0xff, &base->common_int_sta_1); - writel(0x4f, &base->common_int_sta_2); - writel(0xe0, &base->common_int_sta_3); - writel(0xe7, &base->common_int_sta_4); - writel(0x63, &base->dp_int_sta); - - /* 0:mask,1: unmask */ - writel(0x00, &base->common_int_mask_1); - writel(0x00, &base->common_int_mask_2); - writel(0x00, &base->common_int_mask_3); - writel(0x00, &base->common_int_mask_4); - writel(0x00, &base->int_sta_mask); -} - -unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp) -{ - u32 reg; - - reg = readl(&dp->base->dp_debug_ctl); - if (reg & PLL_LOCK) - return PLL_LOCKED; - else - return PLL_UNLOCKED; -} - -int s5p_dp_init_analog_func(struct s5p_dp_device *dp) -{ - u32 reg; - struct mono_time current, end; - struct exynos5_dp *base = dp->base; - - writel(0x00, &base->dp_phy_pd); - - reg = PLL_LOCK_CHG; - writel(reg, &base->common_int_sta_1); - - clrbits_le32(&base->dp_debug_ctl, (F_PLL_LOCK | PLL_LOCK_CTRL)); - - /* Power up PLL */ - if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - - clrbits_le32(&base->dp_pll_ctl, DP_PLL_PD); - - timer_monotonic_get(¤t); - end = current; - mono_time_add_msecs(&end, PLL_LOCK_TIMEOUT); - - while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - if (mono_time_after(¤t, &end)) { - printk(BIOS_ERR, "%s: PLL is not locked\n", - __func__); - return -1; - } - timer_monotonic_get(¤t); - } - } - - /* Enable Serdes FIFO function and Link symbol clock domain module */ - clrbits_le32(&base->func_en_2, (SERDES_FIFO_FUNC_EN_N | - LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N)); - return 0; -} - -void s5p_dp_init_aux(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - /* Clear inerrupts related to AUX channel */ - reg = RPLY_RECEIV | AUX_ERR; - writel(reg, &base->dp_int_sta); - - /* Disable AUX channel module */ - setbits_le32(&base->func_en_2, AUX_FUNC_EN_N); - - /* Disable AUX transaction H/W retry */ - reg = (3 & AUX_BIT_PERIOD_MASK) << AUX_BIT_PERIOD_SHIFT; - reg |= (0 & AUX_HW_RETRY_COUNT_MASK) << AUX_HW_RETRY_COUNT_SHIFT; - reg |= (AUX_HW_RETRY_INTERVAL_600_US << AUX_HW_RETRY_INTERVAL_SHIFT); - writel(reg, &base->aux_hw_retry_ctl) ; - - /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ - reg = DEFER_CTRL_EN; - reg |= (1 & DEFER_COUNT_MASK) << DEFER_COUNT_SHIFT; - writel(reg, &base->aux_ch_defer_dtl); - - /* Enable AUX channel module */ - clrbits_le32(&base->func_en_2, AUX_FUNC_EN_N); -} - -int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp) -{ - int reg; - struct exynos5_dp *base = dp->base; - - /* Enable AUX CH operation */ - setbits_le32(&base->aux_ch_ctl_2, AUX_EN); - - /* Is AUX CH command reply received? */ - reg = readl(&base->dp_int_sta); - while (!(reg & RPLY_RECEIV)) - reg = readl(&base->dp_int_sta); - - /* Clear interrupt source for AUX CH command reply */ - writel(RPLY_RECEIV, &base->dp_int_sta); - - /* Clear interrupt source for AUX CH access error */ - reg = readl(&base->dp_int_sta); - if (reg & AUX_ERR) { - printk(BIOS_ERR, "%s: AUX_ERR encountered, dp_int_sta: " - "0x%02x\n", __func__, reg); - writel(AUX_ERR, &base->dp_int_sta); - return -1; - } - - /* Check AUX CH error access status */ - reg = readl(&base->dp_int_sta); - if ((reg & AUX_STATUS_MASK) != 0) { - printk(BIOS_ERR, "AUX CH error happens: %d\n\n", - reg & AUX_STATUS_MASK); - return -1; - } - - return 0; -} - -int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char data) -{ - u32 reg; - int i; - int retval; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) { - /* Clear AUX CH data buffer */ - writel(BUF_CLR, &base->buf_data_ctl); - - /* Select DPCD device address */ - reg = reg_addr >> AUX_ADDR_7_0_SHIFT; - reg &= AUX_ADDR_7_0_MASK; - writel(reg, &base->aux_addr_7_0); - reg = reg_addr >> AUX_ADDR_15_8_SHIFT; - reg &= AUX_ADDR_15_8_MASK; - writel(reg, &base->aux_addr_15_8); - reg = reg_addr >> AUX_ADDR_19_16_SHIFT; - reg &= AUX_ADDR_19_16_MASK; - writel(reg, &base->aux_addr_19_16); - - /* Write data buffer */ - reg = (unsigned int)data; - writel(reg, &base->buf_data_0); - - /* - * Set DisplayPort transaction and write 1 byte - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; - writel(reg, &base->aux_ch_ctl_1); - - /* Start AUX transaction */ - retval = s5p_dp_start_aux_transaction(dp); - if (retval == 0) - break; - else - printk(BIOS_DEBUG, "Aux Transaction fail!\n"); - } - - return retval; -} - -int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char *data) -{ - u32 reg; - int i; - int retval; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) { - /* Clear AUX CH data buffer */ - writel(BUF_CLR, &base->buf_data_ctl); - - /* Select DPCD device address */ - reg = reg_addr >> AUX_ADDR_7_0_SHIFT; - reg &= AUX_ADDR_7_0_MASK; - writel(reg, &base->aux_addr_7_0); - reg = reg_addr >> AUX_ADDR_15_8_SHIFT; - reg &= AUX_ADDR_15_8_MASK; - writel(reg, &base->aux_addr_15_8); - reg = reg_addr >> AUX_ADDR_19_16_SHIFT; - reg &= AUX_ADDR_19_16_MASK; - writel(reg, &base->aux_addr_19_16); - - /* - * Set DisplayPort transaction and read 1 byte - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; - writel(reg, &base->aux_ch_ctl_1); - - /* Start AUX transaction */ - retval = s5p_dp_start_aux_transaction(dp); - if (retval == 0) - break; - else - printk(BIOS_DEBUG, "Aux Transaction fail!\n"); - } - - /* Read data buffer */ - if (!retval) { - reg = readl(&base->buf_data_0); - *data = (unsigned char)(reg & 0xff); - } - - return retval; -} - -void s5p_dp_init_video(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; - writel(reg, &base->common_int_sta_1); - - reg = 0x0; - writel(reg, &base->sys_ctl_1); - - reg = (4 & CHA_CRI_MASK) << CHA_CRI_SHIFT; - reg |= CHA_CTRL; - writel(reg, &base->sys_ctl_2); - - reg = 0x0; - writel(reg, &base->sys_ctl_3); -} - -void s5p_dp_set_video_color_format(struct s5p_dp_device *dp, - unsigned int color_depth, - unsigned int color_space, - unsigned int dynamic_range, - unsigned int coeff) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - /* Configure the input color depth, color space, dynamic range */ - reg = (dynamic_range << IN_D_RANGE_SHIFT) | - (color_depth << IN_BPC_SHIFT) | - (color_space << IN_COLOR_F_SHIFT); - writel(reg, &base->video_ctl_2); - - /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ - reg = readl(&base->video_ctl_3); - reg &= ~IN_YC_COEFFI_MASK; - if (coeff) - reg |= IN_YC_COEFFI_ITU709; - else - reg |= IN_YC_COEFFI_ITU601; - writel(reg, &base->video_ctl_3); -} - -int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->sys_ctl_1); - writel(reg, &base->sys_ctl_1); - - reg = readl(&base->sys_ctl_1); - - if (!(reg & DET_STA)) - return -1; - - reg = readl(&base->sys_ctl_2); - writel(reg, &base->sys_ctl_2); - - reg = readl(&base->sys_ctl_2); - - if (reg & CHA_STA) { - printk(BIOS_DEBUG, "Input stream clk is changing\n"); - return -1; - } - - return 0; -} - -void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, - enum clock_recovery_m_value_type type, - unsigned int m_value, - unsigned int n_value) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - if (type == REGISTER_M) { - setbits_le32(&base->sys_ctl_4, FIX_M_VID); - - reg = m_value >> M_VID_0_VALUE_SHIFT; - writel(reg, &base->m_vid_0); - - reg = (m_value >> M_VID_1_VALUE_SHIFT); - writel(reg, &base->m_vid_1); - - reg = (m_value >> M_VID_2_VALUE_SHIFT); - writel(reg, &base->m_vid_2); - - reg = n_value >> N_VID_0_VALUE_SHIFT; - writel(reg, &base->n_vid_0); - - reg = (n_value >> N_VID_1_VALUE_SHIFT); - writel(reg, &base->n_vid_1); - - reg = (n_value >> N_VID_2_VALUE_SHIFT); - writel(reg, &base->n_vid_2); - } else { - clrbits_le32(&base->sys_ctl_4, FIX_M_VID); - - writel(0x00, &base->n_vid_0); - writel(0x80, &base->n_vid_1); - writel(0x00, &base->n_vid_2); - } -} - -void s5p_dp_enable_video_master(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->soc_general_ctl); - reg &= ~VIDEO_MODE_MASK; - reg |= VIDEO_MODE_SLAVE_MODE; - writel(reg, &base->soc_general_ctl); -} - -int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp) -{ - u32 reg, i = 0; - struct mono_time current, end; - struct exynos5_dp *base = dp->base; - - /* Wait for 4 VSYNC_DET interrupts */ - timer_monotonic_get(¤t); - end = current; - mono_time_add_msecs(&end, STREAM_ON_TIMEOUT); - - do { - reg = readl(&base->common_int_sta_1); - if (reg & VSYNC_DET) { - i++; - writel(reg | VSYNC_DET, &base->common_int_sta_1); - } - if (i == 4) - break; - timer_monotonic_get(¤t); - } while (mono_time_before(¤t, &end)); - - if (i != 4) { - printk(BIOS_DEBUG, "s5p_dp_is_video_stream_on timeout\n"); - return -1; - } - - return 0; -} - -void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp, - struct video_info *video_info) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->func_en_1); - reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); - reg |= MASTER_VID_FUNC_EN_N; - writel(reg, &base->func_en_1); - - reg = readl(&base->video_ctl_10); - reg &= ~INTERACE_SCAN_CFG; - reg |= (video_info->interlaced << 2); - writel(reg, &base->video_ctl_10); - - reg = readl(&base->video_ctl_10); - reg &= ~VSYNC_POLARITY_CFG; - reg |= (video_info->v_sync_polarity << 1); - writel(reg, &base->video_ctl_10); - - reg = readl(&base->video_ctl_10); - reg &= ~HSYNC_POLARITY_CFG; - reg |= (video_info->h_sync_polarity << 0); - writel(reg, &base->video_ctl_10); - - reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; - writel(reg, &base->soc_general_ctl); -} - -void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->dp_hw_link_training); - while (reg & HW_TRAINING_EN) - reg = readl(&base->dp_hw_link_training); -} diff --git a/src/cpu/samsung/exynos5420/dp.c b/src/cpu/samsung/exynos5420/dp.c new file mode 100644 index 0000000000..a1c69c5b57 --- /dev/null +++ b/src/cpu/samsung/exynos5420/dp.c @@ -0,0 +1,906 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include "timer.h" +#include "cpu.h" +#include "power.h" +#include "sysreg.h" +#include + +#include "device/i2c.h" +#include "i2c.h" +#include "fimd.h" +#include "dp.h" + +/* + * Here is the rough outline of how we bring up the display: + * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD + * 2. Source determines video mode by reading DPCD receiver capability field + * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD + * 0000Dh). + * 3. Sink replies DPCD receiver capability field. + * 4. Source starts EDID read thru I2C-over-AUX. + * 5. Sink replies EDID thru I2C-over-AUX. + * 6. Source determines link configuration, such as MAX_LINK_RATE and + * MAX_LANE_COUNT. Source also determines which type of eDP Authentication + * method to use and writes DPCD link configuration field (DPCD 00100h to + * 0010Ah) including eDP configuration set (DPCD 0010Ah). + * 7. Source starts link training. Sink does clock recovery and equalization. + * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). + * 9. Sink replies DPCD link status field. If main link is not stable, Source + * repeats Step 7. + * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video + * parameters and recovers stream clock. + * 11. Source sends video data. + */ + + +static int exynos_dp_init_dp(void) +{ + int ret; + exynos_dp_reset(); + + /* SW defined function Normal operation */ + exynos_dp_enable_sw_func(DP_ENABLE); + + ret = exynos_dp_init_analog_func(); + if (ret != EXYNOS_DP_SUCCESS) + return ret; + + exynos_dp_init_hpd(); + exynos_dp_init_aux(); + + return ret; +} + +static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data) +{ + int i; + unsigned char sum = 0; + + for (i = 0; i < EDID_BLOCK_LENGTH; i++) + sum = sum + edid_data[i]; + + return sum; +} + +static unsigned int exynos_dp_read_edid(void) +{ + unsigned char edid[EDID_BLOCK_LENGTH * 2]; + unsigned int extend_block = 0; + unsigned char sum; + unsigned char test_vector; + int retval = 0; + + /* + * EDID device address is 0x50. + * However, if necessary, you must have set upper address + * into E-EDID in I2C device, 0x30. + */ + + /* Read Extension Flag, Number of 128-byte EDID extension blocks */ + if (exynos_dp_read_byte_from_i2c + (I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG, &extend_block)) + return -1; + + if (extend_block > 0) { + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + + if (retval != 0) { + printk(BIOS_ERR, "DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + printk(BIOS_ERR, "DP EDID bad checksum!\n"); + return -1; + } + /* Read additional EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_BLOCK_LENGTH, + EDID_BLOCK_LENGTH, + &edid[EDID_BLOCK_LENGTH]); + if (retval != 0) { + printk(BIOS_ERR, "DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); + if (sum != 0) { + printk(BIOS_ERR, "DP EDID bad checksum!\n"); + return -1; + } + exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, + edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + } else { + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + + if (retval != 0) { + printk(BIOS_ERR, "DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + printk(BIOS_ERR, "DP EDID bad checksum!\n"); + return -1; + } + + exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, + edid[EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + + } + + return 0; +} + +static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info) +{ + unsigned char buf[12]; + unsigned int ret; + unsigned char temp; + unsigned char retry_cnt; + unsigned char dpcd_rev[16]; + unsigned char lane_bw[16]; + unsigned char lane_cnt[16]; + + memset(dpcd_rev, 0, sizeof(dpcd_rev)); + memset(lane_bw, 0, sizeof(lane_bw)); + memset(lane_cnt, 0, sizeof(lane_cnt)); + memset(buf, 0, sizeof(buf)); + + retry_cnt = 5; + while (retry_cnt) { + /* Read DPCD 0x0000-0x000b */ + ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12, + buf); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP read_byte_from_dpcd() failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + /* */ + temp = buf[DPCD_DPCD_REV]; + if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11) + edp_info->dpcd_rev = temp; + else { + printk(BIOS_ERR, "DP Wrong DPCD Rev : %x\n", temp); + return -1; + } + temp = buf[DPCD_MAX_LINK_RATE]; + if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70) + edp_info->lane_bw = temp; + else { + printk(BIOS_ERR, "DP Wrong MAX LINK RATE : %x\n", temp); + return -1; + } + /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */ + if (edp_info->dpcd_rev == DP_DPCD_REV_11) { + temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f; + if (buf[DPCD_MAX_LANE_COUNT] & 0x80) + edp_info->dpcd_efc = 1; + else + edp_info->dpcd_efc = 0; + } else { + temp = buf[DPCD_MAX_LANE_COUNT]; + edp_info->dpcd_efc = 0; + } + + if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 || + temp == DP_LANE_CNT_4) { + edp_info->lane_cnt = temp; + } else { + printk(BIOS_ERR, "DP Wrong MAX LANE COUNT : %x\n", temp); + return -1; + } + + ret = exynos_dp_read_edid(); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP exynos_dp_read_edid() failed\n"); + return -1; + } + + return ret; +} + +static void exynos_dp_init_training(void) +{ + /* + * MACRO_RST must be applied after the PLL_LOCK to avoid + * the DP inter pair skew issue for at least 10 us + */ + exynos_dp_reset_macro(); + + /* All DP analog module power up */ + exynos_dp_set_analog_power_down(POWER_ALL, 0); +} + +static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info) +{ + unsigned char buf[5]; + unsigned int ret; + + edp_info->lt_info.lt_status = DP_LT_CR; + edp_info->lt_info.ep_loop = 0; + edp_info->lt_info.cr_loop[0] = 0; + edp_info->lt_info.cr_loop[1] = 0; + edp_info->lt_info.cr_loop[2] = 0; + edp_info->lt_info.cr_loop[3] = 0; + + /* Set sink to D0 (Sink Not Ready) mode. */ + ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE, + DPCD_SET_POWER_STATE_D0); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write_dpcd_byte failed\n"); + return ret; + } + + /* Set link rate and count as you want to establish*/ + exynos_dp_set_link_bandwidth(edp_info->lane_bw); + exynos_dp_set_lane_count(edp_info->lane_cnt); + + /* Setup RX configuration */ + buf[0] = edp_info->lane_bw; + buf[1] = edp_info->lane_cnt; + + ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2, + buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write_dpcd_byte failed\n"); + return ret; + } + + exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0, + edp_info->lane_cnt); + + /* Set training pattern 1 */ + exynos_dp_set_training_pattern(TRAINING_PTN1); + + /* Set RX training pattern */ + buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1; + + buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + + ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET, + 5, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write_dpcd_byte failed\n"); + return ret; + } + return ret; +} + +static unsigned int exynos_dp_training_pattern_dis(void) +{ + unsigned int ret; + + exynos_dp_set_training_pattern(DP_NONE); + + ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + DPCD_TRAINING_PATTERN_DISABLED); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP requst_link_traninig_req failed\n"); + return -1; + } + + return ret; +} + +static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable) +{ + unsigned char data; + unsigned int ret; + + ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET, + &data); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read_from_dpcd failed\n"); + return -1; + } + + if (enable) + data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data); + else + data = DPCD_LN_COUNT_SET(data); + + ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET, + data); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write_to_dpcd failed\n"); + return -1; + + } + + return ret; +} + +static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode) +{ + unsigned int ret; + + ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP rx_enhance_mode failed\n"); + return -1; + } + + exynos_dp_enable_enhanced_mode(enhance_mode); + + return ret; +} + +static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info, + unsigned char *status) +{ + unsigned int ret, i; + unsigned