rockchip: rk3399: initialize display for eDP

This patch adds functions to init the display. To set up the display,
initialize the eDP and read the EDID.  Based on these, we then
set the clock for VOP, and finally enable VOP and backlight.

For a mainboard, it should set the vop_id, vop_mode and
framebuffer_bits_per_pixel in devicetree.cb.

For VOP_MODE_AUTO_DETECT, it will try eDP first and then
HDMI (which is not supported yet).

EDIT: Updated Makefile to only build in new files if
MAINBOARD_DO_NATIVE_VGA_INIT is enabled. All of these
platforms should have it enabled, so this shouldn't make
any difference except now, before the platform code is
in place.

BRANCH=none
BUG=chrome-os-partner:51537
TEST=test with the other patch

Change-Id: If935415026c945ab6ee128bd6bbdd792890aa24a
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: c1020cc806775629f4d5dc57bd805a9a12169386
Original-Change-Id: Ic32d0a251cb8e08aa5f0b15b2c06c4e02c08a761
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342336
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14857
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
This commit is contained in:
Shunqian Zheng 2016-05-04 16:21:36 +08:00 committed by Martin Roth
parent e747b7473e
commit d1cec75ce8
7 changed files with 196 additions and 0 deletions

View File

@ -55,6 +55,8 @@ ramstage-y += sdram.c
ramstage-y += ../common/spi.c
ramstage-$(CONFIG_DRIVERS_UART) += ../common/uart.c
ramstage-y += clock.c
ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += display.c
ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += ../common/edp.c
ramstage-y += emmc.c
ramstage-y += ../common/gpio.c
ramstage-y += gpio.c
@ -62,6 +64,7 @@ ramstage-y += ../common/i2c.c
ramstage-y += saradc.c
ramstage-y += soc.c
ramstage-y += timer.c
ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += ../common/vop.c
BL31_MAKEARGS += PLAT=rk3399
################################################################################

View File

@ -0,0 +1,32 @@
/*
* This file is part of the coreboot project.
*
* Copyright 2016 Rockchip Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __SOC_ROCKCHIP_RK3399_CHIP_H__
#define __SOC_ROCKCHIP_RK3399_CHIP_H__
#include <soc/gpio.h>
#include <soc/vop.h> /* for vop_modes enum used in devicetree.cb */
struct soc_rockchip_rk3399_config {
u32 vop_id;
gpio_t lcd_bl_pwm_gpio;
gpio_t lcd_bl_en_gpio;
u32 bl_power_on_udelay;
u32 bl_pwm_to_enable_udelay;
u32 framebuffer_bits_per_pixel;
u32 vop_mode;
};
#endif /* __SOC_ROCKCHIP_RK3399_CHIP_H__ */

