GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Revert "mainboard/lenovo/x230: Add ThinkPad x230s as a variant" 

This reverts commit 6b95507ec5, in order
to recommit and review it again.

Change-Id: Id4ddf99200f77016a48d02a8421d080cea492aae
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41504
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Bill XIE 2020-05-18 16:34:37 +08:00 committed by Alexander Couzens
parent 238b10a5f7
commit cfd78b1500
24 changed files with 100 additions and 512 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/mainboard/index.md
View File

@ -102,7 +102,6 @@ The boards in this section are not real mainboards, but emulators.
- [W530](lenovo/w530.md) - [W530](lenovo/w530.md)
- [T430 / T530 / X230 / W530 common](lenovo/Ivy_Bridge_series.md) - [T430 / T530 / X230 / W530 common](lenovo/Ivy_Bridge_series.md)
- [T431s](lenovo/t431s.md) - [T431s](lenovo/t431s.md)
- [X230s](lenovo/x230s.md)
- [Internal flashing](lenovo/ivb_internal_flashing.md) - [Internal flashing](lenovo/ivb_internal_flashing.md)
### Haswell series ### Haswell series

2
Documentation/mainboard/lenovo/Ivy_Bridge_series.md
View File

@ -1,6 +1,6 @@
# Lenovo Ivy Bridge series # Lenovo Ivy Bridge series
This information is valid for all supported models, except T430s, [T431s](t431s.md) and [X230s](x230s.md). This information is valid for all supported models, except T430s and T431s.
## Flashing coreboot ## Flashing coreboot
```eval_rst ```eval_rst

15
Documentation/mainboard/lenovo/x230s.md
View File

@ -1,15 +0,0 @@
# Lenovo X230s
## Disassembly Instructions
You must remove the following parts to access the SPI flash chip:
![x230s_bc_removed](x230s_bc_removed.jpg)
* Base cover
Its [Hardware Maintenance Manual](https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/x230s_hmm_en_0c10860_01.pdf) could be used as a guidance of disassembly.
The SPI flash chip (W25Q128.V in thr form of SOIC-8 for mine) is located at the circled place. Unlike [most Ivy Bridge ThinkPads](Ivy_Bridge_series.md), X230s has a single 16MiB SPI flash chip.
The general [flashing tutorial](../../flash_tutorial/index.md) has more details.

BIN
Documentation/mainboard/lenovo/x230s_bc_removed.jpg
View File

Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 42 KiB

24
src/mainboard/lenovo/x230/Kconfig
View File

@ -1,4 +1,4 @@
if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230S if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
config BOARD_SPECIFIC_OPTIONS config BOARD_SPECIFIC_OPTIONS
def_bool y def_bool y
@ -9,20 +9,18 @@ config BOARD_SPECIFIC_OPTIONS
select EC_LENOVO_PMH7 select EC_LENOVO_PMH7
select EC_LENOVO_H8 select EC_LENOVO_H8
select H8_HAS_BAT_TRESHOLDS_IMPL select H8_HAS_BAT_TRESHOLDS_IMPL
select H8_HAS_PRIMARY_FN_KEYS if BOARD_LENOVO_X230S
select NO_UART_ON_SUPERIO select NO_UART_ON_SUPERIO
select BOARD_ROMSIZE_KB_12288 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T select BOARD_ROMSIZE_KB_12288
select BOARD_ROMSIZE_KB_16384 if BOARD_LENOVO_X230S
select HAVE_ACPI_TABLES select HAVE_ACPI_TABLES
select HAVE_OPTION_TABLE select HAVE_OPTION_TABLE
select HAVE_CMOS_DEFAULT select HAVE_CMOS_DEFAULT
select HAVE_ACPI_RESUME select HAVE_ACPI_RESUME
select INTEL_INT15 select INTEL_INT15