char buf[2]; + unsigned char lane_stat[DP_LANE_CNT_4] = {0,}; + const unsigned char shift_val[] = {0, 4, 0, 4}; + + ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read lane status failed\n"); + return ret; + } + + for (i = 0; i < edp_info->lane_cnt; i++) { + lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f; + if (lane_stat[0] != lane_stat[i]) { + printk(BIOS_ERR, "Wrong lane status\n"); + return -1; + } + } + + *status = lane_stat[0]; + + return ret; +} + +static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num, + unsigned char *sw, unsigned char *em) +{ + const unsigned char shift_val[] = {0, 4, 0, 4}; + unsigned int ret; + unsigned char buf; + unsigned int dpcd_addr; + + /*lane_num value is used as arry index, so this range 0 ~ 3 */ + dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2); + + ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read adjust request failed\n"); + return -1; + } + + *sw = ((buf >> shift_val[lane_num]) & 0x03); + *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2; + + return ret; +} + +static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info) +{ + int ret; + + ret = exynos_dp_training_pattern_dis(); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP training_patter_disable() failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP set_enhanced_mode() failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + return ret; +} + +static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info) +{ + int ret; + + if (edp_info->lane_bw == DP_LANE_BW_2_70) { + edp_info->lane_bw = DP_LANE_BW_1_62; + printk(BIOS_ERR, "DP Change lane bw to 1.62Gbps\n"); + edp_info->lt_info.lt_status = DP_LT_START; + ret = EXYNOS_DP_SUCCESS; + } else { + ret = exynos_dp_training_pattern_dis(); + if (ret != EXYNOS_DP_SUCCESS) + printk(BIOS_ERR, "DP training_patter_disable() failed\n"); + + ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); + if (ret != EXYNOS_DP_SUCCESS) + printk(BIOS_ERR, "DP set_enhanced_mode() failed\n"); + + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + return ret; +} + +static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info + *edp_info) +{ + unsigned int ret; + unsigned char lane_stat; + unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, }; + unsigned int i; + unsigned char adj_req_sw; + unsigned char adj_req_em; + unsigned char buf[5]; + + mdelay(1); + + ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read lane status failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + if (lane_stat & DP_LANE_STAT_CR_DONE) { + printk(BIOS_DEBUG,"DP clock Recovery training succeed\n"); + exynos_dp_set_training_pattern(TRAINING_PTN2); + + for (i = 0; i < edp_info->lane_cnt; i++) { + ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw, + &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) + || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | + MAX_PRE_EMPHASIS_REACH_3; + } + exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); + } + + buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2; + buf[1] = lt_ctl_val[0]; + buf[2] = lt_ctl_val[1]; + buf[3] = lt_ctl_val[2]; + buf[4] = lt_ctl_val[3]; + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_PATTERN_SET, 5, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write training pattern1 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } else + edp_info->lt_info.lt_status = DP_LT_ET; + } else { + for (i = 0; i < edp_info->lane_cnt; i++) { + lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i); + ret = exynos_dp_read_dpcd_adj_req(i, + &adj_req_sw, &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read adj req failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) + ret = exynos_dp_reduce_link_rate(edp_info); + + if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) == + adj_req_sw) && + (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) == + adj_req_em)) { + edp_info->lt_info.cr_loop[i]++; + if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP) + ret = exynos_dp_reduce_link_rate( + edp_info); + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | + MAX_PRE_EMPHASIS_REACH_3; + } + exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); + } + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write training pattern2 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + } + + return ret; +} + +static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info + *edp_info) +{ + unsigned int ret; + unsigned char lane_stat, adj_req_sw, adj_req_em, i; + unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,}; + unsigned char interlane_aligned = 0; + unsigned char f_bw; + unsigned char f_lane_cnt; + unsigned char sink_stat; + + mdelay(1); + + ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read lane status failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + printk(BIOS_DEBUG,"DP lane stat : %x\n", lane_stat); + + if (lane_stat & DP_LANE_STAT_CR_DONE) { + printk(BIOS_DEBUG, "DP_LANE_STAT_CR_DONE ok\n"); + ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED, + &sink_stat); + if (ret != EXYNOS_DP_SUCCESS) { + edp_info->lt_info.lt_status = DP_LT_FAIL; + printk(BIOS_ERR, "DP read DPCD_LN_ALIGN_UPDATED failed\n"); + return ret; + } + + interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE); + printk(BIOS_DEBUG, "interlane_aligned: %d\n", interlane_aligned); + printk(BIOS_DEBUG, "Check %d lanes\n", edp_info->lane_cnt); + + for (i = 0; i < edp_info->lane_cnt; i++) { + ret = exynos_dp_read_dpcd_adj_req(i, + &adj_req_sw, &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read adj req 1 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + + return ret; + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3; + lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3; + } + } + + if (((lane_stat&DP_LANE_STAT_CE_DONE) && + (lane_stat&DP_LANE_STAT_SYM_LOCK)) + && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) { + printk(BIOS_DEBUG,"DP Equalizer training succeed\n"); + + f_bw = exynos_dp_get_link_bandwidth(); + f_lane_cnt = exynos_dp_get_lane_count(); + + printk(BIOS_DEBUG,"DP final BandWidth : %x\n", f_bw); + printk(BIOS_DEBUG,"DP final Lane Count : %x\n", f_lane_cnt); + + edp_info->lt_info.lt_status = DP_LT_FINISHED; + + exynos_dp_equalizer_err_link(edp_info); + + } else { + edp_info->lt_info.ep_loop++; + + if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) { + if (edp_info->lane_bw == DP_LANE_BW_2_70) { + ret = exynos_dp_reduce_link_rate( + edp_info); + } else { + edp_info->lt_info.lt_status = + DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + } else { + for (i = 0; i < edp_info->lane_cnt; i++) + exynos_dp_set_lanex_pre_emphasis( + lt_ctl_val[i], i); + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_LANE0_SET, + 4, lt_ctl_val); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP set lt pattern failed\n"); + edp_info->lt_info.lt_status = + DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + } + } + } else if (edp_info->lane_bw == DP_LANE_BW_2_70) { + ret = exynos_dp_reduce_link_rate(edp_info); + } else { + edp_info->lt_info.lt_status = DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + + return ret; +} + +static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info) +{ + /* the C compiler is almost smart enough to know this gets set. + * But not quite. + */ + unsigned int ret = 0; + int training_finished; + + /* Turn off unnecessary lane */ + if (edp_info->lane_cnt == 1) + exynos_dp_set_analog_power_down(CH1_BLOCK, 1); + + training_finished = 0; + + edp_info->lt_info.lt_status = DP_LT_START; + + /* Process here */ + while (!training_finished) { + switch (edp_info->lt_info.lt_status) { + case DP_LT_START: + ret = exynos_dp_link_start(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP LT:link start failed\n"); + training_finished = 1; + } + break; + case DP_LT_CR: + ret = exynos_dp_process_clock_recovery(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP LT:clock recovery failed\n"); + training_finished = 1; + } + break; + case DP_LT_ET: + ret = exynos_dp_process_equalizer_training(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP LT:equalizer training failed\n"); + training_finished = 1; + } + break; + case DP_LT_FINISHED: + training_finished = 1; + break; + case DP_LT_FAIL: + printk(BIOS_ERR,"DP: %s: DP_LT_FAIL: failed\n", __func__); + training_finished = 1; + ret = -1; + } + } + + return ret; +} + +static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info) +{ + unsigned int ret; + + exynos_dp_init_training(); + + ret = exynos_dp_sw_link_training(edp_info); + if (ret != EXYNOS_DP_SUCCESS) + printk(BIOS_ERR, "DP dp_sw_link_traning() failed\n"); + + return ret; +} + +static void exynos_dp_enable_scramble(unsigned int enable) +{ + unsigned char data; + + if (enable) { + exynos_dp_enable_scrambling(DP_ENABLE); + + exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, + &data); + exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + (u8)(data & ~DPCD_SCRAMBLING_DISABLED)); + } else { + exynos_dp_enable_scrambling(DP_DISABLE); + exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, + &data); + exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + (u8)(data | DPCD_SCRAMBLING_DISABLED)); + } +} + +static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info) +{ + unsigned int ret = 0; + unsigned int retry_cnt; + + mdelay(1); + + if (edp_info->video_info.master_mode) { + printk(BIOS_ERR, + "DP does not support master mode: bailing out\n"); + return -1; + } else { + /* debug slave */ + exynos_dp_config_video_slave_mode(&edp_info->video_info); + } + + exynos_dp_set_video_color_format(&edp_info->video_info); + + ret = exynos_dp_get_pll_lock_status(); + if (ret != PLL_LOCKED) { + printk(BIOS_ERR, "DP PLL is not locked yet\n"); + return -1; + } + + if (edp_info->video_info.master_mode == 0) { + retry_cnt = 10; + while (retry_cnt) { + ret = exynos_dp_is_slave_video_stream_clock_on(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP stream_clock_on failed\n"); + return ret; + } + retry_cnt--; + mdelay(1); + } else { + printk(BIOS_DEBUG, "DP stream_clock succeeds\n"); + break; + } + } + } + + /* Set to use the register calculated M/N video */ + exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0); + + /* For video bist, Video timing must be generated by register + * not clear if we still need this. We could take it out and it + * might appear to work, then fail strangely. + */ + exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE); + + /* we need to be sure this is off. */ + exynos_dp_disable_video_bist(); + + /* Disable video mute */ + exynos_dp_enable_video_mute(DP_DISABLE); + + /* Configure video Master or Slave mode */ + exynos_dp_enable_video_master(edp_info->video_info.master_mode); + + /* Enable video */ + exynos_dp_start_video(); + + if (edp_info->video_info.master_mode == 0) { + retry_cnt = 100; + while (retry_cnt) { + ret = exynos_dp_is_video_stream_on(); + if (ret != EXYNOS_DP_SUCCESS) { + retry_cnt--; + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP Timeout of video stream\n"); + } + } else { + printk(BIOS_DEBUG, "DP video stream is on\n"); + break; + } + mdelay(5); + } + } + + return ret; +} + +int exynos_init_dp(struct edp_device_info *edp_info) +{ + unsigned int ret; + + + dp_phy_control(1); + + ret = exynos_dp_init_dp(); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP exynos_dp_init_dp() failed\n"); + return ret; + } + + ret = exynos_dp_handle_edid(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "EDP handle_edid fail\n"); + return ret; + } + + ret = exynos_dp_set_link_train(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP link training fail\n"); + return ret; + } + printk(BIOS_DEBUG, "EDP link training ok\n"); + + exynos_dp_enable_scramble(DP_ENABLE); + exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE); + exynos_dp_enable_enhanced_mode(DP_ENABLE); + + exynos_dp_set_link_bandwidth(edp_info->lane_bw); + exynos_dp_set_lane_count(edp_info->lane_cnt); + + exynos_dp_init_video(); + ret = exynos_dp_config_video(edp_info); + + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "Exynos DP init failed\n"); + return ret; + } + printk(BIOS_DEBUG, "Exynos DP init done\n"); + + return ret; +} + diff --git a/src/cpu/samsung/exynos5420/dp.h b/src/cpu/samsung/exynos5420/dp.h index 46579b3594..d260c88af1 100644 --- a/src/cpu/samsung/exynos5420/dp.h +++ b/src/cpu/samsung/exynos5420/dp.h @@ -24,474 +24,1402 @@ #define CPU_SAMSUNG_EXYNOS5420_DP_H /* DSIM register map */ -struct exynos5_dp { +struct exynos_dp { u8 res1[0x10]; - u32 dp_tx_version; - u32 dp_tx_sw_reset; - u32 func_en_1; - u32 func_en_2; - u32 video_ctl_1; - u32 video_ctl_2; - u32 video_ctl_3; - u32 video_ctl_4; - u32 clr_blue_cb; - u32 clr_green_y; - u32 clr_red_cr; - u32 video_ctl_8; + u32 tx_version; + u32 tx_sw_reset; + u32 func_en1; + u32 func_en2; + u32 video_ctl1; + u32 video_ctl2; + u32 video_ctl3; + u32 video_ctl4; + u32 color_blue_cb; + u32 color_green_y; + u32 color_red_cr; + u32 video_ctl8; u8 res2[0x4]; - u32 video_ctl_10; - u32 total_line_l; - u32 total_line_h; - u32 active_line_l; - u32 active_line_h; - u32 v_f_porch; - u32 vsync; - u32 v_b_porch; - u32 total_pixel_l; - u32 total_pixel_h; - u32 active_pixel_l; - u32 active_pixel_h; - u32 h_f_porch_l; - u32 h_f_porch_h; - u32 hsync_l; - u32 hysnc_h; - u32 h_b_porch_l; - u32 h_b_porch_h; - u32 vid_status; - u32 total_line_sta_l; - u32 total_line_sta_h; - u32 active_line_sta_l; - u32 active_line_sta_h; - u32 v_f_porch_sta; - u32 vsync_sta; - u32 v_b_porch_sta; - u32 total_pixel_sta_l; - u32 total_pixel_sta_h; - u32 active_pixel_sta_l; - u32 active_pixel_sta_h; - u32 h_f_porch_sta_l; - u32 h_f_porch_sta_h; - u32 hsync_sta_l; - u32 hsync_sta_h; - u32 h_b_porch_sta_l; - u32 h_b_porch__sta_h; + u32 video_ctl10; + u32 total_ln_cfg_l; + u32 total_ln_cfg_h; + u32 active_ln_cfg_l; + u32 active_ln_cfg_h; + u32 vfp_cfg; + u32 vsw_cfg; + u32 vbp_cfg; + u32 total_pix_cfg_l; + u32 total_pix_cfg_h; + u32 active_pix_cfg_l; + u32 active_pix_cfg_h; + u32 hfp_cfg_l; + u32 hfp_cfg_h; + u32 hsw_cfg_l; + u32 hsw_cfg_h; + u32 hbp_cfg_l; + u32 hbp_cfg_h; + u32 video_status; + u32 total_ln_sta_l; + u32 total_ln_sta_h; + u32 active_ln_sta_l; + u32 active_ln_sta_h; + + u32 vfp_sta; + u32 vsw_sta; + u32 vbp_sta; + + u32 total_pix_sta_l; + u32 total_pix_sta_h; + u32 active_pix_sta_l; + u32 active_pix_sta_h; + + u32 hfp_sta_l; + u32 hfp_sta_h; + u32 hsw_sta_l; + u32 hsw_sta_h; + u32 hbp_sta_l; + u32 hbp_sta_h; + u8 res3[0x288]; + u32 lane_map; u8 res4[0x10]; - u32 analog_ctl_1; - u32 analog_ctl_2; - u32 analog_ctl_3; - u32 pll_filter_ctl_1; - u32 tx_amp_tuning_ctl; + u32 analog_ctl1; + u32 analog_ctl2; + u32 analog_ctl3; + + u32 pll_filter_ctl1; + u32 amp_tuning_ctl; u8 res5[0xc]; + u32 aux_hw_retry_ctl; u8 res6[0x2c]; u32 int_state; - u32 common_int_sta_1; - u32 common_int_sta_2; - u32 common_int_sta_3; - u32 common_int_sta_4; + u32 common_int_sta1; + u32 common_int_sta2; + u32 common_int_sta3; + u32 common_int_sta4; u8 res7[0x8]; - u32 dp_int_sta; - u32 common_int_mask_1; - u32 common_int_mask_2; - u32 common_int_mask_3; - u32 common_int_mask_4; - u8 res8[0x08]; - u32 int_sta_mask; + + u32 int_sta; + u8 res8[0x1c]; u32 int_ctl; u8 res9[0x200]; - u32 sys_ctl_1; - u32 sys_ctl_2; - u32 sys_ctl_3; - u32 sys_ctl_4; - u32 dp_vid_ctl; + u32 sys_ctl1; + u32 sys_ctl2; + u32 sys_ctl3; + u32 sys_ctl4; + u32 vid_ctl; u8 res10[0x2c]; u32 pkt_send_ctl; - u8 res11[0x4]; - u32 dp_hdcp_ctl; - u8 res12[0x34]; + u8 res[0x4]; + u32 hdcp_ctl; + u8 res11[0x34]; u32 link_bw_set; + u32 lane_count_set; - u32 dp_training_ptn_set; - u32 ln0_link_trn_ctl; - u32 ln1_link_trn_ctl; - u32 ln2_link_trn_ctl; - u32 ln3_link_trn_ctl; - u32 dp_dn_spread; - u32 dp_hw_link_training; - u8 res13[0x1c]; - u32 dp_debug_ctl; - u32 dp_hpd_deglitch_l; - u32 dp_hpd_deglitch_h; - u8 res14[0x14]; - u32 dp_link_debug_ctl; - u8 res15[0x1c]; - u32 m_vid_0; - u32 m_vid_1; - u32 m_vid_2; - u32 n_vid_0; - u32 n_vid_1; - u32 n_vid_2; + u32 training_ptn_set; + u32 ln0_link_training_ctl; + u32 ln1_link_training_ctl; + u32 ln2_link_training_ctl; + u32 ln3_link_training_ctl; + u32 dn_spread_ctl; + u32 hw_link_training_ctl; + u8 res12[0x1c]; + + u32 debug_ctl; + u32 hpd_deglitch_l; + u32 hpd_deglitch_h; + + u8 res13[0x14]; + u32 link_debug_ctl; + + u8 res14[0x1c]; + + u32 m_vid0; + u32 m_vid1; + u32 m_vid2; + u32 n_vid0; + u32 n_vid1; + u32 n_vid2; u32 m_vid_mon; - u32 dp_pll_ctl; - u32 dp_phy_pd; - u32 dp_phy_test; + u32 pll_ctl; + u32 phy_pd; + u32 phy_test; + u8 res15[0x8]; + + u32 video_fifo_thrd; u8 res16[0x8]; - u32 dp_video_fifo_thrd; - u8 res17[0x8]; - u32 dp_audio_margin; - u32 dp_dn_spread_ctl_1; - u32 dp_dn_spread_ctl_2; - u8 res18[0x18]; - u32 dp_m_cal_ctl; + u32 audio_margin; + + u32 dn_spread_ctl1; + u32 dn_spread_ctl2; + u8 res17[0x18]; + u32 m_cal_ctl; u32 m_vid_gen_filter_th; - u8 res19[0x14]; + u8 res18[0x10]; u32 m_aud_gen_filter_th; + u8 res50[0x4]; + u32 aux_ch_sta; u32 aux_err_num; - u32 aux_ch_defer_dtl; + u32 aux_ch_defer_ctl; u32 aux_rx_comm; - u32 buf_data_ctl; - u32 aux_ch_ctl_1; + u32 buffer_data_ctl; + + u32 aux_ch_ctl1; u32 aux_addr_7_0; u32 aux_addr_15_8; u32 aux_addr_19_16; - u32 aux_ch_ctl_2; - u8 res20[0x18]; - u32 buf_data_0; - u8 res21[0x3c]; + u32 aux_ch_ctl2; + u8 res19[0x18]; + u32 buf_data0; + u8 res20[0x3c]; + u32 soc_general_ctl; + u8 res21[0x8c]; + u32 crc_con; + u32 crc_result; + u8 res22[0x8]; + + u32 common_int_mask1; + u32 common_int_mask2; + u32 common_int_mask3; + u32 common_int_mask4; + u32 int_sta_mask1; + u32 int_sta_mask2; + u32 int_sta_mask3; + u32 int_sta_mask4; + u32 int_sta_mask; + u32 crc_result2; + u32 scrambler_reset_cnt; + + u32 pn_inv; + u32 psr_config; + u32 psr_command0; + u32 psr_command1; + u32 psr_crc_mon0; + u32 psr_crc_mon1; + + u8 res24[0x30]; + u32 phy_bist_ctrl; + u8 res25[0xc]; + u32 phy_ctrl; + u8 res26[0x1c]; + u32 test_pattern_gen_en; + u32 test_pattern_gen_ctrl; }; -/* DP_TX_SW_RESET */ -#define RESET_DP_TX (1 << 0) -/* DP_FUNC_EN_1 */ -#define MASTER_VID_FUNC_EN_N (1 << 7) -#define SLAVE_VID_FUNC_EN_N (1 << 5) -#define AUD_FIFO_FUNC_EN_N (1 << 4) -#define AUD_FUNC_EN_N (1 << 3) -#define HDCP_FUNC_EN_N (1 << 2) -#define CRC_FUNC_EN_N (1 << 1) -#define SW_FUNC_EN_N (1 << 0) +/* For DP VIDEO CTL 1 */ +#define VIDEO_EN_MASK (0x01 << 7) +#define VIDEO_MUTE_MASK (0x01 << 6) -/* DP_FUNC_EN_2 */ -#define SSC_FUNC_EN_N (1 << 7) -#define AUX_FUNC_EN_N (1 << 2) -#define SERDES_FIFO_FUNC_EN_N (1 << 1) -#define LS_CLK_DOMAIN_FUNC_EN_N (1 << 0) +/* For DP VIDEO CTL 4 */ +#define VIDEO_BIST_MASK (0x1 << 3) -/* DP_VIDEO_CTL_1 */ -#define VIDEO_EN (1 << 7) -#define HDCP_VIDEO_MUTE (1 << 6) +/* EXYNOS_DP_ANALOG_CTL_1 */ +#define SEL_BG_NEW_BANDGAP (0x0 << 6) +#define SEL_BG_INTERNAL_RESISTOR (0x1 << 6) +#define TX_TERMINAL_CTRL_73_OHM (0x0 << 4) +#define TX_TERMINAL_CTRL_61_OHM (0x1 << 4) +#define TX_TERMINAL_CTRL_50_OHM (0x2 << 4) +#define TX_TERMINAL_CTRL_45_OHM (0x3 << 4) +#define SWING_A_30PER_G_INCREASE (0x1 << 3) +#define SWING_A_30PER_G_NORMAL (0x0 << 3) -/* DP_VIDEO_CTL_1 */ -#define IN_D_RANGE_MASK (1 << 7) -#define IN_D_RANGE_SHIFT (7) -#define IN_D_RANGE_CEA (1 << 7) -#define IN_D_RANGE_VESA (0 << 7) -#define IN_BPC_MASK (7 << 4) -#define IN_BPC_SHIFT (4) -#define IN_BPC_12_BITS (3 << 4) -#define IN_BPC_10_BITS (2 << 4) -#define IN_BPC_8_BITS (1 << 4) -#define IN_BPC_6_BITS (0 << 4) -#define IN_COLOR_F_MASK (3 << 0) -#define IN_COLOR_F_SHIFT (0) -#define IN_COLOR_F_YCBCR444 (2 << 0) -#define IN_COLOR_F_YCBCR422 (1 << 0) -#define IN_COLOR_F_RGB (0 << 0) +/* EXYNOS_DP_ANALOG_CTL_2 */ +#define CPREG_BLEED (0x1 << 4) +#define SEL_24M (0x1 << 3) +#define TX_DVDD_BIT_1_0000V (0x3 << 0) +#define TX_DVDD_BIT_1_0625V (0x4 << 0) +#define TX_DVDD_BIT_1_1250V (0x5 << 0) -/* DP_VIDEO_CTL_3 */ -#define IN_YC_COEFFI_MASK (1 << 7) -#define IN_YC_COEFFI_SHIFT (7) -#define IN_YC_COEFFI_ITU709 (1 << 7) -#define IN_YC_COEFFI_ITU601 (0 << 7) -#define VID_CHK_UPDATE_TYPE_MASK (1 << 4) -#define VID_CHK_UPDATE_TYPE_SHIFT (4) -#define VID_CHK_UPDATE_TYPE_1 (1 << 4) -#define VID_CHK_UPDATE_TYPE_0 (0 << 4) +/* EXYNOS_DP_ANALOG_CTL_3 */ +#define DRIVE_DVDD_BIT_1_0000V (0x3 << 5) +#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5) +#define DRIVE_DVDD_BIT_1_1250V (0x5 << 5) +#define SEL_CURRENT_DEFAULT (0x0 << 3) +#define VCO_BIT_000_MICRO (0x0 << 0) +#define VCO_BIT_200_MICRO (0x1 << 0) +#define VCO_BIT_300_MICRO (0x2 << 0) +#define VCO_BIT_400_MICRO (0x3 << 0) +#define VCO_BIT_500_MICRO (0x4 << 0) +#define VCO_BIT_600_MICRO (0x5 << 0) +#define VCO_BIT_700_MICRO (0x6 << 0) +#define VCO_BIT_900_MICRO (0x7 << 0) -/* DP_VIDEO_CTL_10 */ -#define FORMAT_SEL (1 << 4) -#define INTERACE_SCAN_CFG (1 << 2) -#define VSYNC_POLARITY_CFG (1 << 1) -#define HSYNC_POLARITY_CFG (1 << 0) +/* EXYNOS_DP_PLL_FILTER_CTL_1 */ +#define PD_RING_OSC (0x1 << 6) +#define AUX_TERMINAL_CTRL_52_OHM (0x3 << 4) +#define AUX_TERMINAL_CTRL_69_OHM (0x2 << 4) +#define AUX_TERMINAL_CTRL_102_OHM (0x1 << 4) +#define AUX_TERMINAL_CTRL_200_OHM (0x0 << 4) +#define TX_CUR1_1X (0x0 << 2) +#define TX_CUR1_2X (0x1 << 2) +#define TX_CUR1_3X (0x2 << 2) +#define TX_CUR_1_MA (0x0 << 0) +#define TX_CUR_2_MA (0x1 << 0) +#define TX_CUR_3_MA (0x2 << 0) +#define TX_CUR_4_MA (0x3 << 0) -/* DP_LANE_MAP */ -#define LANE3_MAP_LOGIC_LANE_0 (0 << 6) -#define LANE3_MAP_LOGIC_LANE_1 (1 << 6) -#define LANE3_MAP_LOGIC_LANE_2 (2 << 6) -#define LANE3_MAP_LOGIC_LANE_3 (3 << 6) -#define LANE2_MAP_LOGIC_LANE_0 (0 << 4) -#define LANE2_MAP_LOGIC_LANE_1 (1 << 4) -#define LANE2_MAP_LOGIC_LANE_2 (2 << 4) -#define LANE2_MAP_LOGIC_LANE_3 (3 << 4) -#define LANE1_MAP_LOGIC_LANE_0 (0 << 2) -#define LANE1_MAP_LOGIC_LANE_1 (1 << 2) -#define LANE1_MAP_LOGIC_LANE_2 (2 << 2) -#define LANE1_MAP_LOGIC_LANE_3 (3 << 2) -#define LANE0_MAP_LOGIC_LANE_0 (0 << 0) -#define LANE0_MAP_LOGIC_LANE_1 (1 << 0) -#define LANE0_MAP_LOGIC_LANE_2 (2 << 0) -#define LANE0_MAP_LOGIC_LANE_3 (3 << 0) +/* EXYNOS_DP_PLL_FILTER_CTL_2 */ +#define CH3_AMP_0_MV (0x3 << 12) +#define CH2_AMP_0_MV (0x3 << 8) +#define CH1_AMP_0_MV (0x3 << 4) +#define CH0_AMP_0_MV (0x3 << 0) -/* DP_AUX_HW_RETRY_CTL */ -#define AUX_BIT_PERIOD_SHIFT 8 -#define AUX_BIT_PERIOD_MASK 7 +/* EXYNOS_DP_PLL_CTL */ +#define DP_PLL_PD (0x1 << 7) +#define DP_PLL_RESET (0x1 << 6) +#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4) +#define DP_PLL_REF_BIT_1_1250V (0x5 << 0) +#define DP_PLL_REF_BIT_1_2500V (0x7 << 0) -#define AUX_HW_RETRY_INTERVAL_SHIFT 3 -#define AUX_HW_RETRY_INTERVAL_600_US 0 -#define AUX_HW_RETRY_INTERVAL_800_US 1 -#define AUX_HW_RETRY_INTERVAL_1000_US 2 -#define AUX_HW_RETRY_INTERVAL_1800_US 3 -#define AUX_HW_RETRY_COUNT_SHIFT 0 -#define AUX_HW_RETRY_COUNT_MASK 7 +/* EXYNOS_DP_INT_CTL */ +#define SOFT_INT_CTRL (0x1 << 2) +#define INT_POL (0x1 << 0) -/* DP_COMMON_INT_STA_1 */ -#define VSYNC_DET (1 << 7) -#define PLL_LOCK_CHG (1 << 6) -#define SPDIF_ERR (1 << 5) -#define SPDIF_UNSTBL (1 << 4) -#define VID_FORMAT_CHG (1 << 3) -#define AUD_CLK_CHG (1 << 2) -#define VID_CLK_CHG (1 << 1) -#define SW_INT (1 << 0) +/* DP TX SW RESET */ +#define RESET_DP_TX (0x01 << 0) -/* DP_COMMON_INT_STA_2 */ -#define ENC_EN_CHG (1 << 6) -#define HW_BKSV_RDY (1 << 3) -#define HW_SHA_DONE (1 << 2) -#define HW_AUTH_STATE_CHG (1 << 1) -#define HW_AUTH_DONE (1 << 0) +/* DP FUNC_EN_1 */ +#define MASTER_VID_FUNC_EN_N (0x1 << 7) +#define SLAVE_VID_FUNC_EN_N (0x1 << 5) +#define AUD_FIFO_FUNC_EN_N (0x1 << 4) +#define AUD_FUNC_EN_N (0x1 << 3) +#define HDCP_FUNC_EN_N (0x1 << 2) +#define CRC_FUNC_EN_N (0x1 << 1) +#define SW_FUNC_EN_N (0x1 << 0) -/* DP_COMMON_INT_STA_3 */ -#define AFIFO_UNDER (1 << 7) -#define AFIFO_OVER (1 << 6) -#define R0_CHK_FLAG (1 << 5) +/* DP FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) -/* DP_COMMON_INT_STA_4 */ -#define PSR_ACTIVE (1 << 7) -#define PSR_INACTIVE (1 << 6) -#define SPDIF_BI_PHASE_ERR (1 << 5) -#define HOTPLUG_CHG (1 << 2) -#define HPD_LOST (1 << 1) -#define PLUG (1 << 0) +/* EXYNOS_DP_PHY_PD */ +#define PHY_PD (0x1 << 5) +#define AUX_PD (0x1 << 4) +#define CH3_PD (0x1 << 3) +#define CH2_PD (0x1 << 2) +#define CH1_PD (0x1 << 1) +#define CH0_PD (0x1 << 0) -/* DP_INT_STA */ -#define INT_HPD (1 << 6) -#define HW_TRAINING_FINISH (1 << 5) -#define RPLY_RECEIV (1 << 1) -#define AUX_ERR (1 << 0) +/* EXYNOS_DP_COMMON_INT_STA_1 */ +#define VSYNC_DET (0x1 << 7) +#define PLL_LOCK_CHG (0x1 << 6) +#define SPDIF_ERR (0x1 << 5) +#define SPDIF_UNSTBL (0x1 << 4) +#define VID_FORMAT_CHG (0x1 << 3) +#define AUD_CLK_CHG (0x1 << 2) +#define VID_CLK_CHG (0x1 << 1) +#define SW_INT (0x1 << 0) -/* DP_INT_CTL */ -#define INT_POL0 (1 << 0) -#define INT_POL1 (1 << 1) -#define SOFT_INT_CTRL (1 << 2) +/* EXYNOS_DP_DEBUG_CTL */ +#define PLL_LOCK (0x1 << 4) +#define F_PLL_LOCK (0x1 << 3) +#define PLL_LOCK_CTRL (0x1 << 2) -/* DP_SYS_CTL_1 */ -#define DET_STA (1 << 2) -#define FORCE_DET (1 << 1) -#define DET_CTRL (1 << 0) +/* EXYNOS_DP_FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) -/* DP_SYS_CTL_2 */ -#define CHA_CRI_SHIFT 4 -#define CHA_CRI_MASK 0xf -#define CHA_STA (1 << 2) -#define FORCE_CHA (1 << 1) -#define CHA_CTRL (1 << 0) +/* EXYNOS_DP_COMMON_INT_STA_4 */ +#define PSR_ACTIVE (0x1 << 7) +#define PSR_INACTIVE (0x1 << 6) +#define SPDIF_BI_PHASE_ERR (0x1 << 5) +#define HOTPLUG_CHG (0x1 << 2) +#define HPD_LOST (0x1 << 1) +#define PLUG (0x1 << 0) -/* DP_SYS_CTL_3 */ -#define HPD_STATUS (1 << 6) -#define F_HPD (1 << 5) -#define HPD_CTRL (1 << 4) -#define HDCP_RDY (1 << 3) -#define STRM_VALID (1 << 2) -#define F_VALID (1 << 1) -#define VALID_CTRL (1 << 0) +/* EXYNOS_DP_INT_STA */ +#define INT_HPD (0x1 << 6) +#define HW_TRAINING_FINISH (0x1 << 5) +#define RPLY_RECEIV (0x1 << 1) +#define AUX_ERR (0x1 << 0) -/* DP_SYS_CTL_4 */ -#define FIX_M_AUD (1 << 4) -#define ENHANCED (1 << 3) -#define FIX_M_VID (1 << 2) -#define M_VID_UPDATE_CTRL (3 << 0) +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) -/* DP_TRAINING_PTN_SET */ -#define SCRAMBLER_TYPE (1 << 9) -#define HW_LINK_TRAINING_PATTERN (1 << 8) -#define SCRAMBLING_DISABLE (1 << 5) -#define SCRAMBLING_ENABLE (0 << 5) -#define LINK_QUAL_PATTERN_SET_MASK (3 << 2) -#define LINK_QUAL_PATTERN_SET_PRBS7 (3 << 2) -#define LINK_QUAL_PATTERN_SET_D10_2 (1 << 2) -#define LINK_QUAL_PATTERN_SET_DISABLE (0 << 2) -#define SW_TRAINING_PATTERN_SET_MASK (3 << 0) -#define SW_TRAINING_PATTERN_SET_PTN2 (2 << 0) -#define SW_TRAINING_PATTERN_SET_PTN1 (1 << 0) -#define SW_TRAINING_PATTERN_SET_NORMAL (0 << 0) +/* EXYNOS_DP_AUX_HW_RETRY_CTL */ +#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8) +#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3) +#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3) +#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3) +#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3) +#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3) +#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0) -/* DP_LN0_LINK_TRAINING_CTL */ -#define PRE_EMPHASIS_SET_SHIFT (3) +/* EXYNOS_DP_AUX_CH_DEFER_CTL */ +#define DEFER_CTRL_EN (0x1 << 7) +#define DEFER_COUNT(x) (((x) & 0x7f) << 0) -/* DP_DEBUG_CTL */ -#define PLL_LOCK (1 << 4) -#define F_PLL_LOCK (1 << 3) -#define PLL_LOCK_CTRL (1 << 2) -#define PN_INV (1 << 0) +#define COMMON_INT_MASK_1 (0) +#define COMMON_INT_MASK_2 (0) +#define COMMON_INT_MASK_3 (0) +#define COMMON_INT_MASK_4 (0) +#define INT_STA_MASK (0) -/* DP_M_VID */ -#define M_VID_0_VALUE_SHIFT 0 -#define M_VID_1_VALUE_SHIFT 8 -#define M_VID_2_VALUE_SHIFT 16 +/* EXYNOS_DP_BUFFER_DATA_CTL */ +#define BUF_CLR (0x1 << 7) +#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0) -/* DP_M_VID */ -#define N_VID_0_VALUE_SHIFT 0 -#define N_VID_1_VALUE_SHIFT 8 -#define N_VID_2_VALUE_SHIFT 16 +/* EXYNOS_DP_AUX_ADDR_7_0 */ +#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff) -/* DP_PLL_CTL */ -#define DP_PLL_PD (1 << 7) -#define DP_PLL_RESET (1 << 6) -#define DP_PLL_LOOP_BIT_DEFAULT (1 << 4) -#define DP_PLL_REF_BIT_1_1250V (5 << 0) -#define DP_PLL_REF_BIT_1_2500V (7 << 0) +/* EXYNOS_DP_AUX_ADDR_15_8 */ +#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff) -/* DP_PHY_PD */ -#define DP_PHY_PD (1 << 5) -#define AUX_PD (1 << 4) -#define CH3_PD (1 << 3) -#define CH2_PD (1 << 2) -#define CH1_PD (1 << 1) -#define CH0_PD (1 << 0) +/* EXYNOS_DP_AUX_ADDR_19_16 */ +#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f) -/* DP_PHY_TEST */ -#define MACRO_RST (1 << 5) -#define CH1_TEST (1 << 1) -#define CH0_TEST (1 << 0) +/* EXYNOS_DP_AUX_CH_CTL_1 */ +#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4) +#define AUX_TX_COMM_MASK (0xf << 0) +#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3) +#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3) +#define AUX_TX_COMM_MOT (0x1 << 2) +#define AUX_TX_COMM_WRITE (0x0 << 0) +#define AUX_TX_COMM_READ (0x1 << 0) -/* DP_AUX_CH_STA */ -#define AUX_BUSY (1 << 4) +/* EXYNOS_DP_AUX_CH_CTL_2 */ +#define ADDR_ONLY (0x1 << 1) +#define AUX_EN (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_STA */ +#define AUX_BUSY (0x1 << 4) #define AUX_STATUS_MASK (0xf << 0) -/* DP_AUX_CH_DEFER_CTL */ -#define DEFER_CTRL_EN (1 << 7) -#define DEFER_COUNT_SHIFT 0 -#define DEFER_COUNT_MASK 0x7f +/* EXYNOS_DP_AUX_RX_COMM */ +#define AUX_RX_COMM_I2C_DEFER (0x2 << 2) +#define AUX_RX_COMM_AUX_DEFER (0x2 << 0) -/* DP_AUX_RX_COMM */ -#define AUX_RX_COMM_I2C_DEFER (2 << 2) -#define AUX_RX_COMM_AUX_DEFER (2 << 0) +/* EXYNOS_DP_PHY_TEST */ +#define MACRO_RST (0x1 << 5) +#define CH1_TEST (0x1 << 1) +#define CH0_TEST (0x1 << 0) -/* DP_BUFFER_DATA_CTL */ -#define BUF_CLR (1 << 7) +/* EXYNOS_DP_TRAINING_PTN_SET */ +#define SCRAMBLER_TYPE (0x1 << 9) +#define HW_LINK_TRAINING_PATTERN (0x1 << 8) +#define SCRAMBLING_DISABLE (0x1 << 5) +#define SCRAMBLING_ENABLE (0x0 << 5) +#define LINK_QUAL_PATTERN_SET_MASK (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2) +#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2) +#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0) +#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0) +#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0) +#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0) -/* Maximum number of tries for Aux Transaction */ -#define MAX_AUX_RETRY_COUNT 10 +/* EXYNOS_DP_TOTAL_LINE_CFG */ +#define TOTAL_LINE_CFG_L(x) ((x) & 0xff) +#define TOTAL_LINE_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_LINE_CFG_L(x) ((x) & 0xff) +#define ACTIVE_LINE_CFG_H(x) (((x) >> 8) & 0xff) +#define TOTAL_PIXEL_CFG_L(x) ((x) & 0xff) +#define TOTAL_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_PIXEL_CFG_L(x) ((x) & 0xff) +#define ACTIVE_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) -/* DP_AUX_CH_CTL_1 */ -#define AUX_LENGTH_SHIFT 4 -#define AUX_LENGTH_MASK 0xf +#define H_F_PORCH_CFG_L(x) ((x) & 0xff) +#define H_F_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_SYNC_PORCH_CFG_L(x) ((x) & 0xff) +#define H_SYNC_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_B_PORCH_CFG_L(x) ((x) & 0xff) +#define H_B_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) -#define AUX_TX_COMM_MASK (0xf << 0) -#define AUX_TX_COMM_DP_TRANSACTION (1 << 3) -#define AUX_TX_COMM_I2C_TRANSACTION (0 << 3) -#define AUX_TX_COMM_MOT (1 << 2) -#define AUX_TX_COMM_WRITE (0 << 0) -#define AUX_TX_COMM_READ (1 << 0) +/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_0 (0x1 << 5) +#define PRE_EMPHASIS_SET_0_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_0_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_0_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_0_SHIFT (3) +#define PRE_EMPHASIS_SET_0_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_0 (0x1 << 2) +#define DRIVE_CURRENT_SET_0_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_0_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_0_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_0_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_0 (0x0 << 0) -/* DP_AUX_ADDR_7_0 */ -#define AUX_ADDR_7_0_SHIFT 0 -#define AUX_ADDR_7_0_MASK 0xff +/* EXYNOS_DP_LN1_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_1 (0x1 << 5) +#define PRE_EMPHASIS_SET_1_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_1_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_1_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_1_SHIFT (3) +#define PRE_EMPHASIS_SET_1_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_1 (0x1 << 2) +#define DRIVE_CURRENT_SET_1_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_1_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_1_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_1_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_0 (0x0 << 0) -/* DP_AUX_ADDR_15_8 */ -#define AUX_ADDR_15_8_SHIFT 8 -#define AUX_ADDR_15_8_MASK 0xff +/* EXYNOS_DP_LN2_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_2 (0x1 << 5) +#define PRE_EMPHASIS_SET_2_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_2_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_2_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_2_SHIFT (3) +#define PRE_EMPHASIS_SET_2_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_2 (0x1 << 2) +#define DRIVE_CURRENT_SET_2_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_2_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_2_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_2_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_0 (0x0 << 0) -/* DP_AUX_ADDR_19_16 */ -#define AUX_ADDR_19_16_SHIFT 16 -#define AUX_ADDR_19_16_MASK 0x0f +/* EXYNOS_DP_LN3_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_3 (0x1 << 5) +#define PRE_EMPHASIS_SET_3_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_3_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_3_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_3_SHIFT (3) +#define PRE_EMPHASIS_SET_3_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_3 (0x1 << 2) +#define DRIVE_CURRENT_SET_3_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_3_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_3_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_3_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_0 (0x0 << 0) -/* DP_AUX_CH_CTL_2 */ -#define ADDR_ONLY (1 << 1) -#define AUX_EN (1 << 0) +/* EXYNOS_DP_VIDEO_CTL_10 */ +#define FORMAT_SEL (0x1 << 4) +#define INTERACE_SCAN_CFG (0x1 << 2) +#define INTERACE_SCAN_CFG_SHIFT (2) +#define VSYNC_POLARITY_CFG (0x1 << 1) +#define V_S_POLARITY_CFG_SHIFT (1) +#define HSYNC_POLARITY_CFG (0x1 << 0) +#define H_S_POLARITY_CFG_SHIFT (0) -/* DP_SOC_GENERAL_CTL */ -#define AUDIO_MODE_SPDIF_MODE (1 << 8) -#define AUDIO_MODE_MASTER_MODE (0 << 8) -#define MASTER_VIDEO_INTERLACE_EN (1 << 4) -#define VIDEO_MASTER_CLK_SEL (1 << 2) -#define VIDEO_MASTER_MODE_EN (1 << 1) -#define VIDEO_MODE_MASK (1 << 0) -#define VIDEO_MODE_SLAVE_MODE (1 << 0) -#define VIDEO_MODE_MASTER_MODE (0 << 0) +/* EXYNOS_DP_SOC_GENERAL_CTL */ +#define AUDIO_MODE_SPDIF_MODE (0x1 << 8) +#define AUDIO_MODE_MASTER_MODE (0x0 << 8) +#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4) +#define VIDEO_MASTER_CLK_SEL (0x1 << 2) +#define VIDEO_MASTER_MODE_EN (0x1 << 1) +#define VIDEO_MODE_MASK (0x1 << 0) +#define VIDEO_MODE_SLAVE_MODE (0x1 << 0) +#define VIDEO_MODE_MASTER_MODE (0x0 << 0) -#define HW_TRAINING_ERROR_CODE (7<<4) -#define HW_TRAINING_EN (1<<0) +/* EXYNOS_DP_VIDEO_CTL_1 */ +#define VIDEO_EN (0x1 << 7) +#define HDCP_VIDEO_MUTE (0x1 << 6) -/* I2C EDID Chip ID, Slave Address */ -#define I2C_EDID_DEVICE_ADDR 0x50 -#define I2C_E_EDID_DEVICE_ADDR 0x30 +/* EXYNOS_DP_VIDEO_CTL_2 */ +#define IN_D_RANGE_MASK (0x1 << 7) +#define IN_D_RANGE_SHIFT (7) +#define IN_D_RANGE_CEA (0x1 << 7) +#define IN_D_RANGE_VESA (0x0 << 7) +#define IN_BPC_MASK (0x7 << 4) +#define IN_BPC_SHIFT (4) +#define IN_BPC_12_BITS (0x3 << 4) +#define IN_BPC_10_BITS (0x2 << 4) +#define IN_BPC_8_BITS (0x1 << 4) +#define IN_BPC_6_BITS (0x0 << 4) +#define IN_COLOR_F_MASK (0x3 << 0) +#define IN_COLOR_F_SHIFT (0) +#define IN_COLOR_F_YCBCR444 (0x2 << 0) +#define IN_COLOR_F_YCBCR422 (0x1 << 0) +#define IN_COLOR_F_RGB (0x0 << 0) -#define EDID_BLOCK_LENGTH 