GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Various cosmetic and coding style fixes for ASUS A8V-E SE (trivial). 

No functional changes, only cosmetics. This is compile-tested.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3128 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann 2008-03-08 19:14:42 +00:00
parent 917158f803
commit c4f5365688
9 changed files with 511 additions and 784 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

376
src/mainboard/asus/a8v-e_se/Config.lb
View File

@ -2,8 +2,7 @@
## This file is part of the coreboot project. ## This file is part of the coreboot project.
## ##
## Copyright (C) 2007 AMD ## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD. ## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
##
## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> ## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
## ##
## This program is free software; you can redistribute it and/or modify ## This program is free software; you can redistribute it and/or modify
@ -21,260 +20,195 @@
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
## ##
## if USE_FALLBACK_IMAGE
## Compute the location and size of where this firmware image default ROM_SECTION_SIZE = FALLBACK_SIZE
## (coreboot plus bootloader) will live in the boot rom chip. default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
## else
if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
default ROM_SECTION_SIZE = FALLBACK_SIZE default ROM_SECTION_OFFSET = 0
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) end
else
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
default ROM_SECTION_OFFSET = 0
end
## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
## Compute the start location and size size of
## The coreboot bootloader.
##
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
default CONFIG_ROM_PAYLOAD = 1 default CONFIG_ROM_PAYLOAD = 1
default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
## default XIP_ROM_SIZE = 65536
## Compute where this copy of coreboot will start in the boot rom default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
##
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
##
## Compute a range of ROM that can cached to speed up coreboot,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
##
default XIP_ROM_SIZE=65536
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
arch i386 end arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o driver mainboard.o
if HAVE_ACPI_TABLES if HAVE_ACPI_TABLES
object acpi_tables.o object acpi_tables.o
object fadt.o object fadt.o
makerule dsdt.c makerule dsdt.c
depends "$(MAINBOARD)/dsdt.asl" depends "$(MAINBOARD)/dsdt.asl"
action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/dsdt.asl" action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/dsdt.asl"
action "mv dsdt.hex dsdt.c" action "mv dsdt.hex dsdt.c"
end end
object ./dsdt.o object ./dsdt.o
end end
if HAVE_MP_TABLE object mptable.o end if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o # object reset.o
if USE_DCACHE_RAM if USE_DCACHE_RAM
if CONFIG_USE_INIT
if CONFIG_USE_INIT makerule ./cache_as_ram_auto.o
makerule ./cache_as_ram_auto.o depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" end
end else
else makerule ./cache_as_ram_auto.inc
makerule ./cache_as_ram_auto.inc depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" action "perl -e 's/.rodata/.rom.data/g' -pi $@"
action "perl -e 's/.rodata/.rom.data/g' -pi $@" action "perl -e 's/.text/.section .rom.text/g' -pi $@"
action "perl -e 's/.text/.section .rom.text/g' -pi $@" end
end end
end
end end
##
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/16bit/entry16.lds
mainboardinit southbridge/via/k8t890/romstrap.inc mainboardinit southbridge/via/k8t890/romstrap.inc
ldscript /southbridge/via/k8t890/romstrap.lds ldscript /southbridge/via/k8t890/romstrap.lds
end end
mainboardinit cpu/x86/32bit/entry32.inc mainboardinit cpu/x86/32bit/entry32.inc
if USE_DCACHE_RAM if USE_DCACHE_RAM
if CONFIG_USE_INIT if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds ldscript /cpu/x86/32bit/entry32.lds
end end
if CONFIG_USE_INIT
if CONFIG_USE_INIT ldscript /cpu/amd/car/cache_as_ram.lds
ldscript /cpu/amd/car/cache_as_ram.lds end
end
end end
##
## Build our reset vector (This is where coreboot is entered)
##
if USE_FALLBACK_IMAGE if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds ldscript /cpu/x86/16bit/reset16.lds
else else
mainboardinit cpu/x86/32bit/reset32.inc mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds ldscript /cpu/x86/32bit/reset32.lds
