Add support for the ASUS MEW-AM board.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2980 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann 2007-11-24 22:09:38 +00:00
parent 4dea67193e
commit cc454483b4
7 changed files with 464 additions and 0 deletions

View File

@ -0,0 +1,144 @@
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
if USE_FALLBACK_IMAGE
default ROM_SECTION_SIZE = FALLBACK_SIZE
default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE)
else
default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
default ROM_SECTION_OFFSET = 0
end
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE
+ ROM_SECTION_OFFSET + 1)
default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
default XIP_ROM_SIZE = 64 * 1024
default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
arch i386 end
driver mainboard.o
if HAVE_PIRQ_TABLE
object irq_tables.o
end
makerule ./failover.E
depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
# depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
depends "$(MAINBOARD)/auto.c ./romcc"
# Note: The -mcpu=p2 is important, or else... 'too few registers'.
action "./romcc -mcpu=p2 -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
# depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
depends "$(MAINBOARD)/auto.c ./romcc"
# Note: The -mcpu=p2 is important, or else... 'too few registers'.
action "./romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
mainboardinit arch/i386/lib/cpu_reset.inc
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit cpu/x86/mmx/enable_mmx.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/mmx/disable_mmx.inc
dir /pc80
config chip.h
# TODO: On-board graphics.
chip northbridge/intel/i82810 # Northbridge
device apic_cluster 0 on # APIC cluster
chip cpu/intel/socket_PGA370 # CPU
device apic 0 on end # APIC
end
end
device pci_domain 0 on # PCI domain
device pci 0.0 on end # Graphics Memory Controller Hub (GMCH)
device pci 1.0 on end # Chipset Graphics Controller (CGC)
chip southbridge/intel/i82801xx # Southbridge
device pci 1e.0 on end # PCI bridge
device pci 1f.0 on # ISA bridge
chip superio/smsc/smscsuperio # Super I/O
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.3 on # Parallel port
io 0x60 = 0x378
irq 0x70 = 7
drq 0x74 = 4
end
device pnp 2e.4 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.5 on # COM2 / IR
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.7 on # PS/2 keyboard / mouse
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1 # PS/2 keyboard interrupt
irq 0x72 = 12 # PS/2 mouse interrupt
end
device pnp 2e.9 on # Game port
io 0x60 = 0x201
end
device pnp 2e.a on # Power-management events (PME)
io 0x60 = 0x600
end
device pnp 2e.b on # MIDI port (MPU-401)
io 0x60 = 0x330
irq 0x70 = 5
end
end
end
device pci 1f.1 on end # IDE
device pci 1f.2 on end # USB
device pci 1f.3 on end # SMbus
device pci 1f.5 off end # AC'97 audio (N/A, uses CS4280 chip)
device pci 1f.6 off end # AC'97 modem (N/A)
register "ide0_enable" = "1"
register "ide1_enable" = "1"
end
end
end

View File

@ -0,0 +1,99 @@
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses HAVE_OPTION_TABLE
uses USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses IRQ_SLOT_COUNT
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses LINUXBIOS_EXTRA_VERSION
uses ARCH
uses FALLBACK_SIZE
uses STACK_SIZE
uses HEAP_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD_START
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses PAYLOAD_SIZE
uses _ROMBASE
uses _RAMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses HAVE_MP_TABLE
uses CROSS_COMPILE
uses CC
uses HOSTCC
uses OBJCOPY
uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses TTYS0_BAUD
uses TTYS0_BASE
uses TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
default ROM_SIZE = 0 # Override this in targets/*/Config.lb.
default HAVE_FALLBACK_BOOT = 1
default HAVE_MP_TABLE = 0
default HAVE_HARD_RESET = 0
default CONFIG_UDELAY_TSC = 1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
default HAVE_PIRQ_TABLE = 1
default IRQ_SLOT_COUNT = 0 # Override this in targets/*/Config.lb.
default MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
default MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
default ROM_IMAGE_SIZE = 64 * 1024
default FALLBACK_SIZE = 128 * 1024
default STACK_SIZE = 8 * 1024
default HEAP_SIZE = 16 * 1024
default HAVE_OPTION_TABLE = 0
#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
default USE_OPTION_TABLE = 0
default _RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
default CROSS_COMPILE = ""
default CC = "$(CROSS_COMPILE)gcc -m32"
default HOSTCC = "gcc"
default CONFIG_CONSOLE_SERIAL8250 = 1
default TTYS0_BAUD = 115200
default TTYS0_BASE = 0x3f8
default TTYS0_LCS = 0x3 # 8n1
default DEFAULT_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config.lb.
default MAXIMUM_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config.lb.
default CONFIG_CONSOLE_VGA = 1 # Override this in targets/*/Config.lb.
default CONFIG_PCI_ROM_RUN = 1 # Override this in targets/*/Config.lb.
end

