From c565f9910707b91fcc7a27bab28806e558bb474d Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Mon, 19 Sep 2016 16:04:39 -0700 Subject: [PATCH] drivers/i2c/tpm: Split cr50 driver from main driver Originally I thought it would be cleaner to keep this code in one place, but as things continue to diverge it ends up being easier to split this into its own driver. This way the different drivers in coreboot, depthcharge, and the kernel, can all be standalone and if one is changed it is easier to modify the others. This change splits out the cr50 driver and brings along the basic elements from the existing driver with no real change in functionality. The following commits will modify the code to make it consistent so it can all be shared with depthcharge and the linux kernel drivers. BUG=chrome-os-partner:53336 Change-Id: Ia9a65e72519b95f5739e3b7a16b9c2431d64ebe2 Signed-off-by: Duncan Laurie --- src/drivers/i2c/tpm/Kconfig | 13 + src/drivers/i2c/tpm/Makefile.inc | 19 +- src/drivers/i2c/tpm/cr50.c | 466 +++++++++++++++++++++++++++++++ src/drivers/i2c/tpm/tpm.c | 242 +--------------- 4 files changed, 503 insertions(+), 237 deletions(-) create mode 100644 src/drivers/i2c/tpm/cr50.c diff --git a/src/drivers/i2c/tpm/Kconfig b/src/drivers/i2c/tpm/Kconfig index 903fc3bbe5..db77b956b9 100644 --- a/src/drivers/i2c/tpm/Kconfig +++ b/src/drivers/i2c/tpm/Kconfig @@ -2,6 +2,19 @@ config I2C_TPM bool "I2C TPM" depends on TPM || TPM2 +choice + prompt "I2C TPM Driver" + default I2C_TPM_GENERIC + depends on I2C_TPM + +config I2C_TPM_GENERIC + bool "Generic I2C TPM Driver" + +config I2C_TPM_CR50 + bool "CR50 I2C TPM Driver" + +endchoice + config DRIVER_TPM_I2C_BUS hex "I2C TPM chip bus" default 9 # FIXME, workaround for Kconfig BS diff --git a/src/drivers/i2c/tpm/Makefile.inc b/src/drivers/i2c/tpm/Makefile.inc index 3eb5de0518..7fcfc78d56 100644 --- a/src/drivers/i2c/tpm/Makefile.inc +++ b/src/drivers/i2c/tpm/Makefile.inc @@ -1,6 +1,17 @@ -ramstage-$(CONFIG_I2C_TPM) += tis.c tpm.c -romstage-$(CONFIG_I2C_TPM) += tis.c tpm.c -verstage-$(CONFIG_I2C_TPM) += tis.c tpm.c -bootblock-$(CONFIG_I2C_TPM) += tis.c tpm.c + +ramstage-$(CONFIG_I2C_TPM) += tis.c +romstage-$(CONFIG_I2C_TPM) += tis.c +verstage-$(CONFIG_I2C_TPM) += tis.c +bootblock-$(CONFIG_I2C_TPM) += tis.c + +ramstage-$(CONFIG_I2C_TPM_GENERIC) += tpm.c +romstage-$(CONFIG_I2C_TPM_GENERIC) += tpm.c +verstage-$(CONFIG_I2C_TPM_GENERIC) += tpm.c +bootblock-$(CONFIG_I2C_TPM_GENERIC) += tpm.c + +ramstage-$(CONFIG_I2C_TPM_CR50) += cr50.c +romstage-$(CONFIG_I2C_TPM_CR50) += cr50.c +verstage-$(CONFIG_I2C_TPM_CR50) += cr50.c +bootblock-$(CONFIG_I2C_TPM_CR50) += cr50.c ramstage-$(CONFIG_DRIVER_I2C_TPM_ACPI) += chip.c diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c new file mode 100644 index 0000000000..419ac1e68f --- /dev/null +++ b/src/drivers/i2c/tpm/cr50.c @@ -0,0 +1,466 @@ +/* + * Copyright 2016 Google Inc. + * + * Based on Linux Kernel TPM driver by + * Peter Huewe + * Copyright (C) 2011 Infineon Technologies + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * cr50 is a TPM 2.0 capable device that requries special + * handling for the I2C interface. + * + * - Use an interrupt for transaction status instead of hardcoded delays + * - Must use write+wait+read read protocol + * - All 4 bytes of status register must be read/written at once + * - Burst count max is 63 bytes, and burst count