docs/mb/supermicro/x11ssm-f: Update board documentation

- Drop vanished issue on PCIe warning
- Drop TODO section, since the TODOs are done
- Document the jumper J6, that was not documented by the vendor. Its
  function has been determined by dissecting a dead board.
- The flash is not socketed anymore. Drop that note and compress the
  whole paragraph. Also add a note about flashing via the BMC web
  interface.

Change-Id: I2b5a08a6b6d80717621d6a30f31829fe4b84891a
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by:  Felix Singer <felixsinger@posteo.net>
This commit is contained in:
Michael Niewöhner 2020-11-26 19:43:08 +01:00
parent 0f34054964
commit ce04a42db9
1 changed files with 8 additions and 9 deletions

View File

@ -4,11 +4,11 @@ This section details how to run coreboot on the [Supermicro X11SSM-F].
## Flashing coreboot ## Flashing coreboot
The board can be flashed externally. FTDI FT2232H and FT232H based programmers worked. The board can be flashed externally. FTDI FT2232H and FT232H based programmers worked. For this,
one needs to add a diode between VCC and the flash chip. The flash IC [MX25L12873F] can be found
near PCH PCIe Slot 4.
The flash IC [MX25L12873F] can be found near PCH PCIe Slot 4. It is socketed on retail boards. Flashing is also possible through the BMC web interface, when a valid license was entered.
For doing ISP (In-System-Programming) one needs to add a diode between VCC and the flash chip.
## BMC (IPMI) ## BMC (IPMI)
@ -16,6 +16,10 @@ This board has an ASPEED [AST2400], which has BMC/[IPMI] functionality. The BMC
32 MiB SOIC-16 chip in the corner of the mainboard near the PCH PCIe Slot 4. This chip is a 32 MiB SOIC-16 chip in the corner of the mainboard near the PCH PCIe Slot 4. This chip is a
[MX25L25635F]. [MX25L25635F].
## Disabling LAN firmware
To disable the proprietary LAN firmware, the undocumented jumper J6 can be set to 2-3.
## Tested and working ## Tested and working
- GRUB2 payload with Debian testing and kernel 5.2 - GRUB2 payload with Debian testing and kernel 5.2
@ -32,14 +36,9 @@ This board has an ASPEED [AST2400], which has BMC/[IPMI] functionality. The BMC
## Known issues ## Known issues
- See general issue section - See general issue section
- "only partially covers this bridge" info from Linux kernel (what does that mean?)
- LNXTHERM missing - LNXTHERM missing
- S3 resume not working - S3 resume not working
## ToDo
- Fix TODOs mentioned in code
## Technology ## Technology
```eval_rst ```eval_rst