diff --git a/src/mainboard/purism/librem_whl/Kconfig b/src/mainboard/purism/librem_whl/Kconfig new file mode 100644 index 0000000000..bc25fb5b3b --- /dev/null +++ b/src/mainboard/purism/librem_whl/Kconfig @@ -0,0 +1,62 @@ +config BOARD_PURISM_BASEBOARD_LIBREM_WHL + def_bool n + select BOARD_ROMSIZE_KB_16384 + select DRIVERS_GENERIC_CBFS_SERIAL + select DRIVERS_USB_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_GMA_HAVE_VBT + select NO_UART_ON_SUPERIO + select SOC_INTEL_COMMON_BLOCK_HDA + select SOC_INTEL_COMMON_BLOCK_HDA_VERB + select SOC_INTEL_WHISKEYLAKE + select SPD_READ_BY_WORD + select USE_LEGACY_8254_TIMER + +if BOARD_PURISM_BASEBOARD_LIBREM_WHL + +config MAINBOARD_DIR + string + default "purism/librem_whl" + +config MAINBOARD_FAMILY + string + default "Librem Mini" if BOARD_PURISM_LIBREM_MINI + +config MAINBOARD_PART_NUMBER + string + default "Librem Mini" if BOARD_PURISM_LIBREM_MINI + +config VARIANT_DIR + string + default "librem_mini" if BOARD_PURISM_LIBREM_MINI + +config CBFS_SIZE + hex + default 0x800000 + +config MAX_CPUS + int + default 8 + +config DIMM_MAX + int + default 2 + +config DIMM_SPD_SIZE + int + default 512 + +config VGA_BIOS_ID + string + default "8086,3ea0" + +config PXE_ROM_ID + string + default "10ec,8168" + +# This platform has limited means to display POST codes +config NO_POST + default y + +endif diff --git a/src/mainboard/purism/librem_whl/Kconfig.name b/src/mainboard/purism/librem_whl/Kconfig.name new file mode 100644 index 0000000000..41a4003102 --- /dev/null +++ b/src/mainboard/purism/librem_whl/Kconfig.name @@ -0,0 +1,3 @@ +config BOARD_PURISM_LIBREM_MINI + bool "Librem Mini" + select BOARD_PURISM_BASEBOARD_LIBREM_WHL diff --git a/src/mainboard/purism/librem_whl/Makefile.inc b/src/mainboard/purism/librem_whl/Makefile.inc new file mode 100644 index 0000000000..ba157dfd05 --- /dev/null +++ b/src/mainboard/purism/librem_whl/Makefile.inc @@ -0,0 +1,7 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += variants/$(VARIANT_DIR)/gpio.c +ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c +ramstage-y += ramstage.c + +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include diff --git a/src/mainboard/purism/librem_whl/acpi/mainboard.asl b/src/mainboard/purism/librem_whl/acpi/mainboard.asl new file mode 100644 index 0000000000..0c9a76b168 --- /dev/null +++ b/src/mainboard/purism/librem_whl/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Scope (\_SB.PCI0.LPCB) +{ + Device (AC) + { + Name (_HID, "ACPI0003") + Name (_PCL, Package () { LPCB }) + Name (ACFG, One) + + Method (_PSR, 0, NotSerialized) + { + Return (ACFG) + } + } +} diff --git a/src/mainboard/purism/librem_whl/board_info.txt b/src/mainboard/purism/librem_whl/board_info.txt new file mode 100644 index 0000000000..e72dcdf2b7 --- /dev/null +++ b/src/mainboard/purism/librem_whl/board_info.txt @@ -0,0 +1,8 @@ +Vendor name: Purism +Board name: librem_whl +Category: desktop +Release year: 2020 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/purism/librem_whl/devicetree.cb b/src/mainboard/purism/librem_whl/devicetree.cb new file mode 100644 index 0000000000..c122bb8982 --- /dev/null +++ b/src/mainboard/purism/librem_whl/devicetree.cb @@ -0,0 +1,317 @@ +chip soc/intel/cannonlake + # Lock Down + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + +# ACPI (soc/intel/cannonlake/acpi.c) + # Disable s0ix + register "s0ix_enable" = "0" + + # PM Timer Enabled + register "PmTimerDisabled" = "0" + + # Disable DPTF + register "dptf_enable" = "0" + +# CPU (soc/intel/cannonlake/cpu.c) + # Power limit + register "power_limits_config" = "{ + .tdp_pl1_override = 25, + .tdp_pl2_override = 28, + }" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable Enhanced Intel SpeedStep + register "eist_enable" = "1" + +# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c) + register "SaGv" = "SaGv_Enabled" + +# FSP Silicon (soc/intel/cannonlake/fsp_params.c) + # Serial I/O + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, + [PchSerialIoIndexSPI0] = PchSerialIoDisabled, + [PchSerialIoIndexSPI1] = PchSerialIoDisabled, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoDisabled, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # SATA + register "SataMode" = "Sata_AHCI" + register "SataSalpSupport" = "0" + register "SataPortsEnable[0]" = "1" # 2.5" + register "SataPortsEnable[2]" = "1" # m.2 + register "SataPortsDevSlp[0]" = "0" + register "SataPortsDevSlp[2]" = "0" + + # Audio + register "PchHdaDspEnable" = "0" + register "PchHdaAudioLinkHda" = "1" + register "PchHdaAudioLinkDmic0" = "0" + register "PchHdaAudioLinkDmic1" = "0" + register "PchHdaAudioLinkSsp0" = "0" + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkSsp2" = "0" + register "PchHdaAudioLinkSndw1" = "0" + register "PchHdaAudioLinkSndw2" = "0" + register "PchHdaAudioLinkSndw3" = "0" + register "PchHdaAudioLinkSndw4" = "0" + + # USB + register "SsicPortEnable" = "0" + + # USB2 + register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front left upper + register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front left lower + register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A rear upper + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front right lower + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front right upper + register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC3)" # Type-C rear + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # m.2-2230/Bluetooth + register "usb2_ports[7]" = "USB2_PORT_EMPTY" # NC + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # NC + register "usb2_ports[9]" = "USB2_PORT_MID(OC2)" # Type-A rear lower + register "usb2_ports[10]" = "USB2_PORT_EMPTY" # NC + register "usb2_ports[11]" = "USB2_PORT_EMPTY" # NC + register "usb2_ports[12]" = "USB2_PORT_EMPTY" # NC + register "usb2_ports[13]" = "USB2_PORT_EMPTY" # NC + register "usb2_ports[14]" = "USB2_PORT_EMPTY" # NC + register "usb2_ports[15]" = "USB2_PORT_EMPTY" # NC + + # USB3 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A front left upper + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A front left lower + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # NC + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-C rear + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # Type-A rear lower + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)" # Type-A rear upper + register "usb3_ports[6]" = "USB3_PORT_EMPTY" # NC + register "usb3_ports[7]" = "USB3_PORT_EMPTY" # NC + register "usb3_ports[8]" = "USB3_PORT_EMPTY" # NC + register "usb3_ports[9]" = "USB3_PORT_EMPTY" # NC + + # All SRCCLKREQ pins mapped directly + register "PcieClkSrcClkReq[0]" = "0" + register "PcieClkSrcClkReq[1]" = "1" + register "PcieClkSrcClkReq[2]" = "2" + register "PcieClkSrcClkReq[3]" = "3" + register "PcieClkSrcClkReq[4]" = "4" + register "PcieClkSrcClkReq[5]" = "5" + + # Set all SRCCLKREQ pins as free-use + register "PcieClkSrcUsage[0]" = "0x80" + register "PcieClkSrcUsage[1]" = "0x80" + register "PcieClkSrcUsage[2]" = "0x80" + register "PcieClkSrcUsage[3]" = "0x80" + register "PcieClkSrcUsage[4]" = "0x80" + register "PcieClkSrcUsage[5]" = "0x80" + + # PCI Express Root Port #8 x1, Clock 2 (WLAN) + register "PcieRpEnable[7]" = "1" + register "PcieRpLtrEnable[7]" = "1" + + # PCI Express Root Port #10 x1, Clock 3 (LAN) + register "PcieRpEnable[9]" = "1" + register "PcieRpLtrEnable[9]" = "0" + + # PCI Express Root port #13 x4, Clock 1 (NVMe) + register "PcieRpEnable[12]" = "1" + register "PcieRpLtrEnable[12]" = "1" + + # Misc + register "AcousticNoiseMitigation" = "1" + register "satapwroptimize" = "1" + + # Power + register "PchPmSlpS3MinAssert" = "3" # 50ms + register "PchPmSlpS4MinAssert" = "1" # 1s + register "PchPmSlpSusMinAssert" = "2" # 500ms + register "PchPmSlpAMinAssert" = "4" # 2s + + # Thermal + register "tcc_offset" = "12" + + # Serial IRQ Mode + register "serirq_mode" = "SERIRQ_CONTINUOUS" + +# PMC (soc/intel/cannonlake/pmc.c) + # Disable deep Sx states + register "deep_sx_config" = "0" + +# PM Util (soc/intel/cannonlake/pmutil.c) + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + # sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG) + register "gpe0_dw0" = "PMC_GPP_C" + register "gpe0_dw1" = "PMC_GPP_D" + register "gpe0_dw2" = "PMC_GPP_E" + +# Actual device tree + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 04.0 on # SA Thermal device + register "Device4Enable" = "1" + end + device pci 12.0 on end # Thermal Subsystem + device pci 13.0 off end # Integrated Sensor Hub + device pci 14.0 on # USB xHCI + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left Upper"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left Lower"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Upper"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right Lower"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right Upper"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 3)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + device usb 2.7 off end + end + chip drivers/usb/acpi + device usb 2.8 off end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Lower"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left Upper"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left Lower"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + device usb 3.2 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Lower"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Upper"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.5 on end + end + end + end + end + device pci 14.1 off end # USB xDCI (OTG) + device pci 15.0 off end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 off # Management Engine Interface 1 + # HECI must be enabled w/HAP disable else S3 issues + register "HeciEnabled" = "1" + end + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off # Management Engine Interface 3 + register "Heci3Enabled" = "0" + end + device pci 16.5 off end # Management Engine Interface 4 + device pci 17.0 on end # SATA + device pci 19.0 off end # I2C #4 + device pci 19.1 off end # I2C #5 + device pci 19.2 off end # UART #2 + device pci 1a.0 off end # eMMC + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 on end # PCI Express Port 8 (WLAN) + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 on end # PCI Express Port 10 (LAN) + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1d.4 on end # PCI Express Port 13 (NVMe) + device pci 1d.5 off end # PCI Express Port 14 + device pci 1d.6 off end # PCI Express Port 15 + device pci 1d.7 off end # PCI Express Port 16 + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1f.0 on end # LPC Bridge + device pci 1f.1 off end # P2SB + device pci 1f.2 off end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/purism/librem_whl/dsdt.asl b/src/mainboard/purism/librem_whl/dsdt.asl new file mode 100644 index 0000000000..296be17b35 --- /dev/null +++ b/src/mainboard/purism/librem_whl/dsdt.asl @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, /* DSDT revision: ACPI v2.0 and up */ + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 /* OEM revision */ +) +{ + #include + #include + #include + + Device (\_SB.PCI0) + { + #include + #include + } + + #include + + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/purism/librem_whl/ramstage.c b/src/mainboard/purism/librem_whl/ramstage.c new file mode 100644 index 0000000000..07ede66505 --- /dev/null +++ b/src/mainboard/purism/librem_whl/ramstage.c @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +void mainboard_silicon_init_params(FSP_S_CONFIG *params) +{ + /* Configure pads prior to SiliconInit() in case there's any + * dependencies during hardware initialization. */ + size_t num_gpios; + const struct pad_config *gpio_table = variant_gpio_table(&num_gpios); + cnl_configure_pads(gpio_table, num_gpios); + + /* Limit SATA speed to 3Gbps until correct HSIO PHY settings determined */ + params->SataSpeedLimit = 2; +} diff --git a/src/mainboard/purism/librem_whl/romstage.c b/src/mainboard/purism/librem_whl/romstage.c new file mode 100644 index 0000000000..9f8d600950 --- /dev/null +++ b/src/mainboard/purism/librem_whl/romstage.c @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +static const struct cnl_mb_cfg memcfg = { + + /* Parameters required to access SPD for CH0D0/CH0D1/CH1D0/CH1D1. */ + .spd[0] = { + .read_type = READ_SMBUS, + .spd_spec = {.spd_smbus_address = 0xa0}, + }, + .spd[1] = {.read_type = NOT_EXISTING}, + .spd[2] = { + .read_type = READ_SMBUS, + .spd_spec = {.spd_smbus_address = 0xa4}, + }, + .spd[3] = {.read_type = NOT_EXISTING}, + + /* + * Rcomp resistor values. These values represent the resistance in + * ohms of the three rcomp resistors attached to the DDR_COMP_0, + * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM. + */ + .rcomp_resistor = { 121, 81, 100 }, + + /* Rcomp target values */ + .rcomp_targets = { 100, 40, 20, 20, 26 }, + + /* + * Indicates whether memory is interleaved. + * Set to 1 for an interleaved design, + * set to 0 for non-interleaved design. + */ + .dq_pins_interleaved = 1, + + /* + * VREF_CA configuration. + * Set to 0 VREF_CA goes to both CH_A and CH_B, + * set to 1 VREF_CA goes to CH_A and VREF_DQ_A goes to CH_B, + * set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B. + */ + .vref_ca_config = 2, + + /* Early Command Training */ + .ect = 0, +}; + +void mainboard_memory_init_params(FSPM_UPD *memupd) +{ + cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg); +} diff --git a/src/mainboard/purism/librem_whl/variants/librem_mini/data.vbt b/src/mainboard/purism/librem_whl/variants/librem_mini/data.vbt new file mode 100644 index 0000000000..2e657d1a9f Binary files /dev/null and b/src/mainboard/purism/librem_whl/variants/librem_mini/data.vbt differ diff --git a/src/mainboard/purism/librem_whl/variants/librem_mini/gpio.c b/src/mainboard/purism/librem_whl/variants/librem_mini/gpio.c new file mode 100644 index 0000000000..492d978d45 --- /dev/null +++ b/src/mainboard/purism/librem_whl/variants/librem_mini/gpio.c @@ -0,0 +1,229 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { + + /* ------- GPIO