diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c
deleted file mode 100644
index 3f9c70fe10..0000000000
--- a/src/northbridge/via/vx800/examples/chipset_init.c
+++ /dev/null
@@ -1,1241 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#if CONFIG_HAVE_ACPI_RESUME
-#include <arch/acpi.h>
-#endif
-#include "../vx800.h"
-
-#include <arch/io.h>
-#include "pci_rawops.h"
-
-static const struct VIA_PCI_REG_INIT_TABLE mSbStage1InitTbl[] = {
-	// Combine Stage1 registers
-	{0x00, 0xFF, SB_LPC_REG(0x41), 0x40, 0x40},
-
-	// Acpi init registers in sb stage1
-	{0x00, 0xFF, SB_LPC_REG(0x40), 0x04, 0x04},	// Enable 4D0/4D1 support
-	{0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08},	// Enable RTC port 74/75
-	{0x00, 0xFF, SB_LPC_REG(0x51), 0x0D, 0x0D},	// and KBC
-	{0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09},	// Enable Serial IRQ
-	{0x00, 0xFF, SB_LPC_REG(0x67), 0x00, 0x04},	// Set FERR voltage to 1.5v
-	{0x00, 0xFF, SB_LPC_REG(0x98), 0xFF, 0x00},	// Disable GP3 Timer
-
-	{0x00, 0xFF, SB_IDEC_REG(0xb9), 0x01, 0x01},
-
-	{0x00, 0xFF, SB_VLINK_REG(0xE6), 0xFF, 0x39},	// Enable SMM A-Seg, MSI and Io APIC
-	///// SPI-BAR.
-	//// SPI_BASE_ADDRESS = 0xFED1 0000
-	{0x00, 0xFF, SB_LPC_REG(0xBC), 0xFF, 0x00},
-	{0x00, 0xFF, SB_LPC_REG(0xBD), 0xFF, 0xD1},
-	{0x00, 0xFF, SB_LPC_REG(0xBE), 0xFF, 0xFE},
-//      {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBC), 0xFF, 0x00},//this , for the different macro
-//      {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBD), 0xFF, 0xD1},
-//      {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBE), 0xFF, 0xFE},
-	///// End of 2008-04-17
-
-	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = {
-	// D0F0: AGP Feature. For 3353, No AGP Feature
-
-	// D0F2~D0F3 is configured by MemoryInit Peim
-
-	// D0F4: NB PMU
-	{ 0x00, 0xFF, NB_PMU_REG(0x84), 0x00, 0xDB },
-	{ 0x00, 0xFF, NB_PMU_REG(0x85), 0x00, 0x05 },
-	{ 0x00, 0xFF, NB_PMU_REG(0x89), 0x00, 0xF8 },
-	{ 0x00, 0xFF, NB_PMU_REG(0x8B), 0x00, 0xBF },
-	{ 0x00, 0xFF, NB_PMU_REG(0x8D), 0x00, 0xFC },
-	{ 0x00, 0xFF, NB_PMU_REG(0x8E), 0x00, 0x19 },
-	{ 0x00, 0xFF, NB_PMU_REG(0x8F), 0x03, 0x00 },
-	{ 0x00, 0xFF, NB_PMU_REG(0x90), 0x00, 0xFF },
-	{ 0x00, 0xFF, NB_PMU_REG(0x91), 0x00, 0xFF },
-	{ 0x00, 0xFF, NB_PMU_REG(0x92), 0x00, 0xCC },
-	{ 0x00, 0xFF, NB_PMU_REG(0xA0), 0x00, 0x80 },
-	{ 0x00, 0xFF, NB_PMU_REG(0xA1), 0x00, 0xE0 },
-	{ 0x00, 0xFF, NB_PMU_REG(0xA2), 0x00, 0xD6 },
-	{ 0x00, 0xFF, NB_PMU_REG(0xA3), 0x00, 0x80 },
-	{ 0x00, 0xFF, NB_PMU_REG(0xA8), 0x00, 0x20 },
-
-	// D0F5: NB APIC, PXPTRF and MSGC
-	//Note: the Rx6A, RCRBH Base Address, is not set, which is related to PCIE Root Complex.
-	//Note: the Rx60, Extended CFG Address. Support and Rx61, Extended CFG Address, are set by NB Peim that is in the PEI Phase.
-	//Note: the Rx42, APIC Interrupt((BT_INTR)) Control, is set by NB Peim that is in PEI phase.
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x50), 0x00, 0x00 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x54), 0x00, 0x80 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x55), 0x00, 0x04 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x58), 0x00, 0x00 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x59), 0x00, 0x02 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x5E), 0x00, 0x00 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x5F), 0x00, 0x06 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x80), 0x00, 0x18 },	//Set RVC1DM, RTHBHIT, RUWRDYD, RUPRRDY1, RUWPOPHD to 1.
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x82), 0x00, 0x00 },	//Set RVC1RPSW, RVC1RQ1T to 1.
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x83), 0x00, 0x81 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0 },
-	{ 0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01 },	// RWAKEEN
-	//{ 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00 }, //RTDNP2B32EN
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20 },
-	{ 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00 },	//RP2P1ABORT
-
-
-// fine-tune
-// If no settings, C7 will hang or reboot in XP, but CN will not.
-	{ 0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00 },
-	{ 0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03 },
-	{ 0x00, 0xFF, NB_HOST_REG(0x54), 0x04, 0x00 },
-	{ 0x00, 0xFF, NB_HOST_REG(0x55), 0x04, 0x00 },
-	{ 0x00, 0xFF, NB_HOST_REG(0x59), 0x09, 0x01 },
-	{ 0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10 },
-	{ 0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08 },
-	{ 0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04 },	// ACPI Base addr
-	{ 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01 },	// APIC MSI
-	{ 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00 },	// APIC MSI
-	//GTL
-	{ 0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66 },
-	{ 0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33 },
-	{ 0x00, 0xFF, NB_HOST_REG(0xB3), 0xFF, 0x33 },
-	{ 0x00, 0xFF, NB_HOST_REG(0xBC), 0xFF, 0x33 },
-	{ 0x00, 0xFF, NB_HOST_REG(0xBD), 0xFF, 0x33 },
-	{ 0x00, 0xFF, NB_HOST_REG(0xC5), 0x30, 0x20 },
-	{ 0x00, 0xFF, NB_HOST_REG(0xC8), 0x10, 0x00 },
-
-
-	// End of Table
-	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mBusControllerInitTable[] = {
-	// D17F0: LPC
-	{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x44, 0x44 },	//  Enable I/O Recovery Time,  4D0/4D1 Support
-	{ 0x00, 0xFF, SB_LPC_REG(0x42), 0xF8, 0xF0 },	//  ENLBUF, GINTREN, FLUSHEN, RBRSTRD
-	{ 0x00, 0xFF, SB_LPC_REG(0x43), 0x0F, 0x0B },	//  RENDTX, ENWBTO, ENRBTO
-	//{ 0x00, 0xFF, SB_LPC_REG(0x46), 0x00, 0x10 },     // It is related to INTH#
-	//{ 0x00, 0xFF, SB_LPC_REG(0x48), 0x00, 0x0C },      //RMRPW, RIRPW  // Reserved in 409 by Eric
-
-	// Internal RTC, Mouse, Keyboard // set in PEI by Eric
-	//{ 0x00, 0xFF, SB_LPC_REG(0x51), 0x10, 0x0D },      // Enable Internal RTC, Internal PS2 Mouse/Keyboard
-
-	// RTC
-	{ 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x01 },	//RTC Rx32 Map to Centrury Byte
-
-	//{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x02 },    // RDMEGAS
-	//{ 0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08 },  // Enable RTC port 74/75, ENEXRTC // set in PEI by Eric
-
-	// Serial IRQ  // set in PEI by Eric
-	//{ 0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09 },    // Enable Serial IRQ, Start Frame Width is 6 PCI Clock.
-
-	// Enable 4D0h/4D1h Port
-	//{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x04 },    // EISAXT // set in PEI by Eric
-
-	// Config ROM Interface
-	// Enable SPI/Set SPI Memory Base Address
-	// It is initialized in PEI Phase
-
-	// Subsystem ID/Vendor ID Back Door
-	{ 0x00, 0xFF, SB_LPC_REG(0x70), 0xFF, 0x06 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x71), 0xFF, 0x11 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x72), 0xFF, 0x09 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x73), 0xFF, 0x34 },
-
-	{ 0x00, 0xFF, SB_LPC_REG(0x4C), 0xC0, 0x40 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x5B), 0x00, 0x51 },	// Orgin value 0x53, modify for 409 by Eric
-	{ 0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01 },
-
-
-	{ 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00 },	// Setting PCI device enable
-	{ 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00 },	// Setting PCI device enable
-	{ 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00 },	// Setting HDAC enable
-	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mPCI1InitTable[] = {
-	//PCI1 Programming Sequence
-	//(1)Configure D17F7
-	{ 0x00, 0xFF, SB_VLINK_REG(0x04), 0x00, 0x03 },
-	{ 0x00, 0xFF, SB_VLINK_REG(0x0C), 0x00, 0x08 },	// Reserved in 409 by Eric
-	{ 0x00, 0xFF, SB_VLINK_REG(0x4F), 0x40, 0x41 },	//RENPPB, RP2CFLSH
-	{ 0x00, 0xFF, SB_VLINK_REG(0x77), 0x00, 0x48 },	//ROP2CFLSH, RFFTMR[1:0]. ROP2CFLSH work with Rx4F[0](RP2CFLSH) assertion
-	// { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x80 },      //RSUB_DEC_P2P, RSUBDECOD(Window xp). If Bit7 is set, PCI lock will occured.
