From c2f177737bb2ae1836b3badeb90daf6bdcc2134f Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Mon, 29 Apr 2013 23:05:44 +0200 Subject: [PATCH] Lenovo ThinkPad X60: Clean up `romstage.c` MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 1. Move comment for console init to correct place. 2. Start output with capital letter and add full stop at the end. 3. Add missing »)« at the end of description of GPIO 10. 4. Use tabulators instead of spaces. 5. Indent the code automatically using GNU indent [1] with the `-sc` switch adding stars in front of comment blocks as the good indent manual documents. $ indent -linux -sc src/mainboard/lenovo/x60/romstage.c Leave the numbers left aligned as it is more beneficial to be able to run indent without adapting the result afterward. [1] http://www.coreboot.org/Development_Guidelines#Coding_Style Change-Id: I2fa018ec28ff19d23d68754b565c13a7d7a57355 Signed-off-by: Paul Menzel Reviewed-on: http://review.coreboot.org/3185 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli Reviewed-by: Ronald G. Minnich --- src/mainboard/lenovo/x60/romstage.c | 68 +++++++++++++++-------------- 1 file changed, 36 insertions(+), 32 deletions(-) diff --git a/src/mainboard/lenovo/x60/romstage.c b/src/mainboard/lenovo/x60/romstage.c index 0acf3a2069..222b999334 100644 --- a/src/mainboard/lenovo/x60/romstage.c +++ b/src/mainboard/lenovo/x60/romstage.c @@ -43,28 +43,28 @@ void setup_ich7_gpios(void) printk(BIOS_DEBUG, " GPIOS..."); /* X60 GPIO: - 1: HDD_PRESENCE# - 6: Unknown (Pulled high by R215 to VCC3B) - 7: BDC_PRESENCE# - 8: H8_WAKE# - 9: RTC_BAT_IN# - 10: Unknown (Pulled high by R700 to VCC3M - 12: H8SCI# - 13: SLICE_ON_3M# - 14: Unknown (Pulled high by R321 to VCC3) - 15: Unknown (Pulled high by R258 to VCC3) - 19: Unknown (Pulled low by R594) - 21: Unknown (Pulled high by R145 to VCC3) - 22: FWH_WP# - 25: MDC_KILL# - 33: HDD_PRESENCE_2# - 35: CLKREQ_SATA# - 36: PLANARID0 - 37: PLANARID1 - 38: PLANARID2 - 39: PLANARID3 - 48: FWH_TBL# - */ + * 1: HDD_PRESENCE# + * 6: Unknown (Pulled high by R215 to VCC3B) + * 7: BDC_PRESENCE# + * 8: H8_WAKE# + * 9: RTC_BAT_IN# + * 10: Unknown (Pulled high by R700 to VCC3M) + * 12: H8SCI# + * 13: SLICE_ON_3M# + * 14: Unknown (Pulled high by R321 to VCC3) + * 15: Unknown (Pulled high by R258 to VCC3) + * 19: Unknown (Pulled low by R594) + * 21: Unknown (Pulled high by R145 to VCC3) + * 22: FWH_WP# + * 25: MDC_KILL# + * 33: HDD_PRESENCE_2# + * 35: CLKREQ_SATA# + * 36: PLANARID0 + * 37: PLANARID1 + * 38: PLANARID2 + * 39: PLANARID3 + * 48: FWH_TBL# + */ outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ outl(0xe0e8ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ @@ -107,7 +107,7 @@ static void early_superio_config(void) pnp_write_config(dev, 0x29, 0x06); - while(!(pnp_read_config(dev, 0x29) & 0x08) && timeout--) + while (!(pnp_read_config(dev, 0x29) & 0x08) && timeout--) udelay(1000); /* Enable COM1 */ @@ -146,7 +146,7 @@ static void rcba_config(void) /* Disable unused devices */ RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD; - RCBA32(0x3418) |= (1 << 0); // Required. + RCBA32(0x3418) |= (1 << 0); // Required. /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ RCBA32(0x1e84) = 0x00020001; @@ -236,18 +236,20 @@ void main(unsigned long bist) if (dock_present()) { dock_connect(); early_superio_config(); - /* Set up the console */ } + /* Set up the console */ console_init(); /* Halt if there was a built in self test failure */ report_bist_failure(bist); if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); + printk(BIOS_DEBUG, + "Soft reset detected, rebooting properly.\n"); outb(0x6, 0xcf9); - while (1) asm("hlt"); + while (1) + asm("hlt"); } /* Perform some early chipset initialization required @@ -302,7 +304,7 @@ void main(unsigned long bist) { /* This will not work if TSEG is in place! */ - u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c); + u32 tom = pci_read_config32(PCI_DEV(0, 2, 0), 0x5c); printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); ram_check(0x00000000, 0x000a0000); @@ -329,15 +331,17 @@ void main(unsigned long bist) * day. */ if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, + HIGH_MEMORY_SAVE); /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, + SKPAD_ACPI_S3_MAGIC); } #endif #if CONFIG_CONSOLE_CBMEM - /* Keep this the last thing this function does. */ - cbmemc_reinit(); + /* Keep this the last thing this function does. */ + cbmemc_reinit(); #endif }