behaves + * slightly differently than other I2C TPMs + * - When reading from FIFO the full burstcnt must be read + * instead of just reading header and determining the remainder + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tpm.h" + +#define CR50_MAX_BURSTCOUNT 63 + +#define SLEEP_DURATION 60 /* in usec */ +#define SLEEP_DURATION_LONG 210 /* in usec */ +#define SLEEP_DURATION_SAFE 750 /* in usec */ +#define SLEEP_DURATION_PROBE_MS 1000 /* in msec */ + +#define CR50_DID_VID 0x00281ae0L + +struct tpm_inf_dev { + int bus; + unsigned int addr; + uint8_t buf[TPM_BUFSIZE + sizeof(uint8_t)]; +}; + +static struct tpm_inf_dev g_tpm_dev CAR_GLOBAL; + +/* + * iic_tpm_read() - read from TPM register + * + * @addr: register address to read from + * @buffer: provided by caller + * @len: number of bytes to read + * + * 1) send register address byte 'addr' to the TPM + * 2) wait for TPM to indicate it is ready + * 3) read 'len' bytes of TPM response into the provided 'buffer' + * + * Return -1 on error, 0 on success. + */ +static int iic_tpm_read(uint8_t addr, uint8_t *buffer, size_t len) +{ + struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev); + + if (tpm_dev->addr == 0) + return -1; + + /* Send the register address byte to the TPM */ + if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, &addr, 1)) { + printk(BIOS_ERR, "%s: Address write failed\n", __func__); + return -1; + } + + /* Wait for TPM to be ready with response data */ + udelay(SLEEP_DURATION_SAFE); + + /* Read response data from the TPM */ + if (i2c_read_raw(tpm_dev->bus, tpm_dev->addr, buffer, len)) { + printk(BIOS_ERR, "%s: Read response failed\n", __func__); + return -1; + } + + return 0; +} + +/* + * iic_tpm_write() - write to TPM register + * + * @addr: register address to write to + * @buffer: data to write + * @len: number of bytes to write + * + * 1) prepend the provided address to the provided data + * 2) send the address+data to the TPM + * 3) wait for TPM to indicate it is done writing + * + * Returns -1 on error, 0 on success. + */ +static int iic_tpm_write(uint8_t addr, uint8_t *buffer, size_t len) +{ + struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev); + + if (tpm_dev->addr == 0) + return -1; + if (len > TPM_BUFSIZE) + return -1; + + /* Prepend the 'register address' to the buffer */ + tpm_dev->buf[0] = addr; + memcpy(tpm_dev->buf + 1, buffer, len); + + /* Send write request buffer with address */ + if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, tpm_dev->buf, len + 1)) { + printk(BIOS_ERR, "%s: Error writing to TPM\n", __func__); + return -1; + } + + /* Wait for TPM to be ready */ + udelay(SLEEP_DURATION_SAFE); + + return 0; +} + +static int check_locality(struct tpm_chip *chip, int loc) +{ + uint8_t buf; + + if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0) + return -1; + + if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) { + chip->vendor.locality = loc; + return loc; + } + + return -1; +} + +static void release_locality(struct tpm_chip *chip, int loc, int force) +{ + uint8_t buf; + if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0) + return; + + if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) == + (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) { + buf = TPM_ACCESS_ACTIVE_LOCALITY; + iic_tpm_write(TPM_ACCESS(loc), &buf, 1); + } +} + +static int request_locality(struct tpm_chip *chip, int loc) +{ + uint8_t buf = TPM_ACCESS_REQUEST_USE; + + if (check_locality(chip, loc) >= 0) + return loc; /* we already have the locality */ + + iic_tpm_write(TPM_ACCESS(loc), &buf, 1); + + /* wait for burstcount */ + int timeout = 2 * 1000; /* 2s timeout */ + while (timeout) { + if (check_locality(chip, loc) >= 0) + return loc; + mdelay(TPM_TIMEOUT); + timeout--; + } + + return -1; +} + +/* cr50 requires all 4 bytes of status register to be read */ +static uint8_t cr50_tis_i2c_status(struct tpm_chip *chip) +{ + uint8_t buf[4]; + if (iic_tpm_read(TPM_STS(chip->vendor.locality), + buf, sizeof(buf)) < 0) { + printk(BIOS_ERR, "%s: Failed to read status\n", __func__); + return 0; + } + return buf[0]; +} + +/* cr50 requires all 4 bytes of status register to be written */ +static void cr50_tis_i2c_ready(struct tpm_chip *chip) +{ + uint8_t buf[4] = { TPM_STS_COMMAND_READY }; + iic_tpm_write(TPM_STS(chip->vendor.locality), buf, sizeof(buf)); +} + +/* cr50 uses bytes 3:2 of status register for burst count and + * all 4 bytes must be read */ +static int cr50_wait_burst_status(struct tpm_chip *chip, uint8_t mask, + size_t *burst, int *status) +{ + uint8_t buf[4]; + struct stopwatch sw; + + stopwatch_init_msecs_expire(&sw, 2000); + + while (!stopwatch_expired(&sw)) { + if (iic_tpm_read(TPM_STS(chip->vendor.locality), + buf, sizeof(buf)) != 0) { + printk(BIOS_WARNING, "%s: Read failed\n", __func__); + udelay(SLEEP_DURATION_SAFE); + continue; + } + + *status = buf[0]; + *burst = read_le16(&buf[1]); + + /* Check if mask matches and burst is valid */ + if ((*status & mask) == mask && + *burst > 0 && *burst <= CR50_MAX_BURSTCOUNT) + return 0; + + udelay(SLEEP_DURATION_SAFE); + } + + printk(BIOS_ERR, "%s: Timeout reading burst and status\n", __func__); + return -1; +} + +static int cr50_tis_i2c_recv(struct tpm_chip *chip, uint8_t *buf, + size_t buf_len) +{ + size_t burstcnt, current, len, expected; + uint8_t addr = TPM_DATA_FIFO(chip->vendor.locality); + int status; + int ret = -1; + + if (buf_len < TPM_HEADER_SIZE) + goto out; + + if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0) + goto out; + if (!(status & TPM_STS_DATA_AVAIL)) { + printk(BIOS_ERR, "%s: First chunk not available\n", __func__); + goto out; + } + + /* Read first chunk of burstcnt bytes */ + if (iic_tpm_read(addr, buf, burstcnt) != 0) { + printk(BIOS_ERR, "%s: Read failed\n", __func__); + goto out; + } + + /* Determine expected data in the return buffer */ + expected = read_be32(buf + TPM_RSP_SIZE_BYTE); + if (expected > buf_len) { + printk(BIOS_ERR, "%s: Too much data: %zu > %zu\n", + __func__, expected, buf_len); + goto out; + } + + /* Now read the rest of the data */ + current = burstcnt; + while (current < expected) { + /* Read updated burst count and check status */ + if (cr50_wait_burst_status(chip, TPM_STS_VALID, + &burstcnt, &status) < 0) + goto out; + if (!(status & TPM_STS_DATA_AVAIL)) { + printk(BIOS_ERR, "%s: Data not available\n", __func__); + goto out; + } + + len = min(burstcnt, expected - current); + if (iic_tpm_read(addr, buf + current, len) != 0) { + printk(BIOS_ERR, "%s: Read failed\n", __func__); + goto out; + } + + current += len; + } + + /* Ensure TPM is done reading data */ + if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0) + goto out; + if (status & TPM_STS_DATA_AVAIL) { + printk(BIOS_ERR, "%s: Data still available\n", __func__); + goto out; + } + + ret = current; + +out: + return ret; +} + +static int cr50_tis_i2c_send(struct tpm_chip *chip, uint8_t *buf, size_t len) +{ + int status; + size_t burstcnt, limit, sent = 0; + uint8_t tpm_go[4] = { TPM_STS_GO }; + struct stopwatch sw; + + if (len > TPM_BUFSIZE) + return -1; + + stopwatch_init_msecs_expire(&sw, 2000); + + /* Wait until TPM is ready for a command */ + while (!