-	// { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x81 },      //RSUB_DEC_P2P, RSUBDECOD(Window Vista)
-	//(2)Configure D19F0
-	{ 0x00, 0xFF, SB_P2PB_REG(0x04), 0x00, 0x07 },
-
-	//(3)Performance Recommended Setting
-
-	//Save Power
-	{ 0x00, 0xFF, SB_VLINK_REG(0xE2), 0x1F, 0x01 },
-	{ 0x00, 0xFF, SB_VLINK_REG(0xE3), 0xF1, 0x5E },
-	{ 0x00, 0xFF, SB_VLINK_REG(0x74), 0x40, 0x00 },
-	//Enhence Host To PCI cycle performance and PCI-To-Host Cycle performance
-	{ 0x00, 0xFF, SB_VLINK_REG(0x70), 0x00, 0x82 },
-	{ 0x00, 0xFF, SB_VLINK_REG(0x71), 0x30, 0xC0 },
-	{ 0x00, 0xFF, SB_VLINK_REG(0x72), 0x00, 0xEE },
-
-	//Cycle Control
-	{ 0x00, 0xFF, SB_VLINK_REG(0x73), 0x00, 0x01 },
-	{ 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x0C },
-	//Arbitration control
-	{ 0x00, 0xFF, SB_VLINK_REG(0x75), 0x00, 0x0F },
-	{ 0x00, 0xFF, SB_VLINK_REG(0x76), 0x00, 0xD0 },
-	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mCCAInitTable[] = {
-	{ 0x00, 0xFF, SB_VLINK_REG(0xFC), 0x02, 0x08 },	//RVWREQ, ROABKDOOR
-
-	//CCA's Register Programming sequence
-	{ 0x00, 0xFF, SB_VLINK_REG(0x50), 0x00, 0x08 },	//Config Azalia's upstream cycle high priority and other low priority
-	{ 0x00, 0xFF, SB_VLINK_REG(0x51), 0x40, 0x80 },	//Disable bypass asynchronous circuit
-	{ 0x00, 0xFF, SB_VLINK_REG(0x52), 0x00, 0x11 },	// Set SM Internal Device and HDAC Occupy Timer
-	{ 0x00, 0xFF, SB_VLINK_REG(0x53), 0x00, 0x11 },	// Set SM Internal Device and HDAC Promote Timer
-	{ 0x00, 0xFF, SB_VLINK_REG(0x54), 0xFF, 0x02 },	//Use SB internal devices's original REQ
-	{ 0x00, 0xFF, SB_VLINK_REG(0x73), 0x10, 0x00 },	//RPINOWSC. Enable APIC Cycle Block P2C Write Cycle
-	{ 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x3C },	//RLCKXP2C, RFSBVK.
-	{ 0x00, 0xFF, SB_VLINK_REG(0xE1), 0x07, 0x00 },	//RBLKAPIC, RAZC3
-	{ 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x04, 0x02 },	//RNMIFSB, RFSBVK
-	{ 0x00, 0xFF, SB_VLINK_REG(0xE0), 0xF0, 0x90 },	//RCCA_NEWCLK, RCCA_CLKON. Use New dynamic clock scheme
-	{ 0x00, 0xFF, SB_VLINK_REG(0xE7), 0xFF, 0x00 },	//Let CCA use dynamic clock.
-	//The CCA is also relate to D17F0
-	//{ 0x00, 0xFF, SB_LPC_REG(0x49), 0x1F, 0x00 },       //Disable CCA Test Mode
-	{ 0x00, 0xFF, SB_LPC_REG(0x74), 0xFF, 0x00 },	// Let DMA cycles from internal devices directly go to NB // Reserved in 409 by Eric
-	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE IDEC_INIT[] = {
-	//{0x00, 0xFF, SB_IDEC_REG(0x09), 0x00, 0x05}, //set to native mode
-	{0x00, 0xFF, SB_IDEC_REG(0x04), 0x00, 0x07},
-	//{0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F},
-	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mSbApicInitTable[] = {
-	{ 0x00, 0xFF, SB_LPC_REG(0x4D), 0x04, 0x00 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x5B), 0x0E, 0x00 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x6C), 0x08, 0x00 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x40 },
-	{ 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x04 },
-	//{ 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F },
-	{ 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },	// End of Table
-};
-
-void AcpiInit(void)
-{
-	device_t_raw rawdevice = 0;
-	u8 sbchiprev;
-	rawdevice = PCI_RAWDEV(0, 0x11, 0);
-	// Set the PMIO base io address
-	pci_rawmodify_config16(rawdevice, 0x88, VX800_ACPI_IO_BASE,
-			       0xff80);
-	// Enable PMIO
-	pci_rawmodify_config16(rawdevice, 0x80, 0x8000, 0x8000);
-	// Enable Soft Resume
-	outw(inw(VX800_ACPI_IO_BASE + 0x04) | 0x8000,
-	     VX800_ACPI_IO_BASE + 0x04);
-
-	// Get SB Revision
-	sbchiprev = pci_rawread_config8(rawdevice, 0xf6);
-	printk(BIOS_DEBUG, "SB chip revision =%x\n", sbchiprev);
-
-	// Fill Register Table
-	via_pci_inittable(sbchiprev, mSbStage1InitTbl);
-
-	// Close all SMI/Io Traps
-	outb(0x00, VX800_ACPI_IO_BASE + 0x42);
-}
-
-void Stage2NbInit(void)
-{
-	device_t_raw rawdevice = 0;
-	u8 nbchiprev;
-	u32 subid = 0;
-	rawdevice = PCI_RAWDEV(0, 0, 4);
-	nbchiprev = pci_rawread_config8(rawdevice, 0xf6);
-	printk(BIOS_DEBUG, "NB chip revision =%x\n", nbchiprev);
-
-	via_pci_inittable(nbchiprev, mNbStage2InitTable);
-
-	rawdevice = PCI_RAWDEV(0, 0, 0);
-
-	subid = PCI_DEVICE_ID_VIA_VX855_D0F0 << 16 + PCI_VENDOR_ID_VIA;
-	pci_rawwrite_config32(rawdevice, 0x2C, subid);
-
-	//vx855 NB no pcie bus
-	//vx855 NB no apic
-}
-
-void IDECSupportOption(u8 sbchiprev)
-{
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0, 0x08);
-
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x00, 0x80);
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x0A, 0x01, 0xFF);
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x80, 0x00);
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x40, 0x02, 0x00);
-
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x00, 0x05);	//COMPATIBLE MODE
-//      pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x05, 0x05);//native MODE
-
-	via_pci_inittable(sbchiprev, IDEC_INIT);
-}
-
-void InitIDEC(u8 sbchiprev)
-{
-	IDECSupportOption(sbchiprev);
-}
-
-void InitUHCI(u8 Number, u8 bEnable)
-{
-	u8 Mask, Value;
-	u16 D16;
-	u8 BaseAddress;
-	u8 BitShift;
-	// USB Device 16
-	// Function : Number
-	//         0      :      0
-	//         1      :      1
-	//         2      :      2
-	// The BitShift is got from Datasheet.
-
-	switch (Number) {
-	case 0:
-		BaseAddress = 0;
-		BitShift = 4;
-		break;
-	case 1:
-		BaseAddress = 1;
-		BitShift = 5;
-		break;
-	case 2:
-	default:
-		BaseAddress = 2;
-		BitShift = 2;
-		break;
-	}
-
-	if (bEnable) {
-		Mask = 0x1 << BitShift;
-		Value = 0x0;
-	} else {
-		Mask = 0x0;
-		Value = 0x1 << BitShift;
-	}
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask);
-
-
-	if (bEnable) {
-		D16 = 0;
-		pci_rawwrite_config16(PCI_RAWDEV(0, 0x10, BaseAddress),
-				      0x20, D16);
-
-		// Config some Control Register
-		Mask = 0x00;
-		Value = 0x12;
-
-		pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress),
-				      0x41, Value, Mask);
-		Mask = 0x00;
-		Value = 0xEB;
-		pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress),
-				      0x4B, Value, Mask);
-	}
-	return;
-}
-
-static const struct VIA_PCI_REG_INIT_TABLE mEHCIInitTable[] = {
-	//EHCI
-	{ 0x00, 0xFF, SB_EHCI_REG(0x43), 0x00, 0xC0 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x50), 0x00, 0x80 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x48), 0x20, 0x9E },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x49), 0x10, 0x68 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x4B), 0x00, 0x69 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x4D), 0x00, 0x94 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x52), 0x08, 0x00 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x5A), 0x00, 0x8A },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x5B), 0x00, 0x89 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x5C), 0x00, 0x03 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x5D), 0x00, 0x9A },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x5E), 0x00, 0x00 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x6B), 0x00, 0x00 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x6D), 0x00, 0x00 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x6F), 0xF0, 0x00 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x4E), 0x01, 0x01 },
-	{ 0x00, 0xFF, SB_EHCI_REG(0x4F), 0x00, 0x11 },
-	{ 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },	// End of Table
-};
-
-void InitEHCI(u8 Number, u8 bEnable)
-{
-	u8 Mask, Value;
-	u8 EHCIRevision;
-
-	if (bEnable) {
-		Mask = 0x1 << 1;
-		Value = 0x0;
-	} else {
-		Mask = 0x0;
-		Value = 0x1 << 1;
-	}
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask);
-
-
-	if (bEnable) {
-		// Get Chipset Revision
-		EHCIRevision =
-		    pci_rawread_config8(PCI_RAWDEV(0, 0x10, 4), 0xF6);
-		printk(BIOS_DEBUG, "EHCI Revision =%x\n", EHCIRevision);
-		via_pci_inittable(EHCIRevision, mEHCIInitTable);
-	}
-}
-
-#define TRUE  1
-void InitUSBC(u8 sbchiprev)
-{
-	InitUHCI(0, TRUE);
-	InitUHCI(1, TRUE);
-	InitUHCI(2, TRUE);
-	InitEHCI(0, TRUE);
-}
-
-void WriteSbApicIndexedReg(u8 Idx, u32 Data)
-{
-	u32 Data32;
-	u32 ApicIdxAdr = VX800SB_APIC_BASE;
-	u32 ApicDataAdr = VX800SB_APIC_BASE + VX800SB_APIC_DATA_OFFSET;
-	*((u8 *) ApicIdxAdr) = Idx;
-	Data32 = (*((u32 *) ApicDataAdr));	//this read is needed when write APIC ID ,dont know why.
