diff --git a/util/flashrom/board_enable.c b/util/flashrom/board_enable.c index 0e72c2c01a..84c6e3afe7 100644 --- a/util/flashrom/board_enable.c +++ b/util/flashrom/board_enable.c @@ -153,7 +153,8 @@ static int it8716f_spi_command(uint16_t port, unsigned char writecnt, unsigned c return 1; } /* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note: - We can't use writecnt directly, but have to use a strange encoding */ + * We can't use writecnt directly, but have to use a strange encoding + */ outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port); do { busy = inb(port) & 0x80; @@ -202,43 +203,39 @@ int probe_spi(struct flashchip *flash) /* * Helper functions for many Winbond Super I/Os of the W836xx range. */ -#define W836_INDEX 0x2E -#define W836_DATA 0x2F - /* Enter extended functions */ -static void w836xx_ext_enter(void) +static void w836xx_ext_enter(uint16_t port) { - outb(0x87, W836_INDEX); - outb(0x87, W836_INDEX); + outb(0x87, port); + outb(0x87, port); } /* Leave extended functions */ -static void w836xx_ext_leave(void) +static void w836xx_ext_leave(uint16_t port) { - outb(0xAA, W836_INDEX); + outb(0xAA, port); } /* General functions for reading/writing Winbond Super I/Os. */ -static unsigned char wbsio_read(unsigned char index) +static unsigned char wbsio_read(uint16_t index, uint8_t reg) { - outb(index, W836_INDEX); - return inb(W836_DATA); + outb(reg, index); + return inb(index+1); } -static void wbsio_write(unsigned char index, unsigned char data) +static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data) { - outb(index, W836_INDEX); - outb(data, W836_DATA); + outb(reg, index); + outb(data, index+1); } -static void wbsio_mask(unsigned char index, unsigned char data, - unsigned char mask) +static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask) { - unsigned char tmp; + uint8_t tmp; - outb(index, W836_INDEX); - tmp = inb(W836_DATA) & ~mask; - outb(tmp | (data & mask), W836_DATA); + outb(reg, index); + tmp = inb(index+1) & ~mask; + outb(tmp | (data & mask), index+1); } /** @@ -248,36 +245,79 @@ static void wbsio_mask(unsigned char index, unsigned char data, * - Agami Aruma * - IWILL DK8-HTX */ -static int w83627hf_gpio24_raise(const char *name) +static int w83627hf_gpio24_raise(uint16_t index, const char *name) { - w836xx_ext_enter(); + w836xx_ext_enter(index); /* Is this the w83627hf? */ - if (wbsio_read(0x20) != 0x52) { /* SIO device ID register */ + if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID register */ fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n", - name, wbsio_read(0x20)); - w836xx_ext_leave(); + name, wbsio_read(index, 0x20)); + w836xx_ext_leave(index); return -1; } /* PIN89S: WDTO/GP24 multiplex -> GPIO24 */ - wbsio_mask(0x2B, 0x10, 0x10); + wbsio_mask(index, 0x2B, 0x10, 0x10); - wbsio_write(0x07, 0x08); /* Select logical device 8: GPIO port 2 */ + wbsio_write(index, 0x07, 0x08); /* Select logical device 8: GPIO port 2 */ - wbsio_mask(0x30, 0x01, 0x01); /* Activate logical device. */ + wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */ - wbsio_mask(0xF0, 0x00, 0x10); /* GPIO24 -> output */ + wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */ - wbsio_mask(0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */ + wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */ - wbsio_mask(0xF1, 0x10, 0x10); /* Raise GPIO24 */ + wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */ - w836xx_ext_leave(); + w836xx_ext_leave(index); return 0; } +static int w83627hf_gpio24_raise_2e(const char *name) +{ + return w83627hf_gpio24_raise(0x2d, name); +} + +/** + * Winbond W83627THF: GPIO 4, bit 4 + * + * Suited for: + * - MSI K8N-NEO3 + */ +static int w83627thf_gpio4_4_raise(uint16_t index, const char *name) +{ + w836xx_ext_enter(index); + /* Is this the w83627thf? */ + if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID register */ + fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n", + name, wbsio_read(index, 0x20)); + w836xx_ext_leave(index); + return -1; + } + + /* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */ + + wbsio_write(index, 0x07, 0x09); /* Select logical device 9: GPIO port 4 */ + + wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */ + + wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */ + + wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */ + + wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */ + + w836xx_ext_leave(index); + + return 0; +} + +static int w83627thf_gpio4_4_raise_4e(const char *name) +{ + return w83627thf_gpio4_4_raise(0x4E, name); +} /** * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. * @@ -335,12 +375,12 @@ static int board_asus_a7v8x_mx(const char *name) pci_write_byte(dev, 0x59, val); /* Raise ROM MEMW# line on Winbond w83697 SuperIO */ - w836xx_ext_enter(); + w836xx_ext_enter(0x2E); - if (!(wbsio_read(0x24) & 0x02)) /* flash rom enabled? */ - wbsio_mask(0x24, 0x08, 0x08); /* enable MEMW# */ + if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* flash rom enabled? */ + wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* enable MEMW# */ - w836xx_ext_leave(); + w836xx_ext_leave(0x2E); return 0; } @@ -487,9 +527,11 @@ struct board_pciid_enable board_pciid_enables[] = { {0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "gigabyte", "m57sli", "GIGABYTE GA-M57SLI", it87xx_probe_serial_flash}, {0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise}, + "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise_2e}, + {0x10de, 0x005e, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + "msi", "k8n-neo3", "MSI K8N Neo3", w83627thf_gpio4_4_raise_4e}, {0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000, - "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise}, + "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, @@ -509,8 +551,8 @@ struct board_pciid_enable board_pciid_enables[] = { * Match boards on LinuxBIOS table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ -static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, - char *part) +static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, + char *part) { struct board_pciid_enable *board = board_pciid_enables; @@ -525,10 +567,11 @@ static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, continue; if (board->second_vendor && - !pci_dev_find(board->second_vendor, board->second_device)) + !pci_dev_find(board->second_vendor, board->second_device)) continue; return board; } + printf("NOT FOUND %s:%s\n", vendor, part); return NULL; } @@ -545,20 +588,20 @@ static struct board_pciid_enable *board_match_pci_card_ids(void) continue; if (!pci_card_find(board->first_vendor, board->first_device, - board->first_card_vendor, - board->first_card_device)) + board->first_card_vendor, + board->first_card_device)) continue; if (board->second_vendor) { if (board->second_card_vendor) { if (!pci_card_find(board->second_vendor, - board->second_device, - board->second_card_vendor, - board->second_card_device)) + board->second_device, + board->second_card_vendor, + board->second_card_device)) continue; } else { if (!pci_dev_find(board->second_vendor, - board->second_device)) + board->second_device)) continue; } } @@ -582,7 +625,7 @@ int board_flash_enable(char *vendor, char *part) if (board) { printf("Found board \"%s\": Enabling flash write... ", - board->name); + board->name); ret = board->enable(board->name); if (ret) diff --git a/util/flashrom/jedec.c b/util/flashrom/jedec.c index cb4f6cd322..49b1002004 100644 --- a/util/flashrom/jedec.c +++ b/util/flashrom/jedec.c @@ -281,7 +281,7 @@ int write_jedec(struct flashchip *flash, uint8_t *buf) // dumb check if erase was successful. for (i = 0; i < total_size; i++) { if (bios[i] != (uint8_t) 0xff) { - printf("ERASE FAILED\n"); + printf("ERASE FAILED @%d, val %02x\n", i, bios[i]); return -1; } }