(cr50_tis_i2c_status(chip) & TPM_STS_COMMAND_READY)) { + if (stopwatch_expired(&sw)) { + printk(BIOS_ERR, "%s: Command ready timeout\n", + __func__); + return -1; + } + + cr50_tis_i2c_ready(chip); + udelay(SLEEP_DURATION_SAFE); + } + + while (len > 0) { + /* Read burst count and check status */ + if (cr50_wait_burst_status(chip, TPM_STS_VALID, + &burstcnt, &status) < 0) + goto out; + if (sent > 0 && !(status & TPM_STS_DATA_EXPECT)) { + printk(BIOS_ERR, "%s: Data not expected\n", __func__); + goto out; + } + + /* Use burstcnt - 1 to account for the address byte + * that is inserted by iic_tpm_write() */ + limit = min(burstcnt - 1, len); + if (iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), + &buf[sent], limit) != 0) { + printk(BIOS_ERR, "%s: Write failed\n", __func__); + goto out; + } + + sent += limit; + len -= limit; + } + + /* Ensure TPM is not expecting more data */ + if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0) + goto out; + if (status & TPM_STS_DATA_EXPECT) { + printk(BIOS_ERR, "%s: Data still expected\n", __func__); + goto out; + } + + /* Start the TPM command */ + if (iic_tpm_write(TPM_STS(chip->vendor.locality), tpm_go, + sizeof(tpm_go)) < 0) { + printk(BIOS_ERR, "%s: Start command failed\n", __func__); + goto out; + } + return sent; + +out: + /* Abort current transaction if still pending */ + if (cr50_tis_i2c_status(chip) & TPM_STS_COMMAND_READY) + cr50_tis_i2c_ready(chip); + return -1; +} + +static void cr50_vendor_init(struct tpm_chip *chip) +{ + memset(&chip->vendor, 0, sizeof(struct tpm_vendor_specific)); + chip->vendor.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID; + chip->vendor.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID; + chip->vendor.req_canceled = TPM_STS_COMMAND_READY; + chip->vendor.status = &cr50_tis_i2c_status; + chip->vendor.recv = &cr50_tis_i2c_recv; + chip->vendor.send = &cr50_tis_i2c_send; + chip->vendor.cancel = &cr50_tis_i2c_ready; +} + +int tpm_vendor_probe(unsigned bus, uint32_t addr) +{ + struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev); + struct stopwatch sw; + uint8_t buf = 0; + int ret; + long sw_run_duration = SLEEP_DURATION_PROBE_MS; + + tpm_dev->bus = bus; + tpm_dev->addr = addr; + + /* Wait for TPM_ACCESS register ValidSts bit to be set */ + stopwatch_init_msecs_expire(&sw, sw_run_duration); + do { + ret = iic_tpm_read(TPM_ACCESS(0), &buf, 1); + if (!ret && (buf & TPM_STS_VALID)) { + sw_run_duration = stopwatch_duration_msecs(&sw); + break; + } + udelay(SLEEP_DURATION_SAFE); + } while (!stopwatch_expired(&sw)); + + printk(BIOS_INFO, + "%s: ValidSts bit %s(%d) in TPM_ACCESS register after %ld ms\n", + __func__, (buf & TPM_STS_VALID) ? "set" : "clear", + (buf & TPM_STS_VALID) >> 7, sw_run_duration); + + /* Claim failure if the ValidSts (bit 7) is clear */ + if (!