0x80 -#define EDID_HEADER_PATTERN 0x00 -#define EDID_EXTENSION_FLAG 0x7e -#define EDID_CHECKSUM 0x7f +/* EXYNOS_DP_VIDEO_CTL_3 */ +#define IN_YC_COEFFI_MASK (0x1 << 7) +#define IN_YC_COEFFI_SHIFT (7) +#define IN_YC_COEFFI_ITU709 (0x1 << 7) +#define IN_YC_COEFFI_ITU601 (0x0 << 7) +#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_SHIFT (4) +#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4) + +/* EXYNOS_DP_TEST_PATTERN_GEN_EN */ +#define TEST_PATTERN_GEN_EN (0x1 << 0) +#define TEST_PATTERN_GEN_DIS (0x0 << 0) + +/* EXYNOS_DP_TEST_PATTERN_GEN_CTRL */ +#define TEST_PATTERN_MODE_COLOR_SQUARE (0x3 << 0) +#define TEST_PATTERN_MODE_BALCK_WHITE_V_LINES (0x2 << 0) +#define TEST_PATTERN_MODE_COLOR_RAMP (0x1 << 0) + +/* EXYNOS_DP_VIDEO_CTL_4 */ +#define BIST_EN (0x1 << 3) +#define BIST_WIDTH_MASK (0x1 << 2) +#define BIST_WIDTH_BAR_32_PIXEL (0x0 << 2) +#define BIST_WIDTH_BAR_64_PIXEL (0x1 << 2) +#define BIST_TYPE_MASK (0x3 << 0) +#define BIST_TYPE_COLOR_BAR (0x0 << 0) +#define BIST_TYPE_WHITE_GRAY_BLACK_BAR (0x1 << 0) +#define BIST_TYPE_MOBILE_WHITE_BAR (0x2 << 0) + +/* EXYNOS_DP_SYS_CTL_1 */ +#define DET_STA (0x1 << 2) +#define FORCE_DET (0x1 << 1) +#define DET_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_2 */ +#define CHA_CRI(x) (((x) & 0xf) << 4) +#define CHA_STA (0x1 << 2) +#define FORCE_CHA (0x1 << 1) +#define CHA_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_4 */ +#define FIX_M_AUD (0x1 << 4) +#define ENHANCED (0x1 << 3) +#define FIX_M_VID (0x1 << 2) +#define M_VID_UPDATE_CTRL (0x3 << 0) + +/* EXYNOS_M_VID_X */ +#define M_VID0_CFG(x) ((x) & 0xff) +#define M_VID1_CFG(x) (((x) >> 8) & 0xff) +#define M_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* EXYNOS_M_VID_X */ +#define N_VID0_CFG(x) ((x) & 0xff) +#define N_VID1_CFG(x) (((x) >> 8) & 0xff) +#define N_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* DPCD_TRAINING_PATTERN_SET */ +#define DPCD_SCRAMBLING_DISABLED (0x1 << 5) +#define DPCD_SCRAMBLING_ENABLED (0x0 << 5) +#define DPCD_TRAINING_PATTERN_2 (0x2 << 0) +#define DPCD_TRAINING_PATTERN_1 (0x1 << 0) +#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0) /* Definition for DPCD Register */ -#define DPCD_ADDR_DPCD_REV 0x0000 -#define DPCD_ADDR_MAX_LINK_RATE 0x0001 -#define DPCD_ADDR_MAX_LANE_COUNT 0x0002 -#define DPCD_ADDR_LINK_BW_SET 0x0100 -#define DPCD_ADDR_LANE_COUNT_SET 0x0101 -#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102 -#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103 -#define DPCD_ADDR_LANE0_1_STATUS 0x0202 -#define DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED 0x0204 -#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206 -#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207 -#define DPCD_ADDR_TEST_REQUEST 0x0218 -#define DPCD_ADDR_TEST_RESPONSE 0x0260 -#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261 -#define DPCD_ADDR_SINK_POWER_STATE 0x0600 +#define DPCD_DPCD_REV (0x0000) +#define DPCD_MAX_LINK_RATE (0x0001) +#define DPCD_MAX_LANE_COUNT (0x0002) +#define DPCD_LINK_BW_SET (0x0100) +#define DPCD_LANE_COUNT_SET (0x0101) +#define DPCD_TRAINING_PATTERN_SET (0x0102) +#define DPCD_TRAINING_LANE0_SET (0x0103) +#define DPCD_LANE0_1_STATUS (0x0202) +#define DPCD_LN_ALIGN_UPDATED (0x0204) +#define DPCD_ADJUST_REQUEST_LANE0_1 (0x0206) +#define DPCD_ADJUST_REQUEST_LANE2_3 (0x0207) +#define DPCD_TEST_REQUEST (0x0218) +#define DPCD_TEST_RESPONSE (0x0260) +#define DPCD_TEST_EDID_CHECKSUM (0x0261) +#define DPCD_SINK_POWER_STATE (0x0600) -/* DPCD_ADDR_MAX_LANE_COUNT */ -#define DPCD_MAX_LANE_COUNT_MASK 0x1f +/* DPCD_TEST_REQUEST */ +#define DPCD_TEST_EDID_READ (0x1 << 2) -/* DPCD_ADDR_LANE_COUNT_SET */ -#define DPCD_ENHANCED_FRAME_EN (1 << 7) -#define DPCD_LANE_COUNT_SET_MASK 0x1f +/* DPCD_TEST_RESPONSE */ +#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2) -/* DPCD_ADDR_TRAINING_PATTERN_SET */ -#define DPCD_SCRAMBLING_DISABLED (1 << 5) -#define DPCD_SCRAMBLING_ENABLED (0 << 5) -#define DPCD_TRAINING_PATTERN_2 (2 << 0) -#define DPCD_TRAINING_PATTERN_1 (1 << 0) -#define DPCD_TRAINING_PATTERN_DISABLED (0 << 0) +/* DPCD_SINK_POWER_STATE */ +#define DPCD_SET_POWER_STATE_D0 (0x1 << 0) +#define DPCD_SET_POWER_STATE_D4 (0x2 << 0) -/* DPCD_ADDR_LANE0_1_STATUS */ -#define DPCD_LANE_SYMBOL_LOCKED (1 << 2) -#define DPCD_LANE_CHANNEL_EQ_DONE (1 << 1) -#define DPCD_LANE_CR_DONE (1 << 0) -#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE | \ - DPCD_LANE_CHANNEL_EQ_DONE | \ - DPCD_LANE_SYMBOL_LOCKED) +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR (0x50) +#define I2C_E_EDID_DEVICE_ADDR (0x30) +#define EDID_BLOCK_LENGTH (0x80) +#define EDID_HEADER_PATTERN (0x00) +#define EDID_EXTENSION_FLAG (0x7e) +#define EDID_CHECKSUM (0x7f) -/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */ -#define DPCD_LINK_STATUS_UPDATED (1 << 7) -#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) -#define DPCD_INTERLANE_ALIGN_DONE (1 << 0) +/* DPCD_LANE0_1_STATUS */ +#define DPCD_LANE1_SYMBOL_LOCKED (0x1 << 6) +#define DPCD_LANE1_CHANNEL_EQ_DONE (0x1 << 5) +#define DPCD_LANE1_CR_DONE (0x1 << 4) +#define DPCD_LANE0_SYMBOL_LOCKED (0x1 << 2) +#define DPCD_LANE0_CHANNEL_EQ_DONE (0x1 << 1) +#define DPCD_LANE0_CR_DONE (0x1 << 0) -/* DPCD_ADDR_TEST_REQUEST */ -#define DPCD_TEST_EDID_READ (1 << 2) +/* DPCD_ADJUST_REQUEST_LANE0_1 */ +#define DPCD_PRE_EMPHASIS_LANE1_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE1_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE0_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE0_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_0 (0x0 << 0) -/* DPCD_ADDR_TEST_RESPONSE */ -#define DPCD_TEST_EDID_CHECKSUM_WRITE (1 << 2) +/* DPCD_ADJUST_REQUEST_LANE2_3 */ +#define DPCD_PRE_EMPHASIS_LANE2_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE2_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE3_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE3_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_0 (0x0 << 0) -/* DPCD_ADDR_SINK_POWER_STATE */ -#define DPCD_SET_POWER_STATE_D0 (1 << 0) -#define DPCD_SET_POWER_STATE_D4 (2 << 0) +/* DPCD_LANE_COUNT_SET */ +#define DPCD_ENHANCED_FRAME_EN (0x1 << 7) +#define DPCD_LN_COUNT_SET(x) ((x) & 0x1f) -/* Allow DP Gating clock and set FIMD source to 267 Mhz for DP */ -void clock_init_dp_clock(void); +/* DPCD_LANE_ALIGN__STATUS_UPDATED */ +#define DPCD_LINK_STATUS_UPDATED (0x1 << 7) +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6) +#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0) + +/* DPCD_TRAINING_LANE0_SET */ +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_3 (0x3 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_2 (0x2 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_1 (0x1 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 (0x0 << 3) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0 (0x0 << 0) + +#define DPCD_REQ_ADJ_SWING (0x00) +#define DPCD_REQ_ADJ_EMPHASIS (0x01) + +#define DP_LANE_STAT_CR_DONE (0x01 << 0) +#define DP_LANE_STAT_CE_DONE (0x01 << 1) +#define DP_LANE_STAT_SYM_LOCK (0x01 << 2) + +struct exynos_fb { + u32 vidcon0; + u32 vidcon1; + u32 vidcon2; + u32 vidcon3; + u32 vidtcon0; + u32 vidtcon1; + u32 vidtcon2; + u32 vidtcon3; + u32 wincon0; + u32 wincon1; + u32 wincon2; + u32 wincon3; + u32 wincon4; + + u32 winshmap; + u32 res1; + + u32 winchmap2; + u32 vidosd0a; + u32 vidosd0b; + u32 vidosd0c; + u32 res2; + + u32 vidosd1a; + u32 vidosd1b; + u32 vidosd1c; + u32 vidosd1d; + + u32 vidosd2a; + u32 vidosd2b; + u32 vidosd2c; + u32 vidosd2d; + + u32 vidosd3a; + u32 vidosd3b; + u32 vidosd3c; + u32 res3; + + u32 vidosd4a; + u32 vidosd4b; + u32 vidosd4c; + u32 res4[5]; + + u32 vidw00add0b0; + u32 vidw00add0b1; + u32 vidw01add0b0; + u32 vidw01add0b1; + + u32 vidw02add0b0; + u32 vidw02add0b1; + u32 vidw03add0b0; + u32 vidw03add0b1; + u32 vidw04add0b0; + u32 vidw04add0b1; + u32 res5[2]; + + u32 vidw00add1b0; + u32 vidw00add1b1; + u32 vidw01add1b0; + u32 vidw01add1b1; + + u32 vidw02add1b0; + u32 vidw02add1b1; + u32 vidw03add1b0; + u32 vidw03add1b1; + + u32 vidw04add1b0; + u32 vidw04add1b1; + u32 res7[2]; + + u32 vidw00add2; + u32 vidw01add2; + u32 vidw02add2; + u32 vidw03add2; + u32 vidw04add2; + u32 res8[7]; + + u32 vidintcon0; + u32 vidintcon1; + u32 res9[1]; + + u32 w1keycon0; + u32 w1keycon1; + u32 w2keycon0; + u32 w2keycon1; + u32 w3keycon0; + u32 w3keycon1; + u32 w4keycon0; + u32 w4keycon1; + + u32 w1keyalpha; + u32 w2keyalpha; + u32 w3keyalpha; + u32 w4keyalpha; + + u32 dithmode; + u32 res10[2]; + + u32 win0map; + u32 win1map; + u32 win2map; + u32 win3map; + u32 win4map; + u32 res11[1]; + + u32 wpalcon_h; + u32 wpalcon_l; + + u32 trigcon; + u32 res12[2]; + + u32 i80ifcona0; + u32 i80ifcona1; + u32 i80ifconb0; + u32 i80ifconb1; + + u32 colorgaincon; + u32 res13[2]; + + u32 ldi_cmdcon0; + u32 ldi_cmdcon1; + u32 res14[1]; + + /* To be updated */ + + u8 res15[156]; + u32 dualrgb; + u8 res16[16]; + u32 dp_mie_clkcon; +}; + + +/* LCD IF register offset */ +#define EXYNOS5_LCD_IF_BASE_OFFSET 0x20000 + +static inline u32 exynos_fimd_get_base_offset(void) +{ + return EXYNOS5_LCD_IF_BASE_OFFSET/4; +} + +/* + * Register offsets +*/ +#define EXYNOS_WINCON(x) (x) +#define EXYNOS_VIDOSD(x) (x * 4) +#define EXYNOS_BUFFER_OFFSET(x) (x * 2) +#define EXYNOS_BUFFER_SIZE(x) (x) + +/* + * Bit Definitions +*/ + +/* VIDCON0 */ +#define EXYNOS_VIDCON0_DSI_DISABLE (0 << 30) +#define EXYNOS_VIDCON0_DSI_ENABLE (1 << 30) +#define EXYNOS_VIDCON0_SCAN_PROGRESSIVE (0 << 29) +#define EXYNOS_VIDCON0_SCAN_INTERLACE (1 << 29) +#define EXYNOS_VIDCON0_SCAN_MASK (1 << 29) +#define EXYNOS_VIDCON0_VIDOUT_RGB (0 << 26) +#define EXYNOS_VIDCON0_VIDOUT_ITU (1 << 26) +#define EXYNOS_VIDCON0_VIDOUT_I80LDI0 (2 << 26) +#define EXYNOS_VIDCON0_VIDOUT_I80LDI1 (3 << 26) +#define EXYNOS_VIDCON0_VIDOUT_WB_RGB (4 << 26) +#define EXYNOS_VIDCON0_VIDOUT_WB_I80LDI0 (6 << 26) +#define EXYNOS_VIDCON0_VIDOUT_WB_I80LDI1 (7 << 26) +#define EXYNOS_VIDCON0_VIDOUT_MASK (7 << 26) +#define EXYNOS_VIDCON0_PNRMODE_RGB_P (0 << 17) +#define EXYNOS_VIDCON0_PNRMODE_BGR_P (1 << 17) +#define EXYNOS_VIDCON0_PNRMODE_RGB_S (2 << 17) +#define EXYNOS_VIDCON0_PNRMODE_BGR_S (3 << 17) +#define EXYNOS_VIDCON0_PNRMODE_MASK (3 << 17) +#define EXYNOS_VIDCON0_PNRMODE_SHIFT (17) +#define EXYNOS_VIDCON0_CLKVALUP_ALWAYS (0 << 16) +#define EXYNOS_VIDCON0_CLKVALUP_START_FRAME (1 << 16) +#define EXYNOS_VIDCON0_CLKVALUP_MASK (1 << 16) +#define EXYNOS_VIDCON0_CLKVAL_F(x) (((x) & 0xff) << 6) +#define EXYNOS_VIDCON0_VCLKEN_NORMAL (0 << 5) +#define EXYNOS_VIDCON0_VCLKEN_FREERUN (1 << 5) +#define EXYNOS_VIDCON0_VCLKEN_MASK (1 << 5) +#define EXYNOS_VIDCON0_CLKDIR_DIRECTED (0 << 4) +#define EXYNOS_VIDCON0_CLKDIR_DIVIDED (1 << 4) +#define EXYNOS_VIDCON0_CLKDIR_MASK (1 << 4) +#define EXYNOS_VIDCON0_CLKSEL_HCLK (0 << 2) +#define EXYNOS_VIDCON0_CLKSEL_SCLK (1 << 2) +#define EXYNOS_VIDCON0_CLKSEL_MASK (1 << 2) +#define EXYNOS_VIDCON0_ENVID_ENABLE (1 << 1) +#define EXYNOS_VIDCON0_ENVID_DISABLE (0 << 1) +#define EXYNOS_VIDCON0_ENVID_F_ENABLE (1 << 0) +#define EXYNOS_VIDCON0_ENVID_F_DISABLE (0 << 0) + +/* VIDCON1 */ +#define EXYNOS_VIDCON1_IVCLK_FALLING_EDGE (0 << 7) +#define EXYNOS_VIDCON1_IVCLK_RISING_EDGE (1 << 7) +#define EXYNOS_VIDCON1_IHSYNC_NORMAL (0 << 6) +#define EXYNOS_VIDCON1_IHSYNC_INVERT (1 << 6) +#define EXYNOS_VIDCON1_IVSYNC_NORMAL (0 << 5) +#define EXYNOS_VIDCON1_IVSYNC_INVERT (1 << 5) +#define EXYNOS_VIDCON1_IVDEN_NORMAL (0 << 4) +#define EXYNOS_VIDCON1_IVDEN_INVERT (1 << 4) + +/* VIDCON2 */ +#define EXYNOS_VIDCON2_EN601_DISABLE (0 << 23) +#define EXYNOS_VIDCON2_EN601_ENABLE (1 << 23) +#define EXYNOS_VIDCON2_EN601_MASK (1 << 23) +#define EXYNOS_VIDCON2_WB_DISABLE (0 << 15) +#define EXYNOS_VIDCON2_WB_ENABLE (1 << 15) +#define EXYNOS_VIDCON2_WB_MASK (1 << 15) +#define EXYNOS_VIDCON2_TVFORMATSEL_HW (0 << 14) +#define EXYNOS_VIDCON2_TVFORMATSEL_SW (1 << 14) +#define EXYNOS_VIDCON2_TVFORMATSEL_MASK (1 << 14) +#define EXYNOS_VIDCON2_TVFORMATSEL_YUV422 (1 << 12) +#define EXYNOS_VIDCON2_TVFORMATSEL_YUV444 (2 << 12) +#define EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK (3 << 12) +#define EXYNOS_VIDCON2_ORGYUV_YCBCR (0 << 8) +#define EXYNOS_VIDCON2_ORGYUV_CBCRY (1 << 8) +#define EXYNOS_VIDCON2_ORGYUV_MASK (1 << 8) +#define EXYNOS_VIDCON2_YUVORD_CBCR (0 << 7) +#define EXYNOS_VIDCON2_YUVORD_CRCB (1 << 7) +#define EXYNOS_VIDCON2_YUVORD_MASK (1 << 7) + +/* PRTCON */ +#define EXYNOS_PRTCON_UPDATABLE (0 << 11) +#define EXYNOS_PRTCON_PROTECT (1 << 11) + +/* VIDTCON0 */ +#define EXYNOS_VIDTCON0_VBPDE(x) (((x) & 0xff) << 24) +#define EXYNOS_VIDTCON0_VBPD(x) (((x) & 0xff) << 16) +#define EXYNOS_VIDTCON0_VFPD(x) (((x) & 0xff) << 8) +#define EXYNOS_VIDTCON0_VSPW(x) (((x) & 0xff) << 0) + +/* VIDTCON1 */ +#define EXYNOS_VIDTCON1_VFPDE(x) (((x) & 0xff) << 24) +#define EXYNOS_VIDTCON1_HBPD(x) (((x) & 0xff) << 16) +#define EXYNOS_VIDTCON1_HFPD(x) (((x) & 0xff) << 8) +#define EXYNOS_VIDTCON1_HSPW(x) (((x) & 0xff) << 0) + +/* VIDTCON2 */ +#define EXYNOS_VIDTCON2_LINEVAL(x) (((x) & 0x7ff) << 11) +#define EXYNOS_VIDTCON2_HOZVAL(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDTCON2_LINEVAL_E(x) ((((x) & 0x800) >> 11) << 23) +#define EXYNOS_VIDTCON2_HOZVAL_E(x) ((((x) & 0x800) >> 11) << 22) + +/* Window 0~4 Control - WINCONx */ +#define EXYNOS_WINCON_DATAPATH_DMA (0 << 22) +#define EXYNOS_WINCON_DATAPATH_LOCAL (1 << 22) +#define EXYNOS_WINCON_DATAPATH_MASK (1 << 22) +#define EXYNOS_WINCON_BUFSEL_0 (0 << 20) +#define EXYNOS_WINCON_BUFSEL_1 (1 << 20) +#define EXYNOS_WINCON_BUFSEL_MASK (1 << 20) +#define EXYNOS_WINCON_BUFSEL_SHIFT (20) +#define EXYNOS_WINCON_BUFAUTO_DISABLE (0 << 19) +#define EXYNOS_WINCON_BUFAUTO_ENABLE (1 << 19) +#define EXYNOS_WINCON_BUFAUTO_MASK (1 << 19) +#define EXYNOS_WINCON_BITSWP_DISABLE (0 << 18) +#define EXYNOS_WINCON_BITSWP_ENABLE (1 << 18) +#define EXYNOS_WINCON_BITSWP_SHIFT (18) +#define EXYNOS_WINCON_BYTESWP_DISABLE (0 << 17) +#define EXYNOS_WINCON_BYTESWP_ENABLE (1 << 17) +#define EXYNOS_WINCON_BYTESWP_SHIFT (17) +#define EXYNOS_WINCON_HAWSWP_DISABLE (0 << 16) +#define EXYNOS_WINCON_HAWSWP_ENABLE (1 << 16) +#define EXYNOS_WINCON_HAWSWP_SHIFT (16) +#define EXYNOS_WINCON_WSWP_DISABLE (0 << 15) +#define EXYNOS_WINCON_WSWP_ENABLE (1 << 15) +#define EXYNOS_WINCON_WSWP_SHIFT (15) +#define EXYNOS_WINCON_INRGB_RGB (0 << 13) +#define EXYNOS_WINCON_INRGB_YUV (1 << 13) +#define EXYNOS_WINCON_INRGB_MASK (1 << 13) +#define EXYNOS_WINCON_BURSTLEN_16WORD (0 << 9) +#define EXYNOS_WINCON_BURSTLEN_8WORD (1 << 9) +#define EXYNOS_WINCON_BURSTLEN_4WORD (2 << 9) +#define EXYNOS_WINCON_BURSTLEN_MASK (3 << 9) +#define EXYNOS_WINCON_ALPHA_MULTI_DISABLE (0 << 7) +#define EXYNOS_WINCON_ALPHA_MULTI_ENABLE (1 << 7) +#define EXYNOS_WINCON_BLD_PLANE (0 << 6) +#define EXYNOS_WINCON_BLD_PIXEL (1 << 6) +#define EXYNOS_WINCON_BLD_MASK (1 << 6) +#define EXYNOS_WINCON_BPPMODE_1BPP (0 << 2) +#define EXYNOS_WINCON_BPPMODE_2BPP (1 << 2) +#define EXYNOS_WINCON_BPPMODE_4BPP (2 << 2) +#define EXYNOS_WINCON_BPPMODE_8BPP_PAL (3 << 2) +#define EXYNOS_WINCON_BPPMODE_8BPP (4 << 2) +#define EXYNOS_WINCON_BPPMODE_16BPP_565 (5 << 2) +#define EXYNOS_WINCON_BPPMODE_16BPP_A555 (6 << 2) +#define EXYNOS_WINCON_BPPMODE_18BPP_666 (8 << 2) +#define EXYNOS_WINCON_BPPMODE_18BPP_A665 (9 << 2) +#define EXYNOS_WINCON_BPPMODE_24BPP_888 (0xb << 2) +#define EXYNOS_WINCON_BPPMODE_24BPP_A887 (0xc << 2) +#define EXYNOS_WINCON_BPPMODE_32BPP (0xd << 2) +#define EXYNOS_WINCON_BPPMODE_16BPP_A444 (0xe << 2) +#define EXYNOS_WINCON_BPPMODE_15BPP_555 (0xf << 2) +#define EXYNOS_WINCON_BPPMODE_MASK (0xf << 2) +#define EXYNOS_WINCON_BPPMODE_SHIFT (2) +#define EXYNOS_WINCON_ALPHA0_SEL (0 << 1) +#define EXYNOS_WINCON_ALPHA1_SEL (1 << 1) +#define EXYNOS_WINCON_ALPHA_SEL_MASK (1 << 1) +#define EXYNOS_WINCON_ENWIN_DISABLE (0 << 0) +#define EXYNOS_WINCON_ENWIN_ENABLE (1 << 0) + +/* WINCON1 special */ +#define EXYNOS_WINCON1_VP_DISABLE (0 << 24) +#define EXYNOS_WINCON1_VP_ENABLE (1 << 24) +#define EXYNOS_WINCON1_LOCALSEL_FIMC1 (0 << 23) +#define EXYNOS_WINCON1_LOCALSEL_VP (1 << 23) +#define EXYNOS_WINCON1_LOCALSEL_MASK (1 << 23) + +/* WINSHMAP */ +#define EXYNOS_WINSHMAP_PROTECT(x) (((x) & 0x1f) << 10) +#define EXYNOS_WINSHMAP_CH_ENABLE(x) (1 << (x)) +#define EXYNOS_WINSHMAP_CH_DISABLE(x) (1 << (x)) +#define EXYNOS_WINSHMAP_LOCAL_ENABLE(x) (0x20 << (x)) +#define EXYNOS_WINSHMAP_LOCAL_DISABLE(x) (0x20 << (x)) + +/* VIDOSDxA, VIDOSDxB */ +#define EXYNOS_VIDOSD_LEFT_X(x) (((x) & 0x7ff) << 11) +#define EXYNOS_VIDOSD_TOP_Y(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDOSD_RIGHT_X(x) (((x) & 0x7ff) << 11) +#define EXYNOS_VIDOSD_BOTTOM_Y(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDOSD_RIGHT_X_E(x) (((x) & 0x1) << 23) +#define EXYNOS_VIDOSD_BOTTOM_Y_E(x) (((x) & 0x1) << 22) + +/* VIDOSD0C, VIDOSDxD */ +#define EXYNOS_VIDOSD_SIZE(x) (((x) & 0xffffff) << 0) + +/* VIDOSDxC (1~4) */ +#define EXYNOS_VIDOSD_ALPHA0_R(x) (((x) & 0xf) << 20) +#define EXYNOS_VIDOSD_ALPHA0_G(x) (((x) & 0xf) << 16) +#define EXYNOS_VIDOSD_ALPHA0_B(x) (((x) & 0xf) << 12) +#define EXYNOS_VIDOSD_ALPHA1_R(x) (((x) & 0xf) << 8) +#define EXYNOS_VIDOSD_ALPHA1_G(x) (((x) & 0xf) << 4) +#define EXYNOS_VIDOSD_ALPHA1_B(x) (((x) & 0xf) << 0) +#define EXYNOS_VIDOSD_ALPHA0_SHIFT (12) +#define EXYNOS_VIDOSD_ALPHA1_SHIFT (0) + +/* Start Address */ +#define EXYNOS_VIDADDR_START_VBANK(x) (((x) & 0xff) << 24) +#define EXYNOS_VIDADDR_START_VBASEU(x) (((x) & 0xffffff) << 0) + +/* End Address */ +#define EXYNOS_VIDADDR_END_VBASEL(x) (((x) & 0xffffff) << 0) + +/* Buffer Size */ +#define EXYNOS_VIDADDR_OFFSIZE(x) (((x) & 0x1fff) << 13) +#define EXYNOS_VIDADDR_PAGEWIDTH(x) (((x) & 0x1fff) << 0) +#define EXYNOS_VIDADDR_OFFSIZE_E(x) ((((x) & 0x2000) >> 13) << 27) +#define EXYNOS_VIDADDR_PAGEWIDTH_E(x) ((((x) & 0x2000) >> 13) << 26) + +/* WIN Color Map */ +#define EXYNOS_WINMAP_COLOR(x) ((x) & 0xffffff) + +/* VIDINTCON0 */ +#define EXYNOS_VIDINTCON0_SYSMAINCON_DISABLE (0 << 19) +#define EXYNOS_VIDINTCON0_SYSMAINCON_ENABLE (1 << 19) +#define EXYNOS_VIDINTCON0_SYSSUBCON_DISABLE (0 << 18) +#define EXYNOS_VIDINTCON0_SYSSUBCON_ENABLE (1 << 