mainboard/asus/kfsn4-dre: Enable W83793 fan controller

The Winbond W83793 fan controller is not automatically
configured correctly on power application, leading to
abnormal, and in some cases random, fan behaviour.

This commit enables the controller and sets sane default
values.

TEST: Booted mainboard and verified that the correct number
of fan speed sensors were visible from hwmon under Linux.
Also verified that, unlike before, the CPU fans were running
at a high enough speed to properly cool the CPUs.  Verified
the 8 fan outputs under direct control of the W83793 device.
Verified voltage and temperature sensors and limits via output
of the 'sensors' command.

Change-Id: Ie3753bd3111d9d9eb46826da410c132caec4d9fe
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8503
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This commit is contained in:
Timothy Pearson 2015-02-21 01:46:20 -06:00 committed by Alexandru Gagniuc
parent d3e31be8c5
commit c684d05b0f
3 changed files with 89 additions and 0 deletions

View File

@ -20,6 +20,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select ENABLE_APIC_EXT_ID select ENABLE_APIC_EXT_ID
select AMDMCT select AMDMCT
select MMCONF_SUPPORT_DEFAULT select MMCONF_SUPPORT_DEFAULT
select DRIVERS_I2C_W83793
select DRIVERS_XGI_Z9S select DRIVERS_XGI_Z9S
select MAINBOARD_HAS_NATIVE_VGA_INIT select MAINBOARD_HAS_NATIVE_VGA_INIT
select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG

View File

@ -75,6 +75,78 @@ chip northbridge/amd/amdfam10/root_complex # Root complex
chip drivers/generic/generic # DIMM n-1-1-1 chip drivers/generic/generic # DIMM n-1-1-1
device i2c 57 on end device i2c 57 on end
end end
chip drivers/i2c/w83793
register "mfc" = "0x29" # Enable FANIN1/FANIN12, FANIN9/FANIN10, and FANIN8/FANCTRL8 inputs
register "fanin" = "0x7f" # Enable monitoring of FANIN6 - FANIN12
register "fanin_sel" = "0x0f" # Connect FANIN9 - FANIN12 to pins 37 - 40
register "peci_agent_conf" = "0x33" # Set Intel CPU PECI agent domain (not used by AMD but may affect chip operation)
register "tcase0" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation)
register "tcase1" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation)
register "tcase2" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation)
register "tcase3" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation)
register "tr_enable" = "0x03" # Enable montoring of TR1 and TR2
register "td_mode_select" = "0x05" # Use internal temperature sensors and disable unconnected TD3/TD4
register "td1_critical_temperature" = "85" # Set TD1 (CPU0) critical temperature to 85°C
register "td1_critical_hysteresis" = "80" # Set TD1 (CPU0) critical hysteresis temperature to 80°C
register "td1_warning_temperature" = "70" # Set TD1 (CPU0) warning temperature to 70°C
register "td1_warning_hysteresis" = "65" # Set TD1 (CPU0) warning hysteresis temperature to 65°C
register "td2_critical_temperature" = "85" # Set TD2 (CPU1) critical temperature to 85°C
register "td2_critical_hysteresis" = "80" # Set TD2 (CPU1) critical hysteresis temperature to 80°C
register "td2_warning_temperature" = "70" # Set TD2 (CPU1) warning temperature to 70°C
register "td2_warning_hysteresis" = "65" # Set TD2 (CPU1) warning hysteresis temperature to 65°C
register "tr1_critical_temperature" = "60" # Set TR1 (mainboard) critical temperature to 60°C
register "tr1_critical_hysteresis" = "55" # Set TR1 (mainboard) critical hysteresis temperature to 55°C
register "tr1_warning_temperature" = "50" # Set TR1 (mainboard) warning temperature to 50°C
register "tr1_warning_hysteresis" = "45" # Set TR1 (mainboard) warning hysteresis temperature to 45°C
register "critical_temperature" = "80" # Set critical temperature to 80°C
register "fanctrl1" = "0x48" # Set Fan 4 and Fan 7 to output buffer mode, all others to open drain
register "fanctrl2" = "0x01" # Set Fan 4 to Fan 7 to output buffer mode, Fan 1 to DC mode
register "first_valid_fan_number" = "2" # Fan 1/Fan 2 controls and sensors are not connected to anything
register "td1_fan_select" = "0x00" # All fans to manual mode (no dependence on TD1)
register "td2_fan_select" = "0x00" # All fans to manual mode (no dependence on TD2)
register "td3_fan_select" = "0x00" # All fans to manual mode (no dependence on TD3)
register "td4_fan_select" = "0x00" # All fans to manual mode (no dependence on TD4)
register "tr1_fan_select" = "0x00" # All fans to manual mode (no dependence on TR1)
register "tr2_fan_select" = "0x00" # All fans to manual mode (no dependence on TR2)
register "fan1_nonstop" = "7" # Set Fan 1 minimum speed
register "fan2_nonstop" = "7" # Set Fan 2 minimum speed
register "fan3_nonstop" = "7" # Set Fan 3 minimum speed
register "fan4_nonstop" = "7" # Set Fan 4 minimum speed
register "fan5_nonstop" = "7" # Set Fan 5 minimum speed
register "fan6_nonstop" = "7" # Set Fan 6 minimum speed
register "fan7_nonstop" = "7" # Set Fan 7 minimum speed
register "fan8_nonstop" = "7" # Set Fan 8 minimum speed
register "default_speed" = "100" # All fans to full speed on power up
register "fan1_duty" = "100" # Fan 1 to full speed
register "fan2_duty" = "100" # Fan 2 to full speed
register "fan3_duty" = "100" # Fan 3 to full speed
register "fan4_duty" = "100" # Fan 4 to full speed
register "fan5_duty" = "100" # Fan 5 to full speed
register "fan6_duty" = "100" # Fan 6 to full speed
register "fan7_duty" = "100" # Fan 7 to full speed
register "fan8_duty" = "100" # Fan 8 to full speed
register "vcorea_high_limit_mv" = "1500" # VCOREA (Node 0) high limit to 1.5V
register "vcorea_low_limit_mv" = "900" # VCOREA (Node 0) low limit to 0.9V
register "vcoreb_high_limit_mv" = "1500" # VCOREB (Node 1) high limit to 1.5V
register "vcoreb_low_limit_mv" = "900" # VCOREB (Node 1) low limit to 0.9V
register "vtt_high_limit_mv" = "1250" # VTT (HT link voltage) high limit to 1.25V
register "vtt_low_limit_mv" = "1150" # VTT (HT link voltage) low limit to 1.15V
register "vsen1_high_limit_mv" = "1900" # VSEN1 (Node 0 RAM voltage) high limit to 1.9V
register "vsen1_low_limit_mv" = "1700" # VSEN1 (Node 0 RAM voltage) low limit to 1.7V
register "vsen2_high_limit_mv" = "1900" # VSEN2 (Node 1 RAM voltage) high limit to 1.9V
register "vsen2_low_limit_mv" = "1700" # VSEN2 (Node 1 RAM voltage) low limit to 1.7V
register "vsen3_high_limit_mv" = "3500" # VSEN3 (+3.3V) high limit to 3.5V
register "vsen3_low_limit_mv" = "3100" # VSEN3 (+3.3V) low limit to 3.1V
register "vsen4_high_limit_mv" = "1070" # VSEN4 (+12V, scaling factor ~12.15) high limit to 13V
register "vsen4_low_limit_mv" = "905" # VSEN4 (+12V, scaling factor ~12.15) low limit to 11V
register "vdd_high_limit_mv" = "5200" # 5VDD high limit to 5.2V
register "vdd_low_limit_mv" = "4800" # 5VDD low limit to 4.8V
register "vsb_high_limit_mv" = "5200" # 5VSB high limit to 5.2V
register "vsb_low_limit_mv" = "4800" # 5VSB low limit to 4.8V
register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V
register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V
device i2c 0x2f on end
end
end end
device pci 1.1 on end # SM 1 device pci 1.1 on end # SM 1
device pci 2.0 on end # USB 1.1 device pci 2.0 on end # USB 1.1

View File

@ -23,6 +23,22 @@ After probing with a custom GPIO-flipping tool under Linux the following GPIO ma
CK804 pin W2 <--> GPIO43 CK804 pin W2 <--> GPIO43
CK804 pin W3 <--> GPIO44 CK804 pin W3 <--> GPIO44
====================================================================================================
W83793 (U46)
====================================================================================================
Sensor mappings:
FRNT_FAN1: FAN3
FRNT_FAN2: FAN4
FRNT_FAN3: FAN5
FRNT_FAN4: FAN6
FRNT_FAN5: FAN9
FRNT_FAN6: FAN10
REAR_FAN1: FAN7
REAR_FAN2: FAN8
REAR_FAN3: FAN11
REAR_FAN4: FAN12
==================================================================================================== ====================================================================================================
Other hardware Other hardware
==================================================================================================== ====================================================================================================