View File

@ -0,0 +1,73 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define ASSEMBLY 1
#include <stdint.h>
#include <stdlib.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c"
#include "northbridge/intel/i82810/raminit.h"
#include "mainboard/asus/mew-vm/debug.c" /* FIXME */
#include "pc80/udelay_io.c"
#include "lib/delay.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
static inline int spd_read_byte(unsigned int device, unsigned int address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/intel/i82810/raminit.c"
/* #include "northbridge/intel/i82810/debug.c" */
#include "sdram/generic_sdram.c"
static void main(unsigned long bist)
{
static const struct mem_controller memctrl[] = {
{
.d0 = PCI_DEV(0, 0, 0),
.channel0 = {0x50, 0x51},
}
};
if (bist == 0)
early_mtrr_init();
smscsuperio_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
report_bist_failure(bist);
enable_smbus();
/* dump_spd_registers(&memctrl[0]); */
sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
/* ram_check(0, 640 * 1024); */
}

View File

@ -0,0 +1,22 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
extern struct chip_operations mainboard_asus_mew_am_ops;
struct mainboard_asus_mew_am_config {};

View File

@ -0,0 +1,51 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/pirq_routing.h>
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE,
PIRQ_VERSION,
32 + 16 * IRQ_SLOT_COUNT,/* Max. number of devices on the bus */
0x00, /* Interrupt router bus */
(0x1f << 3) | 0x0, /* Interrupt router device */
0, /* IRQs devoted exclusively to PCI usage */
0x8086, /* Vendor */
0x122e, /* Device */
0, /* Crap (miniport) */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0xe3, /* Checksum */
{
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
{0x00,(0x1e<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0},
{0x01,(0x08<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x1, 0x0},
{0x01,(0x09<<3)|0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x01eb8}}, 0x2, 0x0},
{0x01,(0x0a<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x3, 0x0},
{0x01,(0x0b<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x4, 0x0},
{0x00,(0x1f<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0},
{0x00,(0x01<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0},
{0x01,(0x02<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x0, 0x0},
}
};
unsigned long write_pirq_routing_table(unsigned long addr)
{
return copy_pirq_routing_table(addr);
}

View File

@ -0,0 +1,26 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <device/device.h>
#include "chip.h"
struct chip_operations mainboard_asus_mew_am_ops = {
CHIP_NAME("ASUS MEW-AM Mainboard")
};

View File

@ -0,0 +1,49 @@
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
target mew-am
mainboard asus/mew-am
option ROM_SIZE = 512 * 1024
option MAINBOARD_VENDOR = "ASUS"
option MAINBOARD_PART_NUMBER = "MEW-AM"
option IRQ_SLOT_COUNT = 8
option DEFAULT_CONSOLE_LOGLEVEL = 9
option MAXIMUM_CONSOLE_LOGLEVEL = 9
option CONFIG_CONSOLE_VGA = 1
option CONFIG_PCI_ROM_RUN = 1
romimage "normal"
option USE_FALLBACK_IMAGE = 0
option LINUXBIOS_EXTRA_VERSION = ".0Normal"
payload /tmp/filo.elf
end
romimage "fallback"
option USE_FALLBACK_IMAGE = 1
option LINUXBIOS_EXTRA_VERSION = ".0Fallback"
payload /tmp/filo.elf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"