select DRIVERS_RICOH_RCE822 select DRIVERS_RICOH_RCE822
select MAINBOARD_HAS_LPC_TPM if !BOARD_LENOVO_X230S select MAINBOARD_HAS_LPC_TPM
select MAINBOARD_HAS_TPM1 if !BOARD_LENOVO_X230S select MAINBOARD_HAS_TPM1
select MAINBOARD_HAS_LIBGFXINIT select MAINBOARD_HAS_LIBGFXINIT
select GFX_GMA_PANEL_1_ON_LVDS if !BOARD_LENOVO_X230S select GFX_GMA_PANEL_1_ON_LVDS
select INTEL_GMA_HAVE_VBT select INTEL_GMA_HAVE_VBT
select MAINBOARD_USES_IFD_GBE_REGION select MAINBOARD_USES_IFD_GBE_REGION
@ -52,20 +50,10 @@ config MAINBOARD_DIR
string string
default "lenovo/x230" default "lenovo/x230"
config VARIANT_DIR
string
default "x230" if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
default "x230s" if BOARD_LENOVO_X230S
config MAINBOARD_PART_NUMBER config MAINBOARD_PART_NUMBER
string string
default "ThinkPad X230" if BOARD_LENOVO_X230 default "ThinkPad X230" if BOARD_LENOVO_X230
default "ThinkPad X230t" if BOARD_LENOVO_X230T default "ThinkPad X230t" if BOARD_LENOVO_X230T
default "ThinkPad X230s" if BOARD_LENOVO_X230S
config OVERRIDE_DEVICETREE
string
default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config MAX_CPUS config MAX_CPUS
int int
@ -93,4 +81,4 @@ config PS2K_EISAID
config PS2M_EISAID config PS2M_EISAID
default "LEN0020" default "LEN0020"
endif # BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230S endif # BOARD_LENOVO_X230 || BOARD_LENOVO_X230T

3
src/mainboard/lenovo/x230/Kconfig.name
View File

@ -3,6 +3,3 @@ config BOARD_LENOVO_X230
config BOARD_LENOVO_X230T config BOARD_LENOVO_X230T
bool "ThinkPad X230t" bool "ThinkPad X230t"
config BOARD_LENOVO_X230S
bool "ThinkPad X230s"

12
src/mainboard/lenovo/x230/Makefile.inc
View File

@ -1,9 +1,9 @@
## SPDX-License-Identifier: GPL-2.0-only ## SPDX-License-Identifier: GPL-2.0-only
smm-y += smihandler.c smm-y += smihandler.c
bootblock-y += variants/$(VARIANT_DIR)/early_init.c bootblock-y += gpio.c
bootblock-y += variants/$(VARIANT_DIR)/gpio.c romstage-y += gpio.c
romstage-y += variants/$(VARIANT_DIR)/early_init.c
romstage-y += variants/$(VARIANT_DIR)/gpio.c ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c bootblock-y += early_init.c
ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/$(VARIANT_DIR)/gma-mainboard.ads romstage-y += early_init.c

1
src/mainboard/lenovo/x230/board_info.txt
View File

@ -1,5 +1,4 @@
Category: laptop Category: laptop
Board name: ThinkPad X230 baseboard
ROM package: SOIC-8 ROM package: SOIC-8
ROM protocol: SPI ROM protocol: SPI
ROM socketed: n ROM socketed: n

0
src/mainboard/lenovo/x230/variants/x230/data.vbt → src/mainboard/lenovo/x230/data.vbt
View File

8
src/mainboard/lenovo/x230/devicetree.cb
View File

@ -60,8 +60,7 @@ chip northbridge/intel/sandybridge
register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }" register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }"
# Wire port 4 (wwan usb) to ehci for it lacks superspeed components register "xhci_switchable_ports" = "0xf"
register "xhci_switchable_ports" = "0x7"
register "superspeed_capable_ports" = "0xf" register "superspeed_capable_ports" = "0xf"
register "xhci_overcurrent_mapping" = "0x4000201" register "xhci_overcurrent_mapping" = "0x4000201"
@ -90,7 +89,9 @@ chip northbridge/intel/sandybridge
end end
end # PCIe Port #1 end # PCIe Port #1