end end
if USE_DCACHE_RAM if USE_DCACHE_RAM
## mainboardinit cpu/amd/car/cache_as_ram.inc
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
end end
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if USE_FALLBACK_IMAGE if USE_FALLBACK_IMAGE
if USE_DCACHE_RAM if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds ldscript /arch/i386/lib/failover.lds
end end
end end
##
## Setup RAM
##
if USE_DCACHE_RAM if USE_DCACHE_RAM
if CONFIG_USE_INIT
if CONFIG_USE_INIT initobject cache_as_ram_auto.o
initobject cache_as_ram_auto.o else
else mainboardinit ./cache_as_ram_auto.inc
mainboardinit ./cache_as_ram_auto.inc end
end
end end
##
## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME if CONFIG_CHIP_NAME
config chip.h config chip.h
end end
chip northbridge/amd/amdk8/root_complex chip northbridge/amd/amdk8/root_complex # Root complex
device apic_cluster 0 on device apic_cluster 0 on # APIC cluster
chip cpu/amd/socket_939 chip cpu/amd/socket_939 # CPU
device apic 0 on end device apic 0 on end # APIC
end end
end
device pci_domain 0 on # PCI domain
chip northbridge/amd/amdk8 # mc0
device pci 18.0 on # Northbridge
# Devices on link 0, link 0 == LDT 0
chip southbridge/via/vt8237r # Southbridge
register "ide0_enable" = "1" # Enable IDE channel 0
register "ide1_enable" = "1" # Enable IDE channel 1
register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0
register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1
register "fn_ctrl_lo" = "0" # Enable SB functions
register "fn_ctrl_hi" = "0xad" # Enable SB functions
device pci 0.0 on end # HT
device pci f.1 on end # IDE
device pci 11.0 on # LPC
chip drivers/generic/generic # DIMM 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic # DIMM 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic # DIMM 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic # DIMM 0-1-1
device i2c 53 on end
end
chip superio/winbond/w83627ehg # Super I/O
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 on # Parallel port
io 0x60 = 0x378
irq 0x70 = 7
drq 0x74 = 3
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off # Com2 (N/A on this board)
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 off # PS/2 keyboard (off)
end
device pnp 2e.106 off # Serial flash
io 0x60 = 0x100
end
device pnp 2e.007 off # GPIO 1
end
device pnp 2e.107 on # Game port
io 0x60 = 0x201
end
device pnp 2e.207 on # MIDI
io 0x62 = 0x330
irq 0x70 = 0xa
end
device pnp 2e.307 off # GPIO 6
end
device pnp 2e.8 off # WDTO_PLED
end
device pnp 2e.009 on # GPIO 2 on LDN 9 is in sio_setup
end
device pnp 2e.109 off # GPIO 3
end
device pnp 2e.209 off # GPIO 4
end
device pnp 2e.309 on # GPIO5
end
device pnp 2e.a off # ACPI
end
device pnp 2e.b on # Hardware monitor
io 0x60 = 0x290
irq 0x70 = 0
end
end
end
device pci 12.0 off end # VIA LAN (off, other chip used)
end end
chip southbridge/via/k8t890 # "Southbridge" K8T890
device pci_domain 0 on end
chip northbridge/amd/amdk8 #mc0 end
device pci 18.0 on # northbridge device pci 18.1 on end
# devices on link 0, link 0 == LDT 0 device pci 18.2 on end
chip southbridge/via/vt8237r device pci 18.3 on end
#both IDE channels end
register "ide0_enable" = "1" end
register "ide1_enable" = "1" end
#both cables are 80pin
register "ide0_80pin_cable" = "1"
register "ide1_80pin_cable" = "1"
#enables the functions of SB
register "fn_ctrl_lo" = "0"
register "fn_ctrl_hi" = "0xad"
device pci 0.0 on end # HT
device pci f.1 on end # IDE
device pci 11.0 on # LPC
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
chip superio/winbond/w83627ehg
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 on # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
drq 0x74 = 3
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 off #keyb OFF
end
device pnp 2e.106 off # SERIAL_FLASH
io 0x60 = 0x100
end
device pnp 2e.007 off #GPIO1 off
end
device pnp 2e.107 on #GAME on
io 0x60 = 0x201
end
device pnp 2e.207 on #MIDI on
io 0x62 = 0x330
irq 0x70 = 0xa
end
device pnp 2e.307 off #GPIO6 off
end
device pnp 2e.8 off end # WDTO_PLED
device pnp 2e.009 on #GPIO2 on Logical device 9 is in sio_setup
end
device pnp 2e.109 off #GPIO3 off
end
device pnp 2e.209 off #GPIO4 off
end
device pnp 2e.309 on #GPIO5 on
end
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
irq 0x70 = 0
end
end #end SIO
end #end 11
device pci 12.0 off end # VIA LAN is disabled, Asus used other chip
end
chip southbridge/via/k8t890
end
end # device pci 18.0
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end #mc0
end # pci_domain
end # root_complex

