delete white trailing spaces. It is done by the perl command.

sh> perl -pi -e 's/[[:blank:]]+$//' $files
Trivial.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by:  Zheng Bao <zheng.bao@amd.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Zheng Bao 2009-10-14 02:56:00 +00:00 committed by Zheng Bao
parent b0575d8e1f
commit cb69cb3e69
2 changed files with 14 additions and 14 deletions

View File

@ -42,8 +42,8 @@ static int set_bits(u8 * port, u32 mask, u32 val)
dword |= val; dword |= val;
writel(dword, port); writel(dword, port);
/* Wait for readback of register to /* Wait for readback of register to
* match what was just written to it * match what was just written to it
*/ */
count = 50; count = 50;
do { do {
@ -64,11 +64,11 @@ static u32 codec_detect(u8 * base)
u32 dword; u32 dword;
/* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */ /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
if (set_bits(base + 0x08, 1, 0) == -1) if (set_bits(base + 0x08, 1, 0) == -1)
goto no_codec; goto no_codec;
/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
if (set_bits(base + 0x08, 1, 1) == -1) if (set_bits(base + 0x08, 1, 1) == -1)
goto no_codec; goto no_codec;
/* Delay for 1 ms since the BKDG does */ /* Delay for 1 ms since the BKDG does */
@ -79,7 +79,7 @@ static u32 codec_detect(u8 * base)
dword &= 0x0F; dword &= 0x0F;
if (!dword) if (!dword)
goto no_codec; goto no_codec;
return dword; return dword;
no_codec: no_codec:
@ -271,10 +271,10 @@ static void hda_init(struct device *dev)
struct resource *res; struct resource *res;
u32 codec_mask; u32 codec_mask;
device_t sm_dev; device_t sm_dev;
/* Enable azalia - PM_io 0x59[4], disable ac97 - PM_io 0x59[1..0] */ /* Enable azalia - PM_io 0x59[4], disable ac97 - PM_io 0x59[1..0] */
pm_iowrite(0x59, 0xB); pm_iowrite(0x59, 0xB);
/* Find the SMBus */ /* Find the SMBus */
/* FIXME: Need to find out why the call below crashes. */ /* FIXME: Need to find out why the call below crashes. */
/*sm_dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_ATI_SB600_SM, 0);*/ /*sm_dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_ATI_SB600_SM, 0);*/
@ -294,8 +294,8 @@ static void hda_init(struct device *dev)
pci_write_config32(dev, 0x2c, dword); pci_write_config32(dev, 0x2c, dword);
/* Read in BAR */ /* Read in BAR */
/* Is this right? HDA allows for a 64-bit BAR /* Is this right? HDA allows for a 64-bit BAR
* but this is only setup for a 32-bit one * but this is only setup for a 32-bit one
*/ */
res = find_resource(dev, 0x10); res = find_resource(dev, 0x10);
if (!res) if (!res)

View File

@ -185,14 +185,14 @@ static void sata_init(struct device *dev)
byte = readb(sata_bar5 + 0x12C + 0x80 * i); byte = readb(sata_bar5 + 0x12C + 0x80 * i);
/* Set Reset Bit and 1.5g bit */ /* Set Reset Bit and 1.5g bit */
byte |= 0x11; byte |= 0x11;
writeb(byte, (sata_bar5 + 0x12C + 0x80 * i)); writeb(byte, (sata_bar5 + 0x12C + 0x80 * i));
/* Wait 1ms */ /* Wait 1ms */
mdelay(1); mdelay(1);
/* Clear Reset Bit */ /* Clear Reset Bit */
byte &= ~0x01; byte &= ~0x01;
writeb(byte, (sata_bar5 + 0x12C + 0x80 * i)); writeb(byte, (sata_bar5 + 0x12C + 0x80 * i));
/* Wait 1ms */ /* Wait 1ms */