soc/intel/{adl, cmn}: Send CSE EOP Async CMD early

This patch sends the CSE EOP command asynchronous implementation early
as part of `soc_init_pre_device`.

Without this patch the duration between asynchronous CSE EOP send and
receive commands is not ample whichcauses idle delay while waiting
for EOP response.

The goal of the CSE async implementation is to avoid idle delay while
capturing the response from CSE EOP cmd.

This patch helps to create ample duration between CSE EOP command
being sent and response being captured.

TEST=Able to boot google/marasov EVT sku to ChromeOS and observed
~30ms of boot time savings (across warm and cold reset scenarios).

Without this patch:

  963:returning from FspMultiPhaseSiInit          907,326 (97,293)
  ...
  ...
  115:finished elog init                          967,343 (2,581)
  942:before sending EOP to ME                    967,821 (478)
  … 
  16:finished LZMA decompress (ignore for x86)    1,017,937 (12,135)
  943:after sending EOP to ME                     1,067,799 (49,861)
  …
  …
  1101:jumping to kernel                          1,144,587 (13,734)

  Total Time: 1,144,549

With this patch:
  963:returning from FspMultiPhaseSiInit          918,291 (97,320)
  942:before sending EOP to ME                    918,522 (230)
  ...
  ...
  16:finished LZMA decompress (ignore for x86)    1,029,476 (12,483)
  943:after sending EOP to ME                     1,033,456 (3,980)
  ...
  ...
  1101:jumping to kernel                          1,111,410 (14,007)

  Total Time: 1,111,375

Change-Id: Idaf45ef28747bebc02347f0faa77cc858a4a8ef1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
This commit is contained in:
Subrata Banik 2023-04-09 08:07:11 +00:00
parent e46dbf771b
commit cda48b297c
2 changed files with 13 additions and 11 deletions

View File

@ -203,7 +203,8 @@ void soc_init_pre_device(void *chip_info)
* current boot sequence) to reduce message response time from CSE hence moving
* sending EOP to earlier stage.
*/
if (CONFIG(SOC_INTEL_CSE_SEND_EOP_EARLY)) {
if (CONFIG(SOC_INTEL_CSE_SEND_EOP_EARLY) ||
CONFIG(SOC_INTEL_CSE_SEND_EOP_ASYNC)) {
printk(BIOS_INFO, "Sending EOP early from SoC\n");
cse_send_end_of_post();
}

View File

@ -1424,22 +1424,23 @@ void cse_late_finalize(void)
*/
static void cse_final(struct device *dev)
{
/* SoC user decided to send EOP late */
if (CONFIG(SOC_INTEL_CSE_SEND_EOP_LATE))
/*
* SoC user can have two options for sending EOP:
* 1. Choose to send EOP late
* 2. Choose to send EOP cmd asynchronously
*
* In case of sending EOP in asynchronous mode, the EOP command
* has most likely not been completed yet. The finalization steps
* will be run once the EOP command has successfully been completed.
*/
if (CONFIG(SOC_INTEL_CSE_SEND_EOP_LATE) ||
CONFIG(SOC_INTEL_CSE_SEND_EOP_ASYNC))
return;
/* 1. Send EOP to CSE if not done.*/
if (CONFIG(SOC_INTEL_CSE_SET_EOP))
cse_send_end_of_post();
/*
* In asynchronous mode, the EOP command has most likely not been
* completed yet. Finalization steps will be run once the EOP command
* has successfully been completed.
*/
if (CONFIG(SOC_INTEL_CSE_SEND_EOP_ASYNC))
return;
if (!CONFIG(USE_FSP_NOTIFY_PHASE_READY_TO_BOOT))
cse_final_ready_to_boot();