GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

s2735 half update 

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1705 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Yinghai Lu 2004-10-22 18:45:36 +00:00
parent a1653cfea5
commit ccf0bc01aa
14 changed files with 244 additions and 501 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/cpu/intel/model_f2x/Config.lb
View File

@ -7,4 +7,4 @@ dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
driver model_f1x_init.o
driver model_f2x_init.o

4
src/cpu/intel/model_f2x/model_f2x_init.c
View File

@ -30,7 +30,7 @@ static uint32_t microcode_updates[] = {
};
static void model_f2x_init(device_t dev)
static void model_f2x_init(device_t cpu)
{
/* Turn on caching if we haven't already */
x86_enable_cache();
@ -48,7 +48,7 @@ static void model_f2x_init(device_t dev)
};
static struct device_operations cpu_dev_ops = {
.init = model_f1x_init,
.init = model_f2x_init,
};
static struct cpu_device_id cpu_table[] = {
{ X86_VENDOR_INTEL, 0x0f22 },

2
src/cpu/intel/socket_mPGA604_533Mhz/chip.h
View File

@ -1,4 +1,4 @@
extern struct chip_operations cpu_intel_socket_mPGA604_533Mhz_control;
extern struct chip_operations cpu_intel_socket_mPGA604_533Mhz_ops;
struct cpu_intel_socket_mPGA604_533Mhz_config {
};

2
src/cpu/intel/socket_mPGA604_533Mhz/socket_mPGA604_533Mhz.c
View File

@ -2,6 +2,6 @@
#include "chip.h"
struct chip_operations cpu_intel_socket_mPGA604_533Mhz_control = {
struct chip_operations cpu_intel_socket_mPGA604_533Mhz_ops = {
.name = "socket mPGA604_533Mhz",
};

