mb/google/dedede/var/storo: Add camera support
To support mipi camera. 1. enable DRIVERS_INTEL_MIPI_CAMERA/SOC_INTEL_COMMON_BLOCK_IPU 2. add IPU/VCM/NVM/CAM1 into devicetree To support usb camera. add camera support in devicetree and associated GPIO configuration. BUG=b:177393430, b:177388006 TEST=Build and boot to OS. Camera function is OK. Change-Id: I98d5708d1955406c2e46db972903057bb3d12dcc Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50995 Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
chenzanxi
Patrick Georgi
parent
e325a4d0dc
commit
c4691ab754
|
|
@ -99,6 +99,8 @@ config BOARD_GOOGLE_STORO
|
|||
bool "-> Storo"
|
||||
select BOARD_GOOGLE_BASEBOARD_DEDEDE
|
||||
select BASEBOARD_DEDEDE_LAPTOP
|
||||
select DRIVERS_INTEL_MIPI_CAMERA
|
||||
select SOC_INTEL_COMMON_BLOCK_IPU
|
||||
|
||||
config BOARD_GOOGLE_SASUKETTE
|
||||
bool "-> Sasukette"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,3 @@
|
|||
## SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
ramstage-y += gpio.c
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
|
||||
/* Pad configuration in ramstage*/
|
||||
static const struct pad_config gpio_table[] = {
|
||||
/* D15 : EN_PP3300_CAMERA */
|
||||
PAD_CFG_GPO(GPP_D15, 1, PLTRST),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_override_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(gpio_table);
|
||||
return gpio_table;
|
||||
}
|
||||
|
|
@ -1,5 +1,8 @@
|
|||
chip soc/intel/jasperlake
|
||||
|
||||
# USB Port Configuration
|
||||
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # User Facing Camera
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
|
|
@ -37,6 +40,34 @@ chip soc/intel/jasperlake
|
|||
}"
|
||||
|
||||
device domain 0 on
|
||||
device pci 05.0 on # IPU - MIPI Camera
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_uid" = "0x50000"
|
||||
register "acpi_name" = ""IPU0""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
|
||||
|
||||
register "cio2_num_ports" = "2"
|
||||
register "cio2_lanes_used" = "{1,4}"
|
||||
register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1""
|
||||
register "cio2_prt[0]" = "0"
|
||||
register "cio2_prt[1]" = "2"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device pci 14.0 on
|
||||
chip drivers/usb/acpi
|
||||
device usb 0.0 on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""User Facing Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
register "has_power_resource" = "1"
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D15)"
|
||||
register "enable_delay_ms" = "20"
|
||||
device usb 2.5 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end # USB xHCI
|
||||
device pci 15.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
|
|
@ -63,5 +94,75 @@ chip soc/intel/jasperlake
|
|||
device i2c 10 on end
|
||||
end
|
||||
end # I2C 2
|
||||
device pci 15.3 on
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_hid" = ""OVTI8856""
|
||||
register "acpi_uid" = "0"
|
||||
register "acpi_name" = ""CAM1""
|
||||
register "chip_name" = ""Ov 8856 Camera""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
|
||||
|
||||
register "ssdb.lanes_used" = "4"
|
||||
register "ssdb.link_used" = "1"
|
||||
register "ssdb.vcm_type" = "0x0C"
|
||||
register "vcm_name" = ""VCM0""
|
||||
register "num_freq_entries" = "2"
|
||||
register "link_freq[0]" = "360000000"
|
||||
register "link_freq[1]" = "180000000"
|
||||
register "remote_name" = ""IPU0""
|
||||
|
||||
register "has_power_resource" = "1"
|
||||
#Controls
|
||||
register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1
|
||||
register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
|
||||
|
||||
register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8
|
||||
register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2
|
||||
register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset
|
||||
|
||||
#_ON
|
||||
register "on_seq.ops_cnt" = "5"
|
||||
register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
|
||||
register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
|
||||
register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
|
||||
register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
|
||||
register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
|
||||
|
||||
#_OFF
|
||||
register "off_seq.ops_cnt" = "4"
|
||||
register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
|
||||
register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
|
||||
register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
|
||||
register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
|
||||
|
||||
device i2c 36 on end
|
||||
end
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
|
||||
register "acpi_uid" = "3"
|
||||
register "acpi_name" = ""VCM0""
|
||||
register "chip_name" = ""DW AF DAC""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_VCM"
|
||||
|
||||
register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC""
|
||||
register "vcm_compat" = ""dongwoon,dw9714""
|
||||
|
||||
device i2c 0c on end
|
||||
end
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_uid" = "1"
|
||||
register "acpi_name" = ""NVM0""
|
||||
register "chip_name" = ""GT24C08""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_NVM"
|
||||
|
||||
register "nvm_size" = "0x0400"
|
||||
register "nvm_pagesize" = "1"
|
||||
register "nvm_readonly" = "1"
|
||||
register "nvm_width" = "0x08"
|
||||
register "nvm_compat" = ""atmel,24c08""
|
||||
|
||||
device i2c 50 on end
|
||||
end
|
||||
end # I2C 3
|
||||
end
|
||||
end
|
||||
|
|
|
|||
Loading…
Reference in New Issue