Group GPP_A ------- */ + + _PAD_CFG_STRUCT(GPP_A0, 0x44000702, 0x0000), /* RCIN# */ + _PAD_CFG_STRUCT(GPP_A1, 0x44000702, 0x3c00), /* LAD0 */ + _PAD_CFG_STRUCT(GPP_A2, 0x44000702, 0x3c00), /* LAD1 */ + _PAD_CFG_STRUCT(GPP_A3, 0x44000702, 0x3c00), /* LAD2 */ + _PAD_CFG_STRUCT(GPP_A4, 0x44000702, 0x3c00), /* LAD3 */ + _PAD_CFG_STRUCT(GPP_A5, 0x44000700, 0x0000), /* LFRAME# */ + _PAD_CFG_STRUCT(GPP_A6, 0x44000700, 0x0000), /* SERIRQ */ + _PAD_CFG_STRUCT(GPP_A7, 0x84000200, 0x0000), /* PIRQA# */ + _PAD_CFG_STRUCT(GPP_A8, 0x44000700, 0x0000), /* CLKRUN# */ + _PAD_CFG_STRUCT(GPP_A9, 0x44000700, 0x1000), /* CLKOUT_LPC0 */ + _PAD_CFG_STRUCT(GPP_A10, 0x44000700, 0x1000), /* CLKOUT_LPC1 */ + _PAD_CFG_STRUCT(GPP_A11, 0x40880201, 0x0000), /* PME# */ + _PAD_CFG_STRUCT(GPP_A12, 0x84000201, 0x0000), /* BM_BUSY# */ + _PAD_CFG_STRUCT(GPP_A13, 0x84000201, 0x0000), /* SUSWARN#/SUSPWRDNACK*/ + _PAD_CFG_STRUCT(GPP_A14, 0x44000700, 0x0000), /* SUS_STAT# */ + _PAD_CFG_STRUCT(GPP_A15, 0x84000201, 0x0000), /* SUSACK# */ + _PAD_CFG_STRUCT(GPP_A16, 0x84000200, 0x3000), /* SD_1P8_SEL */ + _PAD_CFG_STRUCT(GPP_A17, 0x84000201, 0x0000), /* SD_VDD1_PWR_EN# */ + _PAD_CFG_STRUCT(GPP_A18, 0x44000300, 0x3000), /* ISH_GP0 */ + _PAD_CFG_STRUCT(GPP_A19, 0x44000300, 0x3000), /* ISH_GP1 */ + _PAD_CFG_STRUCT(GPP_A20, 0x44000300, 0x3000), /* ISH_GP2 */ + _PAD_CFG_STRUCT(GPP_A21, 0x44000300, 0x3000), /* ISH_GP3 */ + _PAD_CFG_STRUCT(GPP_A22, 0x44000300, 0x3000), /* ISH_GP4 */ + _PAD_CFG_STRUCT(GPP_A23, 0x44000300, 0x3000), /* ISH_GP5 */ + + /* ------- GPIO Group GPP_B ------- */ + + _PAD_CFG_STRUCT(GPP_B0, 0x84000700, 0x0000), /* Reserved */ + _PAD_CFG_STRUCT(GPP_B1, 0x84000700, 0x0000), /* Reserved */ + _PAD_CFG_STRUCT(GPP_B2, 0x84000201, 0x0000), /* VRALERT# */ + _PAD_CFG_STRUCT(GPP_B3, 0x84000201, 0x0000), /* CPU_GP2 */ + _PAD_CFG_STRUCT(GPP_B4, 0x84000201, 0x0000), /* CPU_GP3 */ + _PAD_CFG_STRUCT(GPP_B5, 0x44000300, 0x0000), /* SRCCLKREQ0# */ + _PAD_CFG_STRUCT(GPP_B6, 0x44000300, 0x0000), /* SRCCLKREQ1# */ + _PAD_CFG_STRUCT(GPP_B7, 0x44000300, 0x0000), /* SRCCLKREQ2# */ + _PAD_CFG_STRUCT(GPP_B8, 0x44000300, 0x0000), /* SRCCLKREQ3# */ + _PAD_CFG_STRUCT(GPP_B9, 0x44000300, 0x0000), /* SRCCLKREQ4# */ + _PAD_CFG_STRUCT(GPP_B10, 0x44000300, 0x0000), /* SRCCLKREQ5# */ + _PAD_CFG_STRUCT(GPP_B11, 0x84000201, 0x0000), /* EXT_PWR_GATE# */ + _PAD_CFG_STRUCT(GPP_B12, 0x44000700, 0x0000), /* SLP_S0# */ + _PAD_CFG_STRUCT(GPP_B13, 0x44000700, 0x0000), /* PLTRST# */ + _PAD_CFG_STRUCT(GPP_B14, 0x84000201, 0x0000), /* SPKR */ + _PAD_CFG_STRUCT(GPP_B15, 0x80000701, 0x0000), /* GSPI0_CS0# */ + _PAD_CFG_STRUCT(GPP_B16, 0x84000601, 0x0000), /* GSPI0_CLK */ + _PAD_CFG_STRUCT(GPP_B17, 0x44000502, 0x0000), /* GSPI0_MISO */ + _PAD_CFG_STRUCT(GPP_B18, 0x84000601, 0x0000), /* GSPI0_MOSI */ + _PAD_CFG_STRUCT(GPP_B19, 0x84000400, 0x0000), /* GSPI1_CS0# */ + _PAD_CFG_STRUCT(GPP_B20, 0x84000400, 0x0000), /* GSPI1_CLK */ + _PAD_CFG_STRUCT(GPP_B21, 0x84000402, 0x0000), /* GSPI1_MISO */ + _PAD_CFG_STRUCT(GPP_B22, 0x84000400, 0x0000), /* GSPI1_MOSI */ + _PAD_CFG_STRUCT(GPP_B23, 0x44000201, 0x0000), /* SML1ALERT# */ + + /* ------- GPIO Group GPP_G ------- */ + + _PAD_CFG_STRUCT(GPP_G0, 0x84000200, 0x0000), /* SD_CMD */ + _PAD_CFG_STRUCT(GPP_G1, 0x84000300, 0x0000), /* SD_DATA0 */ + _PAD_CFG_STRUCT(GPP_G2, 0x84000300, 0x0000), /* SD_DATA1 */ + _PAD_CFG_STRUCT(GPP_G3, 0x84000300, 0x0000), /* SD_DATA2 */ + _PAD_CFG_STRUCT(GPP_G4, 0x84000300, 0x0000), /* SD_DATA3 */ + _PAD_CFG_STRUCT(GPP_G5, 0x84000300, 0x3000), /* SD3_CD# */ + _PAD_CFG_STRUCT(GPP_G6, 0x84000300, 0x0000), /* SD3_CLK */ + _PAD_CFG_STRUCT(GPP_G7, 0x84000300, 0x1000), /* SD3_WP */ + + /* ------- GPIO Group GPP_D ------- */ + + _PAD_CFG_STRUCT(GPP_D0, 0x44000300, 0x0000), /* SPI1_CS# */ + _PAD_CFG_STRUCT(GPP_D1, 0x44000300, 0x0000), /* SPI1_CLK */ + _PAD_CFG_STRUCT(GPP_D2, 0x44000300, 0x0000), /* SPI1_MISO */ + _PAD_CFG_STRUCT(GPP_D3, 0x44000300, 0x0000), /* SPI1_MOSI */ + _PAD_CFG_STRUCT(GPP_D4, 0x44000300, 0x0000), /* IMGCLKOUT0 */ + _PAD_CFG_STRUCT(GPP_D5, 0x44000700, 0x0000), /* ISH_I2C0_SDA */ + _PAD_CFG_STRUCT(GPP_D6, 0x44000700, 0x0000), /* ISH_I2C0_SCL */ + _PAD_CFG_STRUCT(GPP_D7, 0x84000201, 0x0000), /* ISH_I2C1_SDA */ + _PAD_CFG_STRUCT(GPP_D8, 0x84000200, 0x0000), /* ISH_I2C1_SCL */ + _PAD_CFG_STRUCT(GPP_D9, 0x84000201, 0x0000), /* ISH_SPI_CS# */ + _PAD_CFG_STRUCT(GPP_D10, 0x84000201, 0x0000), /* ISH_SPI_CLK */ + _PAD_CFG_STRUCT(GPP_D11, 0x44000201, 0x3000), /* ISH_SPI_MISO */ + _PAD_CFG_STRUCT(GPP_D12, 0x42100102, 0x3000), /* ISH_SPI_MOSI */ + _PAD_CFG_STRUCT(GPP_D13, 0x44000201, 0x0000), /* ISH_UART0_RXD */ + _PAD_CFG_STRUCT(GPP_D14, 0x84000201, 0x0000), /* ISH_UART0_TXD */ + _PAD_CFG_STRUCT(GPP_D15, 0x84000201, 0x0000), /* ISH_UART0_RTS# */ + _PAD_CFG_STRUCT(GPP_D16, 0x44000200, 0x0000), /* ISH_UART0_CTS# */ + _PAD_CFG_STRUCT(GPP_D17, 0x44000700, 0x0000), /* DMIC_CLK1 */ + _PAD_CFG_STRUCT(GPP_D18, 0x44000700, 0x0000), /* DMIC_DATA1 */ + _PAD_CFG_STRUCT(GPP_D19, 0x44000700, 0x0000), /* DMIC_CLK0 */ + _PAD_CFG_STRUCT(GPP_D20, 0x44000700, 0x0000), /* DMIC_DATA0 */ + _PAD_CFG_STRUCT(GPP_D21, 0x44000300, 0x0000), /* SPI1_IO2 */ + _PAD_CFG_STRUCT(GPP_D22, 0x44000300, 0x0000), /* SPI1_IO3 */ + _PAD_CFG_STRUCT(GPP_D23, 0x44000300, 0x0000), /* I2S_MCLK */ + + /* ------- GPIO Group GPP_F ------- */ + + _PAD_CFG_STRUCT(GPP_F0, 0x84000301, 0x0000), /* CNV_PA_BLANKING */ + _PAD_CFG_STRUCT(GPP_F1, 0x84000200, 0x0000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_F2, 0x84000201, 0x3000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_F3, 0x84000200, 0x3000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_F4, 0x44000700, 0x3000), /* CNV_BRI_DT */ + _PAD_CFG_STRUCT(GPP_F5, 0x44000702, 0x3000), /* CNV_BRI_RSP */ + _PAD_CFG_STRUCT(GPP_F6, 0x44000700, 0x3000), /* CNV_RGI_DT */ + _PAD_CFG_STRUCT(GPP_F7, 0x44000702, 0x3000), /* CNV_RGI_RSP */ + _PAD_CFG_STRUCT(GPP_F8, 0x44000300, 0x0000), /* CNV_MFUART2_RXD */ + _PAD_CFG_STRUCT(GPP_F9, 0x44000300, 0x0000), /* CNV_MFUART2_TXD */ + _PAD_CFG_STRUCT(GPP_F10, 0x84000201, 0x0000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_F11, 0x44000300, 0x0000), /* EMMC_CMD */ + _PAD_CFG_STRUCT(GPP_F12, 0x44000300, 0x0000), /* EMMC_DATA0 */ + _PAD_CFG_STRUCT(GPP_F13, 0x44000300, 0x0000), /* EMMC_DATA1 */ + _PAD_CFG_STRUCT(GPP_F14, 0x44000300, 0x0000), /* EMMC_DATA2 */ + _PAD_CFG_STRUCT(GPP_F15, 0x44000300, 0x0000), /* EMMC_DATA3 */ + _PAD_CFG_STRUCT(GPP_F16, 0x44000300, 0x0000), /* EMMC_DATA4 */ + _PAD_CFG_STRUCT(GPP_F17, 0x44000300, 0x0000), /* EMMC_DATA5 */ + _PAD_CFG_STRUCT(GPP_F18, 0x44000300, 0x0000), /* EMMC_DATA6 */ + _PAD_CFG_STRUCT(GPP_F19, 0x44000300, 0x0000), /* EMMC_DATA7 */ + _PAD_CFG_STRUCT(GPP_F20, 0x44000300, 0x0000), /* EMMC_RCLK */ + _PAD_CFG_STRUCT(GPP_F21, 0x44000300, 0x0000), /* EMMC_CLK */ + _PAD_CFG_STRUCT(GPP_F22, 0x44000300, 0x0000), /* EMMC_RESET# */ + _PAD_CFG_STRUCT(GPP_F23, 0x44000700, 0x1000), /* A4WP_PRESENT */ + + /* ------- GPIO Group GPP_H ------- */ + + _PAD_CFG_STRUCT(GPP_H0, 0x44000300, 0x3000), /* I2S2_SCLK */ + _PAD_CFG_STRUCT(GPP_H1, 