18) +#define EXYNOS_VIDINTCON0_SYSIFDONE_DISABLE (0 << 17) +#define EXYNOS_VIDINTCON0_SYSIFDONE_ENABLE (1 << 17) +#define EXYNOS_VIDINTCON0_FRAMESEL0_BACK (0 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL0_VSYNC (1 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL0_ACTIVE (2 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL0_FRONT (3 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL0_MASK (3 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL1_NONE (0 << 13) +#define EXYNOS_VIDINTCON0_FRAMESEL1_BACK (1 << 13) +#define EXYNOS_VIDINTCON0_FRAMESEL1_VSYNC (2 << 13) +#define EXYNOS_VIDINTCON0_FRAMESEL1_FRONT (3 << 13) +#define EXYNOS_VIDINTCON0_INTFRMEN_DISABLE (0 << 12) +#define EXYNOS_VIDINTCON0_INTFRMEN_ENABLE (1 << 12) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN4 (1 << 11) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN3 (1 << 10) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN2 (1 << 9) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN1 (1 << 6) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN0 (1 << 5) +#define EXYNOS_VIDINTCON0_FIFOSEL_ALL (0x73 << 5) +#define EXYNOS_VIDINTCON0_FIFOSEL_MASK (0x73 << 5) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_25 (0 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_50 (1 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_75 (2 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_EMPTY (3 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_FULL (4 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_MASK (7 << 2) +#define EXYNOS_VIDINTCON0_INTFIFO_DISABLE (0 << 1) +#define EXYNOS_VIDINTCON0_INTFIFO_ENABLE (1 << 1) +#define EXYNOS_VIDINTCON0_INT_DISABLE (0 << 0) +#define EXYNOS_VIDINTCON0_INT_ENABLE (1 << 0) +#define EXYNOS_VIDINTCON0_INT_MASK (1 << 0) + +/* VIDINTCON1 */ +#define EXYNOS_VIDINTCON1_INTVPPEND (1 << 5) +#define EXYNOS_VIDINTCON1_INTI80PEND (1 << 2) +#define EXYNOS_VIDINTCON1_INTFRMPEND (1 << 1) +#define EXYNOS_VIDINTCON1_INTFIFOPEND (1 << 0) + +/* WINMAP */ +#define EXYNOS_WINMAP_ENABLE (1 << 24) + +/* WxKEYCON0 (1~4) */ +#define EXYNOS_KEYCON0_KEYBLEN_DISABLE (0 << 26) +#define EXYNOS_KEYCON0_KEYBLEN_ENABLE (1 << 26) +#define EXYNOS_KEYCON0_KEY_DISABLE (0 << 25) +#define EXYNOS_KEYCON0_KEY_ENABLE (1 << 25) +#define EXYNOS_KEYCON0_DIRCON_MATCH_FG (0 << 24) +#define EXYNOS_KEYCON0_DIRCON_MATCH_BG (1 << 24) +#define EXYNOS_KEYCON0_COMPKEY(x) (((x) & 0xffffff) << 0) + +/* WxKEYCON1 (1~4) */ +#define EXYNOS_KEYCON1_COLVAL(x) (((x) & 0xffffff) << 0) + +/* DUALRGB */ +#define EXYNOS_DUALRGB_BYPASS_SINGLE (0x00 << 0) +#define EXYNOS_DUALRGB_BYPASS_DUAL (0x01 << 0) +#define EXYNOS_DUALRGB_MIE_DUAL (0x10 << 0) +#define EXYNOS_DUALRGB_MIE_SINGLE (0x11 << 0) +#define EXYNOS_DUALRGB_LINESPLIT (0x0 << 2) +#define EXYNOS_DUALRGB_FRAMESPLIT (0x1 << 2) +#define EXYNOS_DUALRGB_SUB_CNT(x) ((x & 0xfff) << 4) +#define EXYNOS_DUALRGB_VDEN_EN_DISABLE (0x0 << 16) +#define EXYNOS_DUALRGB_VDEN_EN_ENABLE (0x1 << 16) +#define EXYNOS_DUALRGB_MAIN_CNT(x) ((x & 0xfff) << 18) + +/* I80IFCONA0 and I80IFCONA1 */ +#define EXYNOS_LCD_CS_SETUP(x) (((x) & 0xf) << 16) +#define EXYNOS_LCD_WR_SETUP(x) (((x) & 0xf) << 12) +#define EXYNOS_LCD_WR_ACT(x) (((x) & 0xf) << 8) +#define EXYNOS_LCD_WR_HOLD(x) (((x) & 0xf) << 4) +#define EXYNOS_RSPOL_LOW (0 << 2) +#define EXYNOS_RSPOL_HIGH (1 << 2) +#define EXYNOS_I80IFEN_DISABLE (0 << 0) +#define EXYNOS_I80IFEN_ENABLE (1 << 0) + +/* TRIGCON */ +#define EXYNOS_I80SOFT_TRIG_EN (1 << 0) +#define EXYNOS_I80START_TRIG (1 << 1) +#define EXYNOS_I80STATUS_TRIG_DONE (1 << 2) + +/* DP_MIE_CLKCON */ +#define EXYNOS_DP_MIE_DISABLE (0 << 0) +#define EXYNOS_DP_CLK_ENABLE (1 << 1) +#define EXYNOS_MIE_CLK_ENABLE (3 << 0) + +#define DP_TIMEOUT_LOOP_COUNT 100 +#define MAX_CR_LOOP 5 +#define MAX_EQ_LOOP 4 + +#define EXYNOS_DP_SUCCESS 0 + +enum { + DP_DISABLE, + DP_ENABLE, +}; + +struct edp_disp_info { + char *name; + unsigned int h_total; + unsigned int h_res; + unsigned int h_sync_width; + unsigned int h_back_porch; + unsigned int h_front_porch; + unsigned int v_total; + unsigned int v_res; + unsigned int v_sync_width; + unsigned int v_back_porch; + unsigned int v_front_porch; + unsigned int v_sync_rate; +}; + +struct edp_link_train_info { + unsigned int lt_status; + unsigned int ep_loop; + unsigned int cr_loop[4]; +}; + +struct edp_video_info { + unsigned int master_mode; + unsigned int bist_mode; + unsigned int bist_pattern; + unsigned int h_sync_polarity; + unsigned int v_sync_polarity; + unsigned int interlaced; + unsigned int color_space; + unsigned int dynamic_range; + unsigned int ycbcr_coeff; + unsigned int color_depth; +}; + +struct edp_device_info { + struct edp_disp_info disp_info; + struct edp_link_train_info lt_info; + struct edp_video_info video_info; + + /*below info get from panel during training*/ + u8 lane_bw; + u8 lane_cnt; + u8 dpcd_rev; + /*support enhanced frame cap */ + u8 dpcd_efc; + u8 *raw_edid; +}; + +enum analog_power_block { + AUX_BLOCK, + CH0_BLOCK, + CH1_BLOCK, + CH2_BLOCK, + CH3_BLOCK, + ANALOG_TOTAL, + POWER_ALL +}; + +enum pll_status { + PLL_UNLOCKED = 0, + PLL_LOCKED +}; + +enum { + COLOR_RGB, + COLOR_YCBCR422, + COLOR_YCBCR444 +}; + +enum { + VESA, + CEA +}; + +enum { + COLOR_YCBCR601, + COLOR_YCBCR709 +}; + +enum { + COLOR_6, + COLOR_8, + COLOR_10, + COLOR_12 +}; + +enum { + DP_LANE_BW_1_62 = 0x06, + DP_LANE_BW_2_70 = 0x0a, +}; + +enum { + DP_LANE_CNT_1 = 1, + DP_LANE_CNT_2 = 2, + DP_LANE_CNT_4 = 4, +}; + +enum { + DP_DPCD_REV_10 = 0x10, + DP_DPCD_REV_11 = 0x11, +}; + +enum { + DP_LT_NONE, + DP_LT_START, + DP_LT_CR, + DP_LT_ET, + DP_LT_FINISHED, + DP_LT_FAIL, +}; + +enum { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +enum { + PRBS7, + D10_2, + TRAINING_PTN1, + TRAINING_PTN2, + DP_NONE +}; + +enum { + VOLTAGE_LEVEL_0, + VOLTAGE_LEVEL_1, + VOLTAGE_LEVEL_2, + VOLTAGE_LEVEL_3, +}; + +enum pattern_type { + NO_PATTERN, + COLOR_RAMP, + BALCK_WHITE_V_LINES, + COLOR_SQUARE, + INVALID_PATTERN, + COLORBAR_32, + COLORBAR_64, + WHITE_GRAY_BALCKBAR_32, + WHITE_GRAY_BALCKBAR_64, + MOBILE_WHITEBAR_32, + MOBILE_WHITEBAR_64 +}; + +enum { + CALCULATED_M, + REGISTER_M +}; + +enum { + VIDEO_TIMING_FROM_CAPTURE, + VIDEO_TIMING_FROM_REGISTER +}; + + +struct exynos_dp_platform_data { + struct edp_device_info *edp_dev_info; +}; + + +int exynos_init_dp(struct edp_device_info *edp_info); + +void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd); + +void exynos_dp_disable_video_bist(void); +void exynos_dp_enable_video_mute(unsigned int enable); +void exynos_dp_reset(void); +void exynos_dp_enable_sw_func(unsigned int enable); +unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable); +unsigned int exynos_dp_get_pll_lock_status(void); +int exynos_dp_init_analog_func(void); +void exynos_dp_init_hpd(void); +void exynos_dp_init_aux(void); +void exynos_dp_config_interrupt(void); +unsigned int exynos_dp_get_plug_in_status(void); +unsigned int exynos_dp_detect_hpd(void); +unsigned int exynos_dp_start_aux_transaction(void); +unsigned int exynos_dp_write_byte_to_dpcd(u32 reg_addr, + u8 data); +unsigned int exynos_dp_read_byte_from_dpcd(u32 reg_addr, + u8 *data); +unsigned int exynos_dp_write_bytes_to_dpcd(u32 reg_addr, + unsigned int count, + u8 data[]); +u32 exynos_dp_read_bytes_from_dpcd( unsigned int reg_addr, + unsigned int count, + u8 data[]); +int exynos_dp_select_i2c_device( u32 device_addr, + u32 reg_addr); +int exynos_dp_read_byte_from_i2c(u32 device_addr, + u32 reg_addr, unsigned int *data); +int exynos_dp_read_bytes_from_i2c(u32 device_addr, + u32 reg_addr, unsigned int count, + u8 edid[]); +void exynos_dp_reset_macro(void); +void exynos_dp_set_link_bandwidth(u8 bwtype); +u8 exynos_dp_get_link_bandwidth(void); +void exynos_dp_set_lane_count(u8 count); +unsigned int exynos_dp_get_lane_count(void); +u8 exynos_dp_get_lanex_pre_emphasis(u8 lanecnt); +void exynos_dp_set_lane_pre_emphasis(unsigned int level, + u8 lanecnt); +void exynos_dp_set_lanex_pre_emphasis(u8 request_val, + u8 lanecnt); +void exynos_dp_set_training_pattern(unsigned int pattern); +void exynos_dp_enable_enhanced_mode(u8 enable); +void exynos_dp_enable_scrambling(unsigned int enable); +int exynos_dp_init_video(void); +void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info); +void exynos_dp_set_video_color_format(struct edp_video_info *video_info); +int exynos_dp_config_video_bist(struct edp_device_info *edp_info); +unsigned int exynos_dp_is_slave_video_stream_clock_on(void); +void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, + unsigned int n_value); +void exynos_dp_set_video_timing_mode(unsigned int type); +void exynos_dp_enable_video_master(unsigned int enable); +void exynos_dp_start_video(void); +unsigned int exynos_dp_is_video_stream_on(void); +void exynos_dp_set_base_addr(void); +void dp_phy_control(unsigned int enable); #endif diff --git a/src/cpu/samsung/exynos5420/dp_lowlevel.c b/src/cpu/samsung/exynos5420/dp_lowlevel.c new file mode 100644 index 0000000000..64a296258d --- /dev/null +++ b/src/cpu/samsung/exynos5420/dp_lowlevel.c @@ -0,0 +1,1199 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include "timer.h" +#include "cpu.h" +#include "power.h" +#include "sysreg.h" +#include + +#include "device/i2c.h" +#include "i2c.h" +#include "fimd.h" +#include "dp.h" + +/* in u-boot, there's a function you call to set a pointer + * to a constant. Klever! + */ +struct exynos_dp *dp_regs = samsung_get_base_dp(); + +/* for debugging, it's nice to get control on a per-file basis. + * I had a bit of a discussion with myself (boring!) about + * how to do this and for the moment this is the easiest way. + * These debugging statements allowed me to find the final bugs. + */ + +#if 0 +static inline void fwadl(unsigned long l,void *v) { + writel(l, v); + printk(BIOS_SPEW, "W %p %p\n", v, (void *)l); +} +#define lwrite32(a,b) fwadl((unsigned long)(a), (void *)(b)) + +static inline unsigned long fradl(void *v) { + unsigned long l = readl(v); + printk(BIOS_SPEW, "R %p %p\n", v, (void *)l); + return l; +} + +#define lread32(a) fradl((void *)(a)) +#else +#define lwrite32(a,b) write32((unsigned long)(a), (void *)(b)) +#define lread32(a) read32((void *)(a)) +#endif + +static void exynos_dp_enable_video_input(u32 enable) +{ + u32 reg; + + reg = lread32(&dp_regs->video_ctl1); + reg &= ~VIDEO_EN_MASK; + + /* enable video input*/ + if (enable) + reg |= VIDEO_EN_MASK; + + lwrite32(reg, &dp_regs->video_ctl1); + + return; +} + +void exynos_dp_disable_video_bist(void) +{ + u32 reg; + reg = lread32(&dp_regs->video_ctl4); + reg &= ~VIDEO_BIST_MASK; + lwrite32(reg, &dp_regs->video_ctl4); +} + +void exynos_dp_enable_video_mute(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->video_ctl1); + reg &= ~(VIDEO_MUTE_MASK); + if (enable) + reg |= VIDEO_MUTE_MASK; + + lwrite32(reg, &dp_regs->video_ctl1); + + return; +} + + +static void exynos_dp_init_analog_param(void) +{ + u32 reg; + + /* + * Set termination + * Normal bandgap, Normal swing, Tx terminal registor 61 ohm + * 24M Phy clock, TX digital logic power is 100:1.0625V + */ + reg = SEL_BG_NEW_BANDGAP | TX_TERMINAL_CTRL_61_OHM | + SWING_A_30PER_G_NORMAL; + lwrite32(reg, &dp_regs->analog_ctl1); + + reg = SEL_24M | TX_DVDD_BIT_1_0625V; + lwrite32(reg, &dp_regs->analog_ctl2); + + /* + * Set power source for internal clk driver to 1.0625v. + * Select current reference of TX driver current to 00:Ipp/2+Ic/2. + * Set VCO range of PLL +- 0uA + */ + reg = DRIVE_DVDD_BIT_1_0625V | SEL_CURRENT_DEFAULT | VCO_BIT_000_MICRO; + lwrite32(reg, &dp_regs->analog_ctl3); + + /* + * Set AUX TX terminal resistor to 102 ohm + * Set AUX channel amplitude control + */ + reg = PD_RING_OSC | AUX_TERMINAL_CTRL_52_OHM | TX_CUR1_2X | TX_CUR_4_MA; + lwrite32(reg, &dp_regs->pll_filter_ctl1); + + /* + * PLL loop filter bandwidth + * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz + * PLL digital power select: 1.2500V + */ + reg = CH3_AMP_0_MV | CH2_AMP_0_MV | CH1_AMP_0_MV | CH0_AMP_0_MV; + + lwrite32(reg, &dp_regs->amp_tuning_ctl); + + /* + * PLL loop filter bandwidth + * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz + * PLL digital power select: 1.1250V + */ + reg = DP_PLL_LOOP_BIT_DEFAULT | DP_PLL_REF_BIT_1_1250V; + lwrite32(reg, &dp_regs->pll_ctl); +} + +static void exynos_dp_init_interrupt(void) +{ + /* Set interrupt registers to initial states */ + + /* + * Disable interrupt + * INT pin assertion polarity. It must be configured + * correctly according to ICU setting. + * 1 = assert high, 0 = assert low + */ + lwrite32(INT_POL, &dp_regs->int_ctl); + + /* Clear pending regisers */ + lwrite32(0xff, &dp_regs->common_int_sta1); + lwrite32(0xff, &dp_regs->common_int_sta2); + lwrite32(0xff, &dp_regs->common_int_sta3); + lwrite32(0xff, &dp_regs->common_int_sta4); + lwrite32(0xff, &dp_regs->int_sta); + + /* 0:mask,1: unmask */ + lwrite32(0x00, &dp_regs->int_sta_mask1); + lwrite32(0x00, &dp_regs->int_sta_mask2); + lwrite32(0x00, &dp_regs->int_sta_mask3); + lwrite32(0x00, &dp_regs->int_sta_mask4); + lwrite32(0x00, &dp_regs->int_sta_mask); +} + +void exynos_dp_reset(void) +{ + u32 reg_func_1; + + /*dp tx sw reset*/ + lwrite32(RESET_DP_TX, &dp_regs->tx_sw_reset); + + exynos_dp_enable_video_input(DP_DISABLE); + exynos_dp_disable_video_bist(); + exynos_dp_enable_video_mute(DP_DISABLE); + + /* software reset */ + reg_func_1 = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | + AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | + HDCP_FUNC_EN_N | SW_FUNC_EN_N; + + lwrite32(reg_func_1, &dp_regs->func_en1); + lwrite32(reg_func_1, &dp_regs->func_en2); + + mdelay(1); + + exynos_dp_init_analog_param(); + exynos_dp_init_interrupt(); + + return; +} + +void exynos_dp_enable_sw_func(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->func_en1); + reg &= ~(SW_FUNC_EN_N); + + if (!enable) + reg |= SW_FUNC_EN_N; + + lwrite32(reg, &dp_regs->func_en1); + + return; +} + +unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable) +{ + u32 reg; + + reg = lread32(&dp_regs->phy_pd); + switch (block) { + case AUX_BLOCK: + reg &= ~(AUX_PD); + if (enable) + reg |= AUX_PD; + break; + case CH0_BLOCK: + reg &= ~(CH0_PD); + if (enable) + reg |= CH0_PD; + break; + case CH1_BLOCK: + reg &= ~(CH1_PD); + if (enable) + reg |= CH1_PD; + break; + case CH2_BLOCK: + reg &= ~(CH2_PD); + if (enable) + reg |= CH2_PD; + break; + case CH3_BLOCK: + reg &= ~(CH3_PD); + if (enable) + reg |= CH3_PD; + break; + case ANALOG_TOTAL: + reg &= ~PHY_PD; + if (enable) + reg |= PHY_PD; + break; + case POWER_ALL: + reg &= ~(PHY_PD | AUX_PD | CH0_PD | CH1_PD | CH2_PD | + CH3_PD); + if (enable) + reg |= (PHY_PD | AUX_PD | CH0_PD | CH1_PD | + CH2_PD | CH3_PD); + break; + default: + printk(BIOS_ERR, "DP undefined block number : %d\n", block); + return -1; + } + + lwrite32(reg, &dp_regs->phy_pd); + + return 0; +} + +unsigned int exynos_dp_get_pll_lock_status(void) +{ + u32 reg; + + reg = lread32(&dp_regs->debug_ctl); + + if (reg & PLL_LOCK) + return PLL_LOCKED; + else + return PLL_UNLOCKED; +} + +static void exynos_dp_set_pll_power(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->pll_ctl); + reg &= ~(DP_PLL_PD); + + if (!enable) + reg |= DP_PLL_PD; + + lwrite32(reg, &dp_regs->pll_ctl); +} + +int exynos_dp_init_analog_func(void) +{ + int ret = EXYNOS_DP_SUCCESS; + unsigned int retry_cnt = 10; + u32 reg; + + /*Power On All Analog block */ + exynos_dp_set_analog_power_down(POWER_ALL, DP_DISABLE); + + reg = PLL_LOCK_CHG; + lwrite32(reg, &dp_regs->common_int_sta1); + + reg = lread32(&dp_regs->debug_ctl); + reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL); + lwrite32(reg, &dp_regs->debug_ctl); + + /*Assert DP PLL Reset*/ + reg = lread32(&dp_regs->pll_ctl); + reg |= DP_PLL_RESET; + lwrite32(reg, &dp_regs->pll_ctl); + + mdelay(1); + + /*Deassert DP PLL Reset*/ + reg = lread32(&dp_regs->pll_ctl); + reg &= ~(DP_PLL_RESET); + lwrite32(reg, &dp_regs->pll_ctl); + + exynos_dp_set_pll_power(DP_ENABLE); + + while (exynos_dp_get_pll_lock_status() == PLL_UNLOCKED) { + mdelay(1); + retry_cnt--; + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP dp's pll lock failed : retry : %d\n", + retry_cnt); + return -1; + } + } + + printk(BIOS_DEBUG, "dp's pll lock success(%d)\n", retry_cnt); + + /* Enable Serdes FIFO function and Link symbol clock domain module */ + reg = lread32(&dp_regs->func_en2); + reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N + | AUX_FUNC_EN_N); + lwrite32(reg, &dp_regs->func_en2); + + return ret; +} + +void exynos_dp_init_hpd(void) +{ + u32 reg; + + /* Clear interrupts releated to Hot Plug Dectect */ + reg = HOTPLUG_CHG | HPD_LOST | PLUG; + lwrite32(reg, &dp_regs->common_int_sta4); + + reg = INT_HPD; + lwrite32(reg, &dp_regs->int_sta); + + reg = lread32(&dp_regs->sys_ctl3); + reg &= ~(F_HPD | HPD_CTRL); + lwrite32(reg, &dp_regs->sys_ctl3); + + return; +} + +static inline void exynos_dp_reset_aux(void) +{ + u32 reg; + + /* Disable AUX channel module */ + reg = lread32(&dp_regs->func_en2); + reg |= AUX_FUNC_EN_N; + lwrite32(reg, &dp_regs->func_en2); + + return; +} + +void exynos_dp_init_aux(void) +{ + u32 reg; + + /* Clear inerrupts related to AUX channel */ + reg = RPLY_RECEIV | AUX_ERR; + lwrite32(reg, &dp_regs->int_sta); + + exynos_dp_reset_aux(); + + /* Disable AUX transaction H/W retry */ + reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(3)| + AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; + lwrite32(reg, &dp_regs->aux_hw_retry_ctl); + + /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ + reg = DEFER_CTRL_EN | DEFER_COUNT(1); + lwrite32(reg, &dp_regs->aux_ch_defer_ctl); + + /* Enable AUX channel module */ + reg = lread32(&dp_regs->func_en2); + reg &= ~AUX_FUNC_EN_N; + lwrite32(reg, &dp_regs->func_en2); + + return; +} + +void exynos_dp_config_interrupt(void) +{ + u32 reg; + + /* 0: mask, 1: unmask */ + reg = COMMON_INT_MASK_1; + lwrite32(reg, &dp_regs->common_int_mask1); + + reg = COMMON_INT_MASK_2; + lwrite32(reg, &dp_regs->common_int_mask2); + + reg = COMMON_INT_MASK_3; + lwrite32(reg, &dp_regs->common_int_mask3); + + reg = COMMON_INT_MASK_4; + lwrite32(reg, &dp_regs->common_int_mask4); + + reg = INT_STA_MASK; + lwrite32(reg, &dp_regs->int_sta_mask); + + return; +} + +unsigned int exynos_dp_get_plug_in_status(void) +{ + u32 reg; + + reg = lread32(&dp_regs->sys_ctl3); + if (reg & HPD_STATUS) + return 0; + + return -1; +} + +unsigned int exynos_dp_detect_hpd(void) +{ + int timeout_loop = DP_TIMEOUT_LOOP_COUNT; + + mdelay(2); + + while (exynos_dp_get_plug_in_status() != 0) { + if (timeout_loop == 0) + return -1; + mdelay(10); + timeout_loop--; + } + + return EXYNOS_DP_SUCCESS; +} + +unsigned int exynos_dp_start_aux_transaction(void) +{ + u32 reg; + unsigned int ret = 0; + unsigned int retry_cnt; + + /* Enable AUX CH operation */ + reg = lread32(&dp_regs->aux_ch_ctl2); + reg |= AUX_EN; + lwrite32(reg, &dp_regs->aux_ch_ctl2); + + retry_cnt = 10; + while (retry_cnt) { + reg = lread32(&dp_regs->int_sta); + if (!