soc/intel/broadwell: Use Lynx Point IOBP code

Change-Id: I89832dd6089e1961b4ffdb5661dc98b26a5cb0a2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52515
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/soc/intel/broadwell/include/soc/iobp.h

@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef _BROADWELL_IOBP_H_
-#define _BROADWELL_IOBP_H_
-
-u32 pch_iobp_read(u32 address);
-void pch_iobp_write(u32 address, u32 data);
-void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue);
-void pch_iobp_exec(u32 addr, u16 op_dcode, u8 route_id, u32 *data, u8 *resp);
-
-#endif

src/soc/intel/broadwell/pch/Makefile.inc

@@ -9,8 +9,8 @@ romstage-y += ../../../../southbridge/intel/lynxpoint/lp_gpio.c
 smm-y      += ../../../../southbridge/intel/lynxpoint/lp_gpio.c
 ramstage-y += hda.c
 ramstage-y += ../../../../southbridge/intel/lynxpoint/hda_verb.c
-ramstage-y += iobp.c
+ramstage-y += ../../../../southbridge/intel/lynxpoint/iobp.c
-romstage-y += iobp.c
+romstage-y += ../../../../southbridge/intel/lynxpoint/iobp.c
 ramstage-y += fadt.c
 ramstage-y += lpc.c
 ramstage-y += me.c

src/soc/intel/broadwell/pch/adsp.c

@@ -9,12 +9,12 @@
 #include <device/mmio.h>
 #include <soc/adsp.h>
 #include <soc/device_nvs.h>
-#include <soc/iobp.h>
 #include <soc/device_nvs.h>
 #include <soc/pch.h>
 #include <soc/ramstage.h>
 #include <soc/rcba.h>
 #include <soc/intel/broadwell/pch/chip.h>
+#include <southbridge/intel/lynxpoint/iobp.h>
 
 static void adsp_init(struct device *dev)
 {

src/soc/intel/broadwell/pch/iobp.c

@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <console/console.h>
-#include <delay.h>
-#include <soc/iobp.h>
-#include <soc/rcba.h>
-
-#define IOBP_RETRY 1000
-
-static inline int iobp_poll(void)
-{
-	unsigned int try;
-
-	for (try = IOBP_RETRY; try > 0; try--) {
-		u16 status = RCBA16(IOBPS);
-		if ((status & IOBPS_READY) == 0)
-			return 1;
-		udelay(10);
-	}
-
-	printk(BIOS_ERR, "IOBP: timeout waiting for transaction to complete\n");
-	return 0;
-}
-
-u32 pch_iobp_read(u32 address)
-{
-	u16 status;
-
-	if (!iobp_poll())
-		return 0;
-
-	/* Set the address */
-	RCBA32(IOBPIRI) = address;
-
-	/* READ OPCODE */
-	status = RCBA16(IOBPS);
-	status &= ~IOBPS_MASK;
-	status |= IOBPS_READ;
-	RCBA16(IOBPS) = status;
-
-	/* Undocumented magic */
-	RCBA16(IOBPU) = IOBPU_MAGIC;
-
-	/* Set ready bit */
-	status = RCBA16(IOBPS);
-	status |= IOBPS_READY;
-	RCBA16(IOBPS) = status;
-
-	if (!iobp_poll())
-		return 0;
-
-	/* Check for successful transaction */
-	status = RCBA16(IOBPS);
-	if (status & IOBPS_TX_MASK) {
-		printk(BIOS_ERR, "IOBP: read 0x%08x failed\n", address);
-		return 0;
-	}
-
-	/* Read IOBP data */
-	return RCBA32(IOBPD);
-}
-
-void pch_iobp_write(u32 address, u32 data)
-{
-	u16 status;
-
-	if (!iobp_poll())
-		return;
-
-	/* Set the address */
-	RCBA32(IOBPIRI) = address;
-
-	/* WRITE OPCODE */
-	status = RCBA16(IOBPS);
-	status &= ~IOBPS_MASK;
-	status |= IOBPS_WRITE;
-	RCBA16(IOBPS) = status;
-
-	RCBA32(IOBPD) = data;
-
-	/* Undocumented magic */
-	RCBA16(IOBPU) = IOBPU_MAGIC;
-
-	/* Set ready bit */
-	status = RCBA16(IOBPS);
-	status |= IOBPS_READY;
-	RCBA16(IOBPS) = status;
-
-	if (!iobp_poll())
-		return;
-
-	/* Check for successful transaction */
-	status = RCBA16(IOBPS);
-	if (status & IOBPS_TX_MASK) {
-		printk(BIOS_ERR, "IOBP: write 0x%08x failed\n", address);
-		return;
-	}
-
-	printk(BIOS_SPEW, "IOBP: set 0x%08x to 0x%08x\n", address, data);
-}
-
-void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue)
-{
-	u32 data = pch_iobp_read(address);
-
-	/* Update the data */
-	data &= andvalue;
-	data |= orvalue;
-
-	pch_iobp_write(address, data);
-}
-
-void pch_iobp_exec(u32 addr, u16 op_code, u8 route_id, u32 *data, u8 *resp)
-{
-	if (!data || !resp)
-		return;
-
-	*resp = -1;
-	if (!iobp_poll())
-		return;
-
-	/* RCBA2330[31:0] = Address */
-	RCBA32(IOBPIRI) = addr;
-	/* RCBA2338[15:8] = opcode */
-	RCBA16(IOBPS) = (RCBA16(IOBPS) & 0x00ff) | op_code;
-	/* RCBA233A[15:8] = 0xf0 RCBA233A[7:0] = Route ID */
-	RCBA16(IOBPU) = IOBPU_MAGIC | route_id;
-
-	if (op_code == IOBP_PCICFG_WRITE)
-		RCBA32(IOBPD) = *data;
-	/* Set RCBA2338[0] to trigger IOBP transaction*/
-	RCBA16(IOBPS) = RCBA16(IOBPS) | 0x1;
-
-	if (!iobp_poll())
-		return;
-
-	*resp = (RCBA16(IOBPS) & IOBPS_TX_MASK) >> 1;
-	*data = RCBA32(IOBPD);
-}

