Use stopwatch_wait_until_expired where applicable

Change-Id: I4d6c6810b91294a7e401a4a1a446218c04c98e55
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
This commit is contained in:
Jonathan Neuschäfer 2017-09-19 15:19:54 +02:00 committed by Martin Roth
parent 109ba284a1
commit c966075f46
5 changed files with 7 additions and 11 deletions

View File

@ -149,8 +149,7 @@ static void rx6110sa_init(struct device *dev)
* Take the needed delay after a reset sequence into account before the
* VLF-bit can be cleared.
*/
while (!stopwatch_expired(&sw))
;
stopwatch_wait_until_expired(&sw);
flags &= ~VLF_BIT;
rx6110sa_write(dev, FLAG_REGISTER, flags);

View File

@ -51,8 +51,9 @@ static int crosec_spi_io(size_t req_size, size_t resp_size, void *context)
struct spi_slave *slave = (struct spi_slave *)context;
int ret = 0;
while (!stopwatch_expired(&cs_cooldown_sw))
/* Wait minimum delay between CS assertions. */;
/* Wait minimum delay between CS assertions. */
stopwatch_wait_until_expired(&cs_cooldown_sw);
spi_claim_bus(slave);
/* Allow EC to ramp up clock after being awaken.

View File

@ -34,7 +34,5 @@ void udelay(unsigned int usec)
return;
stopwatch_init_usecs_expire(&sw, usec);
while (!stopwatch_expired(&sw))
;
stopwatch_wait_until_expired(&sw);
}

View File

@ -55,8 +55,7 @@ void main(void)
/* init memory */
mt_mem_init(get_sdram_config());
while (!stopwatch_expired(&sw))
;
stopwatch_wait_until_expired(&sw);
/* Set to maximum frequency */
if (board_id() + CONFIG_BOARD_ID_ADJUSTMENT < 5)

View File

@ -165,8 +165,7 @@ static void wait_for_legacy_dev(void *unused)
stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000);
printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...",
legacy_delay - us_since_boot, legacy_delay);
while (!stopwatch_expired(&sw))
;
stopwatch_wait_until_expired(&sw);
printk(BIOS_NOTICE, "done!\n");
}