device pci 1c.1 on end # PCIe Port #2 device pci 1c.1 on end # PCIe Port #2
device pci 1c.2 off end # PCIe Port #3 device pci 1c.2 on
smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
end # PCIe Port #3 (expresscard)
device pci 1c.3 off end # PCIe Port #4 device pci 1c.3 off end # PCIe Port #4
device pci 1c.4 off end # PCIe Port #5 device pci 1c.4 off end # PCIe Port #5
device pci 1c.5 off end # PCIe Port #6 device pci 1c.5 off end # PCIe Port #6
@ -135,6 +136,7 @@ chip northbridge/intel/sandybridge
register "event7_enable" = "0x01" register "event7_enable" = "0x01"
register "event8_enable" = "0x7b" register "event8_enable" = "0x7b"
register "event9_enable" = "0xff" register "event9_enable" = "0xff"
register "eventa_enable" = "0x01"
register "eventb_enable" = "0x00" register "eventb_enable" = "0x00"
register "eventc_enable" = "0xff" register "eventc_enable" = "0xff"
register "eventd_enable" = "0xff" register "eventd_enable" = "0xff"

0
src/mainboard/lenovo/x230/variants/x230/early_init.c → src/mainboard/lenovo/x230/early_init.c
View File

0
src/mainboard/lenovo/x230/variants/x230/gma-mainboard.ads → src/mainboard/lenovo/x230/gma-mainboard.ads
View File

0
src/mainboard/lenovo/x230/variants/x230/gpio.c → src/mainboard/lenovo/x230/gpio.c
View File

83
src/mainboard/lenovo/x230/hda_verb.c
View File

@ -1 +1,82 @@
/* dummy */ /* SPDX-License-Identifier: GPL-2.0-only */
/* Bits 31:28 - Codec Address */
/* Bits 27:20 - NID */
/* Bits 19:8 - Verb ID */
/* Bits 7:0 - Payload */
#include <device/azalia_device.h>
const u32 cim_verb_data[] = {
/* --- Codec #0 --- */
0x10ec0269, /* Codec Vendor / Device ID: Realtek ALC269VC */
0x17aa21fa, /* Subsystem ID */
19, /* Number of 4 dword sets */
AZALIA_SUBVENDOR(0, 0x17aa21fa),
/* Ext. Microphone Connector: External,Right; MicIn,3.5mm; Black,JD; DA,Seq */
AZALIA_PIN_CFG(0, 0x0a, 0x04a11020),
/* Headphones Connector: External,Right; HP,3.5mm; Black,JD; DA,Seq */
AZALIA_PIN_CFG(0, 0x0b, 0x0421101f),
/* Not connected: N/A,N/A; Other,Unknown; Unknown,JD; DA,Seq */
AZALIA_PIN_CFG(0, 0x0c, 0x40f000f0),
/* Internal Speakers Fixed,Int; Speaker,Other Analog; Unknown,nJD; DA,Seq */
AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
/* Not connected */
AZALIA_PIN_CFG(0, 0x0f, 0x40f000f0),
/* Internal Microphone: Fixed,Int,Top; Mic In,ATIPI; Unknown,nJD; DA,Seq */
AZALIA_PIN_CFG(0, 0x11, 0xd5a30140),
AZALIA_PIN_CFG(0, 0x12, 0x90a60140),
AZALIA_PIN_CFG(0, 0x14, 0x90170110),
AZALIA_PIN_CFG(0, 0x15, 0x03211020),
AZALIA_PIN_CFG(0, 0x18, 0x03a11830),
AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1d, 0x40138205),
AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
/* Misc entries */
0x01970804,
0x01870803,
0x01470740,
0x00970640,
0x00370680,
0x00270680,
0x01470c02,
0x01570c02,
/* ALC coefficients. */
/* 08 */
0x02050008,
0x02040700,
/* 18 */
0x02050018,
0x02045184,
/* 1c */
0x0205001c,
0x02042800,
0x01870724, /* Enable Vrefout for mic */
0x00170500, /* Set power state to D0 */
/* --- Codec #3 --- */
0x80862806, /* Codec Vendor / Device ID: Intel PantherPoint HDMI */
0x80860101, /* Subsystem ID */
4, /* Number of 4 dword sets */
AZALIA_SUBVENDOR(3, 0x80860101),
AZALIA_PIN_CFG(3, 0x05, 0x18560010),
AZALIA_PIN_CFG(3, 0x06, 0x18560020),