284
src/mainboard/asus/a8v-e_se/Options.lb
View File

@ -43,11 +43,9 @@ uses XIP_ROM_SIZE
uses XIP_ROM_BASE uses XIP_ROM_BASE
uses STACK_SIZE uses STACK_SIZE
uses HEAP_SIZE uses HEAP_SIZE
##uses USE_OPTION_TABLE # uses USE_OPTION_TABLE
##uses CONFIG_LB_MEM_TOPK # uses CONFIG_LB_MEM_TOPK
uses HAVE_ACPI_TABLES uses HAVE_ACPI_TABLES
uses LB_CKS_RANGE_START uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END uses LB_CKS_RANGE_END
uses LB_CKS_LOC uses LB_CKS_LOC
@ -75,242 +73,96 @@ uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
#bx_b001- uses K8_HW_MEM_HOLE_SIZEK # bx_b001- uses K8_HW_MEM_HOLE_SIZEK
uses K8_HT_FREQ_1G_SUPPORT uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE uses DCACHE_RAM_SIZE
uses DCACHE_RAM_GLOBAL_VAR_SIZE uses DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT uses CONFIG_USE_INIT
uses ENABLE_APIC_EXT_ID uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET uses APIC_ID_OFFSET
uses LIFT_BSP_APIC_ID uses LIFT_BSP_APIC_ID
uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_UNITID_BASE
uses HT_CHAIN_END_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE
#bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0 # bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
#bx_b005+ # bx_b005+
uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_ON_BUS0
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_COMPRESSED_PAYLOAD_LZMA
## ROM_SIZE is the size of boot ROM that this board will use. default ROM_SIZE = 512 * 1024
#512K bytes default FALLBACK_SIZE = 256 * 1024
default ROM_SIZE=512 * 1024 default HAVE_FALLBACK_BOOT = 1
default HAVE_HARD_RESET = 0
default HAVE_PIRQ_TABLE = 0
default IRQ_SLOT_COUNT = 11 # FIXME?
default HAVE_MP_TABLE = 1
default HAVE_OPTION_TABLE = 0 # FIXME
# Move the default coreboot CMOS range off of AMD RTC registers.
default LB_CKS_RANGE_START = 49
default LB_CKS_RANGE_END = 122
default LB_CKS_LOC = 123
default CONFIG_SMP = 1
default CONFIG_MAX_CPUS = 2
default CONFIG_MAX_PHYSICAL_CPUS = 1
default CONFIG_LOGICAL_CPUS = 1
default HAVE_ACPI_TABLES = 1
# default CONFIG_CHIP_NAME = 1
#1M bytes # 1G memory hole
#bx- default ROM_SIZE=1024 * 1024 # bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000
## # Opteron K8 1G HT support
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use default K8_HT_FREQ_1G_SUPPORT = 1
##
#256K
default FALLBACK_SIZE=256 * 1024
### # HT Unit ID offset, default is 1, the typical one.
### Build options default HT_CHAIN_UNITID_BASE = 0x0
###
## # Real SB Unit ID, default is 0x20, mean don't touch it at last.
## Build code for the fallback boot # default HT_CHAIN_END_UNITID_BASE = 0x0
##
default HAVE_FALLBACK_BOOT=1
## # Make the SB HT chain on bus 0, default is not (0).
## Build code to reset the motherboard from coreboot # bx_b001- default K8_SB_HT_CHAIN_ON_BUS0 = 2
##
default HAVE_HARD_RESET=0
## # bx_b005+ make the SB HT chain on bus 0.
## Build code to export a programmable irq routing table default SB_HT_CHAIN_ON_BUS0 = 1
##
default HAVE_PIRQ_TABLE=0
default IRQ_SLOT_COUNT=11
## # Only offset for SB chain?, default is yes(1).
## Build code to export an x86 MP table default SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
## Useful for specifying IRQ routing values
##
default HAVE_MP_TABLE=1
## default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
## Build code to export a CMOS option table default CONFIG_PCI_ROM_RUN = 1 # Needed for VGA.
## default USE_DCACHE_RAM = 1
default HAVE_OPTION_TABLE=0 default DCACHE_RAM_BASE = 0xcc000
default DCACHE_RAM_SIZE = 0x4000
## default DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
## Move the default coreboot cmos range off of AMD RTC registers default CONFIG_USE_INIT = 0
## default ENABLE_APIC_EXT_ID = 0
default LB_CKS_RANGE_START=49 default APIC_ID_OFFSET = 0x10
default LB_CKS_RANGE_END=122 default LIFT_BSP_APIC_ID = 0
default LB_CKS_LOC=123 default CONFIG_IOAPIC = 1
default MAINBOARD_VENDOR = "ASUS"
## default MAINBOARD_PART_NUMBER = "A8V-E SE"
## Build code for SMP support default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
## Only worry about 2 micro processors # default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x1234 # FIXME
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
default CONFIG_MAX_PHYSICAL_CPUS=1
default CONFIG_LOGICAL_CPUS=1
#acpi
default HAVE_ACPI_TABLES=1
#CHIP_NAME ?
#default CONFIG_CHIP_NAME=1
#1G memory hole
#bx_b001- default K8_HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support
default K8_HT_FREQ_1G_SUPPORT=1
##HT Unit ID offset, default is 1, the typical one
default HT_CHAIN_UNITID_BASE=0x0
##real SB Unit ID, default is 0x20, mean dont touch it at last
#default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0)
#bx_b001- default K8_SB_HT_CHAIN_ON_BUS0=2
##bx_b005+ make the SB HT chain on bus 0
default SB_HT_CHAIN_ON_BUS0=1
##only offset for SB chain?, default is yes(1)
default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
#VGA
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
##
## enable CACHE_AS_RAM specifics
##
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcc000
default DCACHE_RAM_SIZE=0x4000
default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
default ENABLE_APIC_EXT_ID=0
default APIC_ID_OFFSET=0x10
default LIFT_BSP_APIC_ID=0
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
default MAINBOARD_PART_NUMBER="A8V-E SE"
default MAINBOARD_VENDOR="ASUS"
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1043
#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1234
###
### coreboot layout values
###
## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default ROM_IMAGE_SIZE = 64 * 1024 default ROM_IMAGE_SIZE = 64 * 1024
default STACK_SIZE = 8 * 1024
## default HEAP_SIZE = 256 * 1024
## Use a small 8K stack # More 1M for pgtbl.
## # default CONFIG_LB_MEM_TOPK = 2048
default STACK_SIZE= 8 * 1024 default _RAMBASE = 0x00004000
# default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
##
## Use a small 256K heap
##
default HEAP_SIZE=256 * 1024
#more 1M for pgtbl
##default CONFIG_LB_MEM_TOPK=2048
##
## Only use the option table in a normal image
##
##default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
##
## Coreboot C code runs at this location in RAM
##
default _RAMBASE=0x00004000
##
## Load the payload from the ROM
##
default CONFIG_ROM_PAYLOAD = 1 default CONFIG_ROM_PAYLOAD = 1
default CC = "$(CROSS_COMPILE)gcc -m32"
### default HOSTCC = "gcc"
### Defaults of options that you may want to override in the target config file default CONFIG_GDB_STUB = 0
### default CONFIG_CONSOLE_SERIAL8250 = 1
default TTYS0_BAUD = 115200
## default TTYS0_BASE = 0x3f8
## The default compiler default TTYS0_LCS = 0x3 # 8n1
## default DEFAULT_CONSOLE_LOGLEVEL = 8
default CC="$(CROSS_COMPILE)gcc -m32" default MAXIMUM_CONSOLE_LOGLEVEL = 8
default HOSTCC="gcc" default MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default TTYS0_BAUD=115200
#default TTYS0_BAUD=57600
#default TTYS0_BAUD=38400
#default TTYS0_BAUD=19200
#default TTYS0_BAUD=9600
#default TTYS0_BAUD=4800
#default TTYS0_BAUD=2400
#default TTYS0_BAUD=1200
# Select the serial console base port
default TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
### End Options.lb
end end