-	Data32 = Data;
-	*((u32 *) ApicDataAdr) = Data32;
-}
-
-void SbApicMmioRegInit(void)
-{
-	u32 Offset;
-	WriteSbApicIndexedReg(3, 1);
-	WriteSbApicIndexedReg(0, 4);
-	for (Offset = 0x10; Offset < VX800SB_APIC_ENTRY_NUMBER;
-	     Offset += 2) {
-		WriteSbApicIndexedReg(Offset + 1, 0);
-		WriteSbApicIndexedReg(Offset, 0x10000);
-	}
-}
-
-void SbApicInit(u8 sbchiprev)
-{
-	via_pci_inittable(sbchiprev, mSbApicInitTable);
-	SbApicMmioRegInit();
-}
-
-void SbAcpiInit(void)
-{
-	u8 Mask, Value;
-	// Enable ACPI
-	Mask = 0x01;
-	Value = 0x01;
-	io_rawmodify_config8(VX800_ACPI_IO_BASE + 0x04, Value, Mask);
-}
-
-#define HPET_ENABLE_BIT			0x80
-#define R_SB_HPET_CONTROL		0x68
-#define HPET_BASE_ADDRESS		0xFED0	// 0xFED00000
-#define R_SB_HPET_ADDRESS		0x69
-
-void HpetInit(void)
-{
-	u8 HpetEnable = HPET_ENABLE_BIT;
-	u16 HpetBase = HPET_BASE_ADDRESS;
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_HPET_CONTROL,
-			     HpetEnable);
-	pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0),
-			      R_SB_HPET_ADDRESS + 1, HpetBase);
-}
-
-static const struct VIA_PCI_REG_INIT_TABLE mPMUInitTable[] = {
-	// Power Management
-	{ 0x00, 0xFF, SB_LPC_REG(0x80), 0x00, 0x20 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x8C), 0x02, 0x00 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x8D), 0x00, 0x18 },
-
-	//Miscellaneous Configuration 1
-	{ 0x00, 0xFF, SB_LPC_REG(0x94), 0xF0, 0x28 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x95), 0x00, 0xC1 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x96), 0xFF, 0x10 },
-	{ 0x00, 0xFF, SB_LPC_REG(0x97), 0x00, 0xB2 },
-
-	//Voltage Change Function Enable
-	{ 0x00, 0xFF, SB_LPC_REG(0x9F), 0x00, 0x21 },
-	//Internal PCIe and NM PLL Control
-	{ 0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA },
-
-	{ 0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80 },
-	{ 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },	// End of Table
-};
-
-void InitPMU(u8 sbchiprev)
-{
-	u8 Mask, Value;
-	// Set PMU Registers
-	via_pci_inittable(sbchiprev, mPMUInitTable);
-
-
-	// Set SCI IRQ and its level trigger
-	Mask = 0x0F;
-	Value = 0x09;
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x82, Value, Mask);
-
-	Mask = 0x02;
-	Value = 0x02;
-	io_rawmodify_config8(0x4d1, Value, Mask);
-}
-
-#define R_SB_MULTI_FUNCTION_SELECT_1  0xE4
-#define R_SB_CX_STATE_BREAK_EVENT_ENABLE_1  0xE6
-#define PMIO_PROCESSOR_CONTROL  0x26
-#define R_SB_PCI_ARBITRATION_2      0x76
-#define R_SB_AUTO_SWITCH_P_STATE        0x8A
-
-void InitCPUCStatueSupport()
-{
-	u8 Mask, Value;
-
-	// Config Cx State
-	// Now it is C2 & C4 Up Down Mode
-	Mask = 0xFF;
-	Value = 0x30;
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_CX_STATE_BREAK_EVENT_ENABLE_1, Value, Mask);	//SB_LPC_REG
-
-	Mask = 0xFF;
-	Value = 0x1F;
-	io_rawmodify_config8(VX800_ACPI_IO_BASE + PMIO_PROCESSOR_CONTROL,
-			     Value, Mask);
-
-	Mask = 0x00;
-	Value = 0x80;
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 7), R_SB_PCI_ARBITRATION_2, Value, Mask);	//SB_VLINK_REG
-
-	Mask = 0xFF;
-	Value = 0x00;
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_MULTI_FUNCTION_SELECT_1, Value, Mask);	//SB_VLINK_REG
-
-	Mask = 0xFF;
-	Value = 0x1F;
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_AUTO_SWITCH_P_STATE, Value, Mask);	//SB_VLINK_REG
-}
-
-void InitSBPM(u8 sbchiprev)
-{
-	InitPMU(sbchiprev);
-	SbAcpiInit();
-	InitCPUCStatueSupport();
-}
-
-void Stage2SbInit(void)
-{
-	device_t_raw rawdevice = 0;
-	u8 sbchiprev;
-
-	rawdevice = PCI_RAWDEV(0, 11, 0);
-	sbchiprev = pci_rawread_config8(rawdevice, 0xf6);
-	printk(BIOS_DEBUG, "SB chip revision =%x\n", sbchiprev);
-
-	//SBBasicInit
-	via_pci_inittable(sbchiprev, mBusControllerInitTable);
-	via_pci_inittable(sbchiprev, mPCI1InitTable);
-	via_pci_inittable(sbchiprev, mCCAInitTable);
-
-
-	InitIDEC(sbchiprev);
-
-	InitUSBC(sbchiprev);
-
-	InitSBPM(sbchiprev);
-
-	SbApicInit(sbchiprev);
-
-	HpetInit();
-
-	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0);//SB_VLINK_REG
-
-}
-
-void init_VIA_chipset(void)
-{
-	printk(BIOS_DEBUG, "In: init_VIA_chipset\n");
-	//1.nbstage1 is done in raminit.
-	//2.sbstage1
-	AcpiInit();
-	//3.nbstage2
-	Stage2NbInit();
-
-	//4.sbstage2
-	Stage2SbInit();
-
-	//5.open hdac
-	pci_rawmodify_config32(PCI_RAWDEV(0, 0x11, 7), 0xd1, 0, 0x04);
-	printk(BIOS_DEBUG, "End: init_VIA_chipset\n");
-}
-
-/**
- * @brief Main function of the DRAM part of coreboot.
- *
- * Coreboot is divided into Pre-DRAM part and DRAM part.