(buf & TPM_STS_VALID)) + return -1; + + return 0; +} + +int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr) +{ + struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev); + uint32_t vendor; + + if (dev_addr == 0) { + printk(BIOS_ERR, "%s: missing device address\n", __func__); + return -1; + } + + tpm_dev->bus = bus; + tpm_dev->addr = dev_addr; + + cr50_vendor_init(chip); + + /* Disable interrupts (not supported) */ + chip->vendor.irq = 0; + + if (request_locality(chip, 0) != 0) + return -1; + + /* Read four bytes from DID_VID register */ + if (iic_tpm_read(TPM_DID_VID(0), (uint8_t *)&vendor, 4) < 0) + goto out_err; + + if (vendor != CR50_DID_VID) { + printk(BIOS_DEBUG, "Vendor ID 0x%08x not recognized\n", vendor); + goto out_err; + } + + printk(BIOS_DEBUG, "cr50 TPM %u:%02x (device-id 0x%X)\n", + tpm_dev->bus, tpm_dev->addr, vendor >> 16); + + chip->is_open = 1; + return 0; + +out_err: + release_locality(chip, 0, 1); + return -1; +} + +void tpm_vendor_cleanup(struct tpm_chip *chip) +{ + release_locality(chip, chip->vendor.locality, 1); +} diff --git a/src/drivers/i2c/tpm/tpm.c b/src/drivers/i2c/tpm/tpm.c index 6b96774f60..55c25fefa4 100644 --- a/src/drivers/i2c/tpm/tpm.c +++ b/src/drivers/i2c/tpm/tpm.c @@ -45,7 +45,6 @@ #define SLEEP_DURATION 60 /* in usec */ #define SLEEP_DURATION_LONG 210 /* in usec */ -#define SLEEP_DURATION_SAFE 750 /* in usec */ #define SLEEP_DURATION_PROBE_MS 1000 /* in msec */ /* max. number of iterations after I2C NAK for 'long' commands @@ -58,19 +57,16 @@ /* expected value for DIDVID register */ #define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L #define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L -#define TPM_TIS_I2C_DID_VID_CR50 0x00281ae0L enum i2c_chip_type { SLB9635, SLB9645, - CR50, UNKNOWN, }; static const char * const chip_name[] = { [SLB9635] = "slb9635tt", [SLB9645] = "slb9645tt", - [CR50] = "cr50", [UNKNOWN] = "unknown/fallback to slb9635", }; @@ -111,7 +107,6 @@ static int iic_tpm_read(uint8_t addr, uint8_t *buffer, size_t len) switch (tpm_dev->chip_type) { case SLB9635: - case CR50: case UNKNOWN: /* slb9635 protocol should work in both cases */ for (count = 0; count < MAX_COUNT; count++) { @@ -474,211 +469,6 @@ out_err: return -1; } -/* - * cr50 is a TPM 2.0 capable device that requries special - * handling for the I2C interface. - * - * - Timeouts need to be longer - * - Must use the older SLB9635 style write+wait+read read protocol - * - All 4 bytes of status register must be read at once - * - Burst count max is 63 bytes, and burst count behaves - * slightly differently than other I2C TPMs - * - When reading from FIFO the full burstcnt must be read - * instead of just reading header and determining the remainder - */ - -/* cr50 max burst count */ -#define CR50_MAX_BURSTCOUNT 63 - -/* cr50 requires all 4 bytes of status register to be read */ -static uint8_t cr50_tis_i2c_status(struct tpm_chip *chip) -{ - uint8_t buf[4]; - if (iic_tpm_read(TPM_STS(chip->vendor.locality), - buf, sizeof(buf)) < 0) { - printk(BIOS_ERR, "%s: Failed to read status\n", __func__); - return 0; - } - return buf[0]; -} - -/* cr50 requires all 4 bytes of status register to be written */ -static void cr50_tis_i2c_ready(struct tpm_chip *chip) -{ - uint8_t buf[4] = { TPM_STS_COMMAND_READY }; - iic_tpm_write_long(TPM_STS(chip->vendor.locality), buf, sizeof(buf)); -} - -/* cr50 uses bytes 3:2 of status register for burst count and - * all 4 bytes must be read */ -static int cr50_wait_burst_status(struct tpm_chip *chip, uint8_t mask, - size_t *burst, int *status) -{ - uint8_t buf[4]; - struct stopwatch sw; - - stopwatch_init_msecs_expire(&sw, 2000); - - while (!stopwatch_expired(&sw)) { - if (iic_tpm_read(TPM_STS(chip->vendor.locality), - buf, sizeof(buf)) != 0) { - printk(BIOS_WARNING, "%s: Read failed\n", __func__); - udelay(SLEEP_DURATION_SAFE); - continue; - } - - *status = buf[0]; - *burst = read_le16(&buf[1]); - - /* Check if mask matches and burst is valid */ - if ((*status & mask) == mask && - *burst > 0 && *burst <= CR50_MAX_BURSTCOUNT) - return 0; - - udelay(SLEEP_DURATION_SAFE); - } - - printk(BIOS_ERR, "%s: Timeout reading burst and status\n", __func__); - return -1; -} - -static int cr50_tis_i2c_recv(struct tpm_chip *chip, uint8_t *buf, - size_t buf_len) -{ - size_t burstcnt, current, len, expected; - uint8_t addr = TPM_DATA_FIFO(chip->vendor.locality); - int status; - int ret = -1; - - if (buf_len < TPM_HEADER_SIZE) - goto out; - - if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0) - goto out; - if (!(status & TPM_STS_DATA_AVAIL)) { - printk(BIOS_ERR, "%s: First chunk not available\n", __func__); - goto out; - } - - /* Read first chunk of burstcnt bytes */ - if (iic_tpm_read(addr, buf, burstcnt) != 0) { - printk(BIOS_ERR, "%s: Read failed\n", __func__); - goto out; - } - - /* Determine expected data in the return buffer */ - expected = read_be32(buf + TPM_RSP_SIZE_BYTE); - if (expected > buf_len) { - printk(BIOS_ERR, "%s: Too much data: %zu > %zu\n", - __func__, expected, buf_len); - goto out; - } - - /* Now read the rest of the data */ - current = burstcnt; - while (current < expected) { - /* Read updated burst count and check status */ - if (cr50_wait_burst_status(chip, TPM_STS_VALID, - &burstcnt, &status) < 0) - goto out; - if (!(status & TPM_STS_DATA_AVAIL)) { - printk(BIOS_ERR, "%s: Data not available\n", __func__); - goto out; - } - - len = min(burstcnt, expected - current); - if (iic_tpm_read(addr, buf + current, len) != 0) { - printk(BIOS_ERR, "%s: Read failed\n", __func__); - goto out; - } - - current += len; - } - - /* Ensure TPM is done reading data */ - if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0) - goto out; - if (status & TPM_STS_DATA_AVAIL) { - printk(BIOS_ERR, "%s: Data still available\n", __func__); - goto out; - } - - ret = current; - -out: - return ret; -} - -static int cr50_tis_i2c_send(struct tpm_chip *chip, uint8_t *buf, size_t len) -{ - int status; - size_t burstcnt, limit, sent = 0; - uint8_t tpm_go[4] = { TPM_STS_GO }; - struct stopwatch sw; - - if (len > TPM_BUFSIZE) - return -1; - - stopwatch_init_msecs_expire(&sw, 2000); - - /* Wait until TPM is ready for a command */ - while (!(cr50_tis_i2c_status(chip) & TPM_STS_COMMAND_READY)) { - if (stopwatch_expired(&sw)) { - printk(BIOS_ERR, "%s: Command ready timeout\n", - __func__); - return -1; - } - - cr50_tis_i2c_ready(chip); - udelay(SLEEP_DURATION_SAFE); - } - - while (len > 0) { - /* Read burst count and check status */ - if (cr50_wait_burst_status(chip, TPM_STS_VALID, - &burstcnt, &status) < 0) - goto out; - if (sent > 0 && !