AZALIA_PIN_CFG(3, 0x07, 0x18560030),
};
const u32 pc_beep_verbs[] = {
0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */
};
AZALIA_ARRAY_SIZES;

7
src/mainboard/lenovo/x230/variants/x230/board_info.txt
View File

@ -1,7 +0,0 @@
Category: laptop
Board name: ThinkPad X230
ROM package: SOIC-8
ROM protocol: SPI
ROM socketed: n
Flashrom support: n
Release year: 2012

82
src/mainboard/lenovo/x230/variants/x230/hda_verb.c
View File

@ -1,82 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/* Bits 31:28 - Codec Address */
/* Bits 27:20 - NID */
/* Bits 19:8 - Verb ID */
/* Bits 7:0 - Payload */
#include <device/azalia_device.h>
const u32 cim_verb_data[] = {
/* --- Codec #0 --- */
0x10ec0269, /* Codec Vendor / Device ID: Realtek ALC269VC */
0x17aa21fa, /* Subsystem ID */
19, /* Number of 4 dword sets */
AZALIA_SUBVENDOR(0, 0x17aa21fa),
/* Ext. Microphone Connector: External,Right; MicIn,3.5mm; Black,JD; DA,Seq */
AZALIA_PIN_CFG(0, 0x0a, 0x04a11020),
/* Headphones Connector: External,Right; HP,3.5mm; Black,JD; DA,Seq */
AZALIA_PIN_CFG(0, 0x0b, 0x0421101f),
/* Not connected: N/A,N/A; Other,Unknown; Unknown,JD; DA,Seq */
AZALIA_PIN_CFG(0, 0x0c, 0x40f000f0),
/* Internal Speakers Fixed,Int; Speaker,Other Analog; Unknown,nJD; DA,Seq */
AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
/* Not connected */
AZALIA_PIN_CFG(0, 0x0f, 0x40f000f0),
/* Internal Microphone: Fixed,Int,Top; Mic In,ATIPI; Unknown,nJD; DA,Seq */
AZALIA_PIN_CFG(0, 0x11, 0xd5a30140),
AZALIA_PIN_CFG(0, 0x12, 0x90a60140),
AZALIA_PIN_CFG(0, 0x14, 0x90170110),
AZALIA_PIN_CFG(0, 0x15, 0x03211020),
AZALIA_PIN_CFG(0, 0x18, 0x03a11830),
AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1d, 0x40138205),
AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
/* Misc entries */
0x01970804,
0x01870803,
0x01470740,
0x00970640,
0x00370680,
0x00270680,
0x01470c02,
0x01570c02,
/* ALC coefficients. */
/* 08 */
0x02050008,
0x02040700,
/* 18 */
0x02050018,
0x02045184,
/* 1c */
0x0205001c,
0x02042800,
0x01870724, /* Enable Vrefout for mic */
0x00170500, /* Set power state to D0 */
/* --- Codec #3 --- */
0x80862806, /* Codec Vendor / Device ID: Intel PantherPoint HDMI */
0x80860101, /* Subsystem ID */
4, /* Number of 4 dword sets */
AZALIA_SUBVENDOR(3, 0x80860101),
AZALIA_PIN_CFG(3, 0x05, 0x18560010),
AZALIA_PIN_CFG(3, 0x06, 0x18560020),
AZALIA_PIN_CFG(3, 0x07, 0x18560030),
};
const u32 pc_beep_verbs[] = {
0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */
};
AZALIA_ARRAY_SIZES;

15
src/mainboard/lenovo/x230/variants/x230/overridetree.cb
View File

@ -1,15 +0,0 @@
chip northbridge/intel/sandybridge
device domain 0x0 on
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
register "docking_supported" = "1"
device pci 1c.2 on
smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
end # PCIe Port #3 (expresscard)
device pci 1f.0 on # LPC bridge
chip ec/lenovo/h8
register "eventa_enable" = "0x01"
end
end # LPC Controller
end
end
end

7
src/mainboard/lenovo/x230/variants/x230s/board_info.txt
View File

@ -1,7 +0,0 @@
Category: laptop
Board name: ThinkPad X230s
ROM package: SOIC-8
ROM protocol: SPI
ROM socketed: n
Flashrom support: n
Release year: 2013

BIN
src/mainboard/lenovo/x230/variants/x230s/data.vbt
View File

Binary file not shown.