- *
- *
- * Device Enumeration:
- *	In the dev_enumerate() phase,
- */
-
-void main(void)
-{
-	struct lb_memory *lb_mem;
-#if CONFIG_HAVE_ACPI_RESUME
-	void *wake_vec;
-#endif
-
-	u16 tmp;
-	tmp = inw(VX800_ACPI_IO_BASE + 0x04);
-	acpi_sleep_type = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0;
-
-	u8 y, x;
-	init_VIA_chipset();
-	printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-
-#if 0
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xa3, 0x80);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0x60, 0x20);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0xE5,
-			     pci_rawread_config8(PCI_RAWDEV(0, 3, 0),
-						 0x88));
-#endif
-
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x51, 0x40, 0x40);	//close CE-ATA (Consumer Electronics-ATA) and NFC
-
-	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x0, 0x40);//open USB Device Mode Enable
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x40, 0x40);	//close USB Device Mode
-
-	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x04, 0x04);//close USB 1.1 UHCI Port 4-5
-	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x02, 0x02);//close USB 2.0 ehci
-
-
-	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x00, 0x76);//open all usb and usb mode
-	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0x76);//close all usb
-
-	printk(BIOS_INFO, "=================SB 50h=%02x \n",
-		    pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x50));
-
-	/* FIXME: Is there a better way to handle this? */
-	init_timer();
-	printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-
-	/* Find the devices we don't have hard coded knowledge about. */
-	dev_enumerate();
-	printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-#if 0
-	x = y = 0;
-	printk(BIOS_INFO, "dump ehci3 \n");
-	for (; x < 16; x++) {
-		y = 0;
-		for (; y < 16; y++) {
-			printk(BIOS_INFO, "%02x ",
-				    pci_rawread_config8(PCI_RAWDEV
-							(0, 0x10, 4),
-							x * 16 + y));
-		}
-		printk(BIOS_INFO, "\n");
-	}
-#endif
-
-	post_code(0x66);
-	/* Now compute and assign the bus resources. */
-	dev_configure();
-	printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-#if 0
-	x = y = 0;
-	printk(BIOS_INFO, "dump ehci3 \n");
-	for (; x < 16; x++) {
-		y = 0;
-		for (; y < 16; y++) {
-			printk(BIOS_INFO, "%02x ",
-			   pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
-		}
-		printk(BIOS_INFO, "\n");
-	}
-#endif
-
-	post_code(0x88);
-	/* Now actually enable devices on the bus */
-	dev_enable();
-	printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-	/* And of course initialize devices on the bus */
-#if 0
-	x = y = 0;
-	printk(BIOS_INFO, "dump ehci3 \n");
-	for (; x < 16; x++) {
-		y = 0;
-		for (; y < 16; y++) {
-			printk(BIOS_INFO, "%02x ",
-			    pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
-		}
-		printk(BIOS_INFO, "\n");
-	}
-#endif
-
-	dev_initialize();
-	post_code(0x89);
-	printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-
-//          pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, 0x0571);
-
-#if 0
-	x = y = 0;
-	printk(BIOS_INFO, "dump ehci3 \n");
-	for (; x < 16; x++) {
-		y = 0;
-		for (; y < 16; y++) {
-			printk(BIOS_INFO, "%02x ",
-			    pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
-		}
-		printk(BIOS_INFO, "\n");
-	}
-#endif
-
-#if 0
-	y = pci_rawread_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d);
-	y &= 0x0f;
-	y |= 0x40;
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d, y);
-#endif
-
-#if 0
-	static const d0f0pcitable[5] = { 0xD0, 0, 0, 0, 0xFD };
-	static const d0f2pcitable[16 * 7 + 1] = {
-		0x88, 0xF8, 0xEF, 0x44, 0x7C, 0x24, 0x63, 0x01, 0x00, 0x09,
-		    0x00, 0x00, 0x10, 0xA2, 0x88, 0xCE,
-		0xFF, 0x0F, 0x00, 0xAA, 0x0A, 0x00, 0x00, 0x00, 0x01, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0xCC, 0x66, 0xAA, 0x55, 0x30, 0x38, 0x0C, 0x00, 0x00, 0x00,
-		    0x00, 0x22, 0x00, 0xAA, 0x00, 0x00,
-		0x44, 0x44, 0x55, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x0B, 0x00, 0x08, 0x00, 0x00, 0x00, 0x0A, 0x01, 0x41, 0x06,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x88, 0x56, 0x70, 0x77, 0x77, 0x07, 0x77, 0x77, 0x04,
-		    0x77, 0x77, 0x77, 0x77, 0x77, 0x77,
-		0x77, 0x77, 0x33, 0x33, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77,
-		    0x77, 0x77, 0x44, 0x44, 0x14, 0x00,
-		0x75
-	};
-
-	static const d0f4pcitable[16 * 6 + 3] = {
-		0x30, 0x00, 0x00,
-		0xFF, 0xFF, 0xCC, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x80, 0xE0, 0xD6, 0x80, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x01, 0x02, 0x03, 0x04, 0x04, 0x00, 0x00, 0x04, 0x04,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x12, 0x12, 0x00, 0x00, 0x08, 0xF4,
-		    0x01, 0x01, 0x79, 0x79, 0x0A, 0x00,
-	};
-	static const d0f5pcitable[16 * 10] = {
-		0x13, 0x0E, 0x00, 0x00, 0xD2, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x18, 0x9A, 0x00, 0x81, 0x28, 0xC0, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x40, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x26, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	};
-
-	static const d0f7pcitable[16 * 9] = {
-		0x00, 0x2A, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x29, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	};
-	static const d1f0pcitable[3] = {
-		0x01, 0x80, 0x40
-	};
-
-	static const dcf0pcitable[96] = {
-		0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x01, 0x00, 0xC2, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
-		    0x40, 0x01, 0x03, 0x01, 0x7E, 0x01,
-		0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF9,
-		    0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
-	};
-
-	static const d10f4pcitable[48] = {
-		0x00, 0x20, 0x43, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x9E, 0x68,
-		    0x00, 0x09, 0x13, 0x94, 0x03, 0x10,
-		0x80, 0x60, 0x11, 0xBF, 0x00, 0xFF, 0x0F, 0x00, 0x04, 0x0B,
-		    0xCC, 0xCC, 0x00, 0xCC, 0x00, 0x00,
-		0x20, 0x20, 0x01, 0x00, 0x05, 0x00, 0x00, 0x00, 0x01, 0x00,
-		    0x00, 0x00, 0x00, 0x20, 0x00, 0xC0,
-	};
-
-	static const d11f0pcitable[16 * 12] = {
-		0x44, 0x40, 0xF0, 0x0B, 0x00, 0x00, 0x00, 0x03, 0x00, 0x20,
-		    0x00, 0x00, 0x04, 0x00, 0x08, 0x00,
-		0xC1, 0x4D, 0x19, 0x80, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
-		    0x00, 0x51, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x80, 0x00,
-		    0xD0, 0xFE, 0x00, 0x00, 0x00, 0x00,
-		0x06, 0x11, 0x09, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
-		0x20, 0x84, 0x49, 0x00, 0x88, 0x00, 0x00, 0x00, 0x01, 0x08,
-		    0x1F, 0x00, 0x07, 0x1A, 0x00, 0x00,
-		0x00, 0x6E, 0xBC, 0x88, 0x28, 0xC1, 0x10, 0x80, 0x00, 0x80,
-		    0x20, 0x88, 0x00, 0x00, 0x00, 0xAD,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00,
-		    0x00, 0x00, 0x10, 0xD0, 0xFE, 0x90,
-		0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x01, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0xE7, 0x03, 0xA0, 0x60, 0x20, 0xC0, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x04, 0x00, 0x00, 0x00,
-	};
-
-	static const d11f7pcitable[192] = {
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x80, 0x43,
-		0x08, 0x80, 0x11, 0x11, 0x02, 0x0F, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x80, 0x00, 0x00, 0x20, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x80, 0x00, 0x00, 0x00, 0x00,
-		0x82, 0xC8, 0xEE, 0x01, 0x0C, 0x0F, 0xD0, 0x48, 0x00, 0x00,
-		    0x00, 0x00, 0x02, 0x00, 0x00, 0x00,
-		0x07, 0x00, 0x21, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x93, 0x08, 0x00, 0x5E, 0x00, 0x80, 0x29, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x48, 0x00, 0x00, 0x00,
-	};
-
-#define OPTION_1 1
-#define NOOPTION_1 1
-#ifdef OPTION_1
-	static const OPTION_1_d11f0pcitable[16 * 12] = {
-		0x44, 0x80, 0xf0, 0x0b, 0x00, 0x00, 0x00, 0x03, 0x00, 0x20,
-		    0x00, 0x00, 0x04, 0x01, 0x08, 0x00,
-		0xc0, 0x4d, 0x19, 0x80, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
-		    0x00, 0x53, 0x00, 0xfe, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x80, 0x00,
-		    0xd0, 0xfe, 0x00, 0x00, 0xdf, 0x00,
-		0x06, 0x11, 0x53, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x20, 0x84, 0x4a, 0x00, 0xda, 0x40, 0x00, 0x00, 0x01, 0x40,
-		    0x1f, 0x00, 0x07, 0x18, 0x00, 0x00,
-		0x00, 0x2e, 0xbc, 0x00, 0x28, 0xc1, 0x10, 0x80, 0x00, 0x80,
-		    0x08, 0x88, 0x00, 0x00, 0x00, 0xad,
-		0x06, 0x11, 0x53, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x40, 0x80, 0x40,
-		    0x00, 0x00, 0x00, 0xd3, 0xfe, 0x53,
-		0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x01, 0x41, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0xeb, 0x03, 0xa0, 0x60, 0x20, 0x80, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x04, 0x00, 0x00, 0x00,
-	};
-#endif
-
-	u8 i;
-/* error form ---- but add the chance to resume
-	for(i=0;i<5;i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i, d0f0pcitable[i+0xcb]);
-	}
-*/
-
-/* RO reg
-	for(i=0;i<5;i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i+0xcb, d0f0pcitable[i]);
-	}
-*/
-
-//boot ok, resume still err in linux
-#if 1
-	for (i = 0; i < 9; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
-				     d0f2pcitable[i]);
-	}
-	//9 is warm reset reg,   // boot err in coreboot
-	for (i = 10; i < 64; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
-				     d0f2pcitable[i]);
-	}
-	//0x90 look d0f2 appendixA1 ,   if set this to 09 or 0b, then some ddr2 will crash.
