mb/google/brya/var/redrix: Correct WWAN power sequence

Correct the WWAN power sequence to meet spec

BUG=b:206079177
TEST=build

Change-Id: Ibba1ecc04b563ae4eedd7596594f33812cbac150
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

src/mainboard/google/brya/Kconfig.name

@@ -42,6 +42,7 @@ config BOARD_GOOGLE_REDRIX
 	select DRIVERS_GENESYSLOGIC_GL9755
 	select DRIVERS_GFX_GENERIC
 	select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES
+	select HAVE_WWAN_POWER_SEQUENCE
 
 config BOARD_GOOGLE_KANO
 	bool "->  Kano"

src/mainboard/google/brya/variants/redrix/Makefile.inc

@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
+
 ramstage-y += gpio.c
 
 ramstage-$(CONFIG_FW_CONFIG) += fw_config.c

src/mainboard/google/brya/variants/redrix/gpio.c

@@ -37,13 +37,14 @@ static const struct pad_config override_gpio_table[] = {
 	PAD_NC(GPP_E3, NONE),
 	/* E7  : PROC_GP1 ==> NC */
 	PAD_NC(GPP_E7, NONE),
+	/* E16 : RSVD_TP ==> WWAN_RST_L */
+	PAD_CFG_GPO(GPP_E16, 1, DEEP),
 	/* E20 : DDP2_CTRLCLK ==> NC */
 	PAD_NC(GPP_E20, NONE),
 	/* E22 : DDPA_CTRLCLK ==> NC */
 	PAD_NC(GPP_E22, NONE),
 	/* E23 : DDPA_CTRLDATA ==> NC */
 	PAD_NC(GPP_E23, NONE),
-
 	/* F20 : EXT_PWR_GATE# ==> NC */
 	PAD_NC(GPP_F20, NONE),
 
@@ -67,11 +68,17 @@ static const struct pad_config override_gpio_table[] = {
 	PAD_NC(GPP_S6, NONE),
 	/* S7 : SNDW3_DATA ==> NC */
 	PAD_NC(GPP_S7, NONE),
-
+	/*
+	 * E0 : SATAXPCIE0 ==> WWAN_PERST_L
+	 * Drive high here, so that PERST_L is sequenced after RST_L
+	 */
+	PAD_CFG_GPO(GPP_E0, 1, DEEP),
 };
 
 /* Early pad configuration in bootblock */
 static const struct pad_config early_gpio_table[] = {
+	/* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */
+	PAD_CFG_GPO(GPP_A12, 1, DEEP),
 	/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
 	PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
 	/* B7  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
@@ -91,16 +98,18 @@ static const struct pad_config early_gpio_table[] = {
 	PAD_CFG_GPO(GPP_D2, 1, DEEP),
 	/* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */
 	PAD_CFG_GPO(GPP_D11, 1, DEEP),
-	/* E0  : SATAXPCIE0 ==> NC */
-	PAD_NC(GPP_E0, NONE),
+	/* E0  : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */
+	PAD_CFG_GPO(GPP_E0, 0, DEEP),
 	/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
 	PAD_CFG_GPI(GPP_E13, NONE, DEEP),
 	/* E15 : RSVD_TP ==> PCH_WP_OD */
 	PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
-	/* E16 : RSVD_TP ==> WWAN_RST_L  */
+	/* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */
 	PAD_CFG_GPO(GPP_E16, 0, DEEP),
 	/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
 	PAD_CFG_GPI(GPP_F18, NONE, DEEP),
+	/* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (updated in romstage) */
+	PAD_CFG_GPO(GPP_F21, 0, DEEP),
 	/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
 	PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
 	/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
@@ -115,6 +124,11 @@ static const struct pad_config early_gpio_table[] = {
 	PAD_CFG_GPO(GPP_B4, 0, DEEP),
 };
 
+static const struct pad_config romstage_gpio_table[] = {
+	/* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (set here for correct power sequencing) */
+	PAD_CFG_GPO(GPP_F21, 1, DEEP),
+};
+
 const struct pad_config *variant_gpio_override_table(size_t *num)
 {
 	*num = ARRAY_SIZE(override_gpio_table);
@@ -126,3 +140,9 @@ const struct pad_config *variant_early_gpio_table(size_t *num)
 	*num = ARRAY_SIZE(early_gpio_table);
 	return early_gpio_table;
 }
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}

src/mainboard/google/brya/variants/redrix/include/variant/gpio.h

@@ -5,4 +5,10 @@
 
 #include <baseboard/gpio.h>
 
+#define WWAN_FCPO	GPP_F21
+#define WWAN_RST	GPP_E16
+#define WWAN_PERST	GPP_E0
+#define T1_OFF_MS	16
+#define T2_OFF_MS	2
+
 #endif