src/soc/intel/broadwell/pch/lpc.c

@@ -11,7 +11,6 @@
 #include <arch/ioapic.h>
 #include <acpi/acpi.h>
 #include <cpu/x86/smm.h>
-#include <soc/iobp.h>
 #include <soc/iomap.h>
 #include <soc/lpc.h>
 #include <soc/pch.h>
@@ -22,6 +21,7 @@
 #include <soc/intel/broadwell/pch/chip.h>
 #include <acpi/acpigen.h>
 #include <southbridge/intel/common/rtc.h>
+#include <southbridge/intel/lynxpoint/iobp.h>
 #include <southbridge/intel/lynxpoint/lp_gpio.h>
 
 static void pch_enable_ioapic(struct device *dev)

src/soc/intel/broadwell/pch/pch.c

@@ -5,13 +5,13 @@
 #include <device/device.h>
 #include <device/pci.h>
 #include <device/pci_def.h>
-#include <soc/iobp.h>
 #include <soc/pch.h>
 #include <soc/pci_devs.h>
 #include <soc/ramstage.h>
 #include <soc/rcba.h>
 #include <soc/serialio.h>
 #include <soc/spi.h>
+#include <southbridge/intel/lynxpoint/iobp.h>
 
 u8 pch_revision(void)
 {

src/soc/intel/broadwell/pch/pcie.c

@@ -9,11 +9,11 @@
 #include <device/pci_ids.h>
 #include <device/pci_ops.h>
 #include <soc/lpc.h>
-#include <soc/iobp.h>
 #include <soc/pch.h>
 #include <soc/pci_devs.h>
 #include <soc/rcba.h>
 #include <soc/intel/broadwell/pch/chip.h>
+#include <southbridge/intel/lynxpoint/iobp.h>
 #include <southbridge/intel/lynxpoint/lp_gpio.h>
 #include <delay.h>
 

src/soc/intel/broadwell/pch/sata.c

@@ -7,11 +7,11 @@
 #include <device/pci.h>
 #include <device/pci_ids.h>
 #include <delay.h>
-#include <soc/iobp.h>
 #include <soc/ramstage.h>
 #include <soc/rcba.h>
 #include <soc/sata.h>
 #include <soc/intel/broadwell/pch/chip.h>
+#include <southbridge/intel/lynxpoint/iobp.h>
 
 static inline u32 sir_read(struct device *dev, int idx)
 {

src/soc/intel/broadwell/pch/serialio.c

@@ -7,7 +7,6 @@
 #include <device/device.h>
 #include <device/pci.h>
 #include <device/pci_ids.h>
-#include <soc/iobp.h>
 #include <soc/device_nvs.h>
 #include <soc/pci_devs.h>
 #include <soc/pch.h>
@@ -15,6 +14,7 @@
 #include <soc/rcba.h>
 #include <soc/serialio.h>
 #include <soc/intel/broadwell/pch/chip.h>
+#include <southbridge/intel/lynxpoint/iobp.h>
 
 /* Set D3Hot Power State in ACPI mode */
 static void serialio_enable_d3hot(struct resource *res)