-	for (i = 65; i < 113; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
-				     d0f2pcitable[i]);
-	}
-#endif
-#ifdef OPTION_1
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x66, 0x09);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x70, 0xdd);
-	//  pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x90, 0x09);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x92, 0x40);
-
-#endif
-
-
-
-#if 1
-
-
-//d0f3
-/*		*/
-	//      pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x3b);  setting, my lspci is 0x29
-	//set bit4 cause the ide not be found
-//              pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x2b);
-	//set bit1 cause the ide not be found
-
-//              pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x29);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x95, 0x05);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x99, 0x12);
-
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xde, 0x00);
-#endif
-
-//boot ok,  resume err in coreboot
-#if 1
-	for (i = 0; i < 99; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), i + 0x8d,
-				     d0f4pcitable[i]);
-	}
-#endif
-
-#ifdef OPTION_1
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xe9, 0x90);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xec, 0x0);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xed, 0x0);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xee, 0x0);
-#endif
-
-
-#if 1
-//boot ok, resume still err in linux
-	for (i = 0; i < 160; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 5), i + 0x60,
-				     d0f5pcitable[i]);
-	}
-	for (i = 0; i < 144; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), i + 0x60,
-				     d0f7pcitable[i]);
-	}
-	for (i = 0; i < 3; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 1, 0), i + 0xb0,
-				     d1f0pcitable[i]);
-	}
-	for (i = 0; i < 96; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), i + 0x40,
-				     dcf0pcitable[i]);
-	}
-#endif
-
-#ifdef OPTION_1
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x61, 0x0);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x63, 0x0);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x76, 0xd0);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x88, 0x81);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x89, 0x01);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x8A, 0x60);
-#endif
-
-//d15f0
-
-#if 1
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 0), 0x4a, 0xa2);	// no affect.
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 1), 0x4a, 0xa2);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 2), 0x4a, 0xa2);
-
-//boot ok, resume still err in linux,  and if disable USB, then all ok
-//      for(i=0;i<48;i++){
-	for (i = 0; i < 44; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), i + 0x40,
-				     d10f4pcitable[i]);
-	}
-#endif
-
-//#ifdef NOOPTION_1
-#if 0
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6b, 0x01);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6d, 0x00);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6e, 0x08);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6f, 0x80);
-#endif
-
-#if 1
-//before (11.0)is add, s3 resume has already always dead in first resume(more frequenly), and sleep ok
-//      for(i=0;i<192;i++){
-	for (i = 0; i < 6; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-	//6 is uart and dvp vcp,   will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail
-
-	//7-18 is my familar part
-	for (i = 7; i < 18; i++) {	//sleep ok ,resume sleep err 2
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-
-	for (i = 18; i < 21; i++) {	//sleep ok ,   sleep err 1, resume
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-	//0x55 56 57 irq intA#B#C# linkA#linkB#linkC#
-	for (i = 24; i < 27; i++) {	//sleep ok , resume sleep err 1  resume  1
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-	//5b port 80h
-	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x5b, 0x0, 0x08);
-	//          i++;
-	//      pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i+0x40, d11f0pcitable[i]);
-
-	for (i = 28; i < 72; i++) {	//sleep ok , resume  sleep err 1 , resume 1ci
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-	//7273ACPI BASE
-
-	for (i = 74; i < 112; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-
-	//B0B4B5 dvp vcp,  if copy this ,then no uart, no gui(of unbuntu)
-	// pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, d11f0pcitable[112]);
-	i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0);
-	//multiplex with VCP
-	//    i = i | 0x30;
-	i = i & 0xf7;
-	pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i);
-
-
-
-	for (i = 113; i < 114; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-
-	for (i = 115; i < 116; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-
-
-	for (i = 118; i < 192; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-#endif
-#ifdef NOOPTION_1
-//      for(i=0;i<192;i++){
-	for (i = 0; i < 6; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     OPTION_1_d11f0pcitable[i]);
-	}
-	//6 is uart and dvp vcp,   will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail
-
-	//7-18 is my familar part
-	for (i = 7; i < 18; i++) {	//   sleep err 2
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     OPTION_1_d11f0pcitable[i]);
-	}
-
-	for (i = 18; i < 21; i++) {	//sleep ok , resume ???
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-	//0x55 56 57 irq intA#B#C# linkA#linkB#linkC#
-	for (i = 24; i < 27; i++) {	//sleep ok , resume ???
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     d11f0pcitable[i]);
-	}
-	//5b port 80h
-	i++;
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-			     OPTION_1_d11f0pcitable[i]);
-
-	for (i = 28; i < 72; i++) {	//sleep ok , resume???
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     OPTION_1_d11f0pcitable[i]);
-	}
-	//7273ACPI BASE
-
-	for (i = 74; i < 112; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     OPTION_1_d11f0pcitable[i]);
-	}
-
-	//B0B4B5 dvp vcp,  if copy this ,then no uart, no gui(of unbuntu)
-	// pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, OPTION_1_d11f0pcitable[112]);
-	i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0);
-	//multiplex with VCP
-	//    i = i | 0x30;
-	i = i & 0xf7;
-	pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i);
-
-
-
-	for (i = 113; i < 114; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     OPTION_1_d11f0pcitable[i]);
-	}
-
-	for (i = 115; i < 116; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     OPTION_1_d11f0pcitable[i]);
-	}
-
-	for (i = 118; i < 192; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
-				     OPTION_1_d11f0pcitable[i]);
-	}
-#endif
-
-#if 1
-	pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, PCI_DEVICE_ID_VIA_VX855_IDE);	//5324
-	pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBE,
-			      PCI_DEVICE_ID_VIA_VX855_IDE);
-	pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA0,
-			      PCI_VENDOR_ID_VIA);
-	pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA2, PCI_DEVICE_ID_VIA_VX855_LPC);	//8353
-	i = pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x79);
-	i &= ~0x40;
-	i |= 0x40;
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0x79, i);
-	pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0x72,
-			      PCI_DEVICE_ID_VIA_VX855_LPC);
-
-//boot ok, resume still err in linux
-	for (i = 0; i < 192; i++) {
-		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), i + 0x40,
-				     d11f7pcitable[i]);
-	}
-#endif
-#ifdef OPTION_1
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x61, 0x2a);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x63, 0xa0);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x64, 0xaa);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x84, 0x0);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x88, 0x02);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0xe6, 0x3f);
-#endif
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x20);
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x41, 0x31);
-
-#ifdef OPTION_1
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x00);
-#endif
-#endif
-
-	u8 i911;
-	//disable CHB L.L
-	//set VGA memory selection
-	i911 = pci_rawread_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0);
-	i911 &= 0xF8;
-	//ByteVal |= 0x03;
-	i911 |= 0x01;
-	pci_rawwrite_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0, i911);
-
-#if 1
-	struct device *dev;
-	printk(BIOS_INFO, "========= dump all  devices...\n");
-	for (dev = all_devices; dev; dev = dev->next) {
-		if (dev->path.type == DEVICE_PATH_PCI) {
-			printk(BIOS_DEBUG, "%s dump\n", dev_path(dev));
-			x = y = 0;
-			for (; x < 16; x++) {
-				y = 0;
-				for (; y < 16; y++) {
-					printk(BIOS_INFO, "%02x ",
-					    pci_read_config8(dev, x * 16 + y));
-				}
-				printk(BIOS_INFO, "\n");
-			}
-		}
-		printk(BIOS_INFO, "\n");
-	}
-#endif
-	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x04, 0x17, 0x17);//
-	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);///
-}
diff --git a/src/northbridge/via/vx800/examples/driving_clk_phase_data.c b/src/northbridge/via/vx800/examples/driving_clk_phase_data.c
deleted file mode 100644
index c62de6ed22..0000000000
--- a/src/northbridge/via/vx800/examples/driving_clk_phase_data.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
- #include "northbridge/via/vx800/driving_clk_phase_data.h"
-