(reg & RPLY_RECEIV)) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP Reply Timeout!!\n"); + ret = -1; + return ret; + } + mdelay(1); + retry_cnt--; + } else + break; + } + + /* Clear interrupt source for AUX CH command reply */ + lwrite32(reg, &dp_regs->int_sta); + + /* Clear interrupt source for AUX CH access error */ + reg = lread32(&dp_regs->int_sta); + if (reg & AUX_ERR) { + printk(BIOS_ERR, "DP Aux Access Error\n"); + lwrite32(AUX_ERR, &dp_regs->int_sta); + ret = -1; + return ret; + } + + /* Check AUX CH error access status */ + reg = lread32(&dp_regs->aux_ch_sta); + if ((reg & AUX_STATUS_MASK) != 0) { + printk(BIOS_DEBUG, "DP AUX CH error happens: %x\n", reg & AUX_STATUS_MASK); + ret = -1; + return ret; + } + return EXYNOS_DP_SUCCESS; +} + +unsigned int exynos_dp_write_byte_to_dpcd(u32 reg_addr, u8 data) +{ + u32 reg; + unsigned int ret; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_19_16); + + /* Write data buffer */ + reg = data; + lwrite32(reg, &dp_regs->buf_data0); + + /* + * Set DisplayPort transaction and write 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP Aux transaction failed\n"); + } + + return ret; +} + +unsigned int exynos_dp_read_byte_from_dpcd(u32 reg_addr, + unsigned char *data) +{ + u32 reg; + int retval; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_19_16); + + /* + * Set DisplayPort transaction and read 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != EXYNOS_DP_SUCCESS) + printk(BIOS_DEBUG, "DP Aux Transaction fail!\n"); + + /* Read data buffer */ + reg = lread32(&dp_regs->buf_data0); + *data = (unsigned char)(reg & 0xff); + + return retval; +} + +unsigned int exynos_dp_write_bytes_to_dpcd(u32 reg_addr, + unsigned int count, + unsigned char data[]) +{ + u32 reg; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + unsigned int retry_cnt; + unsigned int ret = 0; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + retry_cnt = 5; + while (retry_cnt) { + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_19_16); + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + reg = data[start_offset + cur_data_idx]; + lwrite32(reg, (void *)((unsigned int)&dp_regs->buf_data0 + + (4 * cur_data_idx))); + } + /* + * Set DisplayPort transaction and write + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP Aux Transaction failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + start_offset += cur_data_count; + } + + return ret; +} + +unsigned int exynos_dp_read_bytes_from_dpcd(u32 reg_addr, + unsigned int count, + unsigned char data[]) +{ + u32 reg; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + unsigned int retry_cnt; + unsigned int ret = 0; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + retry_cnt = 5; + while (retry_cnt) { + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_19_16); + /* + * Set DisplayPort transaction and read + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP Aux Transaction failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + reg = lread32((void *)((u32)&dp_regs->buf_data0 + + 4 * cur_data_idx)); + data[start_offset + cur_data_idx] = (unsigned char)reg; + } + + start_offset += cur_data_count; + } + + return ret; +} + +int exynos_dp_select_i2c_device(u32 device_addr, + u32 reg_addr) +{ + u32 reg; + int retval; + + /* Set EDID device address */ + reg = device_addr; + lwrite32(reg, &dp_regs->aux_addr_7_0); + lwrite32(0x0, &dp_regs->aux_addr_15_8); + lwrite32(0x0, &dp_regs->aux_addr_19_16); + + /* Set offset from base address of EDID device */ + lwrite32(reg_addr, &dp_regs->buf_data0); + + /* + * Set I2C transaction and write address + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | + AUX_TX_COMM_WRITE; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != 0) + printk(BIOS_DEBUG, "%s: DP Aux Transaction fail!\n", __func__); + + return retval; +} + +int exynos_dp_read_byte_from_i2c(u32 device_addr, + u32 reg_addr, + unsigned int *data) +{ + u32 reg; + int i; + int retval; + + for (i = 0; i < 10; i++) { + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + /* Select EDID device */ + retval = exynos_dp_select_i2c_device(device_addr, reg_addr); + if (retval != 0) { + printk(BIOS_DEBUG, "DP Select EDID device fail. retry !\n"); + continue; + } + + /* + * Set I2C transaction and read data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != EXYNOS_DP_SUCCESS) + printk(BIOS_DEBUG, "%s: DP Aux Transaction fail!\n", __func__); + } + + /* Read data */ + if (retval == 0) + *data = lread32(&dp_regs->buf_data0); + + return retval; +} + +int exynos_dp_read_bytes_from_i2c(u32 device_addr, + u32 reg_addr, unsigned int count, unsigned char edid[]) +{ + u32 reg; + unsigned int i, j; + unsigned int cur_data_idx; + unsigned int defer = 0; + int retval = 0; + + for (i = 0; i < count; i += 16) { /* use 16 burst */ + for (j = 0; j < 100; j++) { + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + /* Set normal AUX CH command */ + reg = lread32(&dp_regs->aux_ch_ctl2); + reg &= ~ADDR_ONLY; + lwrite32(reg, &dp_regs->aux_ch_ctl2); + + /* + * If Rx sends defer, Tx sends only reads + * request without sending addres + */ + if (!defer) + retval = + exynos_dp_select_i2c_device(device_addr, + reg_addr + i); + else + defer = 0; + + if (retval == EXYNOS_DP_SUCCESS) { + /* + * Set I2C transaction and write data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(16) | + AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval == 0) + break; + else + printk(BIOS_ERR, "DP Aux Transaction fail!\n"); + } + /* Check if Rx sends defer */ + reg = lread32(&dp_regs->aux_rx_comm); + if (reg == AUX_RX_COMM_AUX_DEFER || + reg == AUX_RX_COMM_I2C_DEFER) { + printk(BIOS_ERR, "DP Defer: %d\n\n", reg); + defer = 1; + } + } + + for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { + reg = lread32((void *)((u32)&dp_regs->buf_data0 + + 4 * cur_data_idx)); + edid[i + cur_data_idx] = (unsigned char)reg; + } + } + + return retval; +} + +void exynos_dp_reset_macro(void) +{ + u32 reg; + + reg = lread32(&dp_regs->phy_test); + reg |= MACRO_RST; + lwrite32(reg, &dp_regs->phy_test); + + /* 10 us is the minimum Macro reset time. */ + mdelay(1); + + reg &= ~MACRO_RST; + lwrite32(reg, &dp_regs->phy_test); +} + +void exynos_dp_set_link_bandwidth(unsigned char bwtype) +{ + u32 reg; + + reg = (u32)bwtype; + + /* Set bandwidth to 2.7G or 1.62G */ + if ((bwtype == DP_LANE_BW_1_62) || (bwtype == DP_LANE_BW_2_70)) + lwrite32(reg, &dp_regs->link_bw_set); +} + +unsigned char exynos_dp_get_link_bandwidth(void) +{ + unsigned char ret; + u32 reg; + + reg = lread32(&dp_regs->link_bw_set); + ret = (unsigned char)reg; + + return ret; +} + +void exynos_dp_set_lane_count(unsigned char count) +{ + u32 reg; + + reg = (u32)count; + + if ((count == DP_LANE_CNT_1) || (count == DP_LANE_CNT_2) || + (count == DP_LANE_CNT_4)) + lwrite32(reg, &dp_regs->lane_count_set); +} + +unsigned int exynos_dp_get_lane_count(void) +{ + u32 reg; + + reg = lread32(&dp_regs->lane_count_set); + + return reg; +} + +unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt) +{ + void *reg_list[DP_LANE_CNT_4] = { + &dp_regs->ln0_link_training_ctl, + &dp_regs->ln1_link_training_ctl, + &dp_regs->ln2_link_training_ctl, + &dp_regs->ln3_link_training_ctl, + }; + + return lread32(reg_list[lanecnt]); +} + +void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val, + unsigned char lanecnt) +{ + void * reg_list[DP_LANE_CNT_4] = { + &dp_regs->ln0_link_training_ctl, + &dp_regs->ln1_link_training_ctl, + &dp_regs->ln2_link_training_ctl, + &dp_regs->ln3_link_training_ctl, + }; + + lwrite32(request_val, reg_list[lanecnt]); +} + +void exynos_dp_set_lane_pre_emphasis(unsigned int level, unsigned char lanecnt) +{ + unsigned char i; + u32 reg; + void *reg_list[DP_LANE_CNT_4] = { + &dp_regs->ln0_link_training_ctl, + &dp_regs->ln1_link_training_ctl, + &dp_regs->ln2_link_training_ctl, + &dp_regs->ln3_link_training_ctl, + }; + u32 reg_shift[DP_LANE_CNT_4] = { + PRE_EMPHASIS_SET_0_SHIFT, + PRE_EMPHASIS_SET_1_SHIFT, + PRE_EMPHASIS_SET_2_SHIFT, + PRE_EMPHASIS_SET_3_SHIFT + }; + + for (i = 0; i < lanecnt; i++) { + reg = level << reg_shift[i]; + lwrite32(reg, reg_list[i]); + } +} + +void exynos_dp_set_training_pattern(unsigned int pattern) +{ + u32 reg = 0; + + switch (pattern) { + case PRBS7: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7; + break; + case D10_2: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2; + break; + case TRAINING_PTN1: + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1; + break; + case TRAINING_PTN2: + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2; + break; + case DP_NONE: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_DISABLE | + SW_TRAINING_PATTERN_SET_NORMAL; + break; + default: + break; + } + + lwrite32(reg, &dp_regs->training_ptn_set); +} + +void exynos_dp_enable_enhanced_mode(unsigned char enable) +{ + u32 reg; + + reg = lread32(&dp_regs->sys_ctl4); + reg &= ~ENHANCED; + + if (enable) + reg |= ENHANCED; + + lwrite32(reg, &dp_regs->sys_ctl4); +} + +void exynos_dp_enable_scrambling(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->training_ptn_set); + reg &= ~(SCRAMBLING_DISABLE); + + if (!enable) + reg |= SCRAMBLING_DISABLE; + + lwrite32(reg, &dp_regs->training_ptn_set); +} +int exynos_dp_init_video(void) +{ + unsigned int reg; + + /* Clear VID_CLK_CHG[1] and VID_FORMAT_CHG[3] and VSYNC_DET[7] */ + reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; + lwrite32(reg, &dp_regs->common_int_sta1); + + /* I_STRM__CLK detect : DE_CTL : Auto detect */ + reg &= ~DET_CTRL; + lwrite32(reg, &dp_regs->sys_ctl1); + return 0; +} + + +void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info) +{ + u32 reg; + + /* Video Slave mode setting */ + reg = lread32(&dp_regs->func_en1); + reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); + reg |= MASTER_VID_FUNC_EN_N; + lwrite32(reg, &dp_regs->func_en1); + + /* Configure Interlaced for slave mode video */ + reg = lread32(&dp_regs->video_ctl10); + reg &= ~INTERACE_SCAN_CFG; + reg |= (video_info->interlaced << INTERACE_SCAN_CFG_SHIFT); + printk(BIOS_SPEW, "interlaced %d\n", video_info->interlaced); + lwrite32(reg, &dp_regs->video_ctl10); + + /* Configure V sync polarity for slave mode video */ + reg = lread32(&dp_regs->video_ctl10); + reg &= ~VSYNC_POLARITY_CFG; + reg |= (video_info->v_sync_polarity << V_S_POLARITY_CFG_SHIFT); + lwrite32(reg, &dp_regs->video_ctl10); + + /* Configure H sync polarity for slave mode video */ + reg = lread32(&dp_regs->video_ctl10); + reg &= ~HSYNC_POLARITY_CFG; + reg |= (video_info->h_sync_polarity << H_S_POLARITY_CFG_SHIFT); + lwrite32(reg, &dp_regs->video_ctl10); + + /*Set video mode to slave mode */ + reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; + lwrite32(reg, &dp_regs->soc_general_ctl); +} + +void exynos_dp_set_video_color_format(struct edp_video_info *video_info) +{ + u32 reg; + + /* Configure the input color depth, color space, dynamic range */ + reg = (video_info->dynamic_range << IN_D_RANGE_SHIFT) | + (video_info->color_depth << IN_BPC_SHIFT) | + (video_info->color_space << IN_COLOR_F_SHIFT); + lwrite32(reg, &dp_regs->video_ctl2); + + /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ + reg = lread32(&dp_regs->video_ctl3); + reg &= ~IN_YC_COEFFI_MASK; + if (video_info->ycbcr_coeff) + reg |= IN_YC_COEFFI_ITU709; + else + reg |= IN_YC_COEFFI_ITU601; + lwrite32(reg, &dp_regs->video_ctl3); +} + +unsigned int exynos_dp_is_slave_video_stream_clock_on(void) +{ + u32 reg; + + /* Update Video stream clk detect status */ + reg = lread32(&dp_regs->sys_ctl1); + lwrite32(reg, &dp_regs->sys_ctl1); + + reg = lread32(&dp_regs->sys_ctl1); + + if (!(reg & DET_STA)) { + printk(BIOS_DEBUG, "DP Input stream clock not detected.\n"); + return -1; + } + + return EXYNOS_DP_SUCCESS; +} + +void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, + unsigned int n_value) +{ + u32 reg; + + if (type == REGISTER_M) { + reg = lread32(&dp_regs->sys_ctl4); + reg |= FIX_M_VID; + lwrite32(reg, &dp_regs->sys_ctl4); + reg = M_VID0_CFG(m_value); + lwrite32(reg, &dp_regs->m_vid0); + reg = M_VID1_CFG(m_value); + lwrite32(reg, &dp_regs->m_vid1); + reg = M_VID2_CFG(m_value); + lwrite32(reg, &dp_regs->m_vid2); + + reg = N_VID0_CFG(n_value); + lwrite32(reg, &dp_regs->n_vid0); + reg = N_VID1_CFG(n_value); + lwrite32(reg, &dp_regs->n_vid1); + reg = N_VID2_CFG(n_value); + lwrite32(reg, &dp_regs->n_vid2); + } else { + reg = lread32(&dp_regs->sys_ctl4); + reg &= ~FIX_M_VID; + lwrite32(reg, &dp_regs->sys_ctl4); + } +} + +void exynos_dp_set_video_timing_mode(unsigned int type) +{ + u32 reg; + + reg = lread32(&dp_regs->video_ctl10); + reg &= ~FORMAT_SEL; + + if (type != VIDEO_TIMING_FROM_CAPTURE) + reg |= FORMAT_SEL; + + lwrite32(reg, &dp_regs->video_ctl10); +} + +void exynos_dp_enable_video_master(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->soc_general_ctl); + if (enable) { + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE; + } else { + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MODE_SLAVE_MODE; + } + + lwrite32(reg, &dp_regs->soc_general_ctl); +} + +void exynos_dp_start_video(void) +{ + u32 reg; + + /* Enable Video input and disable Mute */ + reg = lread32(&dp_regs->video_ctl1); + reg |= VIDEO_EN; + lwrite32(reg, &dp_regs->video_ctl1); +} + +unsigned int exynos_dp_is_video_stream_on(void) +{ + u32 reg; + + /* Update STRM_VALID */ + reg = lread32(&dp_regs->sys_ctl3); + lwrite32(reg, &dp_regs->sys_ctl3); + + reg = lread32(&dp_regs->sys_ctl3); + + if (!(reg & STRM_VALID)) + return -1; + + return EXYNOS_DP_SUCCESS; +} + +void dp_phy_control(unsigned int enable) +{ + u32 cfg; + struct exynos5_power *power = samsung_get_base_power(); + + cfg = lread32(&power->dptx_phy_control); + if (enable) + cfg |= EXYNOS_DP_PHY_ENABLE; + else + cfg &= ~EXYNOS_DP_PHY_ENABLE; + lwrite32(cfg, &power->dptx_phy_control); +} diff --git a/src/cpu/samsung/exynos5420/fb.c b/src/cpu/samsung/exynos5420/fb.c deleted file mode 100644 index 3724a247c6..0000000000 --- a/src/cpu/samsung/exynos5420/fb.c +++ /dev/null @@ -1,587 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * Copyright (C) 2012 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* LCD driver for Exynos */ - -#include -#include -#include -#include -#include -#include -#include "cpu.h" -#include "power.h" -#include "sysreg.h" -#include - -#include "device/i2c.h" -#include "i2c.h" -#include "fimd.h" -#include "dp.h" -#include "dp-core.h" - -/* - * Here is the rough outline of how we bring up the display: - * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD - * 2. Source determines video mode by reading DPCD receiver capability field - * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD - * 0000Dh). - * 3. Sink replies DPCD receiver capability field. - * 4. Source starts EDID read thru I2C-over-AUX. - * 5. Sink replies EDID thru I2C-over-AUX. - * 6. Source determines link configuration, such as MAX_LINK_RATE and - * MAX_LANE_COUNT. Source also determines which type of eDP Authentication - * method to use and writes DPCD link configuration field (DPCD 00100h to - * 0010Ah) including eDP configuration set (DPCD 0010Ah). - * 7. Source starts link training. Sink does clock recovery and equalization. - * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). - * 9. Sink replies DPCD link status field. If main link is not stable, Source - * repeats Step 7. - * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video - * parameters and recovers stream clock. - * 11. Source sends video data. - */ - -/* To help debug any init errors here, define a list of possible errors */ -enum { - ERR_PLL_NOT_UNLOCKED = 2, - ERR_VIDEO_CLOCK_BAD, - ERR_VIDEO_STREAM_BAD, - ERR_DPCD_READ_ERROR1, /* 5 */ - - ERR_DPCD_WRITE_ERROR1, - ERR_DPCD_READ_ERROR2, - ERR_DPCD_WRITE_ERROR2, - ERR_INVALID_LANE, - ERR_PLL_NOT_LOCKED, /* 10 */ - - ERR_PRE_EMPHASIS_LEVELS, - ERR_LINK_RATE_ABNORMAL, - ERR_MAX_LANE_COUNT_ABNORMAL, - ERR_LINK_TRAINING_FAILURE, - ERR_MISSING_DP_BASE, /* 15 */ - - ERR_NO_FDT_NODE, -}; -/* ok, this is stupid, but we're going to leave the variables in here until we - * know it works. One cleanup task at a time. - */ -enum stage_t { - STAGE_START = 0, - STAGE_LCD_VDD, - STAGE_BRIDGE_SETUP, - STAGE_BRIDGE_INIT, - STAGE_BRIDGE_RESET, - STAGE_HOTPLUG, - STAGE_DP_CONTROLLER, - STAGE_BACKLIGHT_VDD, - STAGE_BACKLIGHT_PWM, - STAGE_BACKLIGHT_EN, - STAGE_DONE, -}; - -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; - -void *lcd_console_address; /* Start of console buffer */ - -short console_col; -short console_row; - -/* Bypass FIMD of DISP1_BLK */ -static void fimd_bypass(void) -{ - struct exynos5_sysreg *sysreg = samsung_get_base_sysreg(); - - setbits_le32(&sysreg->disp1blk_cfg, FIMDBYPASS_DISP1); - sysreg->disp1blk_cfg &= ~FIMDBYPASS_DISP1; -} - -/* - * Initialize display controller. - * - * @param lcdbase pointer to the base address of framebuffer. - * @pd pointer to the main panel_data structure - */ -void fb_init(unsigned long int fb_size, void *lcdbase, - struct exynos5_fimd_panel *pd) -{ - unsigned int val; - struct exynos5_fimd *fimd = samsung_get_base_fimd(); - struct exynos5_disp_ctrl *disp_ctrl = samsung_get_base_disp_ctrl(); - - fb_size = ALIGN(fb_size, 4096); - - writel(pd->ivclk | pd->fixvclk, &disp_ctrl->vidcon1); - val = ENVID_ON | ENVID_F_ON | (pd->clkval_f << CLKVAL_F_OFFSET); - writel(val, &fimd->vidcon0); - - val = (pd->vsync << VSYNC_PULSE_WIDTH_OFFSET) | - (pd->lower_margin << V_FRONT_PORCH_OFFSET) | - (pd->upper_margin << V_BACK_PORCH_OFFSET); - writel(val, &disp_ctrl->vidtcon0); - - val = (pd->hsync << HSYNC_PULSE_WIDTH_OFFSET) | - (pd->right_margin << H_FRONT_PORCH_OFFSET) | - (pd->left_margin << H_BACK_PORCH_OFFSET); - writel(val, &disp_ctrl->vidtcon1); - - val = ((pd->xres - 1) << HOZVAL_OFFSET) | - ((pd->yres - 1) << LINEVAL_OFFSET); - writel(val, &disp_ctrl->vidtcon2); - - writel((unsigned int)lcdbase, &fimd->vidw00add0b0); - writel((unsigned int)lcdbase + fb_size, &fimd->vidw00add1b0); - - writel(pd->xres * 2, &fimd->vidw00add2); - - val = ((pd->xres - 1) << OSD_RIGHTBOTX_F_OFFSET); - val |= ((pd->yres - 1) << OSD_RIGHTBOTY_F_OFFSET); - writel(val, &fimd->vidosd0b); - writel(pd->xres * pd->yres, &fimd->vidosd0c); - - setbits_le32(&fimd->shadowcon, CHANNEL0_EN); - - val = BPPMODE_F_RGB_16BIT_565 << BPPMODE_F_OFFSET; - val |= ENWIN_F_ENABLE | HALF_WORD_SWAP_EN; - writel(val, &fimd->wincon0); - - /* DPCLKCON_ENABLE */ - writel(1 << 1, &fimd->dpclkcon); -} - -#ifdef UNUSED_CODE -void exynos_fimd_disable(void) -{ - struct exynos5_fimd *fimd = samsung_get_base_fimd(); - - writel(0, &fimd->wincon0); - clrbits_le32(&fimd->shadowcon, CHANNEL0_EN); -} -#endif - -/* - * Configure DP in slave mode and wait for video stream. - * - * param dp pointer to main s5p-dp structure - * param video_info pointer to main video_info structure. - * return status - */ -static int s5p_dp_config_video(struct s5p_dp_device *dp, - struct video_info *video_info) -{ - int timeout = 0; - struct exynos5_dp *base = dp->base; - struct mono_time start, current, end; - s5p_dp_config_video_slave_mode(dp, video_info); - - s5p_dp_set_video_color_format(dp, video_info->color_depth, - video_info->color_space, - video_info->dynamic_range, - video_info->ycbcr_coeff); - - if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - printk(BIOS_DEBUG, "PLL is not locked yet.