0x44000f00, 0x3000), /* CNV_RF_RESET# */ + _PAD_CFG_STRUCT(GPP_H2, 0x84000f00, 0x3000), /* MODEM_CLKREQ */ + _PAD_CFG_STRUCT(GPP_H3, 0x84000300, 0x3000), /* I2S2_RXD */ + _PAD_CFG_STRUCT(GPP_H4, 0x84000300, 0x0000), /* I2C2_SDA */ + _PAD_CFG_STRUCT(GPP_H5, 0x84000300, 0x0000), /* I2C2_SCL */ + _PAD_CFG_STRUCT(GPP_H6, 0x84000702, 0x0000), /* I2C3_SDA */ + _PAD_CFG_STRUCT(GPP_H7, 0x84000702, 0x0000), /* I2C3_SCL */ + _PAD_CFG_STRUCT(GPP_H8, 0x84000702, 0x0000), /* I2C4_SDA */ + _PAD_CFG_STRUCT(GPP_H9, 0x84000702, 0x0000), /* I2C4_SCL */ + _PAD_CFG_STRUCT(GPP_H10, 0x84000603, 0x0000), /* I2C5_SDA */ + _PAD_CFG_STRUCT(GPP_H11, 0x84000603, 0x0000), /* I2C5_SCL */ + _PAD_CFG_STRUCT(GPP_H12, 0x84000201, 0x0000), /* M2_SKT2_CFG0 */ + _PAD_CFG_STRUCT(GPP_H13, 0x84000201, 0x0000), /* M2_SKT2_CFG1 */ + _PAD_CFG_STRUCT(GPP_H14, 0x84000200, 0x0000), /* M2_SKT2_CFG2 */ + _PAD_CFG_STRUCT(GPP_H15, 0x84000201, 0x0000), /* M2_SKT2_CFG3 */ + _PAD_CFG_STRUCT(GPP_H16, 0x84000201, 0x0000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_H17, 0x84000201, 0x0000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_H18, 0x84000700, 0x0000), /* CPU_C10_GATE# */ + _PAD_CFG_STRUCT(GPP_H19, 0x84000201, 0x0000), /* TIME_SYNC0 */ + _PAD_CFG_STRUCT(GPP_H20, 0x84000300, 0x0000), /* IMGCLKOUT1 */ + _PAD_CFG_STRUCT(GPP_H21, 0x84000200, 0x0000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_H22, 0x84000201, 0x0000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_H23, 0x84000200, 0x0000), /* GPIO */ + + /* ------- GPIO Group GPD ------- */ + + _PAD_CFG_STRUCT(GPD0, 0x44000702, 0x0000), /* BATLOW# */ + _PAD_CFG_STRUCT(GPD1, 0x44000702, 0x3c00), /* ACPRESENT */ + _PAD_CFG_STRUCT(GPD2, 0x44000702, 0x3c00), /* LAN_WAKE# */ + _PAD_CFG_STRUCT(GPD3, 0x44000702, 0x3000), /* PRWBTN# */ + _PAD_CFG_STRUCT(GPD4, 0x44000600, 0x0000), /* SLP_S3# */ + _PAD_CFG_STRUCT(GPD5, 0x44000600, 0x0000), /* SLP_S4# */ + _PAD_CFG_STRUCT(GPD6, 0x44000600, 0x0000), /* SLP_A# */ + _PAD_CFG_STRUCT(GPD7, 0x44000200, 0x0000), /* GPIO */ + _PAD_CFG_STRUCT(GPD8, 0x44000700, 0x0000), /* SUSCLK */ + _PAD_CFG_STRUCT(GPD9, 0x44000700, 0x0000), /* SLP_WLAN# */ + _PAD_CFG_STRUCT(GPD10, 0x44000600, 0x0000), /* SLP_S5# */ + _PAD_CFG_STRUCT(GPD11, 0x44000600, 0x0000), /* LANPHYPC */ + + /* ------- GPIO Group GPP_C ------- */ + + _PAD_CFG_STRUCT(GPP_C0, 0x44000702, 0x0000), /* SMBCLK */ + _PAD_CFG_STRUCT(GPP_C1, 0x44000702, 0x0000), /* SMBDATA */ + _PAD_CFG_STRUCT(GPP_C2, 0x44000201, 0x0000), /* SMBALERT# */ + _PAD_CFG_STRUCT(GPP_C3, 0x44000702, 0x0000), /* SML0CLK */ + _PAD_CFG_STRUCT(GPP_C4, 0x44000702, 0x0000), /* SML0DATA */ + _PAD_CFG_STRUCT(GPP_C5, 0x84000201, 0x0000), /* SML0ALERT# */ + _PAD_CFG_STRUCT(GPP_C6, 0x44000300, 0x0000), /* SML1CLK */ + _PAD_CFG_STRUCT(GPP_C7, 0x44000300, 0x0000), /* SML1DATA */ + _PAD_CFG_STRUCT(GPP_C8, 0x84000201, 0x0000), /* UART0_RXD */ + _PAD_CFG_STRUCT(GPP_C9, 0x84000201, 0x0000), /* UART0_TXD */ + _PAD_CFG_STRUCT(GPP_C10, 0x84000200, 0x0000), /* UART0_RTS# */ + _PAD_CFG_STRUCT(GPP_C11, 0x84000201, 0x0000), /* UART0_CTS# */ + _PAD_CFG_STRUCT(GPP_C12, 0x84000603, 0x0000), /* UART1_RXD */ + _PAD_CFG_STRUCT(GPP_C13, 0x84000700, 0x0000), /* UART1_TXD */ + _PAD_CFG_STRUCT(GPP_C14, 0x84000700, 0x0000), /* UART1_RTS# */ + _PAD_CFG_STRUCT(GPP_C15, 0x84000702, 0x0000), /* UART1_CTS# */ + _PAD_CFG_STRUCT(GPP_C16, 0x84000402, 0x0000), /* I2C0_SDA */ + _PAD_CFG_STRUCT(GPP_C17, 0x84000402, 0x0000), /* I2C0_SCL */ + _PAD_CFG_STRUCT(GPP_C18, 0x44000702, 0x0000), /* I2C1_SDA */ + _PAD_CFG_STRUCT(GPP_C19, 