soc/mediatek/mt8186: Add mtcmos init support

Add mtcmos to support display and audio.

TEST=build pass
BUG=b:202871018

Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Change-Id: Ib9d41d47f235376f524c3ff78f1fcc069cbc60cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>

src/soc/mediatek/mt8186/Makefile.inc

@@ -40,6 +40,7 @@ ramstage-y += ../common/auxadc.c
 ramstage-y += emi.c
 ramstage-y += ../common/flash_controller.c
 ramstage-y += ../common/gpio.c gpio.c
+ramstage-y += ../common/mtcmos.c mtcmos.c
 ramstage-y += ../common/i2c.c i2c.c
 ramstage-y += ../common/mcu.c
 ramstage-y += ../common/mmu_operations.c ../common/mmu_cmops.c

src/soc/mediatek/mt8186/include/soc/spm.h

@@ -10,6 +10,7 @@
 
 #include <device/mmio.h>
 #include <soc/addressmap.h>
+#include <soc/mtcmos.h>
 #include <types.h>
 
 #define SPM_INIT_DONE_US		20
@@ -140,7 +141,7 @@ DEFINE_BIT(SYS_TIMER_START_EN_LSB, 0)
 				 PCM_SW_INT0)
 
 struct mtk_spm_regs {
-	uint32_t poweron_config_en;
+	uint32_t poweron_config_set;
 	uint32_t spm_power_on_val0;
 	uint32_t spm_power_on_val1;
 	uint32_t spm_clk_con;
@@ -833,6 +834,8 @@ struct pwr_ctrl {
 	/* Auto-gen End */
 };
 
+check_member(mtk_spm_regs, poweron_config_set, 0x0);
+check_member(mtk_spm_regs, dis_pwr_con, 0x354);
 check_member(mtk_spm_regs, ap_mdsrc_req, 0x430);
 check_member(mtk_spm_regs, ssusb_top_pwr_con, 0x9F0);
 check_member(mtk_spm_regs, ssusb_top_p1_pwr_con, 0x9F4);
@@ -853,6 +856,19 @@ struct dyna_load_pcm {
 
 static struct mtk_spm_regs *const mtk_spm = (void *)SPM_BASE;
 
+static const struct power_domain_data disp[] = {
+	{
+		.pwr_con = &mtk_spm->dis_pwr_con,
+		.pwr_sta_mask = 0x1 << 21,
+		.sram_pdn_mask = 0x1 << 8,
+		.sram_ack_mask = 0x1 << 12,
+	},
+};
+
+/* without audio mtcmos control in MT8186 */
+static const struct power_domain_data audio[] = {
+};
+
 int spm_init(void);
 
 #endif  /* SOC_MEDIATEK_MT8186_SPM_H */

src/soc/mediatek/mt8186/mtcmos.c

@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/mmio.h>
+#include <soc/infracfg.h>
+#include <soc/mtcmos.h>
+
+enum {
+	DISP_PROT_STEP_2_MASK		= 0x00000C06,
+	DISP_PROT_STEP_1_MASK		= 0x00001800,
+};
+
+void mtcmos_protect_display_bus(void)
+{
+	write32(&mt8186_infracfg_ao->infra_topaxi_protecten_clr,
+		DISP_PROT_STEP_2_MASK);
+	write32(&mt8186_infracfg_ao->infra_topaxi_protecten_1_clr,
+		DISP_PROT_STEP_1_MASK);
+}
+
+void mtcmos_protect_audio_bus(void)
+{
+	/* No need to do protection since MT8186 doesn't have audio mtcmos. */
+}

src/soc/mediatek/mt8186/spm.c

@@ -384,7 +384,7 @@ static void spm_hw_s1_state_monitor(int en)
 static void spm_register_init(void)
 {
 	/* Enable register control */
-	write32(&mtk_spm->poweron_config_en,
+	write32(&mtk_spm->poweron_config_set,
 		SPM_REGWR_CFG_KEY | BCLK_CG_EN_LSB);
 
 	/* Init power control register */