GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

*** empty log message *** 

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1370 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Greg Watson 2004-02-08 20:17:01 +00:00
parent bd8e17a8f1
commit c34d5ca790
2 changed files with 45 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/northbridge/motorola/mpc107/meminfo.c
View File

@ -49,7 +49,7 @@ sdram_dimm_to_bank_info(const char *data, sdram_dimm_info *dimm, int verbose)
if (csum != data[63]) if (csum != data[63])
{ {
if (verbose) if (verbose)
printk_info("Broken checksum\n"); printk_info("Broken checksum 0x%x, should be 0x%x\n", data[63], csum);
return; return;
} }

66
src/northbridge/motorola/mpc107/mpc107.c
View File

@ -66,11 +66,19 @@ sizeram(void)
return &meminfo; return &meminfo;
} }
/*
* Configure the MPC107 with the most pessimistic settings. These
* are modified by reading the SPD EEPROM and adjusting accordingly.
* One thing to note. The SPD settings can be wrong, as
* was the case for my machine. I could only configure 32Mb out of
* 128Mb using these settings.
*/
void void
mpc107_init(void) mpc107_init(void)
{ {
uint16_t reg16; uint16_t reg16;
uint32_t reg32; uint32_t reg32;
uint32_t is32bits;
/* /*
* PCI Cmd * PCI Cmd
@ -93,6 +101,7 @@ mpc107_init(void)
* 0x00000800 enable MCP* assertion * 0x00000800 enable MCP* assertion
* 0x00000400 enable TEA* assertion * 0x00000400 enable TEA* assertion
* 0x00000200 enable data bus parking * 0x00000200 enable data bus parking
* 0x00000080 restrict flash write width
* 0x00000040 enable PCI store gathering * 0x00000040 enable PCI store gathering
* 0x00000010 enable loop-snoop * 0x00000010 enable loop-snoop
* 0x00000008 enable address bus parking * 0x00000008 enable address bus parking
@ -105,7 +114,7 @@ mpc107_init(void)
*/ */
reg32 &= 0x11; reg32 &= 0x11;
reg32 |= 0xff041a18; reg32 |= 0xff041a98;
pci_ppc_write_config32(0, 0, 0xa8, reg32); pci_ppc_write_config32(0, 0, 0xa8, reg32);
/* /*
@ -123,13 +132,14 @@ mpc107_init(void)
* 0x00000008 addr phase wt states = 2 * 0x00000008 addr phase wt states = 2
* 0x0000000c addr phase wt states = 3 * 0x0000000c addr phase wt states = 3
*/ */
reg32 = 0x04000000;
pci_ppc_write_config32(0, 0, 0xac, 0x04040004); pci_ppc_write_config32(0, 0, 0xac, reg32);
/* /*
* EUMBBAR * EUMBBAR
*/ */
pci_ppc_write_config32(0, 0, 0x78, 0xfc000000); reg32 = 0xfc000000;
pci_ppc_write_config32(0, 0, 0x78, reg32);
/* /*
* MCCR1 - Set MEMGO bit later! * MCCR1 - Set MEMGO bit later!
@ -140,10 +150,12 @@ mpc107_init(void)
* 0x00020000 EDO/FP enable (else SDRAM) * 0x00020000 EDO/FP enable (else SDRAM)
* 0x00010000 Parity check * 0x00010000 Parity check
* 0x0000FFFF 16Mbit/2 bank SDRAM * 0x0000FFFF 16Mbit/2 bank SDRAM
* 0x0000AAAA 256Mbit/4 bank SDRAM
* 0x00005555 64Mbit/2 bank SDRAM * 0x00005555 64Mbit/2 bank SDRAM
* 0x00000000 64Mbit/4 bank SDRAM * 0x00000000 64Mbit/4 bank SDRAM
*/ */
reg32 = pci_ppc_read_config32(0, 0, 0xf0); reg32 = pci_ppc_read_config32(0, 0, 0xf0);
is32bits = (reg32 & 0x00400000) == 0;
reg32 &= 0x00080000; /* Preserve MEMGO bit in case we're in RAM */ reg32 &= 0x00080000; /* Preserve MEMGO bit in case we're in RAM */
reg32 |= 0x75800000; reg32 |= 0x75800000;
pci_ppc_write_config32(0, 0, 0xf0, reg32); pci_ppc_write_config32(0, 0, 0xf0, reg32);
@ -158,14 +170,16 @@ mpc107_init(void)
* 0x00040000 SDRAM inline reads * 0x00040000 SDRAM inline reads
* 0x00020000 ECC enable * 0x00020000 ECC enable
* 0x00010000 EDO (else FP) * 0x00010000 EDO (else FP)