49
src/mainboard/lenovo/x230/variants/x230s/early_init.c
View File

@ -1,49 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/* FIXME: Check if all includes are needed. */
#include <stdint.h>
#include <string.h>
#include <timestamp.h>
#include <arch/byteorder.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <device/pnp_ops.h>
#include <console/console.h>
#include <bootblock_common.h>
#include <northbridge/intel/sandybridge/sandybridge.h>
#include <northbridge/intel/sandybridge/raminit_native.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/common/gpio.h>
const struct southbridge_usb_port mainboard_usb_ports[] = {
{ 1, 3, 0 },
{ 1, 3, 1 },
{ 0, 1, 3 },
{ 1, 3, -1 },
{ 0, 1, 2 },
{ 0, 1, -1 },
{ 0, 1, -1 },
{ 0, 1, -1 },
{ 0, 1, -1 },
{ 0, 1, 5 },
{ 1, 1, -1 },
{ 0, 1, -1 },
{ 1, 3, -1 },
{ 1, 1, -1 },
};
void bootblock_mainboard_early_init(void)
{
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f);
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
}
/* FIXME: Put proper SPD map here. */
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
{
read_spd(&spd[0], 0x50, id_only);
read_spd(&spd[1], 0x52, id_only);
read_spd(&spd[2], 0x51, id_only);
read_spd(&spd[3], 0x53, id_only);
}

22
src/mainboard/lenovo/x230/variants/x230s/gma-mainboard.ads
View File

@ -1,22 +0,0 @@
-- SPDX-License-Identifier: GPL-2.0-or-later
with HW.GFX.GMA;
with HW.GFX.GMA.Display_Probing;
use HW.GFX.GMA;
use HW.GFX.GMA.Display_Probing;
private package GMA.Mainboard is
ports : constant Port_List :=
(DP1,
DP2,
DP3,
HDMI1,
HDMI2,
HDMI3,
Analog,
EDP,
others => Disabled);
end GMA.Mainboard;

212
src/mainboard/lenovo/x230/variants/x230s/gpio.c
View File

@ -1,212 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <southbridge/intel/common/gpio.h>
static const struct pch_gpio_set1 pch_gpio_set1_mode = {
.gpio0 = GPIO_MODE_GPIO,
.gpio1 = GPIO_MODE_GPIO,
.gpio2 = GPIO_MODE_GPIO,
.gpio3 = GPIO_MODE_GPIO,
.gpio4 = GPIO_MODE_GPIO,
.gpio5 = GPIO_MODE_GPIO,
.gpio6 = GPIO_MODE_GPIO,
.gpio7 = GPIO_MODE_GPIO,
.gpio8 = GPIO_MODE_GPIO,
.gpio9 = GPIO_MODE_NATIVE,
.gpio10 = GPIO_MODE_GPIO,
.gpio11 = GPIO_MODE_NATIVE,
.gpio12 = GPIO_MODE_NATIVE,
.gpio13 = GPIO_MODE_GPIO,
.gpio14 = GPIO_MODE_NATIVE,
.gpio15 = GPIO_MODE_GPIO,
.gpio16 = GPIO_MODE_GPIO,
.gpio17 = GPIO_MODE_GPIO,
