mb/google/rex: Add PCIe based SD controller

This patch adds PCIe based SD controller at RP 7 (from RP 11) with
Proto 1 schematics dated 11/30.

Additionally, added the RTD3 entries for the SD controller.

Finally, ensured that EN_PP3300_SD (GPP_D03) is configured in
bootblock and SD_PERST_L (GPP_D02) is configured in romstage to
meet the power cycle requirement.

BUG=b:242917011
TEST=Able to build and boot Google/Rex. SD card detection is due
for the Proto 1 hardware.

Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23d53e4d61ec36d2145f9e5816d97d13eb5b219e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70064
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This commit is contained in:
Subrata Banik 2022-11-28 17:51:49 +05:30
parent 8ca7d26626
commit cd6a45029e
2 changed files with 17 additions and 9 deletions

View File

@ -425,6 +425,8 @@ static const struct pad_config romstage_gpio_table[] = {
PAD_CFG_GPO(GPP_C23, 0, DEEP), PAD_CFG_GPO(GPP_C23, 0, DEEP),
/* GPP_E07 : [] ==> WWAN_FCPO_L */ /* GPP_E07 : [] ==> WWAN_FCPO_L */
PAD_CFG_GPO(GPP_E07, 1, DEEP), PAD_CFG_GPO(GPP_E07, 1, DEEP),
/* GPP_D02 : [] ==> SD_PERST_L */
PAD_CFG_GPO(GPP_D02, 1, DEEP),
}; };
const struct pad_config *variant_gpio_table(size_t *num) const struct pad_config *variant_gpio_table(size_t *num)

View File

@ -126,15 +126,6 @@ chip soc/intel/meteorlake
.flags = PCIE_RP_LTR | PCIE_RP_AER, .flags = PCIE_RP_LTR | PCIE_RP_AER,
}" }"
end #PCIE9 SSD card end #PCIE9 SSD card
device ref pcie_rp11 on
probe DB_SD SD_GL9755S
# Enable SD Card PCIE 11 using clk 2
register "pcie_rp[PCH_RP(11)]" = "{
.clk_src = 2,
.clk_req = 2,
.flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
}"
end #PCIE11 SD card
device ref tbt_pcie_rp0 on end device ref tbt_pcie_rp0 on end
device ref tbt_pcie_rp2 on end device ref tbt_pcie_rp2 on end
device ref tcss_xhci on device ref tcss_xhci on
@ -471,6 +462,21 @@ chip soc/intel/meteorlake
device generic 0 on end device generic 0 on end
end end
end #PCIE6 WWAN card end #PCIE6 WWAN card
device ref pcie_rp7 on
# Enable SD Card PCIE 7 using clk 2
register "pcie_rp[PCH_RP(7)]" = "{
.clk_src = 2,
.clk_req = 2,
.flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
}"
chip soc/intel/common/block/pcie/rtd3
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D03)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D02)"
register "srcclk_pin" = "2"
device generic 0 on end
end
probe DB_SD SD_GL9755S
end
device ref gspi1 on device ref gspi1 on
chip drivers/spi/acpi chip drivers/spi/acpi
register "name" = ""CRFP"" register "name" = ""CRFP""