GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

fix some typos, clarify comments and drop dead code (trivial) 

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Stefan Reinauer 2007-05-21 18:38:29 +00:00 committed by Stefan Reinauer
parent ecad5df6b7
commit ca7b4f5c49
2 changed files with 16 additions and 46 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

60
src/northbridge/amd/amdk8/raminit.c
View File

@ -614,10 +614,10 @@ static int is_dual_channel(const struct mem_controller *ctrl)
static int is_opteron(const struct mem_controller *ctrl)
{
/* Test to see if I am an Opteron.
* FIXME Testing dual channel capability is correct for now
* but a beter test is probably required.
* FIXME Socket 939 based Athlon64 have dual channel capability,
* too, so we need a better test for Opterons
*/
#warning "FIXME implement a better test for opterons"
#warning "FIXME: Implement a better test for Opterons"
uint32_t nbcap;
nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
return !!(nbcap & NBCAP_128Bit);
@ -1202,7 +1202,7 @@ static long spd_handle_unbuffered_dimms(const struct mem_controller *ctrl, long
die("Mixed buffered and registered dimms not supported");
}
#if 1
//By yhlu for debug Athlon64 939 can do dual channel, but it use unbuffer DIMM
// yhlu debug: Athlon64 939 can do dual channel, but it uses unbuffered DIMMs
if (unbuffered && is_opteron(ctrl)) {
die("Unbuffered Dimms not supported on Opteron");
}
@ -2264,7 +2264,10 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
#if HW_MEM_HOLE_SIZE_AUTO_INC == 1
//We need to double check if the hole_startk is valid, if it is equal to basek, we need to decrease it some
/* We need to double check if hole_startk is valid.
* If it is equal to the dram base address in K (base_k),
* we need to decrease it.
*/
uint32_t basek_pri;
for(i=0; i<controllers; i++) {
uint32_t base;
@ -2275,14 +2278,17 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
}
base_k = (base & 0xffff0000) >> 2;
if(base_k == hole_startk) {
hole_startk -= (base_k - basek_pri)>>1; // decrease mem hole startk to make sure it is on middle of privous node
break; //only one hole
/* decrease memory hole startk to make sure it is
* in the middle of the previous node
*/
hole_startk -= (base_k - basek_pri)>>1;
break; /* only one hole */
}
basek_pri = base_k;
}
#endif
//find node index that need do set hole
/* Find node number that needs the memory hole configured */
for(i=0; i<controllers; i++) {
uint32_t base, limit;
unsigned base_k, limit_k;
@ -2298,7 +2304,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
hoist_memory(controllers, ctrl, hole_startk, i);
end_k = memory_end_k(ctrl, controllers);
set_top_mem(end_k, hole_startk);
break; //only one hole
break; /* only one hole */
}
}
@ -2343,14 +2349,6 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
memreset(controllers, ctrl);
/* We need to wait a mimmium of 20 MEMCLKS to enable the InitDram */
#if 0
print_debug("prepare to InitDram:");
for(i=0; i<100; i++) {
print_debug_hex32(i);
print_debug("\b\b\b\b\b\b\b\b");
}
print_debug("\r\n");
#endif
for(i = 0; i < controllers; i++) {
uint32_t dcl, dch;
@ -2454,34 +2452,6 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
#endif
}
static int mem_inited(int controllers, const struct mem_controller *ctrl)
{
int i;
unsigned mask = 0;
unsigned mask_inited = 0;
for(i = 0; i < controllers; i++) {
uint32_t dcl;
if (!controller_present(ctrl + i))
continue;
mask |= (1<<i);
dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
if (!is_cpu_pre_c0()) { // B3
if( (dcl & DCL_MemClrStatus) && (dcl & DCL_DramEnable) ) {
mask_inited |= (1<<i);
}
}
}
if(mask == mask_inited) return 1;
return 0;
}
#if USE_DCACHE_RAM == 1
static void set_sysinfo_in_ram(unsigned val)
{

2
src/northbridge/amd/amdk8/raminit_f.c
View File

@ -670,7 +670,7 @@ static int is_opteron(const struct mem_controller *ctrl)
{
/* Test to see if I am an Opteron.
* FIXME Testing dual channel capability is correct for now
* but a beter test is probably required.
* but a better test is probably required.
* m2 and s1g1 support dual channel too. but only support unbuffered dimm
*/
#warning "FIXME implement a better test for opterons"