.gpio18 = GPIO_MODE_NATIVE,
.gpio19 = GPIO_MODE_GPIO,
.gpio20 = GPIO_MODE_NATIVE,
.gpio21 = GPIO_MODE_GPIO,
.gpio22 = GPIO_MODE_GPIO,
.gpio23 = GPIO_MODE_NATIVE,
.gpio24 = GPIO_MODE_GPIO,
.gpio25 = GPIO_MODE_NATIVE,
.gpio26 = GPIO_MODE_GPIO,
.gpio27 = GPIO_MODE_GPIO,
.gpio28 = GPIO_MODE_GPIO,
.gpio29 = GPIO_MODE_GPIO,
.gpio30 = GPIO_MODE_NATIVE,
.gpio31 = GPIO_MODE_NATIVE,
};
static const struct pch_gpio_set1 pch_gpio_set1_direction = {
.gpio0 = GPIO_DIR_INPUT,
.gpio1 = GPIO_DIR_INPUT,
.gpio2 = GPIO_DIR_INPUT,
.gpio3 = GPIO_DIR_INPUT,
.gpio4 = GPIO_DIR_INPUT,
.gpio5 = GPIO_DIR_INPUT,
.gpio6 = GPIO_DIR_INPUT,
.gpio7 = GPIO_DIR_INPUT,
.gpio8 = GPIO_DIR_OUTPUT,
.gpio10 = GPIO_DIR_OUTPUT,
.gpio13 = GPIO_DIR_INPUT,
.gpio15 = GPIO_DIR_OUTPUT,
.gpio16 = GPIO_DIR_INPUT,
.gpio17 = GPIO_DIR_INPUT,
.gpio19 = GPIO_DIR_INPUT,
.gpio21 = GPIO_DIR_INPUT,
.gpio22 = GPIO_DIR_OUTPUT,
.gpio24 = GPIO_DIR_OUTPUT,
.gpio26 = GPIO_DIR_INPUT,
.gpio27 = GPIO_DIR_INPUT,
.gpio28 = GPIO_DIR_OUTPUT,
.gpio29 = GPIO_DIR_OUTPUT,
};
static const struct pch_gpio_set1 pch_gpio_set1_level = {
.gpio8 = GPIO_LEVEL_LOW,
.gpio10 = GPIO_LEVEL_HIGH,
.gpio15 = GPIO_LEVEL_LOW,
.gpio22 = GPIO_LEVEL_HIGH,
.gpio24 = GPIO_LEVEL_LOW,
.gpio28 = GPIO_LEVEL_LOW,
.gpio29 = GPIO_LEVEL_HIGH,
};
static const struct pch_gpio_set1 pch_gpio_set1_reset = {
.gpio24 = GPIO_RESET_RSMRST,
};
static const struct pch_gpio_set1 pch_gpio_set1_invert = {
.gpio1 = GPIO_INVERT,
.gpio6 = GPIO_INVERT,
.gpio13 = GPIO_INVERT,
};
static const struct pch_gpio_set1 pch_gpio_set1_blink = {
};
static const struct pch_gpio_set2 pch_gpio_set2_mode = {
.gpio32 = GPIO_MODE_NATIVE,
.gpio33 = GPIO_MODE_GPIO,
.gpio34 = GPIO_MODE_GPIO,
.gpio35 = GPIO_MODE_GPIO,
.gpio36 = GPIO_MODE_GPIO,
.gpio37 = GPIO_MODE_GPIO,
.gpio38 = GPIO_MODE_GPIO,
.gpio39 = GPIO_MODE_GPIO,
.gpio40 = GPIO_MODE_NATIVE,
.gpio41 = GPIO_MODE_NATIVE,
.gpio42 = GPIO_MODE_NATIVE,
.gpio43 = GPIO_MODE_GPIO,
.gpio44 = GPIO_MODE_GPIO,
.gpio45 = GPIO_MODE_GPIO,
.gpio46 = GPIO_MODE_NATIVE,
.gpio47 = GPIO_MODE_GPIO,
.gpio48 = GPIO_MODE_GPIO,
.gpio49 = GPIO_MODE_GPIO,
.gpio50 = GPIO_MODE_GPIO,
.gpio51 = GPIO_MODE_GPIO,
.gpio52 = GPIO_MODE_GPIO,
.gpio53 = GPIO_MODE_GPIO,
.gpio54 = GPIO_MODE_GPIO,
.gpio55 = GPIO_MODE_GPIO,
.gpio56 = GPIO_MODE_GPIO,
.gpio57 = GPIO_MODE_GPIO,
.gpio58 = GPIO_MODE_NATIVE,