* 0x000006b8 Refresh 33MHz bus * 0x000004cc Refresh 33MHz bus (307 clocks)
* 0x0000035c Refresh 66MHz bus * 0x00000cc4 Refresh 66MHz bus (817 clocks)
* 0x0000023c Refresh 100MHz bus * 0x000010fc Refresh 83MHz bus (1087 clocks)
* 0x000001ac Refresh 133MHz bus * 0x0000150c Refresh 100MHz bus (1347 clocks)
* 0x00001d2c Refresh 133MHz bus (1867 clocks)
* 0x00000002 Reserve a page * 0x00000002 Reserve a page
* 0x00000001 RWM parity * 0x00000001 RWM parity
*/ */
pci_ppc_write_config32(0, 0, 0xf4, 0x0440023c); reg32 = 0x044004cc;
pci_ppc_write_config32(0, 0, 0xf4, reg32);
/* /*
* MCCR3 * MCCR3
@ -174,7 +188,8 @@ mpc107_init(void)
* 0x00400000 RDLAT = 4 clocks * 0x00400000 RDLAT = 4 clocks
* 0x00300000 RDLAT = 3 clocks * 0x00300000 RDLAT = 3 clocks
*/ */
pci_ppc_write_config32(0, 0, 0xf8, 0x78400000); reg32 = 0x78400000;
pci_ppc_write_config32(0, 0, 0xf8, reg32);
/* /*
* MCCR4 * MCCR4
@ -190,13 +205,20 @@ mpc107_init(void)
* 0x00003000 CAS Latencey (CL=3) * 0x00003000 CAS Latencey (CL=3)
* 0x00002000 CAS Latencey (CL=2) * 0x00002000 CAS Latencey (CL=2)
* 0x00000200 Sequential wrap/4-beat burst * 0x00000200 Sequential wrap/4-beat burst
* 0x00000300 Sequential wrap/8-beat burst
* 0x00000030 Reserve a page * 0x00000030 Reserve a page
* 0x00000009 RWM parity * 0x00000009 RWM parity
*/ */
pci_ppc_write_config32(0, 0, 0xfc, 0x35323239); reg32 = 0x35323239;
if (!is32bits)
reg32 |= 0x0300;
pci_ppc_write_config32(0, 0, 0xfc, reg32);
/* /*
* MSAR1/MSAR2/MESAR1/MESAR2 * MSAR1/MSAR2/MESAR1/MESAR2
*
* Assume each memory block is 32Mb. This is
* most likely NOT correct.
*/ */
pci_ppc_write_config32(0, 0, 0x80, 0x60402000); pci_ppc_write_config32(0, 0, 0x80, 0x60402000);
pci_ppc_write_config32(0, 0, 0x84, 0xe0c0a080); pci_ppc_write_config32(0, 0, 0x84, 0xe0c0a080);
@ -228,7 +250,7 @@ mpc107_init(void)
* 0x01 MemClk 20 ohms * 0x01 MemClk 20 ohms
* 0x00 MemClk 40 ohms * 0x00 MemClk 40 ohms
*/ */
pci_ppc_write_config8(0, 0, 0x73, 0xc0); pci_ppc_write_config8(0, 0, 0x73, 0xd1);
/* /*
* CDCR * CDCR
@ -244,15 +266,15 @@ mpc107_init(void)
* 0x0002 CPU_CLK1 disabled * 0x0002 CPU_CLK1 disabled
* 0x0001 CPU_CLK2 disabled * 0x0001 CPU_CLK2 disabled
*/ */
pci_ppc_write_config16(0, 0, 0x74, 0xfc01); pci_ppc_write_config16(0, 0, 0x74, 0xfd00);
/* /*
* MDCR * MICR
* 0x80 MCP 1=open-drain, 0=output * 0x80 MCP 1=open-drain, 0=output
* 0x40 SRESET 1=open-drain, 0=output * 0x40 SRESET 1=open-drain, 0=output
* 0x20 QACK 1=high-Z, 0=output * 0x20 QACK 1=high-Z, 0=output
*/ */
pci_ppc_write_config8(0, 0, 0x76, 0x60); pci_ppc_write_config8(0, 0, 0x76, 0x40);
/* /*
* MBEN * MBEN
@ -286,7 +308,7 @@ mpc107_init(void)
} }
/* /*
* Configure memory settings. * Configure real memory settings.
*/ */
unsigned long unsigned long
mpc107_config_memory(int no_banks, sdram_bank_info * bank, int for_real) mpc107_config_memory(int no_banks, sdram_bank_info * bank, int for_real)
@ -678,12 +700,12 @@ mpc107_probe_dimms(int no_dimms, sdram_dimm_info *dimms, sdram_bank_info * bank)
for(dimm = 0; dimm < no_dimms; dimm++) for(dimm = 0; dimm < no_dimms; dimm++)
{ {
dimms[dimm].number = dimm; dimms[dimm].number = dimm;
dimms[dimm].bank1 = bank + dimm*2; dimms[dimm].bank1 = bank + dimm*NUM_BANKS;
dimms[dimm].bank2 = bank + dimm*2 + 1; dimms[dimm].bank2 = bank + dimm*NUM_BANKS + 1;
bank[dimm*2].size = 0; bank[dimm*NUM_BANKS].size = 0;
bank[dimm*2+1].size = 0; bank[dimm*NUM_BANKS+1].size = 0;
bank[dimm*2].number = 0; bank[dimm*NUM_BANKS].number = 0;
bank[dimm*2+1].number = 1; bank[dimm*NUM_BANKS+1].number = 1;
} }