(status & TPM_STS_DATA_EXPECT)) { - printk(BIOS_ERR, "%s: Data not expected\n", __func__); - goto out; - } - - /* Use burstcnt - 1 to account for the address byte - * that is inserted by iic_tpm_write() */ - limit = min(burstcnt - 1, len); - if (iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), - &buf[sent], limit) != 0) { - printk(BIOS_ERR, "%s: Write failed\n", __func__); - goto out; - } - - sent += limit; - len -= limit; - } - - /* Ensure TPM is not expecting more data */ - if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0) - goto out; - if (status & TPM_STS_DATA_EXPECT) { - printk(BIOS_ERR, "%s: Data still expected\n", __func__); - goto out; - } - - /* Start the TPM command */ - if (iic_tpm_write(TPM_STS(chip->vendor.locality), tpm_go, - sizeof(tpm_go)) < 0) { - printk(BIOS_ERR, "%s: Start command failed\n", __func__); - goto out; - } - return sent; - -out: - /* Abort current transaction if still pending */ - if (cr50_tis_i2c_status(chip) & TPM_STS_COMMAND_READY) - cr50_tis_i2c_ready(chip); - return -1; -} - /* Initialization of I2C TPM */ int tpm_vendor_probe(unsigned bus, uint32_t addr) @@ -692,8 +482,8 @@ int tpm_vendor_probe(unsigned bus, uint32_t addr) tpm_dev->chip_type = UNKNOWN; tpm_dev->bus = bus; tpm_dev->addr = addr; - tpm_dev->sleep_short = SLEEP_DURATION_SAFE; - tpm_dev->sleep_long = SLEEP_DURATION_SAFE * 2; + tpm_dev->sleep_short = SLEEP_DURATION; + tpm_dev->sleep_long = SLEEP_DURATION_LONG; /* * Probe TPM. Check if the TPM_ACCESS register's ValidSts bit is set(1) @@ -706,7 +496,7 @@ int tpm_vendor_probe(unsigned bus, uint32_t addr) sw_run_duration = stopwatch_duration_msecs(&sw); break; } - udelay(SLEEP_DURATION_SAFE); + udelay(SLEEP_DURATION); } while (!stopwatch_expired(&sw)); printk(BIOS_INFO, @@ -736,10 +526,8 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr) tpm_dev->chip_type = UNKNOWN; tpm_dev->bus = bus; tpm_dev->addr = dev_addr; - - /* Use conservative values to read chip id */ - tpm_dev->sleep_short = SLEEP_DURATION_SAFE; - tpm_dev->sleep_long = SLEEP_DURATION_SAFE * 2; + tpm_dev->sleep_short = SLEEP_DURATION; + tpm_dev->sleep_long = SLEEP_DURATION_LONG; memset(&chip->vendor, 0, sizeof(struct tpm_vendor_specific)); chip->is_open = 1; @@ -747,6 +535,10 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr) chip->vendor.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID; chip->vendor.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID; chip->vendor.req_canceled = TPM_STS_COMMAND_READY; + chip->vendor.status = &tpm_tis_i2c_status; + chip->vendor.recv = &tpm_tis_i2c_recv; + chip->vendor.send = &tpm_tis_i2c_send; + chip->vendor.cancel = &tpm_tis_i2c_ready; /* Disable interrupts (not supported) */ chip->vendor.irq = 0; @@ -762,27 +554,11 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr) tpm_dev->chip_type = SLB9645; } else if (be32_to_cpu(vendor) == TPM_TIS_I2C_DID_VID_9635) { tpm_dev->chip_type = SLB9635; - } else if (vendor == TPM_TIS_I2C_DID_VID_CR50) { - tpm_dev->chip_type = CR50; } else { printk(BIOS_DEBUG, "Vendor ID 0x%08x not recognized.\n", vendor); goto out_err; } - if (tpm_dev->chip_type == CR50) { - chip->vendor.status = &cr50_tis_i2c_status; - chip->vendor.recv = &cr50_tis_i2c_recv; - chip->vendor.send = &cr50_tis_i2c_send; - chip->vendor.cancel = &cr50_tis_i2c_ready; - } else { - tpm_dev->sleep_short = SLEEP_DURATION; - tpm_dev->sleep_long = SLEEP_DURATION_LONG; - chip->vendor.status = &tpm_tis_i2c_status; - chip->vendor.recv = &tpm_tis_i2c_recv; - chip->vendor.send = &tpm_tis_i2c_send; - chip->vendor.cancel = &tpm_tis_i2c_ready; - } - printk(BIOS_DEBUG, "I2C TPM %u:%02x (chip type %s device-id 0x%X)\n", tpm_dev->bus, tpm_dev->addr, chip_name[tpm_dev->chip_type], vendor >> 16);