52
src/mainboard/asus/a8v-e_se/acpi_tables.c
View File

@ -1,6 +1,7 @@
/* /*
* This file is part of the coreboot project. * This file is part of the coreboot project.
* written by Stefan Reinauer <stepan@openbios.org> *
* Written by Stefan Reinauer <stepan@openbios.org>.
* ACPI FADT, FACS, and DSDT table support added by * ACPI FADT, FACS, and DSDT table support added by
* *
* Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org>
@ -27,7 +28,6 @@
#include <arch/smp/mpspec.h> #include <arch/smp/mpspec.h>
#include <device/device.h> #include <device/device.h>
#include <device/pci_ids.h> #include <device/pci_ids.h>
#include <../../../southbridge/via/vt8237r/vt8237r.h> #include <../../../southbridge/via/vt8237r/vt8237r.h>
#include <../../../southbridge/via/k8t890/k8t890.h> #include <../../../southbridge/via/k8t890/k8t890.h>
@ -37,6 +37,7 @@ unsigned long acpi_fill_mcfg(unsigned long current)
{ {
device_t dev; device_t dev;
struct resource *res; struct resource *res;
dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CE_5, 0); dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CE_5, 0);
if (!dev) if (!dev)
return current; return current;
@ -53,36 +54,32 @@ unsigned long acpi_fill_madt(unsigned long current)
{ {
unsigned int gsi_base = 0x18; unsigned int gsi_base = 0x18;
/* create all subtables for processors */ /* Create all subtables for processors. */
current = acpi_create_madt_lapics(current); current = acpi_create_madt_lapics(current);
/* Write SB IOAPIC */ /* Write SB IOAPIC. */
current += current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, VT8237R_APIC_ID, VT8237R_APIC_ID, VT8237R_APIC_BASE, 0);
VT8237R_APIC_BASE, 0);
/* Write NB IOAPIC */ /* Write NB IOAPIC. */
current += current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, K8T890_APIC_ID, K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base);
K8T890_APIC_BASE, gsi_base);
/* IRQ9 ACPI active low */ /* IRQ9 ACPI active low. */
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
/* IRQ0 -> APIC IRQ2 */ /* IRQ0 -> APIC IRQ2. */
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
current, 0, 0, 2, 0x0); current, 0, 0, 2, 0x0);
/* create all subtables for processors */ /* Create all subtables for processors. */
current = current = acpi_create_madt_lapic_nmis(current,
acpi_create_madt_lapic_nmis(current, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1);
MP_IRQ_TRIGGER_EDGE |
MP_IRQ_POLARITY_HIGH, 1);
return current; return current;
} }
unsigned long write_acpi_tables(unsigned long start) unsigned long write_acpi_tables(unsigned long start)
{ {
unsigned long current; unsigned long current;
@ -96,27 +93,25 @@ unsigned long write_acpi_tables(unsigned long start)
acpi_facs_t *facs; acpi_facs_t *facs;
acpi_header_t *dsdt; acpi_header_t *dsdt;
/* Align ACPI tables to 16byte */ /* Align ACPI tables to 16 byte. */
start = (start + 0x0f) & -0x10; start = (start + 0x0f) & -0x10;
current = start; current = start;
printk_info("ACPI: Writing ACPI tables at %lx...\n", start); printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
/* We need at least an RSDP and an RSDT Table */ /* We need at least an RSDP and an RSDT table. */
rsdp = (acpi_rsdp_t *) current; rsdp = (acpi_rsdp_t *) current;
current += sizeof(acpi_rsdp_t); current += sizeof(acpi_rsdp_t);
rsdt = (acpi_rsdt_t *) current; rsdt = (acpi_rsdt_t *) current;
current += sizeof(acpi_rsdt_t); current += sizeof(acpi_rsdt_t);
/* clear all table memory */ /* Clear all table memory. */
memset((void *) start, 0, current - start); memset((void *) start, 0, current - start);
acpi_write_rsdp(rsdp, rsdt); acpi_write_rsdp(rsdp, rsdt);
acpi_write_rsdt(rsdt); acpi_write_rsdt(rsdt);
/* /* We explicitly add these tables later on: */
* We explicitly add these tables later on:
*/
printk_debug("ACPI: * FACS\n"); printk_debug("ACPI: * FACS\n");
facs = (acpi_facs_t *) current; facs = (acpi_facs_t *) current;
current += sizeof(acpi_facs_t); current += sizeof(acpi_facs_t);
@ -126,7 +121,7 @@ unsigned long write_acpi_tables(unsigned long start)
current += ((acpi_header_t *) AmlCode)->length; current += ((acpi_header_t *) AmlCode)->length;
memcpy((void *) dsdt, (void *) AmlCode, memcpy((void *) dsdt, (void *) AmlCode,
((acpi_header_t *) AmlCode)->length); ((acpi_header_t *) AmlCode)->length);
dsdt->checksum = 0; // don't trust intel iasl compiler to get this right dsdt->checksum = 0; /* Don't trust iasl to get this right. */
dsdt->checksum = acpi_checksum(dsdt, dsdt->length); dsdt->checksum = acpi_checksum(dsdt, dsdt->length);
printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt,
dsdt->length); dsdt->length);
@ -144,7 +139,7 @@ unsigned long write_acpi_tables(unsigned long start)
acpi_create_hpet(hpet); acpi_create_hpet(hpet);
acpi_add_table(rsdt, hpet); acpi_add_table(rsdt, hpet);
/* If we want to use HPET Timers Linux wants an MADT */ /* If we want to use HPET timers Linux wants an MADT. */
printk_debug("ACPI: * MADT\n"); printk_debug("ACPI: * MADT\n");
madt = (acpi_madt_t *) current; madt = (acpi_madt_t *) current;
acpi_create_madt(madt); acpi_create_madt(madt);
@ -157,7 +152,6 @@ unsigned long write_acpi_tables(unsigned long start)
current += mcfg->header.length; current += mcfg->header.length;
acpi_add_table(rsdt, mcfg); acpi_add_table(rsdt, mcfg);
/* SRAT */
printk_debug("ACPI: * SRAT\n"); printk_debug("ACPI: * SRAT\n");
srat = (acpi_srat_t *) current; srat = (acpi_srat_t *) current;
acpi_create_srat(srat); acpi_create_srat(srat);