\n"); - return -ERR_PLL_NOT_UNLOCKED; - } - - timer_monotonic_get(&start); - end = current = start; - mono_time_add_usecs(&end, STREAM_ON_TIMEOUT * USECS_PER_MSEC); - do { - if (s5p_dp_is_slave_video_stream_clock_on(dp) == 0) { - timeout++; - break; - } - timer_monotonic_get(¤t); - } while (mono_time_before(¤t, &end)); - - if (!timeout) { - printk(BIOS_ERR, "Video Clock Not ok after %ldus.\n", - mono_time_diff_microseconds(&start, &end)); - return -ERR_VIDEO_CLOCK_BAD; - } - - /* Set to use the register calculated M/N video */ - s5p_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0); - - clrbits_le32(&base->video_ctl_10, FORMAT_SEL); - - /* Disable video mute */ - clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE); - - /* Configure video slave mode */ - s5p_dp_enable_video_master(dp); - - /* Enable video */ - setbits_le32(&base->video_ctl_1, VIDEO_EN); - timeout = s5p_dp_is_video_stream_on(dp); - - if (timeout) { - printk(BIOS_DEBUG, "Video Stream Not on\n"); - return -ERR_VIDEO_STREAM_BAD; - } - - return 0; -} - -/* - * Set DP to enhanced mode. We use this for EVT1 - * param dp pointer to main s5p-dp structure - * return status - */ -static int s5p_dp_enable_rx_to_enhanced_mode(struct s5p_dp_device *dp) -{ - u8 data; - - if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data)) { - printk(BIOS_DEBUG, "DPCD read error\n"); - return -ERR_DPCD_READ_ERROR1; - } - if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, - DPCD_ENHANCED_FRAME_EN | - (data & DPCD_LANE_COUNT_SET_MASK))) { - printk(BIOS_DEBUG, "DPCD write error\n"); - return -ERR_DPCD_WRITE_ERROR1; - } - - return 0; -} - -/* - * Enable scrambles mode. We use this for EVT1 - * param dp pointer to main s5p-dp structure - * return status - */ -static int s5p_dp_enable_scramble(struct s5p_dp_device *dp) -{ - u8 data; - struct exynos5_dp *base = dp->base; - - clrbits_le32(&base->dp_training_ptn_set, SCRAMBLING_DISABLE); - - if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET, - &data)) { - printk(BIOS_DEBUG, "DPCD read error\n"); - return -ERR_DPCD_READ_ERROR2; - } - - if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET, - (u8)(data & ~DPCD_SCRAMBLING_DISABLED))) { - printk(BIOS_DEBUG, "DPCD write error\n"); - return -ERR_DPCD_WRITE_ERROR2; - } - - return 0; -} - -/* - * Reset DP and prepare DP for init training - * param dp pointer to main s5p-dp structure - */ -static int s5p_dp_init_dp(struct s5p_dp_device *dp) -{ - int ret, i; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < DP_INIT_TRIES; i++) { - s5p_dp_reset(dp); - - /* SW defined function Normal operation */ - clrbits_le32(&base->func_en_1, SW_FUNC_EN_N); - - ret = s5p_dp_init_analog_func(dp); - if (!ret) - break; - - udelay(5000); - printk(BIOS_DEBUG, "LCD retry init, attempt=%d ret=%d\n", i, ret); - } - if (i == DP_INIT_TRIES) { - printk(BIOS_DEBUG, "LCD initialization failed, ret=%d\n", ret); - return ret; - } - - s5p_dp_init_aux(dp); - - return ret; -} - -/* - * Set pre-emphasis level - * param dp pointer to main s5p-dp structure - * param pre_emphasis pre-emphasis level - * param lane lane number(0 - 3) - * return status - */ -static int s5p_dp_set_lane_lane_pre_emphasis(struct s5p_dp_device *dp, - int pre_emphasis, int lane) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = pre_emphasis << PRE_EMPHASIS_SET_SHIFT; - switch (lane) { - case 0: - writel(reg, &base->ln0_link_trn_ctl); - break; - case 1: - writel(reg, &base->ln1_link_trn_ctl); - break; - - case 2: - writel(reg, &base->ln2_link_trn_ctl); - break; - - case 3: - writel(reg, &base->ln3_link_trn_ctl); - break; - default: - printk(BIOS_DEBUG, "%s: Invalid lane %d\n", __func__, lane); - return -ERR_INVALID_LANE; - } - return 0; -} - -/* - * Read supported bandwidth type - * param dp pointer to main s5p-dp structure - * param bandwidth pointer to variable holding bandwidth type - */ -static void s5p_dp_get_max_rx_bandwidth(struct s5p_dp_device *dp, - u8 *bandwidth) -{ - u8 data; - - /* - * For DP rev.1.1, Maximum link rate of Main Link lanes - * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps - */ - s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data); - *bandwidth = data; -} - -/* - * Reset DP and prepare DP for init training - * param dp pointer to main s5p-dp structure - * param lane_count pointer to variable holding no of lanes - */ -static void s5p_dp_get_max_rx_lane_count(struct s5p_dp_device *dp, - u8 *lane_count) -{ - u8 data; - - /* - * For DP rev.1.1, Maximum number of Main Link lanes - * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes - */ - s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data); - *lane_count = data & DPCD_MAX_LANE_COUNT_MASK; -} - -/* - * DP H/w Link Training. Set DPCD link rate and bandwidth. - * param dp pointer to main s5p-dp structure - * param max_lane No of lanes - * param max_rate bandwidth - * return status - */ -static int s5p_dp_hw_link_training(struct s5p_dp_device *dp, - unsigned int max_lane, - unsigned int max_rate) -{ - int pll_is_locked = 0; - u32 data; - int lane; - struct mono_time current, end; - struct exynos5_dp *base = dp->base; - - /* Stop Video */ - clrbits_le32(&base->video_ctl_1, VIDEO_EN); - - timer_monotonic_get(¤t); - end = current; - mono_time_add_msecs(&end, PLL_LOCK_TIMEOUT); - - while ((pll_is_locked = s5p_dp_get_pll_lock_status(dp)) == PLL_UNLOCKED) { - if (mono_time_after(¤t, &end)) { - /* Ignore this error, and try to continue */ - printk(BIOS_ERR, "PLL is not locked yet.\n"); - break; - } - timer_monotonic_get(¤t); - } - printk(BIOS_SPEW, "PLL is %slocked\n", - pll_is_locked == PLL_LOCKED ? "": "not "); - /* Reset Macro */ - setbits_le32(&base->dp_phy_test, MACRO_RST); - - /* 10 us is the minimum reset time. */ - udelay(10); - - clrbits_le32(&base->dp_phy_test, MACRO_RST); - - /* Set TX pre-emphasis to minimum */ - for (lane = 0; lane < max_lane; lane++) - if (s5p_dp_set_lane_lane_pre_emphasis(dp, - PRE_EMPHASIS_LEVEL_0, lane)) { - printk(BIOS_DEBUG, "Unable to set pre emphasis level\n"); - return -ERR_PRE_EMPHASIS_LEVELS; - } - - /* All DP analog module power up */ - writel(0x00, &base->dp_phy_pd); - - /* Initialize by reading RX's DPCD */ - s5p_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate); - s5p_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); - - printk(BIOS_SPEW, "%s: rate 0x%x, lane_count %d\n", __func__, - dp->link_train.link_rate, dp->link_train.lane_count); - - if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) && - (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) { - printk(BIOS_DEBUG, "Rx Max Link Rate is abnormal :%x !\n", - dp->link_train.link_rate); - /* Not Retrying */ - return -ERR_LINK_RATE_ABNORMAL; - } - - if (dp->link_train.lane_count == 0) { - printk(BIOS_DEBUG, "Rx Max Lane count is abnormal :%x !\n", - dp->link_train.lane_count); - /* Not retrying */ - return -ERR_MAX_LANE_COUNT_ABNORMAL; - } - - /* Setup TX lane count & rate */ - if (dp->link_train.lane_count > max_lane) - dp->link_train.lane_count = max_lane; - if (dp->link_train.link_rate > max_rate) - dp->link_train.link_rate = max_rate; - - /* Set link rate and count as you want to establish*/ - writel(dp->link_train.lane_count, &base->lane_count_set); - writel(dp->link_train.link_rate, &base->link_bw_set); - - /* Set sink to D0 (Sink Not Ready) mode. */ - s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE, - DPCD_SET_POWER_STATE_D0); - - /* Start HW link training */ - writel(HW_TRAINING_EN, &base->dp_hw_link_training); - - /* Wait until HW link training done */ - s5p_dp_wait_hw_link_training_done(dp); - - /* Get hardware link training status */ - data = readl(&base->dp_hw_link_training); - printk(BIOS_SPEW, "hardware link training status: 0x%08x\n", data); - if (data != 0) { - printk(BIOS_ERR, " H/W link training failure: 0x%x\n", data); - return -ERR_LINK_TRAINING_FAILURE; - } - - /* Get Link Bandwidth */ - data = readl(&base->link_bw_set); - - dp->link_train.link_rate = data; - - data = readl(&base->lane_count_set); - dp->link_train.lane_count = data; - printk(BIOS_SPEW, "Done training: Link bandwidth: 0x%x, lane_count: %d\n", - dp->link_train.link_rate, data); - - return 0; -} - -/* - * Initialize DP display - */ -int dp_controller_init(struct s5p_dp_device *dp_device) -{ - int ret; - struct s5p_dp_device *dp = dp_device; - struct exynos5_dp *base; - - clock_init_dp_clock(); - - power_enable_dp_phy(); - ret = s5p_dp_init_dp(dp); - if (ret) { - printk(BIOS_ERR, "%s: Could not initialize dp\n", __func__); - return ret; - } - - ret = s5p_dp_hw_link_training(dp, dp->video_info->lane_count, - dp->video_info->link_rate); - if (ret) { - printk(BIOS_ERR, "unable to do link train\n"); - return ret; - } - /* Minimum delay after H/w Link training */ - udelay(1000); - - ret = s5p_dp_enable_scramble(dp); - if (ret) { - printk(BIOS_ERR, "unable to set scramble mode\n"); - return ret; - } - - ret = s5p_dp_enable_rx_to_enhanced_mode(dp); - if (ret) { - printk(BIOS_ERR, "unable to set enhanced mode\n"); - return ret; - } - - - base = dp->base; - /* Enable enhanced mode */ - setbits_le32(&base->sys_ctl_4, ENHANCED); - - writel(dp->link_train.lane_count, &base->lane_count_set); - writel(dp->link_train.link_rate, &base->link_bw_set); - - s5p_dp_init_video(dp); - ret = s5p_dp_config_video(dp, dp->video_info); - if (ret) { - printk(BIOS_ERR, "unable to config video\n"); - return ret; - } - - return 0; -} - -/** - * Init the LCD controller - * - * @param lcdbase Base address of LCD frame buffer - * @return 0 if ok, -ve error code on error - */ -int lcd_ctrl_init(unsigned long int fb_size, - struct exynos5_fimd_panel *panel_data, void *lcdbase) -{ - int ret = 0; - - fimd_bypass(); - fb_init(fb_size, lcdbase, panel_data); - return ret; -} diff --git a/src/cpu/samsung/exynos5420/fimd.c b/src/cpu/samsung/exynos5420/fimd.c new file mode 100644 index 0000000000..b94148a6b1 --- /dev/null +++ b/src/cpu/samsung/exynos5420/fimd.c @@ -0,0 +1,450 @@ +/* + * Copyright 2013 Google Inc. + * Copyright (C) 2012 Samsung Electronics + * + * Author: InKi Dae + * Author: Donghwa Lee + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include "timer.h" +#include "clk.h" +#include "cpu.h" +#include "periph.h" +#include "dp.h" +#include "fimd.h" +#include "sysreg.h" + +/* left here because it's a counterexample of good style. u-boot + * likes to call a function to get a base address. To get that they + * walk the device tree several times. It's costly. So they turn a + * known-at-build-time constant into a bunch of function calls. What + * to do about this inefficiency? Fix the inefficiency? No, scarf + * variables away in global memory of course, and remove all hope of + * optimization. Bad idea. + * + * the u-boot sources that define fimd base are ... bizarre. I'm going + * with a hardcoded hack until we get this working. FIXME. + * + * static struct exynos_fb *fimd_ctrl * = + * (void *)0x14400000; //samsung_get_base_fimd(); + */ + +/* fairly useful debugging stuff. */ +#if 0 +static inline void fwadl(unsigned long l,void *v) { + writel(l, v); + printk(BIOS_SPEW, "W %p %p\n", v, (void *)l); +} +#define lwritel(a,b) fwadl((unsigned long)(a), (void *)(b)) + +static inline unsigned long fradl(void *v) { + unsigned long l = readl(v); + printk(BIOS_SPEW, "R %p %p\n", v, (void *)l); + return l; +} + +#define lreadl(a) fradl((void *)(a)) + +#else +#define lwritel(a,b) writel((unsigned long)(a), (void *)(b)) +#define lreadl(a) readl((void *)(a)) +#endif + +/* not sure where we want this so ... */ +static unsigned long get_lcd_clk(void) +{ + struct exynos5420_clock *clk = samsung_get_base_clock(); + u32 pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_DISP10 + * CLKMUX_FIMD1 [4] + * 0: SCLK_RPLL + * 1: SCLK_SPLL + */ + sel = lreadl(&clk->clk_src_disp10); + sel &= (1 << 4); + + if (sel){ + sclk = get_pll_clk(SPLL); + } else { + sclk = get_pll_clk(RPLL); + } + + /* + * CLK_DIV_DISP10 + * FIMD1_RATIO [3:0] + */ + ratio = lreadl(&clk->clk_div_disp10); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + +static void exynos_fimd_set_dualrgb(vidinfo_t *vid, unsigned int enabled) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s %s\n", __func__, enabled ? "enabled" : "not enabled"); + if (enabled) { + cfg = EXYNOS_DUALRGB_BYPASS_DUAL | EXYNOS_DUALRGB_LINESPLIT | + EXYNOS_DUALRGB_VDEN_EN_ENABLE; + + /* in case of Line Split mode, MAIN_CNT doesn't neet to set. */ + cfg |= EXYNOS_DUALRGB_SUB_CNT(vid->vl_col / 2) | + EXYNOS_DUALRGB_MAIN_CNT(0); + } + + lwritel(cfg, &FIMD_CTRL->dualrgb); +} + +static void exynos_fimd_set_dp_clkcon(unsigned int enabled) +{ + unsigned int cfg = 0; + + if (enabled){ + cfg = EXYNOS_DP_CLK_ENABLE; + } + + lwritel(cfg, &FIMD_CTRL->dp_mie_clkcon); +} + +static void exynos_fimd_set_par(vidinfo_t *vid, unsigned int win_id) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s %d\n", __func__, win_id); + /* set window control */ + cfg = lreadl(&FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg &= ~(EXYNOS_WINCON_BITSWP_ENABLE | EXYNOS_WINCON_BYTESWP_ENABLE | + EXYNOS_WINCON_HAWSWP_ENABLE | EXYNOS_WINCON_WSWP_ENABLE | + EXYNOS_WINCON_BURSTLEN_MASK | EXYNOS_WINCON_BPPMODE_MASK | + EXYNOS_WINCON_INRGB_MASK | EXYNOS_WINCON_DATAPATH_MASK); + + /* DATAPATH is DMA */ + cfg |= EXYNOS_WINCON_DATAPATH_DMA; + + cfg |= EXYNOS_WINCON_HAWSWP_ENABLE; + + /* dma burst is 16 */ + cfg |= EXYNOS_WINCON_BURSTLEN_16WORD; + + cfg |= EXYNOS_WINCON_BPPMODE_16BPP_565; + + lwritel(cfg, &FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + + /* set window position to x=0, y=0*/ + cfg = EXYNOS_VIDOSD_LEFT_X(0) | EXYNOS_VIDOSD_TOP_Y(0); + lwritel(cfg, &FIMD_CTRL->vidosd0a + + EXYNOS_VIDOSD(win_id)); + + cfg = EXYNOS_VIDOSD_RIGHT_X(vid->vl_col - 1) | + EXYNOS_VIDOSD_BOTTOM_Y(vid->vl_row - 1) | + EXYNOS_VIDOSD_RIGHT_X_E(1) | + EXYNOS_VIDOSD_BOTTOM_Y_E(0); + + lwritel(cfg, &FIMD_CTRL->vidosd0b + + EXYNOS_VIDOSD(win_id)); + /* set window size for window0*/ + cfg = EXYNOS_VIDOSD_SIZE(vid->vl_col * vid->vl_row); + lwritel(cfg, &FIMD_CTRL->vidosd0c + + EXYNOS_VIDOSD(win_id)); +} + +static void exynos_fimd_set_buffer_address(vidinfo_t *vid, + void *screen_base, int win_id) +{ + u32 start_addr, end_addr; + printk(BIOS_SPEW, "%s %d\n", __func__, win_id); + start_addr = (u32)screen_base; + end_addr = start_addr + ((vid->vl_col * ((1<vl_bpix) / 8)) * + vid->vl_row); + + lwritel(start_addr, &FIMD_CTRL->vidw00add0b0 + + EXYNOS_BUFFER_OFFSET(win_id)); + lwritel(end_addr, &FIMD_CTRL->vidw00add1b0 + + EXYNOS_BUFFER_OFFSET(win_id)); +} + +static void exynos_fimd_set_clock(vidinfo_t *vid) +{ + unsigned int cfg = 0, div = 0, remainder = 0, remainder_div; + unsigned long pixel_clock; + unsigned long long src_clock; + printk(BIOS_SPEW, "%s\n", __func__); + if (vid->dual_lcd_enabled) { + pixel_clock = vid->vl_freq * + (vid->vl_hspw + vid->vl_hfpd + + vid->vl_hbpd + vid->vl_col / 2) * + (vid->vl_vspw + vid->vl_vfpd + + vid->vl_vbpd + vid->vl_row); + } else if (vid->interface_mode == FIMD_CPU_INTERFACE) { + pixel_clock = vid->vl_freq * + vid->vl_width * vid->vl_height * + (vid->cs_setup + vid->wr_setup + + vid->wr_act + vid->wr_hold + 1); + } else { + pixel_clock = vid->vl_freq * + (vid->vl_hspw + vid->vl_hfpd + + vid->vl_hbpd + vid->vl_col) * + (vid->vl_vspw + vid->vl_vfpd + + vid->vl_vbpd + vid->vl_row); + } + printk(BIOS_SPEW, "Pixel clock is %lx\n", pixel_clock); + + cfg = lreadl(&FIMD_CTRL->vidcon0); + cfg &= ~(EXYNOS_VIDCON0_CLKSEL_MASK | EXYNOS_VIDCON0_CLKVALUP_MASK | + EXYNOS_VIDCON0_CLKVAL_F(0xFF) | EXYNOS_VIDCON0_VCLKEN_MASK | + EXYNOS_VIDCON0_CLKDIR_MASK); + cfg |= (EXYNOS_VIDCON0_CLKSEL_SCLK | EXYNOS_VIDCON0_CLKVALUP_ALWAYS | + EXYNOS_VIDCON0_VCLKEN_NORMAL | EXYNOS_VIDCON0_CLKDIR_DIVIDED); + + src_clock = (unsigned long long) get_lcd_clk(); + + /* get quotient and remainder. */ + remainder = src_clock % pixel_clock; + src_clock /= pixel_clock; + + div = src_clock; + + remainder *= 10; + remainder_div = remainder / pixel_clock; + + /* round about one places of decimals. */ + if (remainder_div >= 5) + div++; + + /* in case of dual lcd mode. */ + if (vid->dual_lcd_enabled) + div--; + + cfg |= EXYNOS_VIDCON0_CLKVAL_F(div - 1); + lwritel(cfg, &FIMD_CTRL->vidcon0); +} + +void exynos_set_trigger(void) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s\n", __func__); + cfg = lreadl(&FIMD_CTRL->trigcon); + + cfg |= (EXYNOS_I80SOFT_TRIG_EN | EXYNOS_I80START_TRIG); + + lwritel(cfg, &FIMD_CTRL->trigcon); +} + +int exynos_is_i80_frame_done(void) +{ + unsigned int cfg = 0; + int status; + printk(BIOS_SPEW, "%s\n", __func__); + cfg = lreadl(&FIMD_CTRL->trigcon); + + /* frame done func is valid only when TRIMODE[0] is set to 1. */ + status = (cfg & EXYNOS_I80STATUS_TRIG_DONE) == + EXYNOS_I80STATUS_TRIG_DONE; + + return status; +} + +static void exynos_fimd_lcd_on(void) +{ + unsigned int cfg = 0; + + printk(BIOS_SPEW, "%s\n", __func__); + /* display on */ + cfg = lreadl(&FIMD_CTRL->vidcon0); + cfg |= (EXYNOS_VIDCON0_ENVID_ENABLE | EXYNOS_VIDCON0_ENVID_F_ENABLE); + lwritel(cfg, &FIMD_CTRL->vidcon0); +} + +static void exynos_fimd_window_on(unsigned int win_id) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s %d\n", __func__, win_id); + /* enable window */ + cfg = lreadl(&FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + cfg |= EXYNOS_WINCON_ENWIN_ENABLE; + lwritel(cfg, &FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg = lreadl(&FIMD_CTRL->winshmap); + cfg |= EXYNOS_WINSHMAP_CH_ENABLE(win_id); + lwritel(cfg, &FIMD_CTRL->winshmap); + cfg = lreadl(&FIMD_CTRL->winshmap); +} + +void exynos_fimd_lcd_off(void) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s\n", __func__); + + cfg = lreadl(&FIMD_CTRL->vidcon0); + cfg &= (EXYNOS_VIDCON0_ENVID_DISABLE | EXYNOS_VIDCON0_ENVID_F_DISABLE); + lwritel(cfg, &FIMD_CTRL->vidcon0); +} + +void exynos_fimd_window_off(unsigned int win_id) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s %d\n", __func__, win_id); + + cfg = lreadl(&FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + cfg &= EXYNOS_WINCON_ENWIN_DISABLE; + lwritel(cfg, &FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg = lreadl(&FIMD_CTRL->winshmap); + cfg &= ~EXYNOS_WINSHMAP_CH_DISABLE(win_id); + lwritel(cfg, &FIMD_CTRL->winshmap); +} + +static void exynos5_set_system_display(void) +{ + struct exynos5_sysreg *sysreg = samsung_get_base_sysreg(); + unsigned int cfg = 0; + + /* + * system register path set + * 0: MIE/MDNIE + * 1: FIMD Bypass + */ + cfg = lreadl(&sysreg->disp1blk_cfg); + cfg |= (1 << 15); + lwritel(cfg, &sysreg->disp1blk_cfg); +} + +void exynos_fimd_lcd_init(vidinfo_t *vid) +{ + unsigned int cfg = 0, rgb_mode; + unsigned int offset; + + offset = exynos_fimd_get_base_offset(); + printk(BIOS_SPEW, "%s\n", __func__); + exynos5_set_system_display(); + + rgb_mode = vid->rgb_mode; + + if (vid->interface_mode == FIMD_RGB_INTERFACE) { + printk(BIOS_SPEW, "%s FIMD_RGB_INTERFACE\n", __func__); + + cfg |= EXYNOS_VIDCON0_VIDOUT_RGB; + lwritel(cfg, &FIMD_CTRL->vidcon0); + + cfg = lreadl(&FIMD_CTRL->vidcon2); + cfg &= ~(EXYNOS_VIDCON2_WB_MASK | + EXYNOS_VIDCON2_TVFORMATSEL_MASK | + EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK); + cfg |= EXYNOS_VIDCON2_WB_DISABLE; + lwritel(cfg, &FIMD_CTRL->vidcon2); + + /* set polarity */ + cfg = 0; + if (!vid->vl_clkp) + cfg |= EXYNOS_VIDCON1_IVCLK_RISING_EDGE; + if (!vid->vl_hsp) + cfg |= EXYNOS_VIDCON1_IHSYNC_INVERT; + if (!vid->vl_vsp) + cfg |= EXYNOS_VIDCON1_IVSYNC_INVERT; + if (!vid->vl_dp) + cfg |= EXYNOS_VIDCON1_IVDEN_INVERT; + + lwritel(cfg, &FIMD_CTRL->vidcon1 + offset); + + /* set timing */ + cfg = EXYNOS_VIDTCON0_VFPD(vid->vl_vfpd - 1); + cfg |= EXYNOS_VIDTCON0_VBPD(vid->vl_vbpd - 1); + cfg |= EXYNOS_VIDTCON0_VSPW(vid->vl_vspw - 1); + lwritel(cfg, &FIMD_CTRL->vidtcon0 + offset); + + cfg = EXYNOS_VIDTCON1_HFPD(vid->vl_hfpd - 1); + cfg |= EXYNOS_VIDTCON1_HBPD(vid->vl_hbpd - 1); + cfg |= EXYNOS_VIDTCON1_HSPW(vid->vl_hspw - 1); + + lwritel(cfg, &FIMD_CTRL->vidtcon1 + offset); + + /* set lcd size */ + cfg = EXYNOS_VIDTCON2_HOZVAL(vid->vl_col - 1) | + EXYNOS_VIDTCON2_LINEVAL(vid->vl_row - 1) | + EXYNOS_VIDTCON2_HOZVAL_E(vid->vl_col - 1) | + EXYNOS_VIDTCON2_LINEVAL_E(vid->vl_row - 1); + + lwritel(cfg, &FIMD_CTRL->vidtcon2 + offset); + } + + /* set display mode */ + cfg = lreadl(&FIMD_CTRL->vidcon0); + cfg &= ~EXYNOS_VIDCON0_PNRMODE_MASK; + cfg |= (rgb_mode << EXYNOS_VIDCON0_PNRMODE_SHIFT); + lwritel(cfg, &FIMD_CTRL->vidcon0); + + /* set par */ + exynos_fimd_set_par(vid, vid->win_id); + + /* set memory address */ + exynos_fimd_set_buffer_address(vid, vid->screen_base, vid->win_id); + + /* set buffer size */ + cfg = EXYNOS_VIDADDR_PAGEWIDTH(vid->vl_col * (1<vl_bpix) / 8) | + EXYNOS_VIDADDR_PAGEWIDTH_E(vid->vl_col * (1<vl_bpix) / 8) | + EXYNOS_VIDADDR_OFFSIZE(0) | + EXYNOS_VIDADDR_OFFSIZE_E(0); + + lwritel(cfg, &FIMD_CTRL->vidw00add2 + + EXYNOS_BUFFER_SIZE(vid->win_id)); + + /* set clock */ + exynos_fimd_set_clock(vid); + + /* set rgb mode to dual lcd. */ + exynos_fimd_set_dualrgb(vid, vid->dual_lcd_enabled); + + /* display on */ + exynos_fimd_lcd_on(); + + /* window on */ + exynos_fimd_window_on(vid->win_id); + + exynos_fimd_set_dp_clkcon(vid->dp_enabled); + exynos5_set_system_display(); + printk(BIOS_SPEW, "%s: done\n", __func__); +} + +unsigned long exynos_fimd_calc_fbsize(vidinfo_t *vid) +{ + printk(BIOS_SPEW, "%s\n", __func__); + return vid->vl_col * vid->vl_row * ((1<vl_bpix) / 8); +} + +void exynos_fimd_lcd_disable(void) +{ + int i; + printk(BIOS_SPEW, "%s\n", __func__); + + for (i = 0; i < 4; i++) + exynos_fimd_window_off(i); +} diff --git a/src/cpu/samsung/exynos5420/fimd.h b/src/cpu/samsung/exynos5420/fimd.h index 661ed9ec6f..7d6897958b 100644 --- a/src/cpu/samsung/exynos5420/fimd.h +++ b/src/cpu/samsung/exynos5420/fimd.h @@ -25,39 +25,39 @@ /* FIMD register map */ struct exynos5_fimd { /* This is an incomplete list. Add registers as and when required */ - unsigned int vidcon0; - unsigned char res1[0x1c]; - unsigned int wincon0; - unsigned int wincon1; - unsigned int wincon2; - unsigned int wincon3; - unsigned int wincon4; - unsigned int shadowcon; - unsigned char res2[0x8]; - unsigned int vidosd0a; - unsigned int vidosd0b; - unsigned int vidosd0c; - unsigned char res3[0x54]; - unsigned int vidw00add0b0; - unsigned char res4[0x2c]; - unsigned int vidw00add1b0; - unsigned char res5[0x2c]; - unsigned int vidw00add2; - unsigned char res6[0x3c]; - unsigned int w1keycon0; - unsigned int w1keycon1; - unsigned int w2keycon0; - unsigned int w2keycon1; - unsigned int w3keycon0; - unsigned int w3keycon1; - unsigned int w4keycon0; - unsigned int w4keycon1; - unsigned char res7[0x20]; - unsigned int win0map; - unsigned char res8[0xdc]; - unsigned int blendcon; - unsigned char res9[0x18]; - unsigned int dpclkcon; + u32 vidcon0; + u8 res1[0x1c]; + u32 wincon0; + u32 wincon1; + u32 wincon2; + u32 wincon3; + u32 wincon4; + u32 shadowcon; + u8 res2[0x8]; + u32 vidosd0a; + u32 vidosd0b; + u32 vidosd0c; + u8 res3[0x54]; + u32 vidw00add0b0; + u8 res4[0x2c]; + u32 vidw00add1b0; + u8 res5[0x2c]; + u32 vidw00add2; + u8 res6[0x3c]; + u32 w1keycon0; + u32 w1keycon1; + u32 w2keycon0; + u32 w2keycon1; + u32 w3keycon0; + u32 w3keycon1; + u32 w4keycon0; + u32 w4keycon1; + u8 res7[0x20]; + u32 win0map; + u8 res8[0xdc]; + u32 blendcon; + u8 res9[0x18]; + u32 dpclkcon; }; #define W0_SHADOW_PROTECT (0x1 << 10) @@ -86,7 +86,7 @@ struct exynos5_fimd_panel { unsigned int upper_margin; /* Vertical Backporch */ unsigned int lower_margin; /* Vertical frontporch */ unsigned int vsync; /* Vertical Sync Pulse Width */ - unsigned int left_margin; /* Horizantal Backporch */ + unsigned int left_margin; /* Horizontal Backporch */ unsigned int right_margin; /* Horizontal Frontporch */ unsigned int hsync; /* Horizontal Sync Pulse Width */ unsigned int xres; /* X Resolution */ @@ -95,15 +95,15 @@ struct exynos5_fimd_panel { /* LCDIF Register Map */ struct exynos5_disp_ctrl { - unsigned int vidout_con; - unsigned int vidcon1; - unsigned char res1[0x8]; - unsigned int vidtcon0; - unsigned int vidtcon1; - unsigned int vidtcon2; - unsigned int vidtcon3; - unsigned char res2[0x184]; - unsigned int trigcon; + u32 vidout_con; + u32 vidcon1; + u8 res1[0x8]; + u32 vidtcon0; + u32 vidtcon1; + u32 vidtcon2; + u32 vidtcon3; + u8 res2[0x184]; + u32 trigcon; }; #define VCLK_RISING_EDGE (1 << 7) @@ -135,4 +135,79 @@ struct exynos5_disp_ctrl { #define OSD_RIGHTBOTX_F_OFFSET 11 #define OSD_RIGHTBOTY_F_OFFSET 0 + +#define FIMD_CTRL ((struct exynos_fb *)0x14400000) + +/* from u-boot fb.h. It needs to be merged with these dp structs maybe. */ +enum { + FIMD_RGB_INTERFACE = 1, + FIMD_CPU_INTERFACE = 2, +}; + +enum exynos_fb_rgb_mode_t { + MODE_RGB_P = 0, + MODE_BGR_P = 1, + MODE_RGB_S = 2, + MODE_BGR_S = 3, +}; + +typedef struct vidinfo { + u16 vl_col; /* Number of columns (i.e. 640) */ + u16 vl_row; /* Number of rows (i.e. 480) */ + u16 vl_width; /* Width of display area in millimeters */ + u16 vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u8 vl_freq; /* Frequency */ + u8 vl_clkp; /* Clock polarity */ + u8 vl_oep; /* Output Enable polarity */ + u8 vl_hsp; /* Horizontal Sync polarity */ + u8 vl_vsp; /* Vertical Sync polarity */ + u8 vl_dp; /* Data polarity */ + u8 vl_bpix; /* Bits per pixel */ + + /* Horizontal control register. Timing from data sheet */ + u8 vl_hspw; /* Horz sync pulse width */ + u8 vl_hfpd; /* Wait before of line */ + u8 vl_hbpd; /* Wait end of line */ + + /* Vertical control register. */ + u8 vl_vspw; /* Vertical sync pulse width */ + u8 vl_vfpd; /* Wait before of frame */ + u8 vl_vbpd; /* Wait end of frame */ + u8 vl_cmd_allow_len; /* Wait end of frame */ + + unsigned int win_id; + unsigned int init_delay; + unsigned int power_on_delay; + unsigned int reset_delay; + unsigned int interface_mode; + unsigned int mipi_enabled; + unsigned int dp_enabled; + unsigned int cs_setup; + unsigned int wr_setup; + unsigned int wr_act; + unsigned int wr_hold; + unsigned int rgb_mode; + unsigned int resolution; + + /* parent clock name(MPLL, EPLL or VPLL) */ + unsigned int pclk_name; + /* ratio value for source clock from parent clock. */ + unsigned int sclk_div; + + unsigned int dual_lcd_enabled; + void *screen_base; + void *cmap; /* Points at 8 to 16 bit conversion map. */ +} vidinfo_t; + +/* fimd.c */ +void exynos_set_trigger(void); +int exynos_is_i80_frame_done(void); +void exynos_fimd_lcd_off(void); +void exynos_fimd_window_off(unsigned int win_id); +unsigned long exynos_fimd_calc_fbsize(vidinfo_t *vid); +void exynos_fimd_lcd_disable(void); +void exynos_fimd_lcd_init(vidinfo_t *vid); + #endif diff --git a/src/cpu/samsung/exynos5420/power.c b/src/cpu/samsung/exynos5420/power.c index 18e0299eca..3215462e36 100644 --- a/src/cpu/samsung/exynos5420/power.c +++ b/src/cpu/samsung/exynos5420/power.c @@ -64,7 +64,7 @@ void power_enable_dp_phy(void) struct exynos5_power *power = samsung_get_base_power(); - setbits_le32(&power->dptx_phy_control, DPTX_PHY_ENABLE); + setbits_le32(&power->dptx_phy_control, EXYNOS_DP_PHY_ENABLE); } void power_enable_usb_phy(void) diff --git a/src/cpu/samsung/exynos5420/power.h b/src/cpu/samsung/exynos5420/power.h index 3c019d6dc5..665e94c197 100644 --- a/src/cpu/samsung/exynos5420/power.h +++ b/src/cpu/samsung/exynos5420/power.h @@ -32,7 +32,7 @@ void power_enable_hw_thermal_trip(void); #define POWER_PS_HOLD_CONTROL_DATA_HIGH (1 << 8) #define POWER_ENABLE_HW_TRIP (1UL << 31) -#define DPTX_PHY_ENABLE (1 << 0) +#define EXYNOS_DP_PHY_ENABLE (1 << 0) /* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */ #define PMU_DEBUG_XXTI 0x1000 diff --git a/src/lib/edid.c b/src/lib/edid.c index b2bd9b716a..4be0dc6652 100644 --- a/src/lib/edid.c +++ b/src/lib/edid.c @@ -1448,12 +1448,12 @@ void set_vbe_mode_info_valid(struct edid *edid, uintptr_t fb_addr) break; case 16: /* packed into 2-byte words */ - edid_fb.red_mask_pos = 12; - edid_fb.red_mask_size = 4; - edid_fb.green_mask_pos = 8; - edid_fb.green_mask_size = 4; + edid_fb.red_mask_pos = 11; + edid_fb.red_mask_size = 5; + edid_fb.green_mask_pos = 5; + edid_fb.green_mask_size = 6; edid_fb.blue_mask_pos = 0; - edid_fb.blue_mask_size = 4; + edid_fb.blue_mask_size = 5; break; default: printk(BIOS_SPEW, "%s: unsupported BPP %d\n", __func__, diff --git a/src/mainboard/google/pit/mainboard.c b/src/mainboard/google/pit/mainboard.c index 5c67df206d..f25c2a55b2 100644 --- a/src/mainboard/google/pit/mainboard.c +++ b/src/mainboard/google/pit/mainboard.c @@ -17,6 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include #include @@ -33,7 +34,8 @@ #include #include #include -#include +#include +#include #include #include #include @@ -52,6 +54,64 @@ static struct edid edid = { .bytes_per_line = 2 * 1366 }; +/* from the fdt */ +static struct vidinfo vidinfo = { + .vl_freq = 60, + .vl_col = 1366, + .vl_row = 768, + .vl_width = 1366, + .vl_height = 768, + .vl_clkp = 1, + .vl_dp = 1, + .vl_bpix = 4, + .vl_hspw = 32, + .vl_hbpd = 40, + .vl_hfpd = 40, + .vl_vspw = 6, + .vl_vbpd = 10, + .vl_vfpd = 12, + .vl_cmd_allow_len = 0xf, + .win_id = 3, + .dp_enabled = 1, + .dual_lcd_enabled = 0, + .interface_mode = FIMD_RGB_INTERFACE, +}; + +static unsigned char panel_edid[] = { + 0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00, + 0x06,0xaf,0x5c,0x31,0x00,0x00,0x00,0x00, + 0x00,0x16,0x01,0x03,0x80,0x1a,0x0e,0x78, + 0x0a,0x99,0x85,0x95,0x55,0x56,0x92,0x28, + 0x22,0x50,0x54,0x00,0x00,0x00,0x01,0x01, + 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, + 0x01,0x01,0x01,0x01,0x01,0x01,0xa3,0x1b, + 0x56,0x7e,0x50,0x00,0x16,0x30,0x30,0x20, + 0x36,0x00,0x00,0x90,0x10,0x00,0x00,0x18, + 0x6d,0x12,0x56,0x7e,0x50,0x00,0x16,0x30, + 0x30,0x20,0x36,0x00,0x00,0x90,0x10,0x00, + 0x00,0x18,0x00,0x00,0x00,0xfe,0x00,0x41, + 0x55,0x4f,0x0a,0x20,0x20,0x20,0x20,0x20, + 0x20,0x20,0x20,0x20,0x00,0x00,0x00,0xfe, + 0x00,0x42,0x31,0x31,0x36,0x58,0x57,0x30, + 0x33,0x20,0x56,0x31,0x20,0x0a,0x00,0x3d, + 0x00,0xc0,0x00,0x00,0x27,0xfd,0x00,0x20, + 0x02,0x59,0x07,0x00,0x64,0x3e,0x07,0x02, + 0x00,0x00,0xcd,0x12,0x59,0xff,0x10,0x03, + 0x00,0x00,0x00,0x00,0x64,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x05,0x00,0x00,0x00, + 0x9c,0x3f,0x07,0x02,0x31,0xf9,0x00,0x20, + 0x59,0xff,0x10,0x03,0x00,0x00,0x00,0x00, + 0xbc,0x3e,0x07,0x02,0xc0,0x9b,0x01,0x20, + 0x00,0x00,0x00,0x00,0xdb,0xf8,0x00,0x20, + 0x98,0x3e,0x07,0x02,0x8b,0xaf,0x00,0x20, + 0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0xe5,0xcd,0x16,0x00,0xe9,0xcd,0x16,0x00, + 0xe8,0x03,0x00,0x00,0x6c,0x55,0x01,0x20, + 0x2c,0x01,0x00,0x00,0x85,0xbb,0x00,0x20, + 0xe8,0x03,0x00,0x00,0xe9,0xcd,0x16,0x00, +}; + static const struct parade_write parade_writes[] = { { 0x02, 0xa1, 0x01 }, /* HPD low */ /* @@ -176,6 +236,8 @@ static enum exynos5_gpio_pin bl_en = GPIO_X22; /* active high */ static void parade_dp_bridge_setup(void) { + int i; + gpio_set_value(dp_pd_l, 1); gpio_cfg_pin(dp_pd_l, GPIO_OUTPUT); gpio_set_pull(dp_pd_l, GPIO_PULL_NONE); @@ -186,6 +248,8 @@ static void parade_dp_bridge_setup(void) udelay(10); gpio_set_value(dp_rst_l, 1); + + gpio_set_pull(dp_hpd, GPIO_PULL_NONE); gpio_cfg_pin(dp_hpd, GPIO_INPUT); /* De-assert PD (and possibly RST) to power up the bridge. */ @@ -199,9 +263,19 @@ static void parade_dp_bridge_setup(void) exynos_pinmux_i2c7(); i2c_init(7, 100000, 0x00); - parade_ps8625_bridge_setup(7, 0x48, - parade_writes, + parade_ps8625_bridge_setup(7, 0x48, parade_writes, ARRAY_SIZE(parade_writes)); + /* Spin until the display is ready. + * It's quite important to try really hard to get the display up, + * so be generous. It will typically be ready in only 5 ms. and + * we're out of here. + * If it's not ready after a second, then we're in big trouble. + */ + for(i = 0; i < 1000; i++){ + if (gpio_get_value(dp_hpd)) + break; + mdelay(1); + } } /* @@ -230,22 +304,17 @@ static void backlight_en(void) gpio_direction_output(bl_en, 1); } -//static struct video_info smdk5420_dp_config = { -static struct video_info dp_video_info = { - /* FIXME: fix video_info struct to use const for name */ - .name = (char *)"eDP-LVDS NXP PTN3460", + +static struct edp_video_info dp_video_info = { + .master_mode = 0, .h_sync_polarity = 0, .v_sync_polarity = 0, .interlaced = 0, - .color_space = COLOR_RGB, .dynamic_range = VESA, .ycbcr_coeff = COLOR_YCBCR601, .color_depth = COLOR_8, - - .link_rate = LINK_RATE_2_70GBPS, - .lane_count = LANE_COUNT2, }; /* FIXME: move some place more appropriate */ @@ -305,14 +374,13 @@ static void backlight_vdd(void) /* this happens after cpu_init where exynos resources are set */ static void mainboard_init(device_t dev) { - struct s5p_dp_device dp_device = { - .base = (struct exynos5_dp *)EXYNOS5420_DP1_BASE, - .video_info = &dp_video_info, - }; + /* we'll stick with the crummy u-boot struct for now.*/ + /* doing this as an auto since the struct has to be writeable */ + struct edp_device_info device_info; + void *fb_addr = (void *)(get_fb_base_kb() * KiB); gpio_init(); - tmu_init(&exynos5420_tmu_info); /* Clock Gating all the unused IP's to save power */ @@ -334,17 +402,30 @@ static void mainboard_init(device_t dev) lcd_vdd(); + /* Start the fimd running before you do the phy and lcd setup. + * why do fimd before training etc? + * because we need a data stream from + * the fimd or the clock recovery step fails. + */ + vidinfo.screen_base = fb_addr; + exynos_fimd_lcd_init(&vidinfo); + parade_dp_bridge_setup(); - dp_controller_init(&dp_device); + + /* this might get more dynamic in future ... */ + memset(&device_info, 0, sizeof(device_info)); + device_info.disp_info.name = (char *)"Pit display"; + device_info.disp_info.h_total = 1366; + device_info.disp_info.v_total = 768; + device_info.video_info = dp_video_info; + device_info.raw_edid = panel_edid; + exynos_init_dp(&device_info); udelay(LCD_T3_DELAY_MS * 1000); backlight_vdd(); backlight_pwm(); backlight_en(); - - // Uncomment to get excessive GPIO output: - // gpio_info(); } #if !CONFIG_DYNAMIC_CBMEM