rk3288: support edp HPD function

we use the delay 200ms to meet the edp power timing request before,
it waste time, so we use the HPD function to detect the edp panel now.
In previous version, the hardware may not support the edp HPD function,
so in the code it will spend 200ms to detect hpd single, if it don't get
the hpd single, it will contiue the edp initialization process, to compatible
all of the hardware version.

BUG=chrome-os-partner:35623
TEST=Boot from Mighty, and display normal
BRANCH=None

Change-Id: I82c6a80e37fa42eef3521e6ebbf190d7e80fcece
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7a5343eb9af12cae9a15284217762a91ae24bac6
Original-Change-Id: I21c0ef6ce4643e90a192d8b86659264895b5fda9
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242792
Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: http://review.coreboot.org/9659
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

src/mainboard/google/veyron_jerry/devicetree.cb

@@ -22,5 +22,4 @@ chip soc/rockchip/rk3288
 	device cpu_cluster 0 on end
 	register "vop_id" = "1"
 	register "framebuffer_bits_per_pixel" = "16"
-	register "lcd_power_on_udelay" = "200000"
 end

src/mainboard/google/veyron_jerry/mainboard.c

@@ -102,6 +102,10 @@ static void configure_vop(void)
 		rk808_configure_ldo(7, 2500);	/* VCC10_LCD_PWREN_H */
 		gpio_output(GPIO(7, B, 6), 1);	/* LCD_EN */
 		rk808_configure_switch(1, 1);	/* VCC33_LCD */
+
+		/* enable edp HPD */
+		gpio_input_pulldown(GPIO(7, B, 3));
+		writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug);
 		break;
 	}
 }

src/mainboard/google/veyron_mighty/devicetree.cb

@@ -22,5 +22,4 @@ chip soc/rockchip/rk3288
 	device cpu_cluster 0 on end
 	register "vop_id" = "1"
 	register "framebuffer_bits_per_pixel" = "16"
-	register "lcd_power_on_udelay" = "200000"
 end

src/mainboard/google/veyron_mighty/mainboard.c

@@ -102,6 +102,10 @@ static void configure_vop(void)
 		rk808_configure_ldo(7, 2500);	/* VCC10_LCD_PWREN_H */
 		gpio_output(GPIO(7, B, 6), 1);	/* LCD_EN */
 		rk808_configure_switch(1, 1);	/* VCC33_LCD */
+
+		/* enable edp HPD */
+		gpio_input_pulldown(GPIO(7, B, 3));
+		writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug);
 		break;
 	}
 }

src/mainboard/google/veyron_pinky/devicetree.cb

@@ -22,5 +22,4 @@ chip soc/rockchip/rk3288
 	device cpu_cluster 0 on end
 	register "vop_id" = "1"
 	register "framebuffer_bits_per_pixel" = "16"
-	register "lcd_power_on_udelay" = "200000"
 end

src/mainboard/google/veyron_pinky/mainboard.c

@@ -146,6 +146,10 @@ static void configure_vop(void)
 		rk808_configure_ldo(7, 2500);	/* VCC10_LCD_PWREN_H */
 		rk808_configure_switch(1, 1);	/* VCC33_LCD */
 		gpio_output(GPIO(7, B, 6), 1);	/* LCD_EN */
+
+		/* enable edp HPD */
+		gpio_input_pulldown(GPIO(7, B, 3));
+		writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug);
 		break;
 	}
 }

src/mainboard/google/veyron_speedy/devicetree.cb

@@ -22,5 +22,4 @@ chip soc/rockchip/rk3288
 	device cpu_cluster 0 on end
 	register "vop_id" = "1"
 	register "framebuffer_bits_per_pixel" = "16"
-	register "lcd_power_on_udelay" = "200000"
 end

src/mainboard/google/veyron_speedy/mainboard.c

@@ -102,6 +102,10 @@ static void configure_vop(void)
 		rk808_configure_ldo(7, 2500);	/* VCC10_LCD_PWREN_H */
 		gpio_output(GPIO(7, B, 6), 1);	/* LCD_EN */
 		rk808_configure_switch(1, 1);	/* VCC33_LCD */
+
+		/* enable edp HPD */
+		gpio_input_pulldown(GPIO(7, B, 3));
+		writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug);
 		break;
 	}
 }