141
src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c
View File

@ -2,10 +2,9 @@
* This file is part of the coreboot project. * This file is part of the coreboot project.
* *
* Copyright (C) 2006 AMD * Copyright (C) 2006 AMD
* Written by Yinghai Lu <yinghailu@amd.com> for AMD. * (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
* Copyright (C) 2006 MSI * Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI)
*
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@ -32,15 +31,16 @@
unsigned int get_sbdn(unsigned bus); unsigned int get_sbdn(unsigned bus);
//used by raminit /* Used by raminit. */
#define QRANK_DIMM_SUPPORT 1 #define QRANK_DIMM_SUPPORT 1
//used by init_cpus and fidvid /* Used by init_cpus and fidvid */
#define K8_SET_FIDVID 1 #define K8_SET_FIDVID 1
//if we want to wait for core1 done before DQS training, set it to 0
/* If we want to wait for core1 done before DQS training, set it to 0. */
#define K8_SET_FIDVID_CORE0_ONLY 1 #define K8_SET_FIDVID_CORE0_ONLY 1
//#define DEBUG_SMBUS 1 /* #define DEBUG_SMBUS 1 */
#include <stdint.h> #include <stdint.h>
#include <device/pci_def.h> #include <device/pci_def.h>
@ -50,31 +50,23 @@ unsigned int get_sbdn(unsigned bus);
#include <cpu/x86/lapic.h> #include <cpu/x86/lapic.h>
#include "option_table.h" #include "option_table.h"
#include "pc80/mc146818rtc_early.c" #include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c" #include "pc80/serial.c"
#include "arch/i386/lib/console.c" #include "arch/i386/lib/console.c"
#include <cpu/amd/model_fxx_rev.h> #include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/raminit.h" #include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c" #include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c" #include "lib/delay.c"
#if CONFIG_USE_INIT == 0 #if CONFIG_USE_INIT == 0
#include "lib/memcpy.c" #include "lib/memcpy.c"
#endif #endif
#include "cpu/x86/lapic/boot_cpu.c" #include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/debug.c"
#include "northbridge/amd/amdk8/early_ht.c" #include "northbridge/amd/amdk8/early_ht.c"
#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c" #include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
#include "southbridge/via/vt8237r/vt8237r_early_smbus.c" #include "southbridge/via/vt8237r/vt8237r_early_smbus.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h" #include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/setup_resource_map.c" #include "northbridge/amd/amdk8/setup_resource_map.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) #define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
@ -90,7 +82,6 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{ {
} }
static inline int spd_read_byte(unsigned device, unsigned address) static inline int spd_read_byte(unsigned device, unsigned address)
{ {
return smbus_read_byte(device, address); return smbus_read_byte(device, address);
@ -103,34 +94,27 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c" #include "northbridge/amd/amdk8/incoherent_ht.c"
#include "sdram/generic_sdram.c" #include "sdram/generic_sdram.c"
#include "cpu/amd/dualcore/dualcore.c" #include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/via/k8t890/k8t890_early_car.c" #include "southbridge/via/k8t890/k8t890_early_car.c"
#include "cpu/amd/car/copy_and_run.c" #include "cpu/amd/car/copy_and_run.c"
#include "cpu/amd/car/post_cache_as_ram.c" #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c" #include "cpu/amd/model_fxx/init_cpus.c"
#include "cpu/amd/model_fxx/fidvid.c" #include "cpu/amd/model_fxx/fidvid.c"
#include "northbridge/amd/amdk8/resourcemap.c" #include "northbridge/amd/amdk8/resourcemap.c"
void activate_spd_rom(const struct mem_controller *ctrl) void activate_spd_rom(const struct mem_controller *ctrl)
{ {
} }
void hard_reset(void) void hard_reset(void)
{ {
print_info("NO HARD RESET FIX ME!\n"); print_info("NO HARD RESET. FIX ME!\n");
} }
void soft_reset(void) void soft_reset(void)
{ {
uint8_t tmp; uint8_t tmp;
set_bios_reset(); set_bios_reset();
print_debug("soft reset \r\n"); print_debug("soft reset \r\n");
@ -154,26 +138,29 @@ unsigned int get_sbdn(unsigned bus)
return (dev >> 15) & 0x1f; return (dev >> 15) & 0x1f;
} }
void sio_init(void)
void sio_init(void) { {
u8 reg; u8 reg;
pnp_enter_ext_func_mode(SERIAL_DEV); pnp_enter_ext_func_mode(SERIAL_DEV);
/* We have 24MHz input. */
reg = pnp_read_config(SERIAL_DEV, 0x24); reg = pnp_read_config(SERIAL_DEV, 0x24);
pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); /* we have 24MHz input */ pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40));
/* We have GPIO for KB/MS pin. */
reg = pnp_read_config(SERIAL_DEV, 0x2A); reg = pnp_read_config(SERIAL_DEV, 0x2a);
pnp_write_config(SERIAL_DEV, 0x2A, (reg | 1)); /* we have GPIO for KB/MS PIN */ pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1));
/* We have all RESTOUT and even some reserved bits, too. */
reg = pnp_read_config(SERIAL_DEV, 0x2C); reg = pnp_read_config(SERIAL_DEV, 0x2c);
pnp_write_config(SERIAL_DEV, 0x2C, (reg | 0xf0)); /* we have all RESTOUT and even some reserved bits too */ pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0));
pnp_exit_ext_func_mode(SERIAL_DEV); pnp_exit_ext_func_mode(SERIAL_DEV);
pnp_enter_ext_func_mode(ACPI_DEV); pnp_enter_ext_func_mode(ACPI_DEV);
pnp_set_logical_device(ACPI_DEV); pnp_set_logical_device(ACPI_DEV);
/*
* Set the delay rising time from PWROK_LP to PWROK_ST to
* 300 - 600ms, and 0 to vice versa.
*/
reg = pnp_read_config(ACPI_DEV, 0xe6); reg = pnp_read_config(ACPI_DEV, 0xe6);
/* Set the delay rising time from PWROK_LP to PWROK_ST to 300 - 600ms, and 0 to vice versa */
pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0));
/* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */
reg = pnp_read_config(ACPI_DEV, 0xe4); reg = pnp_read_config(ACPI_DEV, 0xe4);
@ -182,15 +169,14 @@ void sio_init(void) {
pnp_enter_ext_func_mode(GPIO_DEV); pnp_enter_ext_func_mode(GPIO_DEV);
pnp_set_logical_device(GPIO_DEV); pnp_set_logical_device(GPIO_DEV);
/* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */
/* set memory voltage to 2.75V, vcore offset + 100mV, 1.5V Chipset voltage */ pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */
pnp_write_config(GPIO_DEV, 0x30, 0x9); /* Enable GPIO 2 & GPIO 5 */ pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */
pnp_write_config(GPIO_DEV, 0xe2, 0x0); /* no inversion */ pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */
pnp_write_config(GPIO_DEV, 0xe5, 0x0); /* no inversion */ pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0=output 1=input */
pnp_write_config(GPIO_DEV, 0xe3, 0x3); /* 0000 0011 0=output 1=input */ pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0=output 1=input */
pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101110 0=output 1=input */ pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */
pnp_write_config(GPIO_DEV, 0xe1, 0x1); /* set output val */ pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */
pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* set output val 1011 0100 */
pnp_exit_ext_func_mode(GPIO_DEV); pnp_exit_ext_func_mode(GPIO_DEV);
} }
@ -198,8 +184,8 @@ void sio_init(void) {
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{ {
// unsigned last_boot_normal_x = last_boot_normal(); /* unsigned last_boot_normal_x = last_boot_normal(); */
//FIXME /* FIXME */
unsigned last_boot_normal_x = 1; unsigned last_boot_normal_x = 1;
sio_init(); sio_init();
@ -209,56 +195,50 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
print_info("now booting... fallback\r\n"); print_info("now booting... fallback\r\n");
/* Is this a cpu only reset? or Is this a secondary cpu? */ /* Is this a CPU only reset? Or is this a secondary CPU? */
if ((cpu_init_detectedx) || (!boot_cpu())) { if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) { if (last_boot_normal_x)
goto normal_image; goto normal_image;
} else { else
goto fallback_image; goto fallback_image;
}
} }
/* Nothing special needs to be done to find bus 0 */ /* Nothing special needs to be done to find bus 0. */
/* Allow the HT devices to be found */ /* Allow the HT devices to be found. */
enumerate_ht_chain(); enumerate_ht_chain();
/* Is this a deliberate reset by the bios */ /* Is this a deliberate reset by the BIOS? */
if (bios_reset_detected() && last_boot_normal_x) { if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image; goto normal_image;
} }
/* This is the primary cpu how should I boot? */ /* This is the primary CPU, how should I boot? */
else if (do_normal_boot()) { else if (do_normal_boot()) {
goto normal_image; goto normal_image;
} else { } else {
goto fallback_image; goto fallback_image;
} }
normal_image:
//print_info("JMP normal image\r\n");
__asm__ volatile ("jmp __normal_image": /* outputs */ normal_image:
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */ /* print_info("JMP normal image\r\n"); */
);
fallback_image: __asm__ __volatile__("jmp __normal_image":
:"a" (bist), "b" (cpu_init_detectedx));
fallback_image:
; ;
} }
#endif #endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
unsigned long cpu_init_detectedx)
{ {
#if USE_FALLBACK_IMAGE == 1 #if USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx); failover_process(bist, cpu_init_detectedx);
#endif #endif
real_main(bist, cpu_init_detectedx); real_main(bist, cpu_init_detectedx);
} }
void real_main(unsigned long bist, unsigned long cpu_init_detectedx) void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{ {
static const uint16_t spd_addr[] = { static const uint16_t spd_addr[] = {
@ -272,8 +252,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
unsigned bsp_apicid = 0; unsigned bsp_apicid = 0;
int needs_reset = 0; int needs_reset = 0;
struct sys_info *sysinfo = struct sys_info *sysinfo =
(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
DCACHE_RAM_GLOBAL_VAR_SIZE);
char *p; char *p;
sio_init(); sio_init();
@ -283,23 +262,25 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
print_info("now booting... real_main\r\n"); print_info("now booting... real_main\r\n");
if (bist == 0) { if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
/* Halt if there was a built in self test failure */ /* Halt if there was a built in self test failure. */
report_bist_failure(bist); report_bist_failure(bist);
setup_default_resource_map(); setup_default_resource_map();
setup_coherent_ht_domain(); setup_coherent_ht_domain();
wait_all_core0_started(); wait_all_core0_started();
print_info("now booting... Core0 started\r\n"); print_info("now booting... Core0 started\r\n");
#if CONFIG_LOGICAL_CPUS==1 #if CONFIG_LOGICAL_CPUS==1
// It is said that we should start core1 after all core0 launched /* It is said that we should start core1 after all core0 launched. */
start_other_cores(); start_other_cores();
wait_all_other_cores_started(bsp_apicid); wait_all_other_cores_started(bsp_apicid);
#endif #endif
init_timer(); init_timer();
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */
enable_fid_change(); enable_fid_change();
init_fidvid_bsp(bsp_apicid); init_fidvid_bsp(bsp_apicid);
@ -307,20 +288,22 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
needs_reset = optimize_link_coherent_ht(); needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo); needs_reset |= optimize_link_incoherent_ht(sysinfo);
/* Fixme it assumes that 1000MHz LDT is selected. */ /* FIXME: Assumes that 1000MHz LDT is selected. */
needs_reset |= k8t890_early_setup_car(16, 0x6); needs_reset |= k8t890_early_setup_car(16, 0x6);
if (needs_reset) { if (needs_reset) {
print_debug("ht reset -\r\n"); print_debug("ht reset -\r\n");
soft_reset(); soft_reset();
} }
/* stop the APs so we can start them later in init */
allow_all_aps_stop(bsp_apicid); /* Stop the APs so we can start them later in init. */
/* It's the time to set ctrl now; */ allow_all_aps_stop(bsp_apicid);
/* It's the time to set ctrl now. */
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
enable_smbus(); enable_smbus();
memreset_setup(); memreset_setup();
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram(); post_cache_as_ram();
} }

