soc/cavium: Remove white spaces before tabs

Change-Id: I8213835ac18a31f1c10d80ba07b50d33f8abcbd9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/30620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>

src/soc/cavium/cn81xx/gpio.c

@@ -37,9 +37,9 @@ union bit_cfg {
 		u64 filt_cnt	: 4; /* Glitch filter counter */
 		u64 filt_sel	: 4; /* Glitch filter select */
 		u64 tx_od	: 1; /* Set Output to Open Drain */
-		u64 		: 3;
+		u64		: 3;
 		u64 pin_sel	: 10; /* Select type of pin */
-		u64 		: 38;
+		u64		: 38;
 	} s;
 };
 

src/soc/cavium/cn81xx/include/soc/addressmap.h

@@ -36,7 +36,7 @@
 
 /* LMC */
 #define LMC0_PF_BAR0		0x87E088000000ULL
-#define LMC0_DDR_PLL_CTL0 	0x258
+#define LMC0_DDR_PLL_CTL0	0x258
 
 /* OCLA */
 

src/soc/cavium/cn81xx/spi.c

@@ -44,7 +44,7 @@ union cavium_spi_cfg {
 		u64 cslate	: 1;
 		u64 csena	: 4; /* Must be one */
 		u64 clkdiv	: 13;
-		u64 		: 35;
+		u64		: 35;
 	} s;
 };
 
@@ -69,7 +69,7 @@ union cavium_spi_tx {
 		u64 leavecs	: 1;
 		u64		: 3;
 		u64 csid	: 2;
-		u64 		: 42;
+		u64		: 42;
 	} s;
 };
 

src/soc/cavium/cn81xx/uart.c

@@ -34,13 +34,13 @@ union cn81xx_uart_ctl {
 		u64 uaa_rst		: 1;
 		u64			: 2;
 		u64 csclk_en		: 1;
-		u64 			: 19;
+		u64			: 19;
 		u64 h_clkdiv_sel	: 3;
-		u64 			: 1;
+		u64			: 1;
 		u64 h_clkdiv_rst	: 1;
 		u64 h_clk_byp_sel	: 1;
 		u64 h_clk_en		: 1;
-		u64 			: 33;
+		u64			: 33;
 	} s;
 };
 

src/soc/cavium/common/bdk-coreboot.c

@@ -39,10 +39,10 @@
  * @param twsi_id   which TWSI bus to use
  * @param dev_addr  Device address (7 bit)
  * @param internal_addr
- *      	    Internal address.  Can be 0, 1 or 2 bytes in width
+ *		    Internal address.  Can be 0, 1 or 2 bytes in width
  * @param num_bytes Number of data bytes to read (1-4)
  * @param ia_width_bytes
- *      	    Internal address size in bytes (0, 1, or 2)
+ *		    Internal address size in bytes (0, 1, or 2)
  *
  * @return Read data, or -1 on failure
  */
@@ -77,14 +77,14 @@ int64_t bdk_twsix_read_ia(bdk_node_t node, int twsi_id, uint8_t dev_addr,
  * @param twsi_id   which TWSI interface to use
  * @param dev_addr  TWSI device address (7 bit only)
  * @param internal_addr
- *      	    TWSI internal address (0, 8, or 16 bits)
+ *		    TWSI internal address (0, 8, or 16 bits)
  * @param num_bytes Number of bytes to write (1-8)
  * @param ia_width_bytes
- *      	    internal address width, in bytes (0, 1, 2)
+ *		    internal address width, in bytes (0, 1, 2)
- * @param data      Data to write.  Data is written MSB first on the twsi bus, and
+ * @param data      Data to write.  Data is written MSB first on the twsi bus,
- *      	    only the lower num_bytes bytes of the argument are valid.  (If
+ *		    and only the lower num_bytes bytes of the argument are
- *      	    a 2 byte write is done, only the low 2 bytes of the argument is
+ *		    valid.  If a 2 byte write is done, only the low 2 bytes of
- *      	    used.
+ *		    the argument is used.
  *
  * @return Zero on success, -1 on error
  */