From c112fe408dc6ba8db7d5ff2a45015cca3c66e5b6 Mon Sep 17 00:00:00 2001 From: Kevin Chiu Date: Mon, 30 Aug 2021 21:41:30 +0800 Subject: [PATCH] mb/google/guybrush/nipperkin: update nipperkin config copy config from guybrush reference board. remove wwan & speaker amp due to the different solution is used on nipperkin. BUG=b:194031783 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kevin Chiu Change-Id: I58a9b8393a965a9c793802d3e660829863b74375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57263 Tested-by: build bot (Jenkins) Reviewed-by: Karthik Ramasubramanian --- .../variants/nipperkin/overridetree.cb | 141 ++++++++++++++++++ 1 file changed, 141 insertions(+) diff --git a/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb b/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb index c182265075..b0ce404bf4 100644 --- a/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb +++ b/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb @@ -1,7 +1,148 @@ # SPDX-License-Identifier: GPL-2.0-or-later +fw_config + field USB_DB 0 1 + option USB_DB_A1_PS8811_C1_PS8818 0 + option USB_DB_A1_ANX7491_C1_ANX7451 1 + end + field FORM_FACTOR 2 + option FORM_FACTOR_CLAMSHELL 0 + option FORM_FACTOR_CONVERTIBLE 1 + end + field KB_BL 3 + option KB_BL_ABSENT 0 + option KB_BL_PRESENT 1 + end + field FP 4 + option FP_ABSENT 0 + option FP_PRESENT 1 + end + field WLAN 5 6 + option WLAN_WCN6856 0 + option WLAN_RTL8852 1 + end + field WWAN 7 8 + option WWAN_DIASABLED 0 + option WWAN_L850GL 1 + end + field BEEP_MODE 9 + option BEEP_MODE_AMP 0 + option BEEP_MODE_BIT_BANG 1 + end +end chip soc/amd/cezanne device domain 0 on end # domain + + register "slow_ppt_limit_mW" = "25000" + register "fast_ppt_limit_mW" = "30000" + register "slow_ppt_time_constant_s" = "5" + register "stapm_time_constant_s" = "275" + register "sustained_power_limit_mW" = "15000" + register "thermctl_limit_degreeC" = "100" + + register "telemetry_vddcrvddfull_scale_current_mA" = "92165" #mA + register "telemetry_vddcrvddoffset" = "412" + register "telemetry_vddcrsocfull_scale_current_mA" = "30233" #mA + register "telemetry_vddcrsocoffset" = "457" + + # I2C Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Trackpad | + #| I2C1 | Touchscreen | + #| I2C2 | Speaker, Codec, P-SAR | + #| I2C3 | H1 TPM | + #+-------------------+---------------------------+ + register "i2c[0]" = "{ + .speed = I2C_SPEED_FAST, + }" + + register "i2c[1]" = "{ + .speed = I2C_SPEED_FAST, + }" + + register "i2c[2]" = "{ + .speed = I2C_SPEED_FAST, + }" + + register "i2c[3]" = "{ + .speed = I2C_SPEED_FAST, + .early_init = true, + }" + + device ref i2c_0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)" + register "wake" = "GEVENT_22" + register "probed" = "1" + device i2c 15 on end + end + end # I2C0 + + device ref i2c_1 on + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_89)" + register "generic.probed" = "1" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_68)" + register "generic.enable_delay_ms" = "10" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_121)" + register "generic.reset_off_delay_ms" = "1" + register "generic.reset_delay_ms" = "10" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_120)" + register "generic.stop_delay_ms" = "170" + register "generic.stop_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 5d on end + end + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPIO_4)" + register "key.dev_name" = ""EJCT"" + register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + register "key.debounce_interval" = "100" + register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ" + device generic 0 on end + end + end # I2C1 + + device ref i2c_2 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)" + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end # I2C2 + + device ref uart_1 on + chip drivers/uart/acpi + register "name" = ""CRFP"" + register "desc" = ""Fingerprint Reader"" + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cros-ec-uart"" + register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_21)" + register "wake" = "GEVENT_5" + register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)" + device generic 0 on + probe FP FP_PRESENT + end + end + end + end # chip soc/amd/cezanne