mainboards/asrock/e350m1: Use driver for Nuvoton NCT5572D superio chip

On the ASRock E350M1 a Nuvoton NCT5572D is used as SuperIO-chip. The coreboot
port to this board however used the driver of the Winbond W83627HF SuperIO,
which is compatible enough to get most stuff working, but which clears bit 6 in
register 0x2B. This switches the function of pin 38 of the NCT5572D from
RSTOUT1# output to GP36. The PERST# pin of the ethernet chip and the
unpopulated miniPCIe slot are connected to this pin, so they didn't get reset
during a reboot.

Using the newly added driver for the Nuvoton NCT5572D fixes this problem.

There is also a trace from the pin 37 of the SuperIO, which can be configured
as RSTOUT2#, to pin 82 of the USB3-chip with unknown function.

As with the wrong driver, PS/2 keyboard and mouse do work in SeaBIOS and GRUB
but not in Linux.

Change-Id: I4bc78406afd3b0e10a1b04b561147e0ed94cc494
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/6266
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>

src/mainboard/asrock/e350m1/BiosCallOuts.c

@@ -24,11 +24,6 @@
 #include "SB800.h"
 #include <stdlib.h>
 
-/* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess?
- *
- * Board is known to have some issues with integrated NIC and
- * might need implementation to drive some GPIOs.
- */
 
 static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
 
@@ -100,6 +95,9 @@ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *Config
   TempData8 |= Data8;
   Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
 
+  /* this seems to be just copy-pasted from the AMD reference boards and needs
+   * some investigation
+   */
   switch(MemData->ParameterListPtr->DDR3Voltage){
     case VOLT1_35:
       Data8 =  Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);

src/mainboard/asrock/e350m1/Kconfig

@@ -24,7 +24,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
   select CPU_AMD_AGESA_FAMILY14
   select NORTHBRIDGE_AMD_AGESA_FAMILY14
   select SOUTHBRIDGE_AMD_CIMX_SB800
-	select SUPERIO_WINBOND_W83627HF
+	select SUPERIO_NUVOTON_NCT5572D
 	select SB_SUPERIO_HWM
         select HAVE_OPTION_TABLE
         select HAVE_PIRQ_TABLE

src/mainboard/asrock/e350m1/devicetree.cb

@@ -54,22 +54,15 @@ chip northbridge/amd/agesa/family14/root_complex
 					end # SM
 					device pci 14.1 on end # IDE	0x439c
 					device pci 14.2 on end # HDA	0x4383
-					device pci 14.3 on # LPC		0x439d
+					device pci 14.3 on # LPC
-						chip superio/winbond/w83627hf
+						chip superio/nuvoton/nct5572d
-							device pnp 2e.0 off #  Floppy
+							device pnp 2e.0 off end #  FDC; not externally available on the NCT5572D, but on the die
-								io 0x60 = 0x3f0
+							device pnp 2e.1 off end #  LPT1; same as FDC
-								irq 0x70 = 6
-								drq 0x74 = 2
-							end
-							device pnp 2e.1 off #  Parallel Port
-								io 0x60 = 0x378
-								irq 0x70 = 7
-							end
 							device pnp 2e.2 on #  Com1
 								io 0x60 = 0x3f8
 								irq 0x70 = 4
 							end
-							device pnp 2e.3 off #  Com2
+							device pnp 2e.3 off #  IR
 								io 0x60 = 0x2f8
 								irq 0x70 = 3
 							end
@@ -81,19 +74,24 @@ chip northbridge/amd/agesa/family14/root_complex
 							end
 							device pnp 2e.6 off #  CIR
 								io 0x60 = 0x100
+								irq 0x70 = 0
 							end
-							device pnp 2e.7 off #  GAME_MIDI_GIPO1
+							device pnp 2e.7 off end #  GIPO689
-								io 0x60 = 0x220
+							device pnp 2e.8 off end #  WDT
-								io 0x62 = 0x300
+							device pnp 2e.9 off end #  GPIO235
-								irq 0x70 = 9
-							end
-							device pnp 2e.8 off end #  GPIO2
-							device pnp 2e.9 off end #  GPIO3
 							device pnp 2e.a on end #  ACPI
 							device pnp 2e.b on #  HW Monitor
 								io 0x60 = 0x290
+								io 0x62 = 0x0000 #  SB-TSI currently not implemented
 								irq 0x70 = 5
 							end
+							device pnp 2e.c off end #  PECI
+							device pnp 2e.d off end #  SUSLED
+							device pnp 2e.e off #  CIRWKUP
+								io 0x60 = 0x0000
+								irq 0x70 = 0
+							end
+							device pnp 2e.f off end #  GPIO_PP_OD
 						end
 					end #LPC
 					device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}

src/mainboard/asrock/e350m1/romstage.c

@@ -33,14 +33,14 @@
 #include "agesawrapper.h"
 #include <northbridge/amd/agesa/agesawrapper_call.h>
 #include "cpu/x86/bist.h"
-#include <superio/winbond/common/winbond.h>
+#include <superio/nuvoton/common/nuvoton.h>
-#include <superio/winbond/w83627hf/w83627hf.h>
+#include <superio/nuvoton/nct5572d/nct5572d.h>
 #include "cpu/x86/lapic.h"
 #include <sb_cimx.h>
 #include "SBPLATFORM.h"
 
 
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+#define SERIAL_DEV PNP_DEV(0x2e, NCT5572D_SP1)
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
@@ -61,7 +61,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 		sb_Poweron_Init();
 
 		post_code(0x31);
-		winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+		nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 		console_init();
 	}