-// DQS	Driving
-//Reg0xE0, 0xE1
-// According to #Bank to set DRAM DQS Driving
-//	                          #Bank	   1	 2     3     4	   5	 6     7     8
-static const u8 DDR2_DQSA_Driving_Table[4] = { 0xEE, 0xEE, 0xEE, 0xEE};
-static const u8 DDR2_DQSB_Driving_Table[2] = { 0xEE, 0xEE};
-
-// DQ Driving
-//Reg0xE2, 0xE3
-// For DDR2: According to bank  to set DRAM DQ Driving
-static const  u8 DDR2_DQA_Driving_Table[4] = {	0xAC, 0xAC, 0xAC, 0xAC };
-static const  u8 DDR2_DQB_Driving_Table[2] = { 0xCA, 0xCA };
-
-
-// CS	Driving
-//Reg0xE4, 0xE5
-// According to #Bank to set DRAM CS Driving
-// DDR1                       #Bank	     1	   2     3     4	 5	   6     7     8
-static const  u8 DDR2_CSA_Driving_Table_x8[4] = { 0x44, 0x44, 0x44, 0x44 };
-static const  u8 DDR2_CSB_Driving_Table_x8[2] = { 0x44, 0x44};
-static const  u8 DDR2_CSA_Driving_Table_x16[4]= { 0x44, 0x44, 0x44, 0x44};
-static const  u8 DDR2_CSB_Driving_Table_x16[2]= { 0x44, 0x44};
-// MAA	Driving
-//Reg0xE8, Reg0xE9
-static const  u8 DDR2_MAA_Driving_Table[MA_Table][5] =
-    {
-        //Chip number,	   400,   533,   667	  800   ;(SRAS,	SCAS, SWE)RxE8
-        {  6,	                0x86, 0x86, 0x86, 0x86},		// total MAA chips = 00 ~	06
-        { 18,	                0x86, 0x86, 0x86, 0x86},		// total MAA chips = 06 ~	18
-        {255,	                0xDB, 0xDB, 0xDB, 0xDB}		// total MAA chips = 18 ~
-    };
-
-static const  u8 DDR2_MAB_Driving_Table[MA_Table][2] =
-    {
-        //	Chip number,	Value	;(SRAS,	SCAS, SWE)RxE9
-        {  6,	0x86 },		// total MAB chips = 00 ~	06
-        { 18,	0x86 },		// total MAB chips = 06 ~	18
-        {255,	0xDB }		// total MAB chips = 18 ~
-    };
-
-// DCLK Driving
-//Reg0xE6, 0xE7
-// For DDR2: According to #Freq to set DRAM DCLK Driving
-//                        freq		  400M, 533M, 667M, 800M
-
-static const  u8 DDR2_DCLKA_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF };
-static const  u8 DDR2_DCLKB_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF };
-
-/*
-Duty cycle
-Duty cycle Control for DQ/DQS/DDRCKG in ChA & ChB
-D0F3RxEC/D0F3RxED/D0F3RxEE/D0F3RxEF
-According to DRAM frequency to control Duty Cycle
-*/
-static const  u8 ChA_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-        {0xEC,  0x00,  0x30,  0x30,  0x30,  0x30 },	// 1Rank
-        {0xEE,  0x0F,  0x40,  0x40,  0x00,  0x00 },
-        {0xEF,  0xCF,  0x00,  0x30,  0x30,  0x30}
-    };
-
-static const  u8 ChB_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-        {0xED,  0x00,  0x88,  0x88,  0x84,  0x88 },	// 1Rank
-        {0xEE,  0xF0,  0x00,  0x00,  0x00,  0x00 },
-        {0xEF,  0xFC,  0x00,  0x00,  0x00,  0x00 }
-    };
-
-
-/*
-DRAM Clock Phase Control for FeedBack Mode
-Modify NB Reg: Rx90[7]/Rx91/Rx92/Rx93/Rx94
-Processing:
-		1.Program VIA_NB3DRAM_REG90[7]=0b for FeedBack mode
-		2.Program clock	phase value with ChA/B DCLK enable, VIA_NB3DRAM_REG91[7:3]=00b
-		3.Check	ChB rank #, if 0, VIA_NB3DRAM_REG91[7]=1b, to disable ChB DCLKO
-		  ChA DCLKO can	not be disable,	so always program VIA_NB3DRAM_REG91[3]=0b
- */
-static const  u8 DDR2_ChA_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-        {0x91,  0xF8,  0x02,  0x01,  0x00,  0x07 },	// 1Rank
-        {0x92,  0xF8,  0x04,  0x03,  0x03,  0x02 },
-        {0x93,  0xF8,  0x06,  0x05,  0x04,  0x03 }
-    };
-
-static const  u8 DDR2_ChB_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value Value Value Value
-        {0x91, 0x0F, 0x20, 0x10, 0x00, 0x70 },	// 1Rank
-        {0x92, 0x0F, 0x40, 0x30, 0x30, 0x20 },
-        {0x93, 0x0F, 0x60, 0x50, 0x40, 0x30 }
-    };
-
-/*static const  u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] =
-    {
-        //     (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-       {0x91,  0xF8,  0x04,  0x03,  0x04,  0x01 },	// 1Rank
-        {0x92,  0xF8,  0x03,  0x06,  0x05,  0x04 },
-        {0x93,  0xF8,  0x03,  0x07,  0x06,  0x05 }
-    };*/
-
-static const  u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] =
-    {
-        //     (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-        {0x91,  0xF8,  0x02,  0x01,  0x00,  0x07},	// 1Rank
-        {0x92,  0xF8,  0x04,  0x03,  0x03,  0x02 },
-        {0x93,  0xF8,  0x06,  0x05,  0x04,  0x03 }
-    };
-
-/*
-DRAM Write Data phase control
-Modify NB Reg: Rx74/Rx75/Rx76
-*/
-/*static const  u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-        {0x74,  0xF8,  0x03,  0x04,  0x05,  0x02 },	// 1Rank
-        {0x75,  0xF8,  0x03,  0x04,  0x05,  0x02 },
-        {0x76,  0x00,  0x10,  0x80,  0x00,  0x07 }
-    };*/
-
-static const  u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-        {0x74,  0xF8,  0x01,  0x00,  0x00,  0x07 },	// 1Rank
-        {0x75,  0xF8,  0x01,  0x00,  0x00,  0x07 },
-        {0x76,  0x10,  0x80,  0x87,  0x07,  0x06 },
-        {0x8C,  0xFC,  0x03,  0x03,  0x03,  0x03 }
-    };
-
-/*static const  u8 DDR2_ChB_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value Value Value Value
-        {0x74, 0x8F, 0x30, 0x40, 0x30, 0x20 },	// 1Rank
-        {0x75, 0x8F, 0x30, 0x40, 0x30, 0x20 },
-        {0x8A, 0x00, 0x10, 0x80, 0x07, 0x07 }
-    };
-*/
-/*
-DQ/DQS Output Delay Control
-Modify NB D0F3: RxF0/RxF1/RxF2/RxF3
-*/
-static const  u8 DDR2_CHA_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] =
-    {
-        // RxF0	RxF1  RxF2	RxF3
-        { 0x00,	0x00, 0x00,	0x00 },// DDR400
-        { 0x00,	0x00, 0x00,	0x00 },// DDR533
-        { 0x00,	0x00, 0x00,	0x00 },// DDR667
-        { 0x00,	0x00, 0x00,	0x00 }// DDR800
-    };
-static const  u8 DDR2_CHB_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] =
-    {
-        // RxF4	RxF5  RxF6	RxF7
-        { 0x00,	0x00, 0x00,	0x00 },// DDR400
-        { 0x00,	0x00, 0x00,	0x00 },// DDR533
-        { 0x00,	0x00, 0x00,	0x00 },// DDR667
-        { 0x00,	0x00, 0x00,	0x00 }// DDR800
-    };
-
-/*
-DQ/DQS input Capture Control
-modify NB D0F3_Reg:Rx78/Rx79/Rx7A/Rx7B
-*/
-
-/*static const  u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-        {0x78,  0x00,  0x83,  0x8D,  0x87,  0x83 },	// 1Rank
-        {0x7A,  0xF0,  0x00,  0x00,  0x00,  0x00 },
-        {0x7B,  0x00,  0x10,  0x30,  0x20,  0x10 }
-    };*/
-
-
-static const  u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value  Value  Value  Value
-        {0x78,  0xC0,  0x0D,  0x07,  0x03,  0x01 },	// 1Rank
-        {0x7A,  0xF0,  0x00,  0x00,  0x00,  0x00 },
-        {0x7B,  0x00,  0x34,  0x34,  0x20,  0x10 }
-    };
-
-static const  u8 DDR2_ChB_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] =
-    {
-        //    (And NOT) DDR800 DDR667 DDR533 DDR400
-        //Reg  Mask  Value Value Value Value
-        {0x79, 0x00, 0x89, 0x89, 0x87, 0x83 },	// 1Rank
-        {0x7A, 0x0F, 0x00, 0x00, 0x00, 0x00 },
-        {0x8B, 0x00, 0x34, 0x34, 0x20, 0x10 }
-    };
-
-static const  u8 Fixed_DQSA_1_2_Rank_Table[4][2] =
-{
-// 	  Rx70	Rx71
-	{ 0x00,	0x05 },		// DDR800
-	{ 0x00,	0x06 },		// DDR667
-	{ 0x00,	0x04 },		// DDR533
-	{ 0x00,	0x05 }		// DDR400
-};
-static const  u8 Fixed_DQSA_3_4_Rank_Table[4][2] =
-{
-// 	  Rx70	Rx71
-	{0x00 ,	0x04},		// DDR800
-	{0x00 ,	0x04},		// DDR667
-	{0x00 ,	0x03},		// DDR533
-	{0x00 ,	0x04}		// DDR400
-};
diff --git a/src/northbridge/via/vx800/examples/romstage.c b/src/northbridge/via/vx800/examples/romstage.c
deleted file mode 100644
index c96511e2c9..0000000000
--- a/src/northbridge/via/vx800/examples/romstage.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include "console/console.c"
-#include "lib/ramtest.c"
-#include "northbridge/via/vx800/vx800.h"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "pc80/udelay_io.c"
-#include "lib/delay.c"
-#include "lib/memcpy.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "driving_clk_phase_data.c"
-#include "northbridge/via/vx800/raminit.h"
-#include "northbridge/via/vx800/raminit.c"
-
-static int acpi_is_wakeup_early_via_vx800(void)
-{
-	device_t dev;
-	u16 tmp, result;
-
-	print_debug("In acpi_is_wakeup_early_via_vx800\n");
-	/* Power management controller */
-	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
-				       PCI_DEVICE_ID_VIA_VX855_LPC), 0);
-
-	if (dev == PCI_DEV_INVALID)
-		die("Power management controller not found\n");
-
-	/* Set ACPI base address to I/O VX800_ACPI_IO_BASE. */
-	pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 0x1);
-
-	/* Enable ACPI access RTC signal gated with PSON. */
-	pci_write_config8(dev, 0x81, 0x84);
-
-	tmp = inw(VX800_ACPI_IO_BASE + 0x04);
-	result = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0;
-	print_debug("         boot_mode=");
-	print_debug_hex16(result);
-	print_debug("\n");
-	return result;
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-static void enable_mainboard_devices(void)
-{
-	device_t dev;
-	uint16_t values;
-
-	print_debug("In enable_mainboard_devices \n");
-
-	/* Enable P2P bridge Header for external PCI bus. */
-	dev = pci_locate_device(PCI_ID(0x1106, 0xa353), 0);
-	pci_write_config8(dev, 0x4f, 0x41);
-}
-
-static void enable_shadow_ram(void)
-{
-	uint8_t shadowreg;
-
-	pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0xff);
-	/* 0xf0000-0xfffff - ACPI tables */
-	shadowreg = pci_read_config8(PCI_DEV(0, 0, 3), 0x83);
-	shadowreg |= 0x30;
-	pci_write_config8(PCI_DEV(0, 0, 3), 0x83, shadowreg);
-	/* 0xe0000-0xeffff - elfload? */
-
-	pci_write_config8(PCI_DEV(0, 0, 3), 0x82, 0xff);
-}
-
-/*
-this table contains the value needed to be set before begin to init dram.
