diff --git a/src/mainboard/google/zoombini/Kconfig b/src/mainboard/google/zoombini/Kconfig
index 64180f3cc1..31b8cc9416 100644
--- a/src/mainboard/google/zoombini/Kconfig
+++ b/src/mainboard/google/zoombini/Kconfig
@@ -3,6 +3,7 @@ config BOARD_GOOGLE_BASEBOARD_ZOOMBINI
 	def_bool n
 	select BOARD_ROMSIZE_KB_16384
 	select DRIVERS_I2C_GENERIC
+	select DRIVERS_I2C_HID
 	select DRIVERS_SPI_ACPI
 	select EC_GOOGLE_CHROMEEC
 	select EC_GOOGLE_CHROMEEC_LPC
diff --git a/src/mainboard/google/zoombini/variants/meowth/devicetree.cb b/src/mainboard/google/zoombini/variants/meowth/devicetree.cb
index 88de8789ce..80bb1379ea 100644
--- a/src/mainboard/google/zoombini/variants/meowth/devicetree.cb
+++ b/src/mainboard/google/zoombini/variants/meowth/devicetree.cb
@@ -53,6 +53,13 @@ chip soc/intel/cannonlake
 	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)"
 	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)"
 
+	# Touchscreen Digitizer
+	register "i2c[0]" = "{
+		.speed = I2C_SPEED_FAST_PLUS,
+		.rise_time_ns = 98,
+		.fall_time_ns = 38,
+	}"
+
 	device domain 0 on
 		device pci 00.0 on  end # Host Bridge
 		device pci 02.0 on  end # Integrated Graphics Device
@@ -63,7 +70,16 @@ chip soc/intel/cannonlake
 		device pci 14.0 on  end # USB xHCI
 		device pci 14.1 off end # USB xDCI (OTG)
 		device pci 14.5 off end # SDCard
-		device pci 15.0 on  end # I2C #0
+		device pci 15.0 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""WCOM50C1""
+				register "generic.desc" = ""WCOM Digitizer""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C14_IRQ)"
+				register "generic.speed" = "I2C_SPEED_FAST_PLUS"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0a on end
+			end
+		end # I2C #0
 		device pci 15.1 on  end # I2C #1
 		device pci 15.2 on  end # I2C #2
 		device pci 15.3 on  end # I2C #3
diff --git a/src/mainboard/google/zoombini/variants/meowth/gpio.c b/src/mainboard/google/zoombini/variants/meowth/gpio.c
index 19c028ed0e..21c4bbce50 100644
--- a/src/mainboard/google/zoombini/variants/meowth/gpio.c
+++ b/src/mainboard/google/zoombini/variants/meowth/gpio.c
@@ -94,13 +94,13 @@ static const struct pad_config gpio_table[] = {
 				   NF1), /* UART_PCH_RX_DEBUG_TX */
 /* UART0_TXD */		PAD_CFG_NF(GPP_C9, NONE, DEEP,
 				   NF1), /* UART_PCH_TX_DEBUG_RX */
-/* UART0_RTS# */	PAD_CFG_GPO(GPP_C10, 0, DEEP), /* PP3300_TOUCH_EN */
+/* UART0_RTS# */	PAD_CFG_GPO(GPP_C10, 1, DEEP), /* PP3300_TOUCH_EN */
 /* UART0_CTS# */	PAD_NC(GPP_C11, NONE),
 /* Only P0 boards need an internal pullup */
 /* UART1_RXD */         PAD_CFG_GPI_APIC(GPP_C12, UP_20K, DEEP, EDGE_SINGLE,
 					 INVERT), /* H1_PCH_INT_ODL */
 /* UART1_TXD */		PAD_NC(GPP_C13, NONE),
-/* UART1_RTS# */	PAD_CFG_GPI_SCI(GPP_C14, NONE, DEEP, EDGE_SINGLE,
+/* UART1_RTS# */	PAD_CFG_GPI_APIC(GPP_C14, NONE, DEEP, LEVEL,
 					NONE), /* TOUCHSCREEN_INT_ODL */
 /* UART1_CTS# */	PAD_NC(GPP_C15, NONE),
 /* I2C0_SDA */		PAD_CFG_NF(GPP_C16, NONE, DEEP,