mb/google/kohaku: Update overridetree.cb

Add common SoC config.
Disable PCIe WiFi.
Add digitizer.
Turn off native SD card interface.
No WWAN.

Add DA7219 driver to Kconfig.

BUG=b:130310626
BRANCH=none
TEST=compiles (no Hatch ref or Kohaku device to test)

Change-Id: I17d5ba6ce4ec412384e4a1678474b8d26499ba40
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>

src/mainboard/google/hatch/Kconfig

@@ -3,6 +3,7 @@ config BOARD_GOOGLE_BASEBOARD_HATCH
 	def_bool n
 	select DRIVERS_GENERIC_GPIO_KEYS
 	select DRIVERS_GENERIC_MAX98357A
+	select DRIVERS_I2C_DA7219
 	select DRIVERS_I2C_GENERIC
 	select DRIVERS_I2C_HID
 	select DRIVERS_I2C_SX9310

src/mainboard/google/hatch/variants/baseboard/devicetree.cb

@@ -201,7 +201,7 @@ chip soc/intel/cannonlake
 		device pci 16.4 off end # Management Engine Interface 3
 		device pci 16.5 off end # Management Engine Interface 4
 		device pci 17.0 on  end # SATA
-		device pci 19.0 on  end #I2C #4
+		device pci 19.0 on  end # I2C #4
 		device pci 19.1 off end # I2C #5
 		device pci 19.2 off end # UART #2
 		device pci 1a.0 off end # eMMC

src/mainboard/google/hatch/variants/kohaku/overridetree.cb

@@ -1,12 +1,11 @@
 chip soc/intel/cannonlake
-
 	register "SerialIoDevMode" = "{
-		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C0] = PchSerialIoPci,
-		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C1] = PchSerialIoPci,
-		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C2] = PchSerialIoPci,
-		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C3] = PchSerialIoPci,
-		[PchSerialIoIndexI2C4]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C4] = PchSerialIoPci,
-		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C5] = PchSerialIoPci,
 		[PchSerialIoIndexSPI0] = PchSerialIoPci,
 		[PchSerialIoIndexSPI1] = PchSerialIoPci,
 		[PchSerialIoIndexSPI2] = PchSerialIoDisabled,
@@ -15,7 +14,101 @@ chip soc/intel/cannonlake
 		[PchSerialIoIndexUART2] = PchSerialIoDisabled,
 	}"
 
-	device domain 0 on
+	# No PCIe WiFi
-	end
+	register "PcieRpEnable[13]" = "0"
 
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field	     |	Value			 |
+	#+-------------------+---------------------------+
+	#| I2C0		     | Trackpad			 |
+	#| I2C1		     | Touchscreen		 |
+	#| I2C2		     | Digitizer		 |
+	#| I2C4		     | Audio			 |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[4] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.gspi[0] = {
+		       .speed_mhz = 1,
+		       .early_init = 1,
+		},
+	}"
+
+	device domain 0 on
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						device usb 2.5 off end
+					end
+					chip drivers/usb/acpi
+						device usb 3.4 off end
+					end
+				end
+			end
+		end
+		device pci 14.5 off end # SDCard
+
+		device pci 15.0 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""PNP0C50""
+				register "generic.desc" = ""Synaptics Touchpad""
+				# TODO: enable this when b/123967687 is fixed.
+				# register "generic.wake" = "GPE0_DW2_27"
+				# also set next line to ACPI_IRQ_WAKE_EDGE_LOW
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D21_IRQ)"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0x20"
+				device i2c 0x2c on end
+			end
+		end # I2C 0
+
+		device pci 15.2 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""WCOM50C1""
+				register "generic.desc" = ""WCOM Digitizer""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A10)"
+				register "generic.reset_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0x09 on end
+			end
+		end # I2C #2
+		device pci 19.0 on
+			chip drivers/i2c/da7219
+				# TODO: these settings were copied from another board
+				# with the same chip. verify the settings
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H0_IRQ)"
+				register "btn_cfg" = "50"
+				register "mic_det_thr" = "500"
+				register "jack_ins_deb" = "20"
+				register "jack_det_rate" = ""32ms_64ms""
+				register "jack_rem_deb" = "1"
+				register "a_d_btn_thr" = "0xa"
+				register "d_b_btn_thr" = "0x16"
+				register "b_c_btn_thr" = "0x21"
+				register "c_mic_btn_thr" = "0x3e"
+				register "btn_avg" = "4"
+				register "adc_1bit_rpt" = "1"
+				register "micbias_lvl" = "2600"
+				register "mic_amp_in_sel" = ""diff""
+				device i2c 0x1a on end
+			end
+		end
+
+		# No PCIe WiFi
+		device pci 1d.5 off end
+	end # domain
 end