1
src/mainboard/asus/a8v-e_se/chip.h
View File

@ -20,5 +20,4 @@
extern struct chip_operations mainboard_asus_a8v_e_se_ops; extern struct chip_operations mainboard_asus_a8v_e_se_ops;
struct mainboard_asus_a8v_e_se_config { struct mainboard_asus_a8v_e_se_config {
}; };

344
src/mainboard/asus/a8v-e_se/dsdt.asl
View File

@ -1,12 +1,11 @@
/* /*
* This file is part of the coreboot project. * This file is part of the coreboot project.
* *
* Minimalist ACPI DSDT table for EPIA-M / MII
* (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com> * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com>
*
* (C) Copyright 2007 Rudolf Marek <r.marek@assembler.cz> * (C) Copyright 2007 Rudolf Marek <r.marek@assembler.cz>
* *
* ISA portions taken from QEMU acpi-dsdt.dsl * ISA portions taken from QEMU acpi-dsdt.dsl.
*
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2 as published by * it under the terms of the GNU General Public License v2 as published by
* the Free Software Foundation. * the Free Software Foundation.
@ -21,16 +20,9 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/ */
DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1) DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1)
{ {
/* Define the main processor.*/
/*
* Define the main processor
*/
Scope (\_PR) Scope (\_PR)
{ {
Processor (\_PR.CPU0, 0x00, 0x000000, 0x00) {} Processor (\_PR.CPU0, 0x00, 0x000000, 0x00) {}
@ -40,15 +32,15 @@ DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1)
/* For now only define 2 power states: /* For now only define 2 power states:
* - S0 which is fully on * - S0 which is fully on
* - S5 which is soft off * - S5 which is soft off
* any others would involve declaring the wake up methods * Any others would involve declaring the wake up methods.
*/ */
Name (\_S0, Package () {0x00, 0x00, 0x00, 0x00 }) Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
Name (\_S5, Package () {0x02, 0x02, 0x00, 0x00 }) Name (\_S5, Package () { 0x02, 0x02, 0x00, 0x00 })
/* Root of the bus hierarchy */ /* Root of the bus hierarchy */
Scope (\_SB) Scope (\_SB)
{ {
/* top PCI device */ /* Top PCI device */
Device (PCI0) Device (PCI0)
{ {
Name (_HID, EisaId ("PNP0A03")) Name (_HID, EisaId ("PNP0A03"))
@ -57,189 +49,161 @@ DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1)
Name (_BBN, 0x00) Name (_BBN, 0x00)
/* PCI Routing Table */ /* PCI Routing Table */
//aaa /* aaa */
Name (_PRT, Package () { Name (_PRT, Package () {
Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, //slot 0xB Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */
Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 },
Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 },
Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 },
Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, //Slot 0xC Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */
Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 },
Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 },
Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 },
Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, //Slot 0xD Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */
Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 },
Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 },
Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 },
Package (0x04) { 0x000F0000, 0x01, 0x00, 0x14 }, //0xf SATA IRQ 20 Package (0x04) { 0x000F0000, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */
Package (0x04) { 0x000F0001, 0x00, 0x00, 0x14 }, //0xf NAtive IDE IRQ 20 Package (0x04) { 0x000F0001, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */
Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, //USB routing Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */
Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 },
Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 },
Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 },
Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, //AC97 MC97 Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, /* AC97, MC97 */
Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, //PCIE16 bridge IRQ27 Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */
Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B },
Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B },
Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B },
Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, //PCIE bridge IRQ31 Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */
Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, //IRQ36 Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */
Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, //IRQ39 Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */
Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } //IRQ43 Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */
})
Device (PEGG)
{
Name (_ADR, 0x00020000)
Name (_UID, 0x00)
Name (_BBN, 0x02)
Name (_PRT, Package () {
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, //PCIE IRQ24-IRQ27
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 },
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A },
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B },
}) })
} //end of PCIEG
Device (PEX0) Device (PEGG)
{ {
Name (_ADR, 0x00030000) Name (_ADR, 0x00020000)
Name (_UID, 0x00) Name (_UID, 0x00)
Name (_BBN, 0x03) Name (_BBN, 0x02)
Name (_PRT, Package () {
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 },
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A },
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B },
})
}
Name (_PRT, Package () { Device (PEX0)
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, //PCIE IRQ28-IRQ31 {
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, Name (_ADR, 0x00030000)
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, Name (_UID, 0x00)
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, Name (_BBN, 0x03)
}) Name (_PRT, Package () {
} //end of PEX0 Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D },
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E },
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F },
})
}
Device (PEX1) Device (PEX1)
{ {
Name (_ADR, 0x00030001) Name (_ADR, 0x00030001)
Name (_UID, 0x00) Name (_UID, 0x00)
Name (_BBN, 0x04) Name (_BBN, 0x04)
Name (_PRT, Package () {
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 },
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 },
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 },
})
}
Name (_PRT, Package () { Device (PEX2)
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, //PCIE IRQ32-IRQ35 {
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, Name (_ADR, 0x00030002)
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, Name (_UID, 0x00)
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, Name (_BBN, 0x05)
}) Name (_PRT, Package () {
} //end f PEX1 Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 },
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 },
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 },
})
}
Device (PEX2) Device (PEX3)
{ {
Name (_ADR, 0x00030002) Name (_ADR, 0x00030003)
Name (_UID, 0x00) Name (_UID, 0x00)
Name (_BBN, 0x05) Name (_BBN, 0x06)
Name (_PRT, Package () {
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, /* PCIE IRQ40-IRQ43 */
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 },
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A },
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B },
})
}
Name (_PRT, Package () { Device (ISA) {
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, //PCIE IRQ36-IRQ39 Name (_ADR, 0x00110000)
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 },
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 },
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 },
})
} //end f PEX2
Device (PEX3) /* PS/2 keyboard (seems to be important for WinXP install) */
{ Device (KBD)
Name (_ADR, 0x00030003) {
Name (_UID, 0x00) Name (_HID, EisaId ("PNP0303"))
Name (_BBN, 0x06) Method (_STA, 0, NotSerialized)
{
Return (0x0f)
}
Method (_CRS, 0, NotSerialized)
{
Name (TMP, ResourceTemplate () {
IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
IRQNoFlags () {1}
})
Return (TMP)
}
}
Name (_PRT, Package () { /* PS/2 mouse */
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, //PCIE IRQ40-IRQ43 Device (MOU)
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 }, {
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A }, Name (_HID, EisaId ("PNP0F13"))
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B }, Method (_STA, 0, NotSerialized)
}) {
} //end f PEX3 Return (0x0f)
}
Method (_CRS, 0, NotSerialized)
{
Name (TMP, ResourceTemplate () {
IRQNoFlags () {12}
})
Return (TMP)
}
}
Device (ISA) { /* PS/2 floppy controller */
Name (_ADR, 0x00110000) Device (FDC0)
{
/* Keyboard seems to be important for WinXP install */ Name (_HID, EisaId ("PNP0700"))
Device (KBD) Method (_STA, 0, NotSerialized)
{ {
Name (_HID, EisaId ("PNP0303")) Return (0x0f)
Method (_STA, 0, NotSerialized) }
{ Method (_CRS, 0, NotSerialized)
Return (0x0f) {
} Name (BUF0, ResourceTemplate () {
IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04)
Method (_CRS, 0, NotSerialized) IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01)
{ IRQNoFlags () {6}
Name (TMP, ResourceTemplate () DMA (Compatibility, NotBusMaster, Transfer8) {2}
{ })
IO (Decode16, Return (BUF0)
0x0060, // Address Range Minimum }
0x0060, // Address Range Maximum }
0x01, // Address Alignment }
0x01, // Address Length
)
IO (Decode16,
0x0064, // Address Range Minimum
0x0064, // Address Range Maximum
0x01, // Address Alignment
0x01, // Address Length
)
IRQNoFlags ()
{1}
})
Return (TMP)
}
}
/* PS/2 mouse */
Device (MOU)
{
Name (_HID, EisaId ("PNP0F13"))
Method (_STA, 0, NotSerialized)
{
Return (0x0f)
}
Method (_CRS, 0, NotSerialized)
{
Name (TMP, ResourceTemplate ()
{
IRQNoFlags () {12}
})
Return (TMP)
}
}
/* PS/2 floppy controller */
Device (FDC0)
{
Name (_HID, EisaId ("PNP0700"))
Method (_STA, 0, NotSerialized)
{
Return (0x0F)
} }
Method (_CRS, 0, NotSerialized) }
{ }
Name (BUF0, ResourceTemplate ()
{
IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04)
IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01)
IRQNoFlags () {6}
DMA (Compatibility, NotBusMaster, Transfer8) {2}
})
Return (BUF0)
}
} //FD END
} //ISA END
} // End of PCI0
} // End of _SB
} // End of Definition Block

