mb/google/kohaku: Update overridetree.cb
Add common SoC config. Disable PCIe WiFi. Add digitizer. Turn off native SD card interface. No WWAN. Add DA7219 driver to Kconfig. BUG=b:130310626 BRANCH=none TEST=compiles (no Hatch ref or Kohaku device to test) Change-Id: I17d5ba6ce4ec412384e4a1678474b8d26499ba40 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
This commit is contained in:
Tim Wawrzynczak
Furquan Shaikh
parent
40dee3d506
commit
c60a830e44
|
|
@ -3,6 +3,7 @@ config BOARD_GOOGLE_BASEBOARD_HATCH
|
|||
def_bool n
|
||||
select DRIVERS_GENERIC_GPIO_KEYS
|
||||
select DRIVERS_GENERIC_MAX98357A
|
||||
select DRIVERS_I2C_DA7219
|
||||
select DRIVERS_I2C_GENERIC
|
||||
select DRIVERS_I2C_HID
|
||||
select DRIVERS_I2C_SX9310
|
||||
|
|
|
|||
|
|
@ -201,7 +201,7 @@ chip soc/intel/cannonlake
|
|||
device pci 16.4 off end # Management Engine Interface 3
|
||||
device pci 16.5 off end # Management Engine Interface 4
|
||||
device pci 17.0 on end # SATA
|
||||
device pci 19.0 on end #I2C #4
|
||||
device pci 19.0 on end # I2C #4
|
||||
device pci 19.1 off end # I2C #5
|
||||
device pci 19.2 off end # UART #2
|
||||
device pci 1a.0 off end # eMMC
|
||||
|
|
|
|||
|
|
@ -1,12 +1,11 @@
|
|||
chip soc/intel/cannonlake
|
||||
|
||||
register "SerialIoDevMode" = "{
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoPci,
|
||||
[PchSerialIoIndexSPI0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexSPI1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexSPI2] = PchSerialIoDisabled,
|
||||
|
|
@ -15,7 +14,101 @@ chip soc/intel/cannonlake
|
|||
[PchSerialIoIndexUART2] = PchSerialIoDisabled,
|
||||
}"
|
||||
|
||||
device domain 0 on
|
||||
end
|
||||
# No PCIe WiFi
|
||||
register "PcieRpEnable[13]" = "0"
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| I2C0 | Trackpad |
|
||||
#| I2C1 | Touchscreen |
|
||||
#| I2C2 | Digitizer |
|
||||
#| I2C4 | Audio |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[1] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[2] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[4] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.gspi[0] = {
|
||||
.speed_mhz = 1,
|
||||
.early_init = 1,
|
||||
},
|
||||
}"
|
||||
|
||||
device domain 0 on
|
||||
device pci 14.0 on
|
||||
chip drivers/usb/acpi
|
||||
device usb 0.0 on
|
||||
chip drivers/usb/acpi
|
||||
device usb 2.5 off end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
device usb 3.4 off end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device pci 14.5 off end # SDCard
|
||||
|
||||
device pci 15.0 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""PNP0C50""
|
||||
register "generic.desc" = ""Synaptics Touchpad""
|
||||
# TODO: enable this when b/123967687 is fixed.
|
||||
# register "generic.wake" = "GPE0_DW2_27"
|
||||
# also set next line to ACPI_IRQ_WAKE_EDGE_LOW
|
||||
register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D21_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "hid_desc_reg_offset" = "0x20"
|
||||
device i2c 0x2c on end
|
||||
end
|
||||
end # I2C 0
|
||||
|
||||
device pci 15.2 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""WCOM50C1""
|
||||
register "generic.desc" = ""WCOM Digitizer""
|
||||
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A10)"
|
||||
register "generic.reset_delay_ms" = "1"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x1"
|
||||
device i2c 0x09 on end
|
||||
end
|
||||
end # I2C #2
|
||||
device pci 19.0 on
|
||||
chip drivers/i2c/da7219
|
||||
# TODO: these settings were copied from another board
|
||||
# with the same chip. verify the settings
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H0_IRQ)"
|
||||
register "btn_cfg" = "50"
|
||||
register "mic_det_thr" = "500"
|
||||
register "jack_ins_deb" = "20"
|
||||
register "jack_det_rate" = ""32ms_64ms""
|
||||
register "jack_rem_deb" = "1"
|
||||
register "a_d_btn_thr" = "0xa"
|
||||
register "d_b_btn_thr" = "0x16"
|
||||
register "b_c_btn_thr" = "0x21"
|
||||
register "c_mic_btn_thr" = "0x3e"
|
||||
register "btn_avg" = "4"
|
||||
register "adc_1bit_rpt" = "1"
|
||||
register "micbias_lvl" = "2600"
|
||||
register "mic_amp_in_sel" = ""diff""
|
||||
device i2c 0x1a on end
|
||||
end
|
||||
end
|
||||
|
||||
# No PCIe WiFi
|
||||
device pci 1d.5 off end
|
||||
end # domain
|
||||
end
|
||||
|
|
|
|||
Loading…
Reference in New Issue