From c4ce11b8bff7af7c387014094fbb2877725cfe53 Mon Sep 17 00:00:00 2001 From: Shelley Chen Date: Tue, 27 Nov 2018 17:19:53 -0800 Subject: [PATCH] mb/poppy/variant/nami: Move FPMCU_INT_L gpios to B group We discovered that the gpios previously used for FPMCU_INT_L were in two different groups with two different voltages (C group was at 3.3V and D group was at 1.8V). Moving both to B group which is at 3.3V. BUG=b:119447525 BRANCH=Nami TEST=unlock OS with fingerprint register fingerprint run powerd_dbus_suspend and see if it goes int s0ix Change-Id: I2332b0eb7a2f74e8178b95a23c8ac2091027a071 Signed-off-by: Shelley Chen Reviewed-on: https://review.coreboot.org/c/29872 Tested-by: build bot (Jenkins) Reviewed-by: Ren Kuo Reviewed-by: Furquan Shaikh --- src/mainboard/google/poppy/variants/nami/devicetree.cb | 4 ++-- src/mainboard/google/poppy/variants/nami/gpio.c | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb index edf7ed6212..d4e5d2f825 100644 --- a/src/mainboard/google/poppy/variants/nami/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb @@ -469,8 +469,8 @@ chip soc/intel/skylake register "hid" = "ACPI_DT_NAMESPACE_HID" register "uid" = "1" register "compat_string" = ""google,cros-ec-spi"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C8_IRQ)" - register "wake" = "GPE0_DW1_06" # GPP_D6 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B0_IRQ)" + register "wake" = "GPE0_DW0_01" # GPP_B1 device spi 0 on end end # FPMCU end # GSPI #1 diff --git a/src/mainboard/google/poppy/variants/nami/gpio.c b/src/mainboard/google/poppy/variants/nami/gpio.c index 2c9b9325d0..a1a0f92eec 100644 --- a/src/mainboard/google/poppy/variants/nami/gpio.c +++ b/src/mainboard/google/poppy/variants/nami/gpio.c @@ -409,6 +409,10 @@ static const struct pad_config pantheon_gpio_table[] = { }; static const struct pad_config fpmcu_gpio_table[] = { + /* B0 : CORE_VID0 ==> FPMCU_INT_L */ + PAD_CFG_GPI_APIC(GPP_B0, NONE, DEEP), + /* B1 : CORE_VID1 ==> FPMCU_INT_L */ + PAD_CFG_GPI_ACPI_SCI(GPP_B1, 20K_PU, DEEP, INVERT), /* B11 : EXT_PWR_GATE# ==> PCH_FP_PWR_EN */ PAD_CFG_GPO(GPP_B11, 1, DEEP), /* B19 : GSPI1_CS# ==> PCH_SPI_FP_CS# */ @@ -421,14 +425,10 @@ static const struct pad_config fpmcu_gpio_table[] = { PAD_CFG_NF(GPP_B22, NONE, DEEP, NF1), /* C3 : SML0CLK ==> TOUCHSCREEN_DIS# */ PAD_CFG_GPO(GPP_C3, 0, DEEP), - /* C8 : UART0_RXD ==> FPMCU_INT_L */ - PAD_CFG_GPI_APIC(GPP_C8, NONE, DEEP), /* C9 : UART0_TXD ==> FP_RST_ODL */ PAD_CFG_GPO(GPP_C9, 1, DEEP), /* D5 : ISH_I2C0_SDA ==> FPMCU_BOOT0 */ PAD_CFG_GPO(GPP_D5, 0, DEEP), - /* D6 : ISH_I2C0_SCL ==> FPMCU_INT_L */ - PAD_CFG_GPI_ACPI_SCI(GPP_D6, 20K_PU, DEEP, INVERT), /* D17 : DMIC_CLK1 ==> NC */ PAD_CFG_NC(GPP_D17), };