18
src/mainboard/asus/a8v-e_se/fadt.c
View File

@ -1,7 +1,8 @@
/* /*
* ACPI - create the Fixed ACPI Description Tables (FADT) * This file is part of the coreboot project.
* (C) Copyright 2004 Nick Barker <nick.barker9@btinternet.com> *
* (C) Copyright 2007 Rudolf Marek <r.marek@assembler.cz> * Copyright (C) 2004 Nick Barker <nick.barker9@btinternet.com>
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as * modify it under the terms of the GNU General Public License as
@ -15,15 +16,17 @@
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software * along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* MA 02110-1301 USA
*/ */
#include <string.h> #include <string.h>
#include <arch/acpi.h> #include <arch/acpi.h>
#include <../../../southbridge/via/vt8237r/vt8237r.h> #include <../../../southbridge/via/vt8237r/vt8237r.h>
void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) /**
* Create the Fixed ACPI Description Tables (FADT) for this board.
*/
void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt)
{ {
acpi_header_t *header = &(fadt->header); acpi_header_t *header = &(fadt->header);
@ -146,6 +149,5 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->x_gpe1_blk.addrl = 0x0; fadt->x_gpe1_blk.addrl = 0x0;
fadt->x_gpe1_blk.addrh = 0x0; fadt->x_gpe1_blk.addrh = 0x0;
header->checksum = header->checksum = acpi_checksum((void *) fadt, sizeof(acpi_fadt_t));
acpi_checksum((void *) fadt, sizeof(acpi_fadt_t));
} }

1
src/mainboard/asus/a8v-e_se/mainboard.c
View File

@ -21,7 +21,6 @@
#include <device/device.h> #include <device/device.h>
#include <device/pci.h> #include <device/pci.h>
#include <device/pci_ids.h> #include <device/pci_ids.h>
#include <device/pci_ops.h>
#include "chip.h" #include "chip.h"
#if CONFIG_CHIP_NAME == 1 #if CONFIG_CHIP_NAME == 1

60
src/mainboard/asus/a8v-e_se/mptable.c
View File

@ -17,43 +17,42 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/ */
#include <arch/smp/mpspec.h>
#include <string.h> #include <string.h>
#include <stdint.h> #include <stdint.h>
#include <arch/smp/mpspec.h>
#include <../../../southbridge/via/vt8237r/vt8237r.h> #include <../../../southbridge/via/vt8237r/vt8237r.h>
#include <../../../southbridge/via/k8t890/k8t890.h> #include <../../../southbridge/via/k8t890/k8t890.h>
void *smp_write_config_table(void *v) void *smp_write_config_table(void *v)
{ {
static const char sig[4] = "PCMP"; static const char sig[4] = "PCMP";
static const char oem[8] = "LNXB "; static const char oem[8] = "LNXB ";
static const char productid[12] = "A8V-E SE "; static const char productid[12] = "A8V-E SE ";
struct mp_config_table *mc; struct mp_config_table *mc;
unsigned int conforms = 0; unsigned int conforms = 0;
int bus_isa = 42; int bus_isa = 42;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
memset(mc, 0, sizeof(*mc)); memset(mc, 0, sizeof(*mc));
memcpy(mc->mpc_signature, sig, sizeof(sig)); memcpy(mc->mpc_signature, sig, sizeof(sig));
mc->mpc_length = sizeof(*mc); /* initially just the header */ mc->mpc_length = sizeof(*mc); /* Initially just the header. */
mc->mpc_spec = 0x04; mc->mpc_spec = 0x04;
mc->mpc_checksum = 0; /* not yet computed */ mc->mpc_checksum = 0; /* Not yet computed. */
memcpy(mc->mpc_oem, oem, sizeof(oem)); memcpy(mc->mpc_oem, oem, sizeof(oem));
memcpy(mc->mpc_productid, productid, sizeof(productid)); memcpy(mc->mpc_productid, productid, sizeof(productid));
mc->mpc_oemptr = 0; mc->mpc_oemptr = 0;
mc->mpc_oemsize = 0; mc->mpc_oemsize = 0;
mc->mpc_entry_count = 0; /* No entries yet... */ mc->mpc_entry_count = 0; /* No entries yet. */
mc->mpc_lapic = LAPIC_ADDR; mc->mpc_lapic = LAPIC_ADDR;
mc->mpe_length = 0; mc->mpe_length = 0;
mc->mpe_checksum = 0; mc->mpe_checksum = 0;
mc->reserved = 0; mc->reserved = 0;
smp_write_processors(mc); smp_write_processors(mc);
/*Bus: Bus ID Type*/ /* Bus: Bus ID Type */
smp_write_bus(mc, 0, "PCI "); smp_write_bus(mc, 0, "PCI ");
smp_write_bus(mc, 1, "PCI "); smp_write_bus(mc, 1, "PCI ");
smp_write_bus(mc, 2, "PCI "); smp_write_bus(mc, 2, "PCI ");
@ -62,12 +61,11 @@ void *smp_write_config_table(void *v)
smp_write_bus(mc, 5, "PCI "); smp_write_bus(mc, 5, "PCI ");
smp_write_bus(mc, 6, "PCI "); smp_write_bus(mc, 6, "PCI ");
smp_write_bus(mc, bus_isa, "ISA "); smp_write_bus(mc, bus_isa, "ISA ");
/*I/O APICs: APIC ID Version State Address*/
/* I/O APICs: APIC ID Version State Address */
smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, VT8237R_APIC_BASE); smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, VT8237R_APIC_BASE);
smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE); smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE);
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, VT8237R_APIC_ID, 0x0); smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, VT8237R_APIC_ID, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, VT8237R_APIC_ID, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, VT8237R_APIC_ID, 0x1);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, VT8237R_APIC_ID, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, VT8237R_APIC_ID, 0x2);
@ -142,14 +140,16 @@ void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13);
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
/* There is no extension information... */ /* There is no extension information... */
/* Compute the checksums */ /* Compute the checksums. */
mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc),
mc->mpe_length);
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
return smp_next_mpe_entry(mc); return smp_next_mpe_entry(mc);
} }