372
src/mainboard/tyan/s2735/Config.lb
View File

@ -1,230 +1,200 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
uses MAINBOARD
uses ARCH
uses HARD_RESET_BUS
uses HARD_RESET_DEVICE
uses HARD_RESET_FUNCTION
#
#
###
### Set all of the defaults for an x86 architecture
###
#
#
###
### Build the objects we have code for in this directory.
###
##object mainboard.o
config chip.h
register "fixup_scsi" = "1"
register "fixup_vga" = "1"
##
## Compute the location and size of where this firmware image
## (linuxBIOS plus bootloader) will live in the boot rom chip.
##
if USE_FALLBACK_IMAGE
default ROM_SECTION_SIZE = FALLBACK_SIZE
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
else
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
default ROM_SECTION_OFFSET = 0
end
##
## Move the default LinuxBIOS cmos range off of AMD RTC registers
## Compute the start location and size size of
## The linuxBIOS bootloader.
##
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
## Compute where this copy of linuxBIOS will start in the boot rom
##
default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
##
## Compute a range of ROM that can cached to speed up linuxBIOS,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
##
default XIP_ROM_SIZE=65536
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
arch i386 end
##
## Build the objects we have code for in this directory.
##
default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
driver mainboard.o
#dir /drvers/adaptec/7902
#dir /drivers/si/3114
#dir /drivers/intel/82551_ipmi
#dir /drivers/ati/ragexl
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#
#default HARD_RESET_BUS=1
#default HARD_RESET_DEVICE=4
#default HARD_RESET_FUNCTION=0
#
arch i386 end
#
###
### Build our 16 bit and 32 bit linuxBIOS entry code
###
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
mainboardinit cpu/i386/bist32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds
#
###
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE
mainboardinit cpu/i386/reset16.inc
ldscript /cpu/i386/reset16.lds
else
mainboardinit cpu/i386/reset32.inc
ldscript /cpu/i386/reset32.lds
end
#
#### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
#
###
### Include an id string (For safe flashing)
###
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
#
####
#### This is the early phase of linuxBIOS startup
#### Things are delicate and we test to see if we should
#### failover to another image.
####
#option MAX_REBOOT_CNT=2
if USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
end
#
###
### Setup our mtrrs
###
#mainboardinit cpu/p6/earlymtrr.inc
###
### Only the bootstrap cpu makes it here.
### Failover if we need to
###
#
if USE_FALLBACK_IMAGE
mainboardinit ./failover.inc
end
#
#
###
### Setup the serial port
###
mainboardinit pc80/serial.inc
mainboardinit arch/i386/lib/console.inc
mainboardinit cpu/i386/bist32_fail.inc
#
####
#### O.k. We aren't just an intermediary anymore!
####
#
###
### When debugging disable the watchdog timer
###
##option MAXIMUM_CONSOLE_LOGLEVEL=7
#default MAXIMUM_CONSOLE_LOGLEVEL=7
#
#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
#
###
### Romcc output
###
#object reset.o
##
## Romcc output
##
makerule ./failover.E
depends "$(MAINBOARD)/failover.c"
action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
end
makerule ./failover.inc
depends "./romcc ./failover.E"
depends "./failover.E ./romcc"
action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
end
makerule ./auto.E
depends "$(MAINBOARD)/auto.c option_table.h"
action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
depends "$(MAINBOARD)/auto.c option_table.h "
action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
end
makerule ./auto.inc
depends "./romcc ./auto.E"
action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E"
# action "./romcc -O2 ./auto.E > auto.inc"
depends "./auto.E ./romcc"
action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc"
end
mainboardinit cpu/p6/enable_mmx_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/p6/disable_mmx_sse.inc
#
##
## Build our 16 bit and 32 bit linuxBIOS entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
##
## Build our reset vector (This is where linuxBIOS is entered)
##
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
###
### Include the secondary Configuration files
### This is the early phase of linuxBIOS startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit cpu/x86/mmx/enable_mmx.inc
mainboardinit cpu/x86/sse/enable_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/sse/disable_sse.inc
mainboardinit cpu/x86/mmx/disable_mmx.inc
##
## Include the secondary Configuration files
##
dir /pc80
config chip.h
# sample config for tyan/s2735
chip northbridge/intel/e7501
device pci_domain 0
device pci 0.0 on end
device pci 0.1 on end
device pci 2.0 on
chip southbridge/intel/i82870
device pci 1c.0
device pci 1d.0
device pci 1e.0
device pci 1f.0
end
end
device pci 6.0 on end
chip southbridge/intel/i82801er
device pci 1d.0 on end
device pci 1d.1 on end
device pci 1d.2 on end
device pci 1d.3 on end
device pci 1d.7 on end
device pci 1e.0 on end
device pci 1f.0 on
# device pci 8.0 end
chip winbond/w83627hf
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off end # CIR
device pnp 2e.7 off end # GAME_MIDI_GIPO1
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
end
end
end
device pci 1f.1 off end
device pci 1f.2 on end
device pci 1f.3 on end
device pci 1f.5 off end
device pci 1f.6 off end
end
end
device apic_cluster 0
chip cpu/intel/socket_mPGA604_533Mhz
apic 0
end
chip cpu/intel/socket_mPGA604_533Mhz
apic 6
end
end
device pci_domain 0 on
device pci 0.0 on end
device pci 0.1 on end
device pci 2.0 on
chip southbridge/intel/i82870
device pci 1c.0 on end
device pci 1d.0 on end
device pci 1e.0 on end
device pci 1f.0 on end
end
end
device pci 6.0 on end
chip southbridge/intel/i82801er
device pci 1d.0 on end
device pci 1d.1 on end
device pci 1d.2 on end
device pci 1d.3 on end
device pci 1d.7 on end
device pci 1e.0 on end
device pci 1f.0 on
# device pci 8.0 end
chip superio/winbond/w83627hf
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off end # CIR
device pnp 2e.7 off end # GAME_MIDI_GIPO1
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
end
end
end
device pci 1f.1 off end
device pci 1f.2 on end
device pci 1f.3 on end
device pci 1f.5 off end
device pci 1f.6 off end
end
end
device apic_cluster 0 on
chip cpu/intel/socket_mPGA604_533Mhz
device apic 0 on end
end
chip cpu/intel/socket_mPGA604_533Mhz
device apic 6 on end
end
end
end
dir /pc80
#dir /bioscall