src/soc/rockchip/rk3288/chip.h

@@ -26,7 +26,6 @@ struct soc_rockchip_rk3288_config {
 	u32 vop_id;
 	gpio_t lcd_bl_pwm_gpio;
 	gpio_t lcd_bl_en_gpio;
-	u32 lcd_power_on_udelay;
 	u32 bl_power_on_udelay;
 	u32 bl_pwm_to_enable_udelay;
 	u32 framebuffer_bits_per_pixel;

src/soc/rockchip/rk3288/display.c

@@ -56,7 +56,6 @@ void rk_display_init(device_t dev, u32 lcdbase,
 	rkclk_configure_vop_aclk(conf->vop_id, 192 * MHz);
 
 	rk_edp_init(conf->vop_id);
-	udelay(conf->lcd_power_on_udelay);
 
 	if (rk_edp_get_edid(&edid)) {
 		printk(BIOS_WARNING, "can not get edid\n");

src/soc/rockchip/rk3288/edp.c

@@ -938,6 +938,49 @@ static int rk_edp_config_video(struct rk_edp *edp)
 	return rk_edp_is_video_stream_on(edp);
 }
 
+static void rockchip_edp_force_hpd(struct rk_edp *edp)
+{
+	u32 val;
+
+	val = readl(&edp->regs->sys_ctl_3);
+	val |= (F_HPD | HPD_CTRL);
+	writel(val, &edp->regs->sys_ctl_3);
+}
+
+static int rockchip_edp_get_plug_in_status(struct rk_edp *edp)
+{
+	u32 val;
+
+	val = readl(&edp->regs->sys_ctl_3);
+	if (val & HPD_STATUS)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * support edp HPD function
+ * some hardware version do not support edp hdp,
+ * we use 200ms to try to get the hpd single now,
+ * if we can not get edp hpd single, it will delay 200ms,
+ * also meet the edp power timing request, to compatible
+ * all of the hardware version
+ */
+static void rockchip_edp_wait_hpd(struct rk_edp *edp)
+{
+	struct stopwatch hpd;
+
+	stopwatch_init_msecs_expire(&hpd, 200);
+	do {
+		if (rockchip_edp_get_plug_in_status(edp))
+			return;
+		udelay(100);
+	} while (!stopwatch_expired(&hpd));
+
+	printk(BIOS_DEBUG, "do not get hpd single, force hpd\n");
+	rockchip_edp_force_hpd(edp);
+}
+
 int rk_edp_get_edid(struct edid *edid)
 {
 	int i;
@@ -983,6 +1026,8 @@ void rk_edp_init(u32 vop_id)
 	val = (vop_id == 1) ? RK_SETBITS(1 << 5) : RK_CLRBITS(1 << 5);
 	writel(val, &rk3288_grf->soc_con6);
 
+	rockchip_edp_wait_hpd(&rk_edp);
+
 	rk_edp_init_refclk(&rk_edp);
 	rk_edp_init_interrupt(&rk_edp);
 	rk_edp_enable_sw_function(&rk_edp);

src/soc/rockchip/rk3288/include/soc/grf.h

@@ -89,7 +89,10 @@ struct rk3288_grf_regs {
 		u32 iomux_pwm0;
 		u32 iomux_pwm1;
 	};
+	union {
 		u32 gpio7b_iomux;
+		u32 iomux_edp_hotplug;
+	};
 	union {
 		u32 gpio7cl_iomux;
 		u32 iomux_i2c5sda;
@@ -217,4 +220,5 @@ static struct rk3288_sgrf_regs * const rk3288_sgrf = (void *)GRF_SECURE_BASE;
 #define IOMUX_EMMCPWREN  RK_CLRSETBITS(0x3 << 2, 0x2 << 2)
 #define IOMUX_EMMCCMD	 RK_CLRSETBITS(0x3f, 2 << 4 | 2 << 2 | 2 << 0)
 #define IOMUX_PWM1	RK_SETBITS(1 << 2)
+#define IOMUX_EDP_HOTPLUG	RK_CLRSETBITS(0x3 << 6, 0x2 << 6)
 #endif