.gpio59 = GPIO_MODE_NATIVE,
.gpio60 = GPIO_MODE_NATIVE,
.gpio61 = GPIO_MODE_NATIVE,
.gpio62 = GPIO_MODE_NATIVE,
.gpio63 = GPIO_MODE_NATIVE,
};
static const struct pch_gpio_set2 pch_gpio_set2_direction = {
.gpio33 = GPIO_DIR_OUTPUT,
.gpio34 = GPIO_DIR_INPUT,
.gpio35 = GPIO_DIR_INPUT,
.gpio36 = GPIO_DIR_INPUT,
.gpio37 = GPIO_DIR_INPUT,
.gpio38 = GPIO_DIR_INPUT,
.gpio39 = GPIO_DIR_INPUT,
.gpio43 = GPIO_DIR_OUTPUT,
.gpio44 = GPIO_DIR_INPUT,
.gpio45 = GPIO_DIR_INPUT,
.gpio47 = GPIO_DIR_INPUT,
.gpio48 = GPIO_DIR_INPUT,
.gpio49 = GPIO_DIR_INPUT,
.gpio50 = GPIO_DIR_INPUT,
.gpio51 = GPIO_DIR_OUTPUT,
.gpio52 = GPIO_DIR_OUTPUT,
.gpio53 = GPIO_DIR_OUTPUT,
.gpio54 = GPIO_DIR_INPUT,
.gpio55 = GPIO_DIR_OUTPUT,
.gpio56 = GPIO_DIR_INPUT,
.gpio57 = GPIO_DIR_INPUT,
};
static const struct pch_gpio_set2 pch_gpio_set2_level = {
.gpio33 = GPIO_LEVEL_HIGH,
.gpio43 = GPIO_LEVEL_HIGH,
.gpio51 = GPIO_LEVEL_HIGH,
.gpio52 = GPIO_LEVEL_HIGH,
.gpio53 = GPIO_LEVEL_HIGH,
.gpio55 = GPIO_LEVEL_HIGH,
};
static const struct pch_gpio_set2 pch_gpio_set2_reset = {
};
static const struct pch_gpio_set3 pch_gpio_set3_mode = {
.gpio64 = GPIO_MODE_GPIO,
.gpio65 = GPIO_MODE_GPIO,
.gpio66 = GPIO_MODE_GPIO,
.gpio67 = GPIO_MODE_GPIO,
.gpio68 = GPIO_MODE_GPIO,
.gpio69 = GPIO_MODE_GPIO,
.gpio70 = GPIO_MODE_GPIO,
.gpio71 = GPIO_MODE_GPIO,
.gpio72 = GPIO_MODE_NATIVE,
.gpio73 = GPIO_MODE_NATIVE,
.gpio74 = GPIO_MODE_NATIVE,
.gpio75 = GPIO_MODE_NATIVE,
};
static const struct pch_gpio_set3 pch_gpio_set3_direction = {
.gpio64 = GPIO_DIR_INPUT,
.gpio65 = GPIO_DIR_INPUT,
.gpio66 = GPIO_DIR_INPUT,
.gpio67 = GPIO_DIR_INPUT,
.gpio68 = GPIO_DIR_INPUT,
.gpio69 = GPIO_DIR_INPUT,
.gpio70 = GPIO_DIR_INPUT,
.gpio71 = GPIO_DIR_INPUT,
};
static const struct pch_gpio_set3 pch_gpio_set3_level = {
};
static const struct pch_gpio_set3 pch_gpio_set3_reset = {
};
const struct pch_gpio_map mainboard_gpio_map = {
.set1 = {
.mode = &pch_gpio_set1_mode,
.direction = &pch_gpio_set1_direction,
.level = &pch_gpio_set1_level,
.blink = &pch_gpio_set1_blink,
.invert = &pch_gpio_set1_invert,
.reset = &pch_gpio_set1_reset,
},
.set2 = {
.mode = &pch_gpio_set2_mode,
.direction = &pch_gpio_set2_direction,
.level = &pch_gpio_set2_level,
.reset = &pch_gpio_set2_reset,
},
.set3 = {
.mode = &pch_gpio_set3_mode,
.direction = &pch_gpio_set3_direction,