37
src/mainboard/tyan/s2735/auto.c
View File

@ -1,10 +1,12 @@
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/smp/lapic.h>
#include <cpu/x86/lapic.h>
#include <arch/cpu.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
@ -12,17 +14,13 @@
#include "ram/ramtest.c"
#include "southbridge/intel/i82801er/i82801er_early_smbus.c"
#include "northbridge/intel/e7501/raminit.h"
#if 1
#include "cpu/p6/apic_timer.c"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#endif
#include "cpu/p6/boot_cpu.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/intel/e7501/debug.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/p6/earlymtrr.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@ -55,7 +53,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/intel/e7501/reset_test.c"
#include "sdram/generic_sdram.c"
static void main(void)
static void main(unsigned long bist)
{
static const struct mem_controller memctrl[] = {
{
@ -66,14 +64,21 @@ static void main(void)
},
};
#if 1
enable_lapic();
init_timer();
#endif
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
enable_lapic();
init_timer();
}
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
// setup_default_resource_map();
#if 0
print_pci_devices();

2
src/mainboard/tyan/s2735/chip.h
View File

@ -1,4 +1,4 @@
extern struct chip_operations mainboard_tyan_s2735_control;
extern struct chip_operations mainboard_tyan_s2735_ops;
struct mainboard_tyan_s2735_config {
int fixup_scsi;

16
src/mainboard/tyan/s2735/failover.c
View File

@ -4,22 +4,14 @@
#include <device/pci_ids.h>
#include <arch/io.h>
#include <arch/romcc_io.h>
#include <arch/smp/lapic.h>
#include <cpu/x86/lapic.h>
#include "pc80/mc146818rtc_early.c"
#include "southbridge/intel/i82801er/cmos_failover.c"
#include "cpu/p6/boot_cpu.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/intel/e7501/reset_test.c"
#define HAVE_REGPARM_SUPPORT 0
#if HAVE_REGPARM_SUPPORT
static unsigned long main(unsigned long bist)
{
#else
static void main(void)
{
unsigned long bist = 0;
#endif
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal()) {
goto normal_image;
@ -51,9 +43,5 @@ static void main(void)
);
#endif
fallback_image:
#if HAVE_REGPARM_SUPPORT
return bist;
#else
return;
#endif
}

4
src/mainboard/tyan/s2735/mainboard.c
View File

@ -139,10 +139,10 @@ static struct device_operations mainboard_operations = {
static void enable_dev(device_t dev)
{
dev->ops = &mainboard_ops;
dev->ops = &mainboard_operations;
}
struct chip_operations mainboard_tyan_s2735_control = {
struct chip_operations mainboard_tyan_s2735_ops = {
.enable_dev = enable_dev,
.name = "Tyan s2735 mainboard ",
};

26
src/mainboard/tyan/s2735/mptable.c
View File

@ -4,7 +4,7 @@
#include <string.h>
#include <stdint.h>
void *smp_write_config_table(void *v, unsigned long * processor_map)
void *smp_write_config_table(void *v)
{
static const char sig[4] = "PCMP";
static const char oem[8] = "TYAN ";
@ -28,7 +28,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
mc->mpe_checksum = 0;
mc->reserved = 0;
smp_write_processors(mc, processor_map);
smp_write_processors(mc);
/*Bus: Bus ID Type*/
@ -41,19 +41,21 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
/*I/O APICs: APIC ID Version State Address*/
smp_write_ioapic(mc, 8, 0x20, 0xfec00000);
{
struct pci_dev *dev;
uint32_t base;
device_t dev;
struct resource *res;
dev = dev_find_slot(1, PCI_DEVFN(0x1e,0));
if (dev) {
base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
base &= PCI_BASE_ADDRESS_MEM_MASK;
smp_write_ioapic(mc, 9, 0x20, base);
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res) {
smp_write_ioapic(mc, 0x09, 0x20, res->base);
}
}
dev = dev_find_slot(1, PCI_DEVFN(0x1c,0));
if (dev) {
base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
base &= PCI_BASE_ADDRESS_MEM_MASK;
smp_write_ioapic(mc, 0xa, 0x20, base);
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res) {
smp_write_ioapic(mc, 0x0a, 0x20, res->base);
}
}
}
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
@ -157,9 +159,9 @@ Compatibility Bus Address
return smp_next_mpe_entry(mc);
}
unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map)
unsigned long write_smp_table(unsigned long addr)
{
void *v;
v = smp_write_floating_table(addr);
return (unsigned long)smp_write_config_table(v, processor_map);
return (unsigned long)smp_write_config_table(v);
}

