Add detection support for lots more Winbond Super I/Os (trivial).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2809 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann 2007-09-26 16:14:16 +00:00
parent e0ffaa164d
commit c3da36681d
2 changed files with 96 additions and 19 deletions

View File

@ -47,12 +47,12 @@ and print its vendor, name, ID, version, and config port.\n"
#define NANA -3 /* Not Available */
#define RSVD -4 /* Reserved */
#define MISC -5 /* Needs special comment in output */
#define MAXNAMELEN 20 /* Maximum Name Length */
#define MAXNAMELEN 30 /* Maximum Name Length */
#define MAXLDN 0xa /* Biggest LDN */
#define LDNSIZE (MAXLDN + 3) /* Biggest LDN + 0 + NOLDN + EOT */
#define MAXNUMIDX 70 /* Maximum number of indexes */
#define IDXSIZE (MAXNUMIDX + 1)
#define MAXNUMPORTS (4 + 1) /* Maximum number of Super I/O ports */
#define MAXNUMPORTS (5 + 1) /* Maximum number of Super I/O ports */
/* Command line parameters. */
extern int dump, dump_readable, verbose;
@ -96,7 +96,7 @@ void probe_idregs_smsc(uint16_t port);
/* winbond.c */
void probe_idregs_winbond(uint16_t port);
/** Table of which config ports to probe on each Super I/O. */
/** Table of which config ports to probe for each Super I/O family. */
const static struct {
void (*probe_idregs) (uint16_t port);
int ports[MAXNUMPORTS]; /* Signed, as we need EOT. */
@ -105,7 +105,7 @@ const static struct {
{probe_idregs_fintek, {0x2e, 0x4e, EOT}},
{probe_idregs_ite, {0x2e, 0x4e, EOT}},
{probe_idregs_smsc, {0x2e, 0x4e, 0x3f0, 0x370, EOT}},
{probe_idregs_winbond, {0x2e, 0x4e, EOT}},
{probe_idregs_winbond, {0x2e, 0x4e, 0x3f0, 0x370, 0x250, EOT}},
};
#endif

View File

@ -20,16 +20,29 @@
#include "superiotool.h"
#define DEVICE_ID_REG 0x20
#define DEVICE_REV_REG 0x21
#define DEVICE_ID_REG_OLD 0x09
#define DEVICE_ID_REG 0x20
#define DEVICE_REV_REG 0x21
/**
* The ID entries must be in 0xYYZ format, where YY is the device ID,
* and Z is bits 7..4 of the device revision register. We do not match
* bits 3..0 of the device revision here.
* bits 3..0 of the device revision here (at least for newer Super I/Os).
*
* But some of the older versions use both bytes (0x20 and 0x21), where
* register 0x21 holds the ID and the full 8 bits of 0x21 hold the revision.
*
* Some other Super I/Os only use bits 3..0 of 0x09 as ID.
*/
const static struct superio_registers reg_table[] = {
{0x601, "W83697HF/F", {
{0x527, "W83977CTF", {
{EOT}}},
{0x52f, "W83977EF/EG", {
{EOT}}},
{0x595, "W83627SF", {
{EOT}}},
{0x601, "W83697HF/F/HG", { /* No G version? */
{NOLDN, NULL,
{0x07,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,
0x2a,EOT},
@ -75,6 +88,14 @@ const static struct superio_registers reg_table[] = {
{0x30,0x60,0x61,0x70,EOT},
{0x00,0x00,0x00,0x00,EOT}},
{EOT}}},
{0x610, "W83L517D/D-F", {
{EOT}}},
{0x681, "W83697UF/UG", {
{EOT}}},
{0x708, "W83637HF", {
{EOT}}},
{0x828, "W83627THF/THG", { /* We assume rev is bits 3..0 of 0x21. */
{EOT}}},
{0x886, "W83627EHF/EF/EHG/EG", {
{NOLDN, NULL,
{0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
@ -123,26 +144,59 @@ const static struct superio_registers reg_table[] = {
{0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
{0x00,0x00,0x00,0x00,0xc1,0x00,EOT}},
{EOT}}},
{0x52, "W83627HF", {
{0xa23, "W83627UHG", {
{EOT}}},
{0x9771, "W83977F-A/G-A/AF-A/AG-A", {
{EOT}}},
{0x9773, "W83977TF", {
{EOT}}},
{0x9774, "W83977ATF", {
{EOT}}},
{0x52, "W83627HF/F/HG/G", {
{EOT}}},
{0xa, "W83877F", {
{EOT}}},
{0xc, "W83877TF", {
{EOT}}},
{0xd, "W83877ATF", {
{EOT}}},
{EOT}
};
void probe_idregs_winbond(uint16_t port)
static void enter_conf_mode_winbond_88(uint16_t port)
{
outb(0x88, port);
}
static void enter_conf_mode_winbond_89(uint16_t port)
{
outb(0x89, port);
}
static void enter_conf_mode_winbond_86(uint16_t port)
{
outb(0x86, port);
outb(0x86, port);
}
void probe_idregs_winbond_helper(uint16_t port)
{
uint16_t id;
uint8_t devid, rev;
enter_conf_mode_winbond_fintek_ite_8787(port);
uint8_t devid, rev, olddevid;
devid = regval(port, DEVICE_ID_REG);
rev = regval(port, DEVICE_REV_REG);
olddevid = regval(port, DEVICE_ID_REG_OLD);
if (devid != 0x52)
/* Bits 3..0 of 'rev' == IC version, we don't match that. */
id = (devid << 4) | ((rev & 0xf0) >> 4);
if (devid == 0x52)
id = devid; /* ID only */
else if ((devid == 0x97) && ((rev & 0xf0) == 7))
id = (devid << 8) | rev; /* ID and rev */
else
id = devid;
id = (devid << 4) | ((rev & 0xf0) >> 4); /* ID and rev[3..0] */
if (olddevid == 0x0a || olddevid == 0x0c || olddevid == 0x0d)
id = olddevid & 0x0f; /* ID[3..0] */
if (superio_unknown(reg_table, id)) {
no_superio_found(port);
@ -150,13 +204,36 @@ void probe_idregs_winbond(uint16_t port)
return;
}
printf("Found Winbond %s (id=0x%02x, rev=0x%02x) at 0x%x\n",
get_superio_name(reg_table, id), devid, rev, port);
if (olddevid == 0x0a || olddevid == 0x0c || olddevid == 0x0d)
printf("Found Winbond %s (id=0x%02x) at 0x%x\n",
get_superio_name(reg_table, id), olddevid, port);
else
printf("Found Winbond %s (id=0x%02x, rev=0x%02x) at 0x%x\n",
get_superio_name(reg_table, id), devid, rev, port);
/* TODO: Special notes in dump output for the MISC entries. */
dump_superio("Winbond", reg_table, port, id);
dump_superio_readable(port); /* TODO */
}
void probe_idregs_winbond(uint16_t port)
{
/* TODO: Not all init sequences are valid for all ports. */
enter_conf_mode_winbond_fintek_ite_8787(port);
probe_idregs_winbond_helper(port);
exit_conf_mode_winbond_fintek_ite_8787(port);
enter_conf_mode_winbond_88(port);
probe_idregs_winbond_helper(port);
exit_conf_mode_winbond_fintek_ite_8787(port);
enter_conf_mode_winbond_89(port);
probe_idregs_winbond_helper(port);
exit_conf_mode_winbond_fintek_ite_8787(port);
enter_conf_mode_winbond_86(port);
probe_idregs_winbond_helper(port);
exit_conf_mode_winbond_fintek_ite_8787(port);
}