-Note: REV_Bx should be cared when porting a new board!!!!! */
-static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = {
-	//VT3409 no pcie
-	0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E,	// Set Exxxxxxx as pcie mmio config range
-	0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B,	// Support extended cfg address of pcie
-	//0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02, // APIC Interrupt((BT_INTR)) Control
-	// Set ROMSIP value by software
-
-	/*0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pullup Driving = 3
-	   0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pulldown Driving = 3
-	   0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pullup Driving = 3
-	   0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pulldown Driving = 3
-	   0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21, // Memory I/F timing ctrl
-	   0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1, // Memory I/F timing ctrl
-	   0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18, // AGTL+ I/O Circuit
-	   0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C, // AGTL+ Compensation Status
-	   0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33, // 2X AGTL+ Auto Compensation Offset
-	   0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33, // 4X AGTL+ Auto Compensation Offset
-	   0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72, // AGTL Compensation Status
-	   0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77, // AGTL Compensation Status
-	   0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44, // Input Host Address / Host Strobe Delay Control for HA Group
-	   0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22, // Input Host Address / Host Strobe Delay Control for HA Group
-	   0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00, // Output Delay Control of PAD for HA Group
-	   0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA, // Host Address / Address Clock Output Delay Control (Only for P4 Bus)
-	   0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
-	   0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
-	   0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
-	   0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
-	   0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44, // Host Data Receiving Strobe Delay Ctrl 1
-	   0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44, // Host Data Receiving Strobe Delay Ctrl 2
-	   0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00, // Output Delay of PAD for HDSTB
-	   0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00, // Output Delay of PAD for HD
-	   0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 0)
-	   0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 1)
-	   0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 2)
-	   0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 3) */
-
-
-	// CPU Host Bus Control
-	0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08,	// Request phase ctrl: Dynamic Defer Snoop Stall Count = 8
-	//0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW
-	0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C,	// CPU I/F Ctrl-1: Disable Fast DRDY and RAW
-	0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB,	// CPU I/F Ctrl-2: Enable all for performance
-	//0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK
-	0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44,	// Arbitration: Host/Master Occupancy timer = 4*4 HCLK
-	0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C,	// Misc Ctrl: Enable 8QW burst Mem Access
-	//0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06, // Miscellaneous Control 2
-	0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04,	// Miscellaneous Control 2
-	0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63,	// Write Policy 1
-	//0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL
-	//0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00, // CPU Miscellaneous Control 2
-	0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2,	// Write Policy
-	0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88,	// Bandwidth Timer
-	0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46,	// CPU Misc Ctrl
-	// 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B, // CPU Miscellaneous Control 3
-	//0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B, // CPU Miscellaneous Control 2
-	0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A,	// CPU Miscellaneous Control 2
-	0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41,	// CPU Miscellaneous Control 3
-	0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06,	// CPU Miscellaneous Control 4
-
-
-	// Set APIC and SMRAM
-	0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00,	// APIC Related Control
-	0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29,	// SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg
-	0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00	// End of the table
-};
-
-#define USE_VCP     1		//0 means use DVP
-#define USE_COM1    1
-#define USE_COM2    0
-
-#define gCom1Base   0x3f8
-#define gCom2Base   0x2f8
-
-void EmbedComInit(void)
-{
-	u8 ByteVal;
-	u16 ComBase;
-
-	//enable NB multiple function control
-	ByteVal = pci_read_config8(PCI_DEV(0, 0, 0), 0x4f);
-	ByteVal = ByteVal | 0x01;
-	pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, ByteVal);
-
-	//VGA Enable
-	ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA1);
-	ByteVal = ByteVal | 0x80;
-	pci_write_config8(PCI_DEV(0, 0, 3), 0xA1, ByteVal);
-
-	ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA7);
-	ByteVal = ByteVal | 0x08;
-	pci_write_config8(PCI_DEV(0, 0, 3), 0xA7, ByteVal);
-
-	//Enable p2p  IO/mem
-	ByteVal = pci_read_config8(PCI_DEV(0, 1, 0), 0x4);
-	ByteVal = ByteVal | 0x07;
-	pci_write_config8(PCI_DEV(0, 1, 0), 0x4, ByteVal);
-
-	//Turn on Graphic chip IO port port access
-	ByteVal = inb(0x3C3);
-	ByteVal = ByteVal | 0x01;
-	outb(ByteVal, 0x3C3);
-
-	//Turn off Graphic chip Register protection
-	outb(0x10, 0x3C4);
-	ByteVal = inb(0x3C5);
-	ByteVal = ByteVal | 0x01;
-	outb(ByteVal, 0x3C5);
-
-	//south module pad share enable 0x3C5.78[7]
-	outb(0x78, 0x3C4);
-	ByteVal = inb(0x3C5);
-	ByteVal = ByteVal | 0x80;
-	outb(ByteVal, 0x3C5);
-
-	//enable  UART Function multiplex with DVP or VCP pad D17F0Rx46[7,6]
-	ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0x46);
-	//multiplex with VCP
-	if (USE_VCP == 1)
-		ByteVal = (ByteVal & 0x3F) | 0x40;
-	//multiplex with DVP
-	else
-		ByteVal = (ByteVal & 0x3F) | 0xC0;
-	pci_write_config8(PCI_DEV(0, 17, 0), 0x46, ByteVal);
-
-	//enable embeded com1 and com2 D17F0RxB0[5,4]
-	ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xB0);
-	ByteVal = ByteVal & 0xcf;
-	//multiplex with VCP
-	if (USE_COM1 == 1)
-		ByteVal = ByteVal | 0x10;
-	if (USE_COM2 == 1)
-		ByteVal = ByteVal | 0x20;
-	pci_write_config8(PCI_DEV(0, 17, 0), 0xB0, ByteVal);
-
-	if (USE_COM1 == 1)
-		ComBase = gCom1Base;
-	else
-		ComBase = gCom2Base;
-
-//noharddrive
-
-	//set embeded com1 IO base = 0x3E8
-	//D17F0RB4
-	//ByteVal = 0xFD;
-	if (USE_COM1 == 1) {
-		ByteVal = (u8) ((gCom1Base >> 3) | 0x80);
-		pci_write_config8(PCI_DEV(0, 17, 0), 0xB4, ByteVal);
-		ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2);
-		ByteVal = (ByteVal & 0xf0) | 0x04;
-		pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal);
-	}
-	//set embeded com2 IO base = 0x2E8
-	//D17F0RB5
-	//ByteVal = 0xDD;
-	if (USE_COM2 == 1) {
-		ByteVal = (u8) ((gCom2Base >> 3) | 0x80);
-		pci_write_config8(PCI_DEV(0, 17, 0), 0xB5, ByteVal);
-		ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2);
-		ByteVal = (ByteVal & 0x0f) | 0x30;
-		pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal);
-	}
-	//no port 80 biger then 0x10
-
-	//disable interrupt
-	ByteVal = inb(ComBase + 3);
-	outb(ByteVal & 0x7F, ComBase + 3);
-	outb(0x00, ComBase + 1);
-
-	//set baudrate
-	ByteVal = inb(ComBase + 3);
-	outb(ByteVal | 0x80, ComBase + 3);
-	outb(0x01, ComBase);
-	outb(0x00, ComBase + 1);
-
-	//set  frame  fromat
-	ByteVal = inb(ComBase + 3);
-	outb(ByteVal & 0x3F, ComBase + 3);
-	outb(0x03, ComBase + 3);
-	outb(0x00, ComBase + 2);
-	outb(0x00, ComBase + 4);
-
-	//SOutput("Embeded com output\n");
-	//while(1);
-}
-
-void main(unsigned long bist)
-{
-	unsigned cpu_reset = 0;
-	u16 boot_mode;
-	u8 rambits;
-
-	//device_t dev;
-	/* Enable multifunction for northbridge. */
-	pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, 0x01);
-	EmbedComInit();
-	//enable_vx800_serial();
-	//uart_init();
-
-/*	1.    D15F0
-
-a)      RxBAh = 71h
-
-b)      RxBBh = 05h
-
-c)      RxBEh = 71h
-
-d)      RxBFh = 05h
-
-2.    D17F0
-
-a)      RxA0h = 06h
-
-b)      RxA1h = 11h
-
-c)      RxA2h = 27h
-
-d)      RxA3h = 32h
-
-e)      Rx79h = 40h
-
-f)      Rx72h = 27h
-
-g)      Rx73h = 32h
-*/
-
-	u8 Data8;
-
-	pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBA,
-			   PCI_DEVICE_ID_VIA_VX855_IDE);
-	pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBE,
-			   PCI_DEVICE_ID_VIA_VX855_IDE);
-	pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA0, PCI_VENDOR_ID_VIA);
-	pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA2,
-			   PCI_DEVICE_ID_VIA_VX855_LPC);
-	Data8 = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x79);
-	Data8 &= ~0x40;
-	Data8 |= 0x40;
-	pci_write_config8(PCI_DEV(0, 0x11, 0), 0x79, Data8);
-	pci_write_config16(PCI_DEV(0, 0x11, 0), 0x72,
-			   PCI_DEVICE_ID_VIA_VX855_LPC);
-
-	console_init();		//there are to function defination of console_init(), while the src/archi386/lib is the right one
-
-	/* decide if this is a s3 wakeup or a normal boot */
-	boot_mode = acpi_is_wakeup_early_via_vx800();
-	/*add this, to transfer "cpu restart" to "cold boot"
-	   When this boot is not a S3 resume, and PCI registers had been written,
-	   then this must be a cpu restart(result of os reboot cmd). so we need a real "cold boot". */
-	if ((boot_mode != 3)
-	    && (pci_read_config8(PCI_DEV(0, 0, 3), 0x80) != 0)) {
-		outb(6, 0xcf9);
-	}
-
-	/*x86 cold boot I/O cmd */
-	enable_smbus();
-	//smbus_fixup(&ctrl);// this fix does help vx800!, but vx855 no need this
-
-	if (bist == 0) {
-		// CAR need mtrr untill mem is ok, so i disable this early_mtrr_init();
-		//print_debug("doing early_mtrr\n");
-		//early_mtrr_init();
-	}
-
-	/* Halt if there was a built-in self test failure. */
-	report_bist_failure(bist);
-
-	print_debug("Enabling mainboard devices\n");
-	enable_mainboard_devices();
-
-	u8 Data;
-	device_t device;
-	/* Get NB Chip revision from D0F4RxF6, revision will be used in via_pci_inittable */
-	device = PCI_DEV(0, 0, 4);
-	Data = pci_read_config8(device, 0xf6);
-	print_debug("NB chip revision =");
-	print_debug_hex8(Data);
-	print_debug("\n");
-	/* make NB ready before draminit */
-	via_pci_inittable(Data, mNbStage1InitTbl);
-
-	/*add this.