2
src/mainboard/tyan/s4880/Options.lb
View File

@ -105,7 +105,7 @@ default LB_CKS_LOC=123
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
default CONFIG_MAX_CPUS=4
##
## Build code to setup a generic IOAPIC

2
src/mainboard/tyan/s4882/Options.lb
View File

@ -105,7 +105,7 @@ default LB_CKS_LOC=123
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
default CONFIG_MAX_CPUS=4
##
## Build code to setup a generic IOAPIC

272
targets/tyan/s2735/Config.lb
View File

@ -1,265 +1,43 @@
# Sample config file for
# the Tyan s2735
# the Tyan s2735
# This will make a target directory of ./s2735
loadoptions
target s2735
mainboard tyan/s2735
uses ARCH
uses CONFIG_COMPRESS
uses CONFIG_IOAPIC
uses CONFIG_ROM_STREAM
uses CONFIG_ROM_STREAM_START
uses CONFIG_SMP
uses CONFIG_UDELAY_TSC
uses CPU_FIXUP
uses FALLBACK_SIZE
uses HAVE_FALLBACK_BOOT
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses i586
uses i686
uses INTEL_PPRO_MTRR
uses HEAP_SIZE
uses IRQ_SLOT_COUNT
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
#uses MEMORY_HOLE
uses PAYLOAD_SIZE
uses _RAMBASE
uses _ROMBASE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_OFFSET
uses ROM_SECTION_SIZE
uses ROM_SIZE
uses STACK_SIZE
uses USE_FALLBACK_IMAGE
uses USE_OPTION_TABLE
uses HAVE_OPTION_TABLE
uses CONFIG_CHIP_CONFIGURE
uses CONFIG_CONSOLE_BTEXT
uses CONFIG_CONSOLE_SERIAL8250
uses TTYS0_BAUD
#SMDC Support
#uses CONFIG_CONSOLE_SERIAL8250_2
#uses TTYS1_BAUD
uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses DEBUG
uses CONFIG_MAX_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses LINUXBIOS_EXTRA_VERSION
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses CONFIG_FS_STREAM
uses CONFIG_IDE
uses HAVE_HARD_RESET
#uses CONFIG_VGABIOS
#uses CONFIG_REALMODE_IDT
#uses CONFIG_PCIBIOS
#uses VGABIOS_START
#uses SCSIFW_START
#
#uses CONFIG_LSI_SCSI_FW_FIXUP
option HAVE_OPTION_TABLE=1
option HAVE_MP_TABLE=1
option CPU_FIXUP=1
option CONFIG_UDELAY_TSC=0
option i686=1
option i586=1
option INTEL_PPRO_MTRR=1
#option ROM_SIZE=524288
option ROM_SIZE=1048576
option HAVE_HARD_RESET=1
#option CONFIG_CONSOLE_BTEXT=1
#option CONFIG_VGABIOS=1
#option CONFIG_REALMODE_IDT=1
#option CONFIG_PCIBIOS=1
#option VGABIOS_START=0xfff8c000
#option SCSIFW_START=0xfff80000
#option CONFIG_FS_STREAM=1
#option CONFIG_IDE=1
option HAVE_FALLBACK_BOOT=1
# use the new chip configure code.
option CONFIG_CHIP_CONFIGURE=1
#option CONFIG_LSI_SCSI_FW_FIXUP=1
#
###
### Build code to export a programmable irq routing table
###
option HAVE_PIRQ_TABLE=1
option IRQ_SLOT_COUNT=15
#
###
### Build code for SMP support
### Only worry about 2 micro processors
###
option CONFIG_SMP=1
option CONFIG_MAX_CPUS=4
option CONFIG_LOGICAL_CPUS=1
option CONFIG_MAX_PHYSICAL_CPUS=2
#
###
### Build code to setup a generic IOAPIC
###
option CONFIG_IOAPIC=1
#
###
### MEMORY_HOLE instructs earlymtrr.inc to
### enable caching from 0-640KB and to disable
### caching from 640KB-1MB using fixed MTRRs
###
### Enabling this option breaks SMP because secondary
### CPU identification depends on only variable MTRRs
### being enabled.
###
#option MEMORY_HOLE=0
