src/soc/intel/common: Clear GPIO driver ownership when not requested
The default state of the HOSTSW_OWN register in the PCH is zero, which configures GPIO pins for ACPI ownership. The board variabt GPIO tables can request specific pins to be configured for GPIO driver ownership. This change sets the HOSTSW_OWN ownership bit when requested and explicitly clears the ownership bit if not requested. BUG=b:120884290 BRANCH=none TEST=Build coreboot on sarien. Verified UEFI to coreboot transition boots successfully. Change-Id: Ia82539dbbbc7cf5dfb9223902d563cafec1a73e5 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/31209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
This commit is contained in:
parent
aa4d9b94fd
commit
cc68c01bec
|
@ -131,23 +131,31 @@ static const struct pad_community *gpio_get_community(gpio_t pad)
|
|||
static void gpio_configure_owner(const struct pad_config *cfg,
|
||||
const struct pad_community *comm)
|
||||
{
|
||||
uint16_t hostsw_reg;
|
||||
uint32_t hostsw_own;
|
||||
uint16_t hostsw_own_offset;
|
||||
int pin;
|
||||
|
||||
pin = relative_pad_in_comm(comm, cfg->pad);
|
||||
|
||||
/* The 4th bit in pad_config 1 (RO) is used to indicate if the pad
|
||||
* needs GPIO driver ownership.
|
||||
*/
|
||||
if (!(cfg->pad_config[1] & PAD_CFG1_GPIO_DRIVER))
|
||||
return;
|
||||
|
||||
/* Based on the gpio pin number configure the corresponding bit in
|
||||
* HOSTSW_OWN register. Value of 0x1 indicates GPIO Driver onwership.
|
||||
*/
|
||||
hostsw_reg = comm->host_own_reg_0;
|
||||
hostsw_reg += gpio_group_index_scaled(comm, pin, sizeof(uint32_t));
|
||||
pcr_or32(comm->port, hostsw_reg, gpio_bitmask_within_group(comm, pin));
|
||||
hostsw_own_offset = comm->host_own_reg_0;
|
||||
hostsw_own_offset += gpio_group_index_scaled(comm, pin,
|
||||
sizeof(uint32_t));
|
||||
|
||||
hostsw_own = pcr_read32(comm->port, hostsw_own_offset);
|
||||
|
||||
/* The 4th bit in pad_config 1 (RO) is used to indicate if the pad
|
||||
* needs GPIO driver ownership. Set the bit if GPIO driver ownership
|
||||
* requested, otherwise clear the bit.
|
||||
*/
|
||||
if (cfg->pad_config[1] & PAD_CFG1_GPIO_DRIVER)
|
||||
hostsw_own |= gpio_bitmask_within_group(comm, pin);
|
||||
else
|
||||
hostsw_own &= ~gpio_bitmask_within_group(comm, pin);
|
||||
|
||||
pcr_write32(comm->port, hostsw_own_offset, hostsw_own);
|
||||
}
|
||||
|
||||
static void gpi_enable_smi(const struct pad_config *cfg,
|
||||
|
|
Loading…
Reference in New Issue