View File

@ -0,0 +1,122 @@
/*
* This file is part of the coreboot project.
*
* Copyright 2016 Rockchip Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/cache.h>
#include <arch/mmu.h>
#include <arch/io.h>
#include <console/console.h>
#include <device/device.h>
#include <delay.h>
#include <edid.h>
#include <gpio.h>
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <soc/addressmap.h>
#include <soc/clock.h>
#include <soc/display.h>
#include <soc/edp.h>
#include <soc/gpio.h>
#include <soc/grf.h>
#include <soc/mmu_operations.h>
#include <soc/soc.h>
#include <soc/vop.h>
#include "chip.h"
void rk_display_init(device_t dev, uintptr_t lcdbase,
unsigned long fb_size)
{
struct edid edid;
uint32_t val;
struct soc_rockchip_rk3399_config *conf = dev->chip_info;
uintptr_t lower = ALIGN_DOWN(lcdbase, MiB);
uintptr_t upper = ALIGN_UP(lcdbase + fb_size, MiB);
enum vop_modes detected_mode = VOP_MODE_UNKNOWN;
printk(BIOS_DEBUG, "LCD framebuffer @%p\n", (void *)(lcdbase));
memset((void *)lcdbase, 0, fb_size); /* clear the framebuffer */
dcache_clean_invalidate_by_mva((void *)lower, upper - lower);
mmu_config_range((void *)lower, upper - lower, UNCACHED_MEM);
switch (conf->vop_mode) {
case VOP_MODE_NONE:
return;
case VOP_MODE_AUTO_DETECT:
/* try EDP first, then HDMI */
case VOP_MODE_EDP:
printk(BIOS_DEBUG, "Attempting to set up EDP display.\n");
rkclk_configure_vop_aclk(conf->vop_id, 192 * MHz);
/* select edp signal from vop0(big) or vop1(little) */
val = (conf->vop_id == 1) ? RK_SETBITS(1 << 5) :
RK_CLRBITS(1 << 5);
write32(&rk3399_grf->soc_con20, val);
/* select edp clk from SoC internal 24M crystal, otherwise,
* it will source from edp's 24M clock (that depends on
* edp vendor, could be unstable)
*/
write32(&rk3399_grf->soc_con25, RK_SETBITS(1 << 11));
rk_edp_init();
if (rk_edp_get_edid(&edid) == 0) {
detected_mode = VOP_MODE_EDP;
break;
}
printk(BIOS_WARNING, "Cannot get EDID from EDP.\n");
if (conf->vop_mode == VOP_MODE_EDP)
return;
/* fall thru */
case VOP_MODE_HDMI:
printk(BIOS_WARNING, "HDMI display is NOT supported yet.\n");
return;
default:
printk(BIOS_WARNING, "Cannot read any EDID info, aborting.\n");
return;
}
if (rkclk_configure_vop_dclk(conf->vop_id,
edid.mode.pixel_clock * KHz)) {
printk(BIOS_WARNING, "config vop err\n");
return;
}
edid.framebuffer_bits_per_pixel = conf->framebuffer_bits_per_pixel;
edid.bytes_per_line =
edid.mode.ha * conf->framebuffer_bits_per_pixel / 8;
edid.x_resolution = edid.mode.ha;
edid.y_resolution = edid.mode.va;
rkvop_mode_set(conf->vop_id, &edid, detected_mode);
rkvop_enable(conf->vop_id, lcdbase, &edid);
switch (detected_mode) {
case VOP_MODE_HDMI:
/* should not be here before HDMI supported */
return;
case VOP_MODE_EDP:
default:
if (rk_edp_enable()) {
printk(BIOS_WARNING, "edp enable error\n");
return;
}
mainboard_power_on_backlight();
break;
}
set_vbe_mode_info_valid(&edid, (uintptr_t)lcdbase);
}

View File

@ -59,6 +59,11 @@
#define TSADC_BASE 0xff260000
#define SARADC_BASE 0xff100000
#define RK_PWM_BASE 0xff420000
#define EDP_BASE 0xff970000
#define VOP_BIG_BASE 0xff900000 /* corresponds to vop_id 0 */
#define VOP_LIT_BASE 0xff8f0000 /* corresponds to vop_id 1 */
#define DDRC0_BASE_ADDR 0xffa80000
#define SERVER_MSCH0_BASE_ADDR 0xffa84000

View File

@ -0,0 +1,25 @@
/*
* This file is part of the coreboot project.
*
* Copyright 2016 Rockchip Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __SOC_ROCKCHIP_RK3399_DISPLAY_H__
#define __SOC_ROCKCHIP_RK3399_DISPLAY_H__
#define REF_CLK_24M (0x1 << 0)
void rk_display_init(device_t dev, uintptr_t lcdbase,
unsigned long fb_size);
void mainboard_power_on_backlight(void);
#endif

View File

@ -22,6 +22,7 @@ SECTIONS
POSTRAM_CBFS_CACHE(0x00100000, 1M)
RAMSTAGE(0x00300000, 256K)
DMA_COHERENT(0x10000000, 2M)
FRAMEBUFFER(0x10200000, 8M)
SRAM_START(0xFF8C0000)
BOOTBLOCK(0xFF8C2004, 32K - 4)

View File

@ -13,10 +13,12 @@
* GNU General Public License for more details.
*/
#include <bootmode.h>
#include <console/console.h>
#include <cpu/cpu.h>
#include <device/device.h>
#include <soc/addressmap.h>
#include <soc/display.h>
#include <stddef.h>
#include <stdlib.h>
#include <string.h>
@ -34,6 +36,12 @@ static void soc_init(device_t dev)
* arm-trusted-firmware/plat/rockchip/rk3399/include/platform_def.h
*/
mmio_resource(dev, 1, (0x10000 / KiB), (0x80000 / KiB));
if (IS_ENABLED(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) && display_init_required())
rk_display_init(dev, (uintptr_t)_framebuffer,
_framebuffer_size);
else
printk(BIOS_INFO, "Display initialization disabled.\n");
}
static struct device_operations soc_ops = {