#
###
### Clean up the motherboard id strings
###
option MAINBOARD_PART_NUMBER="S2735"
option MAINBOARD_VENDOR="Tyan"
###
### Compute the location and size of where this firmware image
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
#option FALLBACK_SIZE=524288
#option FALLBACK_SIZE=98304
option FALLBACK_SIZE=131072
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
option ROM_IMAGE_SIZE=65536
###
### Compute where this copy of linuxBIOS will start in the boot rom
###
#
###
## We do use compressed image
option CONFIG_COMPRESS=1
option CONFIG_CONSOLE_SERIAL8250=1
option TTYS0_BAUD=115200
#SMDC support
#option CONFIG_CONSOLE_SERIAL8250_2=1
#option TTYS1_BAUD=19200
##
### Select the linuxBIOS loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
option DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
option MAXIMUM_CONSOLE_LOGLEVEL=8
option DEBUG=1
#
## LinuxBIOS C code runs at this location in RAM
option _RAMBASE=0x004000
##
## Use a 32K stack
##
option STACK_SIZE=0x8000
##
## Use a 56K heap
##
option HEAP_SIZE=0xe000
#
###
### Compute the start location and size size of
### The linuxBIOS bootloader.
###
option CONFIG_ROM_STREAM = 1
#
#
# Tyan s2735
romimage "normal"
# 48K for SCSI FW
# 48K for SCSI FW
# option ROM_SIZE = 475136
# 48K for SCSI FW and 48K for ATI ROM
# option ROM_SIZE = 425984
# 48K for SCSI FW and 48K for ATI ROM
# option ROM_SIZE = 425984
# 64K for Etherboot
# option ROM_SIZE = 458752
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
option USE_FALLBACK_IMAGE=0
option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
option ROM_SECTION_OFFSET= 0
option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
# option XIP_ROM_SIZE = FALLBACK_SIZE
option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2735
# payload ../../../payloads/e1000--ide_disk.zelf
# option ROM_SIZE = 458752
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
# payload ../../../payloads/filo_mem_btext.elf
# payload ../../../payloads/filo_btext.zelf
payload ../../../payloads/e1000--filo_btext.zelf
# payload ../../../payloads/filo.zelf
# payload ../../../payloads/tg3--filo.zelf
# payload ../../../payloads/e1000--filo.zelf
# payload ../../../payloads/tg3--e1000--filo.zelf
payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
option ROM_SECTION_SIZE = FALLBACK_SIZE
option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
# option XIP_ROM_SIZE = FALLBACK_SIZE
option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2735
# payload ../../../payloads/e1000--ide_disk.zelf
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
# payload ../../../payloads/filo_mem_btext.elf
# payload ../../../payloads/e1000_btext.zelf
payload ../../../payloads/e1000--filo_btext.zelf
# payload ../../../payloads/filo.zelf
# payload ../../../payloads/tg3--filo.zelf
# payload ../../../payloads/e1000--filo.zelf
# payload ../../../payloads/tg3--e1000--filo.zelf
payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"

2
targets/tyan/s2735/ns2735
View File

@ -1,5 +1,5 @@
#!/bin/bash
TYANMB=s27i35
TYANMB=s2735
cd "$TYANMB"
make
#cat ../fwx.rom ../atix.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"