0x44000702, 0x0000), /* I2C1_SCL */ + _PAD_CFG_STRUCT(GPP_C20, 0x44000300, 0x0000), /* UART2_RXD */ + _PAD_CFG_STRUCT(GPP_C21, 0x44000300, 0x0000), /* UART2_TXD */ + _PAD_CFG_STRUCT(GPP_C22, 0x84000201, 0x0000), /* UART2_RTS# */ + _PAD_CFG_STRUCT(GPP_C23, 0x40100102, 0x1000), /* UART2_CTS# */ + + /* ------- GPIO Group GPP_E ------- */ + + _PAD_CFG_STRUCT(GPP_E0, 0x84000300, 0x0000), /* SATAXPCIE0 */ + _PAD_CFG_STRUCT(GPP_E1, 0x84000300, 0x0000), /* SATAXPCIE1 */ + _PAD_CFG_STRUCT(GPP_E2, 0x84000502, 0x3000), /* SATAXPCIE2 */ + _PAD_CFG_STRUCT(GPP_E3, 0x82040102, 0x0000), /* CPU_GP0 */ + _PAD_CFG_STRUCT(GPP_E4, 0x84000201, 0x0000), /* SATA_DEVSLP0 */ + _PAD_CFG_STRUCT(GPP_E5, 0x84000300, 0x0000), /* SATA_DEVSLP1 */ + _PAD_CFG_STRUCT(GPP_E6, 0x84000300, 0x0000), /* SATA_DEVSLP2 */ + _PAD_CFG_STRUCT(GPP_E7, 0x82000102, 0x0000), /* CPU_GP1 */ + _PAD_CFG_STRUCT(GPP_E8, 0x84000700, 0x0000), /* SATALED# */ + _PAD_CFG_STRUCT(GPP_E9, 0x44001700, 0x0000), /* USB2_OC0# */ + _PAD_CFG_STRUCT(GPP_E10, 0x44001700, 0x0000), /* USB2_OC1# */ + _PAD_CFG_STRUCT(GPP_E11, 0x44000702, 0x0000), /* USB2_OC2# */ + _PAD_CFG_STRUCT(GPP_E12, 0x44000702, 0x0000), /* USB2_OC3# */ + _PAD_CFG_STRUCT(GPP_E13, 0x84000700, 0x0000), /* DDPB_HPD0 */ + _PAD_CFG_STRUCT(GPP_E14, 0x84000702, 0x0000), /* DDPC_HPD1 */ + _PAD_CFG_STRUCT(GPP_E15, 0x84000201, 0x0000), /* DDPD_HPD2 */ + _PAD_CFG_STRUCT(GPP_E16, 0x80880102, 0x3000), /* GPIO */ + _PAD_CFG_STRUCT(GPP_E17, 0x84000700, 0x0000), /* EDP_HPD */ + _PAD_CFG_STRUCT(GPP_E18, 0x84000702, 0x0000), /* DPPB_CTRLCLK */ + _PAD_CFG_STRUCT(GPP_E19, 0x84000602, 0x0000), /* DPPB_CTRLDATA */ + _PAD_CFG_STRUCT(GPP_E20, 0x84000700, 0x0000), /* DPPC_CTRLCLK */ + _PAD_CFG_STRUCT(GPP_E21, 0x84000602, 0x0000), /* DPPC_CTRLDATA */ + _PAD_CFG_STRUCT(GPP_E22, 0x84000702, 0x0000), /* DPPD_CTRLCLK */ + _PAD_CFG_STRUCT(GPP_E23, 0x84000602, 0x0000), /* DPPD_CTRLDATA */ + +}; + +const struct pad_config *variant_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} diff --git a/src/mainboard/purism/librem_whl/variants/librem_mini/hda_verb.c b/src/mainboard/purism/librem_whl/variants/librem_mini/hda_verb.c new file mode 100644 index 0000000000..c3daf3c5ed --- /dev/null +++ b/src/mainboard/purism/librem_whl/variants/librem_mini/hda_verb.c @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + 0x10ec0269, /* Codec Vendor/Device ID: Realtek ALC293 */ + 0x10ec0000, /* Subsystem ID */ + 11, /* Number of entries */ + + AZALIA_SUBVENDOR(0, 0x10ec0000), + AZALIA_PIN_CFG(0, 0x12, 0x40000000), + AZALIA_PIN_CFG(0, 0x15, 0x01214010), + AZALIA_PIN_CFG(0, 0x17, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x01a19130), + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x40422201), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), + + 0x8086280b, /* Codec Vendor/Device ID: Intel CannonPoint HDMI */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of entries */ + + AZALIA_SUBVENDOR(2, 0x80860101), + AZALIA_PIN_CFG(2, 0x05, 0x18560010), + AZALIA_PIN_CFG(2, 0x06, 0x18560020), + AZALIA_PIN_CFG(2, 0x07, 0x18560030), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/purism/librem_whl/variants/librem_mini/include/variant/gpio.h b/src/mainboard/purism/librem_whl/variants/librem_mini/include/variant/gpio.h new file mode 100644 index 0000000000..9094b0419d --- /dev/null +++ b/src/mainboard/purism/librem_whl/variants/librem_mini/include/variant/gpio.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include +#include + +const struct pad_config *variant_gpio_table(size_t *num); + +#endif