.level = &pch_gpio_set3_level,
.reset = &pch_gpio_set3_reset,
},
};

33
src/mainboard/lenovo/x230/variants/x230s/hda_verb.c
View File

@ -1,33 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/azalia_device.h>
const u32 cim_verb_data[] = {
0x10ec0269, /* Codec Vendor / Device ID: Realtek */
0x17aa2209, /* Subsystem ID */
11, /* Number of 4 dword sets */
AZALIA_SUBVENDOR(0, 0x17aa2209),
AZALIA_PIN_CFG(0, 0x12, 0x90a60140),
AZALIA_PIN_CFG(0, 0x14, 0x90170110),
AZALIA_PIN_CFG(0, 0x15, 0x03211020),
AZALIA_PIN_CFG(0, 0x17, 0x40008000),
AZALIA_PIN_CFG(0, 0x18, 0x03a11030),
AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1b, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1d, 0x40f38205),
AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
0x80862806, /* Codec Vendor / Device ID: Intel */
0x80860101, /* Subsystem ID */
4, /* Number of 4 dword sets */
AZALIA_SUBVENDOR(3, 0x80860101),
AZALIA_PIN_CFG(3, 0x05, 0x18560010),
AZALIA_PIN_CFG(3, 0x06, 0x58560020),
AZALIA_PIN_CFG(3, 0x07, 0x58560030),
};
const u32 pc_beep_verbs[0] = {};
AZALIA_ARRAY_SIZES;

36
src/mainboard/lenovo/x230/variants/x230s/overridetree.cb
View File

@ -1,36 +0,0 @@
chip northbridge/intel/sandybridge
# Enable DisplayPort Hotplug with 6ms pulse
register "gpu_dp_b_hotplug" = "4"
register "gpu_dp_c_hotplug" = "4"
register "gpu_dp_d_hotplug" = "4"
# Enable Panel as eDP and configure power delays
register "gpu_panel_port_select" = "1" # eDP
register "gpu_panel_power_backlight_off_delay" = "1" # 0.1ms
register "gpu_panel_power_backlight_on_delay" = "1" # 0.1ms
register "gpu_panel_power_down_delay" = "500" # 50ms
register "gpu_panel_power_up_delay" = "2000" # 200ms
device domain 0x0 on
subsystemid 0x17aa 0x2209 inherit
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
register "c2_latency" = "0x0065"
# X230s does not support docking
register "docking_supported" = "0"
register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }"
# Enable SATA ports 0 (HDD bay) & 1 (WWAN M.2 SATA)
register "sata_port_map" = "0x3"
device pci 1f.0 on # LPC bridge
chip ec/lenovo/h8 #
register "config1" = "0x05"
register "config3" = "0xc4"
register "event5_enable" = "0x3c"
register "evente_enable" = "0x1d"
# X230s only has BT on wlan card
register "has_bdc_detection" = "0"
end
end # LPC Controller
end
end
end