-	   When resume from s3, draminit is skiped, so need to recovery any PCI register related to draminit.
-	   and d0f3 didnt lost its Power during whole s3 time, so any register not belongs to d0f3 need to be recoveried . */
-#if 1
-	if (boot_mode == 3) {
-		u8 i;
-		u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 };
-		DRAM_SYS_ATTR DramAttr;
-
-		print_debug("This is a S3 wakeup\n");
-
-		memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR));
-		/*Step1 DRAM Detection; DDR1 or DDR2; Get SPD Data; Rank Presence;64 or 128bit; Unbuffered or registered; 1T or 2T */
-		DRAMDetect(&DramAttr);
-
-		/*begin to get ram size, 43,42 41 40 contains the end address of last rank in ddr2-slot */
-		device = PCI_DEV(0, 0, 3);
-		for (rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) {
-			rambits = pci_read_config8(device, ramregs[i]);
-			if (rambits != 0)
-				break;
-		}
-
-		DRAMDRDYSetting(&DramAttr);
-
-		Data = 0x80;	// this value is same with dev_init.c
-		pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data);
-		pci_write_config8(PCI_DEV(0, 17, 7), 0x60, rambits << 2);
-		Data = pci_read_config8(MEMCTRL, 0x88);
-		pci_write_config8(PCI_DEV(0, 17, 7), 0xE5, Data);
-
-		DRAMRegFinalValue(&DramAttr);	// I just copy this function from draminit to here!
-		SetUMARam();	// I just copy this function from draminit to here!
-		print_debug("Resume from S3, RAM init was ignored\n");
-	} else {
-		ddr2_ram_setup();
-		ram_check(0, 640 * 1024);
-	}
-#endif
-	//ddr2_ram_setup();
-	/*this line is the same with cx700 port . */
-	enable_shadow_ram();
-
-	/*
-	   For coreboot most time of S3 resume is the same as normal boot, so some memory area under 1M become dirty,
-	   so before this happen, I need to backup the content of mem to top-mem.
-	   I will reserve the 1M top-men in LBIO table in coreboot_table.c and recovery the content of 1M-mem in wakeup.c
-	 */
-#if PAYLOAD_IS_SEABIOS==1	//
-	if (boot_mode == 3) {
-		/*   some idea of Libo.Feng at amd.com in  http://www.coreboot.org/pipermail/coreboot/2008-December/043111.html
-		   I want move the 1M data, I have to set some MTRRs myself. */
-		/* setting mtrr before back memory save s3 resume time about 0.14 seconds */
-		/*because CAR stack use cache, and here to use cache , must be careful,
-		   1 during these mtrr code, must no function call, (after this mtrr, I think it should be ok to use function)
-		   2 before stack switch, no use variable that have value set before this
-		   3 due to 2, take care of "cpu_reset", I directlly set it to ZERO.
-		 */
-		u32 memtop = *(u32 *) WAKE_MEM_INFO;
-		u32 memtop1 = *(u32 *) WAKE_MEM_INFO - 0x100000;
-		u32 memtop2 = *(u32 *) WAKE_MEM_INFO - 0x200000;
-		u32 memtop3 =
-		    *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000;
-		u32 memtop4 =
-		    *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000 +
-		    0xe0000;
-		/*      __asm__ volatile (
-		   "movl    $0x204, %%ecx\n\t"
-		   "xorl    %%edx, %%edx\n\t"
-		   "movl     %0,%%eax\n\t"
-		   "orl     $(0 | 6), %%eax\n\t"
-		   "wrmsr\n\t"
-
-		   "movl    $0x205, %%ecx\n\t"
-		   "xorl    %%edx, %%edx\n\t"
-		   "movl   $0x100000,%%eax\n\t"
-		   "decl                %%eax\n\t"
-		   "notl                %%eax\n\t"
-		   "orl    $(0 | 0x800), %%eax\n\t"
-		   "wrmsr\n\t"
-		   ::"g"(memtop2)
-		   );
-		   __asm__ volatile (
-		   "movl    $0x206, %%ecx\n\t"
-		   "xorl    %%edx, %%edx\n\t"
-		   "movl     %0,%%eax\n\t"
-		   "orl     $(0 | 6), %%eax\n\t"
-		   "wrmsr\n\t"
-
-		   "movl    $0x207, %%ecx\n\t"
-		   "xorl    %%edx, %%edx\n\t"
-		   "movl   $0x100000,%%eax\n\t"
-		   "decl                %%eax\n\t"
-		   "notl                %%eax\n\t"
-		   "orl    $(0 | 0x800), %%eax\n\t"
-		   "wrmsr\n\t"
-		   ::"g"(memtop1)
-		   );
-		   __asm__ volatile (
-		   "movl    $0x208, %ecx\n\t"
-		   "xorl    %edx, %edx\n\t"
-		   "movl    $0,%eax\n\t"
-		   "orl     $(0 | 6), %eax\n\t"
-		   "wrmsr\n\t"
-
-		   "movl    $0x209, %ecx\n\t"
-		   "xorl    %edx, %edx\n\t"
-		   "movl     $0x100000,%eax\n\t"
-		   "decl                %eax\n\t"
-		   "notl                %eax\n\t"
-		   "orl     $(0 | 0x800), %eax\n\t"
-		   "wrmsr\n\t"
-		   );
-		 */
-		// WAKE_MEM_INFO is  inited in get_set_top_available_mem in tables.c
-		// these two memcpy not not be enabled if set the MTRR around this two lines.
-		/*__asm__ volatile (
-	 			"movl    $0, %%esi\n\t"
-        "movl    %0, %%edi\n\t"
-       	"movl    $0xa0000, %%ecx\n\t"
-       	"shrl    $2, %%ecx\n\t"
-        "rep movsd\n\t"
-        ::"g"(memtop3)
-   	);
-	__asm__ volatile (
-	 			"movl    $0xe0000, %%esi\n\t"
-        "movl    %0, %%edi\n\t"
-       	"movl    $0x20000, %%ecx\n\t"
-       	"shrl    $2, %%ecx\n\t"
-        "rep movsd\n\t"
-        ::"g"(memtop4)
-   	);*/
-		print_debug("copy memory to high memory to protect s3 wakeup vector code \n");	//this can have function call, because no variable used before this
-		memcpy((unsigned char *) ((*(u32 *) WAKE_MEM_INFO) -
-					  64 * 1024 - 0x100000),
-		       (unsigned char *) 0, 0xa0000);
-		memcpy((unsigned char *) ((*(u32 *) WAKE_MEM_INFO) -
-					  64 * 1024 - 0x100000 + 0xe0000),
-		       (unsigned char *) 0xe0000, 0x20000);
-
-		/* restore the MTRR previously modified. */
-/*		__asm__ volatile (
-        "wbinvd\n\t"
-        "xorl    %edx, %edx\n\t"
-       	"xorl    %eax, %eax\n\t"
-       	"movl    $0x204, %ecx\n\t"
-        "wrmsr\n\t"
-	 			"movl    $0x205, %ecx\n\t"
-        "wrmsr\n\t"
-	 			"movl    $0x206, %ecx\n\t"
-        "wrmsr\n\t"
-	 			"movl    $0x207, %ecx\n\t"
-        "wrmsr\n\t"
-	 			"movl    $0x208, %ecx\n\t"
-        "wrmsr\n\t"
-	 			"movl    $0x209, %ecx\n\t"
-        "wrmsr\n\t"
-		);*/
-	}
-#endif
-}